Searched for "40101701"
Seasons Package Terminal Exterior Architectural Grille is to be used with Seasons Packaged Terminal Air Conditioners (PTACs). The grille is to be used outside and with the Seasons PTAC Wall Sleeve. The Seasons PTAC Exterior Architectural Grille will protect the PTAC chassis from wind an drain, prolonging the life of your air conditioner unit.
- Seasons PTAC exterior architectural grille is designed to work with Garrison PTAC and other popular PTAC models
- Exterior grille should be installed by a professional
- Seasons package terminal exterior architectural grille is mode of sturdy aluminum for long lasting finish that can be easily cleaned
- Seasons package terminal exterior architectural grille is 42 in. W x 16 in. H
This is a genuine Goodman part. It is designed for HVAC applications. It is manufactured with durability in mind.
- Color: Gray
- 1/4 Horse Power
- Wall Sleeve
- Brand: Amana
Drain Kit, For Amana PTAC Air Conditioners DK900D Condensate Drain Kit for Internal or External Disposal of Condensate. The condensate drain attaches to the wall sleeve base pan or the wall sleeves outside corners for controlled indoor / outdoor disposal of condensate. Install the wall sleeve in the wall before an indoor / outdoor drain kit is installed.
- Kit is used to control condensate from the unit
- Amana drain kit attaches to the base of the wall sleeve
- Designed to fit model WS900E wall sleeve
- Interior or exterior condensate drain applications
The Gray Room Air Conditioner Rear Grille is designed as a replacement grille for the one on existing J wall cases. The grille comes with a 1-year warranty for your convenience. This Air Conditioner Rear Grille is 16 in. height.
- Used to replace exterior grille on existing J wall cases
- Grille included on new RAB46/47/48 wall cases (sold separately)
- 16 in. height
- 1-year warranty
The RAK7023 is a Duct Transition for Replacement of AZC with Slanted-Front AZ Chassis. Allows extension without relocation of the product saving time and money. Lines up for easy installation on the original chassis flat-top.
- Allows duct installation where the original chassis was a slope-front discharge chassis
- Accessory is compatible with the following GE models: (AZC/AZR/AZ21/AZ31)
- Allows existing duct extension to be used without requiring relocation of wall hole
- Room air conditioner accessory
230/208-Volt 20 Amp Power Cord Kit for AZ45/AZ65 series Zoneline Room Air Conditioners. Accessory provides power supply to your AZ45/AZ65 series GE Zoneline Air Conditioner unit. Designed for GE Zoneline AZ45/AZ65 Air Conditioners
- 6 ft. power cord with LCDI
- Low-voltage personality plug
- 4-pin connector
- 20 Amp
- Limited 1 year warranty
- The correct kit for the installation is determined by the voltage and amperage of the electrical circuit and the means of connecting the unit to the building wiring
- For use with the following AZ Series units: AZ41E09DAB, AZ41E12DAB, AZ41E15DAB, AZ61H09DAB, AZ61H12DAB & AZ61H15DAB
- *Electric Heat Amps include electric heater and fan motor current draw
The GE 30 Amp LCDI Cord is a 6 ft. power cord with LCDI. The low-voltage personality plug allows for easy installation. The 6 ft. power cord allows convenient reach to most outlets.
- 4-pin connector
- 30 Amp
- Low-voltage personality plug
- 6 ft. power cord with LCDI
- Selectable high (1500-Watt) and low (750-Watt) settings let you adjust the fireplace's heat output
- Accepts a 1 in. filter
This is a genuine GOODMAN replacement part. Equipment should be sized, selected and installed by a qualified professional to ensure proper installation, safe operation, adherence to federal, state and local codes and for valid warranty. See installation guide for more details. Professional installation recommended.
- DigiSmart antenna mounts inside the Amana DigiSmart PTAC, hidden from sight
- Powered through the PTAC and requires no batteries
- Easy to service with on-board led diagnostics
- Digitenna
GE Standard Wall Case, fits the AZ45 and AZ65 GE Zoneline Series. Protected with a sealing compound to prevent rust. Baked on enamel keeps this wall case from rusting and maintaining its galvanized steel casing.
- Galvanized steel
- Baked-on enamel
- Color matched for AZ45/65 series
- Expanded polystyrene foam insulation
- Limited 1-Year Warranty entire Appliance
GE appliances provide up-to-date technology and exceptional quality to simplify the way you live. With a timeless appearance, this family of appliances is ideal for your family. And, coming from one of the most trusted names in America, you know that this entire selection of appliances is as advanced as it is practical.
- Zoneline filter
- PTAC air filter
- Rectangular shape
- Limited 1 year warranty
The RAK315P is a 15 Amp LCDI Cord with a 6 ft. reach. The cords reach allows for convenient placement without having to adjust outlet. The personality plug allows for easy installation.
- 6 ft. power cord with LCDI
- 4-pin connector
- Low-voltage personality plug
- 15 Amp
GE appliances provide up-to-date technology and exceptional quality to simplify the way you live. With a timeless appearance, this family of appliances is ideal for your family. And, coming from one of the most trusted names in America, you know that this entire selection of appliances is as advanced as it is practical.
- Zoneline Filter
- PTAC Air Filter
- Round shape
- Limited 1 Year Warranty
This standard stamped exterior grille is designed for use with WS900D wall sleeve (sold separately). It is constructed from stamped aluminum. This grille must be field installed.
- Length: 42 in.
- Width: 16.5 in.
- Aluminum finish
- Must be field installed
This knob adjusts the air conditioner settings. The color of this part is white. Installation time is around 5 min.
- Color of part is white
- Installation time is around 5 min
- Helps set the air conditioner settings
- Weight of part .0125 lbs.
Galvanized steel is prepared in a multi-step process for stronger paint adhesion. Powder coated with a polyester finish. Cured in an oven for exceptional durability.
- The sleeve is insulated for thermal efficiency
- The wall sleeve is insulated to reduce noise
- For use with FRIEDRICH PTACSs
- Wall sleeve
The Seasons packaged terminal air conditioner sleeve is used when installing packaged terminal air conditioners (PTACs) model air conditioners. This is a universal design that should work with standard 42 in. W x 16 in. H size PTACs on the market. This is not designed to work with any other type of air conditioner. Wall sleeves are recommended to be installed by a professional and designed to hold PTACs air conditioners.
- Fits all garrison PTAC models and most competitor models built for a 42 in. W x 16 in. H the standard size of PTACs
- Designed for use in packaged terminal air conditioner (PTAC) installations only
- Wall sleeves are required when installing PTAC air conditioner
- Foldable design for easy shipping
This outdoor louver grille is made of stamped aluminum. It is anodized to resist chalking, corrosion and oxidation. A grille is required for all new installations.
- Grille is made for FRIEDRICH 42 in. PTAC units
- Insulated wall sleeve PDXWSA sold separately
- Architectural grilles also available
- Wall outdoor louver
Universal power cords enable properties to select the appropriate heater size. For use in FreshAire PTAC Models. They're used for applications such as providing support for AC units and wiring to an electrical source.
- Universal cords
- LCDI 230-Volt 15 Amp cord - 2.5 kW
- 27.5 in. length
- For use with Friedrich FreshAire PTAC models
Universal power cords enable properties to select the appropriate heater size. LCDI 230-Volt 15 Amp Cord - 2.5 kW. For use with: FRIEDRICH PTAC ZoneAire Premier.
- LCDI 230-Volt 15 Amp cord - 2.5 kW
- 67 in. length
- Material: plastic
- Plug configuration: 6-15p
Midea. Genuine Oem Replacement Part. New In Oem Packaging. Recommended Installation By A Trained And Licensed Ptac/Hvac Repair Technician. Additional Parts Available Through Special Orders. Mfg #17400103000055
- Genuine Oem Replacement Part
- New In Oem Packaging
- Recommended Installation By A Trained And Licensed Ptac/Hvac Repair Technician
- Additional Parts Available Through Special Orders
Midea FILTER. Genuine Oem Replacement Part. New In Oem Packaging. Recommended Installation By A Trained And Licensed Ptac/Hvac Repair Technician. Additional Parts Available Through Special Orders. Mfg #12120300001288
- Genuine Oem Replacement Part
- New In Oem Packaging
- Recommended Installation By A Trained And Licensed Ptac/Hvac Repair Technician
- Additional Parts Available Through Special Orders
Midea DISCHARGE TEMPERATURE SENSOR. Genuine Oem Replacement Part. New In Oem Packaging. Recommended Installation By A Trained And Licensed Ptac/Hvac Repair Technician. Additional Parts Available Through Special Orders. Mfg #11201007003427
- Genuine Oem Replacement Part
- New In Oem Packaging
- Recommended Installation By A Trained And Licensed Ptac/Hvac Repair Technician
- Additional Parts Available Through Special Orders
The RAK601B is a Duct Extension, Register and Trim Flange. Additional air register and trim flange can be ordered separately if 2 extensions are made. For use with RAK6053.
- 44 in. L
- Includes air register and trim flange for secondary space
- Limited 1 year warranty
- Room air conditioner accessory
Midea BRUSHLESS DC MOTOR. Genuine Oem Replacement Part. New In Oem Packaging. Recommended Installation By A Trained And Licensed Ptac/Hvac Repair Technician. Additional Parts Available Through Special Orders. Mfg #11002015018132
- Genuine Oem Replacement Part
- New In Oem Packaging
- Recommended Installation By A Trained And Licensed Ptac/Hvac Repair Technician
- Additional Parts Available Through Special Orders
2-part sleeve that telescopes in and out and sits inside the exterior wall penetration for use with Friedrich vertical package air conditioners (VPAK). This is a required accessory for installation of Friedrich's VPAK. Vertical package terminal AC accessory.
- Required accessory for FRIEDRICH vertical package air conditioners
- 2-part sleeve
- Wall plenum telescopes from 8 in. to 14 in.
- VPAK accessory
Midea AXIAL FLOW FAN. Genuine Oem Replacement Part. New In Oem Packaging. Recommended Installation By A Trained And Licensed Ptac/Hvac Repair Technician. Additional Parts Available Through Special Orders. Mfg #12100105000064
- Genuine Oem Replacement Part
- New In Oem Packaging
- Recommended Installation By A Trained And Licensed Ptac/Hvac Repair Technician
- Additional Parts Available Through Special Orders
Midea ROOM TEMPERATURE SENSOR. Genuine Oem Replacement Part. New In Oem Packaging. Recommended Installation By A Trained And Licensed Ptac/Hvac Repair Technician. Additional Parts Available Through Special Orders. Mfg #11201007003443
- Genuine Oem Replacement Part
- New In Oem Packaging
- Recommended Installation By A Trained And Licensed Ptac/Hvac Repair Technician
- Additional Parts Available Through Special Orders
Midea FAN MOTOR CAPACITOR. Genuine Oem Replacement Part. New In Oem Packaging. Recommended Installation By A Trained And Licensed Ptac/Hvac Repair Technician. Additional Parts Available Through Special Orders. Mfg #17400101A00484
- Genuine Oem Replacement Part
- New In Oem Packaging
- Recommended Installation By A Trained And Licensed Ptac/Hvac Repair Technician
- Additional Parts Available Through Special Orders
Universal power cords enable properties to select the appropriate heater size. LCDI 230-Volt 20 Amp Cord - 3.5 kW. Plug configuration: 6-20p. For use with: FRIEDRICH PTAC Zone Aire Premier.
- LCDI 230-Volt
- 67 in. L
- Material: plastic
- Plug configuration: 6-20p
Midea BEARING BASE. Genuine Oem Replacement Part. New In Oem Packaging. Recommended Installation By A Trained And Licensed Ptac/Hvac Repair Technician. Additional Parts Available Through Special Orders. Mfg #12622000000012
- Genuine Oem Replacement Part
- New In Oem Packaging
- Recommended Installation By A Trained And Licensed Ptac/Hvac Repair Technician
- Additional Parts Available Through Special Orders
Galvanized steel is prepared in a state-of-the-art multistep process for stronger paint adhesion. Then powder coated with a polyester finish and cured in an oven for exceptional durability. The wall sleeve is insulated for thermal efficiency and noise reduction.
- Extended wall sleeve
- For use with FRIEDRICH PTACs
- 1-piece
- For walls up to 17-1/2 in. deep
Hinged panel door allows access to unit and return air filter. This door is a right hand swing. Dimensions are 30 inches wide by 60 inches high. The panel is painted steel in white color. Optional accessory for Friedrich vertical package air conditioners.
- Hinged panel door
- Painted steel
- Right hand swing door
- Accessory for Friedrich VPAK
The GE Standard Sub-Bases with Power Cord Included is made of heavy-gauge steel. Includes a full base enclosure with breakaway side channels. 4-pin connector.
- 4-point leveling legs
- May also be used as a non-electrical sub-base to support the unit
- Sub-base adapts to service conduit, circuit breakers and receptacles up to 20 Amp
- Room air conditioner accessory
Midea MAIN CONTROL BOARD SUBASSEMBLY. Genuine Oem Replacement Part. New In Oem Packaging. Recommended Installation By A Trained And Licensed Ptac/Hvac Repair Technician. Additional Parts Available Through Special Orders. Mfg #17120300005835
- Genuine Oem Replacement Part
- New In Oem Packaging
- Recommended Installation By A Trained And Licensed Ptac/Hvac Repair Technician
- Additional Parts Available Through Special Orders
For more positive control of condensate water, the RAD10 drain kit routes condensate to the exterior or to the interior of the building through the wall case. Suitable provision (field applied) should be made to connect the RAD10 drain tube to a drain system in the building. Drain tube assemblies are 1/2 in. O.D. copper and consist of a short right-angle tube and a 6 in. long straight tube to suit the particular application.
- For more positive control of condensate water, the drain kit routes condensate to the exterior or to the interior of the building through the wall case
- Suitable provision (field applied) should be made to connect the RAD10 drain tube to a drain system in the building
- Drain tube assemblies are 1/2 in. O.D. copper and consist of a short right angle tube and a 6 in. long straight tube to suit the particular application
- Be sure to check the model to insure this kit will fit
Fresh air purifier by iWave features needlepoint bi-polar ionization to address any mold, bacteria, virus, allergens, and VOC's that may be in your air stream to ensure delivery of healthy, clean, purified air. IWave-m is a flexible ion-generating bar that can treat IAQ in nearly any HVAC application. The air purifier provides the highest level of ionization energy in the most compact size available in the market, producing 35 million ions/cc. The highly versatile iWave-m is low maintenance with no replacement parts. As the air flows past the iWave-m, the device emits positive and negative ions, creating a plasma region that purifies the air, killing mold, bacteria and viruses in the coil and living space. The ionization process also reduces allergens, smoke and static electricity, as well as controlling odors (cooking, pet, VOCs) and other particles (no more sunbeams) in the air without creating ozone or any harmful byproducts. The circuit bar is chemical resistant and highly durable for long service life. Plus, it can be folded to length in the field to any size and uses hook and loop fastener material for the flexible bar and power pack for easy installation. It is perfect for ductless HVAC systems - specifically mini-splits, commercial VRF coils, PTAC systems. The iWave-m is the most versatile and novel product on the market to address air quality for any HVAC system to solve mold issues common in hard-to-clean ductless systems.
- Duct systems up to 6 tons (2400 CFM)
- 3-year warranty (through Nu-Calgon)
- Universal voltage input - 24-Volt AC to 240-Volt AC
- Needle point ionization actively treats air in the living space
- Universal mounting with magnets
Midea AIR OUTLET FRAME. Genuine Oem Replacement Part. New In Oem Packaging. Recommended Installation By A Trained And Licensed Ptac/Hvac Repair Technician. Additional Parts Available Through Special Orders. Mfg #12120300003184
- Genuine Oem Replacement Part
- New In Oem Packaging
- Recommended Installation By A Trained And Licensed Ptac/Hvac Repair Technician
- Additional Parts Available Through Special Orders
GE 42" Zoneline Architectural Polycarbonate Grille - Color Maple. 42" Ge Zoneline Architectural Polycarbonate Grille - Color Maple. Mfg #RAG42PB
- 42" Ge
- Architectural Polycarbonate Grille
- Polycarbonate Grille
- Color Maple
Provides unit support for walls less than 6 in. thick. Includes leveling legs, side filler panels, mounting brackets, a plug-in receptacle and field-wiring access. The subbase also includes electrical knockouts for power disconnect switch or circuit breaker.
- Includes leveling legs, side filler panels, mounting brackets
- Includes a plug-in receptacle and field-wiring access
- Also, includes electrical knockouts for power disconnect switch or circuit breaker
- For use with Friedrich PTACs
Midea PANEL FRAME SUBASSEMBLY. Genuine Oem Replacement Part. New In Oem Packaging. Recommended Installation By A Trained And Licensed Ptac/Hvac Repair Technician. Additional Parts Available Through Special Orders. Mfg #12120300000261
- Genuine Oem Replacement Part
- New In Oem Packaging
- Recommended Installation By A Trained And Licensed Ptac/Hvac Repair Technician
- Additional Parts Available Through Special Orders
Midea CONTROL BOARD. Genuine Oem Replacement Part. New In Oem Packaging. Recommended Installation By A Trained And Licensed Ptac/Hvac Repair Technician. Additional Parts Available Through Special Orders. Mfg #12120300007046
- Genuine Oem Replacement Part
- New In Oem Packaging
- Recommended Installation By A Trained And Licensed Ptac/Hvac Repair Technician
- Additional Parts Available Through Special Orders
Additional plenum used with the Lateral Duct Adapter. A maximum of 3 duct extensions may be used together. Ducted airflow is reduced as duct length is increased.
- 3 ft. duct extension
- Allows one PTAC unit to heat or cool 2 rooms
- Duct extension mounts to the wall sleeve and can be installed for either right or left side duct applications
- For use with Friedrich PTACs
Midea CROSS FLOW FAN. Genuine Oem Replacement Part. New In Oem Packaging. Recommended Installation By A Trained And Licensed Ptac/Hvac Repair Technician. Additional Parts Available Through Special Orders. Mfg #12100102000055
- Genuine Oem Replacement Part
- New In Oem Packaging
- Recommended Installation By A Trained And Licensed Ptac/Hvac Repair Technician
- Additional Parts Available Through Special Orders
Midea DISCHARGE TEMPERATURE SENSOR. Genuine Oem Replacement Part. New In Oem Packaging. Recommended Installation By A Trained And Licensed Ptac/Hvac Repair Technician. Additional Parts Available Through Special Orders. Mfg #11201007003124
- Genuine Oem Replacement Part
- New In Oem Packaging
- Recommended Installation By A Trained And Licensed Ptac/Hvac Repair Technician
- Additional Parts Available Through Special Orders
Universal power cords enable properties to select the appropriate heater size. For use in FreshAire PTAC Models. They're used for applications such as providing support for AC units and wiring to an electrical source.
- Universal cords
- Non-LCDI 265-Volt 15 Amp cord - 2.5 kW
- 27.5 in. length
- For use with Friedrich ZoneAire FreshAire PTAC models
Midea MAIN CONTROL BOARD SUBASSEMBLY. Genuine Oem Replacement Part. New In Oem Packaging. Recommended Installation By A Trained And Licensed Ptac/Hvac Repair Technician. Additional Parts Available Through Special Orders. Mfg #17120300005834
- Genuine Oem Replacement Part
- New In Oem Packaging
- Recommended Installation By A Trained And Licensed Ptac/Hvac Repair Technician
- Additional Parts Available Through Special Orders
Midea CONDENSER ASSEMBLY. Genuine Oem Replacement Part. New In Oem Packaging. Recommended Installation By A Trained And Licensed Ptac/Hvac Repair Technician. Additional Parts Available Through Special Orders. Mfg #15820300002883
- Genuine Oem Replacement Part
- New In Oem Packaging
- Recommended Installation By A Trained And Licensed Ptac/Hvac Repair Technician
- Additional Parts Available Through Special Orders
