Searched for "40101600"
Ceramic fuse link for HX Fan Coil Units
- Yellow color code
- Opens at 300 degree F
- GSA approved
- Provides reliable back-up protection for temperature controlling thermostats.
- Applied to millions of appliances and personal care products.
- Used in office machines, portable heaters and industrial equipment as a thermal safeguard.
- 10 Amps @ 250VAC
Heavy-Duty Round Brass Cap with Neoprene Seal. Brass cap common to HVAC applications. Made of CDA 360 brass.
- Brass construction
- Industry standard cap
- Neoprene seal
- 1/4 in.
Hard start relay and start capacitor, gives additional starting torque up to 500%. For all single phase 120/288VAC units from 1/2 through 10 HP. 2 wire connection to existing run cap for easy installation. For severe Low-Voltage or hard starting compressors.
- Residential and commercial PSC A/C units and heat pumps
- Can be used on 120 thru 288 VAC units
- Room A/C units
- Installs in seconds across run capacitor terminals
This is a genuine part. Built with durability in mind. Transformer.
- 230-Volt to 24-Volt - for use with GOODMAN and Amana equipment
- Transformer
- Color: gray
- 240-Volt
Valve core with Teflon seal. Compatible with most refrigerants. Industry standard valve cores.
- Replaces SF1515
- Steel construction
- Use with most refrigerants
- Neoprene seal
The only valve with a permanent, patented gasket to provide 50 times more sealing area then standard O-ring type valves. Safe for use on the Low Side of R410 systems. A sealing force of over 180 in. lbs., torque tested with 450 lbs. pressure tested at 250F. Patented valve gasket provides 50 times more sealing area than competitive O-ring types.
- Corrosion resistant
- Piercing needle is engineered for concentricity and hardness to insure perfect seating every time
- 500 psi maximum pressure
- Non-positional mounting, no adapter valve required
- Requires only 2 in. clearance for installation and operation
- Hex key wrench included
SXT105 is designed for use in AC Controls Systems including air conditioning circuits, thermostats, gas valves, relays or other applications that do not exceed the listed ratings. SXT105 can be used to replace any transformer of same primary voltage and equal or lower VA ratings. This transformer uses a foot mount design.
- Foot mount
- Primary: 120-Volt / 208-Volt / 240-Volt
- Secondary: 24-Volt
- Output VA: 40 VA
Liquid Line Solid Core Filter Drier. 3 in. ODF, 6.22 in. x 2.5 in. Flow Capacity (ARI Standard 710.86) Tons at 1 psi Delta P Refrigerant 134A=4.4, R-22=4.8, R410A=4.9, R-404A/R507=3.2. Economical system protection for residential air. conditioning ODF - solid copper connections for easy installation Solid core construction with 40 micron filtration Maximum working pressure = 680 psi For use with CFC, HCFC, and HFC refrigerants.
- Economical system protection for residential air conditioning
- ODF - solid copper connections for easy installation
- Solid core construction with 40 micron filtration
- Maximum working pressure = 680 psi
- For use with CFC, HCFC, and HFC refrigerants
These fittings are designed to meet most all residential, industrial and irrigation/agricultural needs. Smooth inner walls allow for low pressure drops and resistance to chemicals and corrosion. Founded in 1971, Diversitech Corporation is North Americas largest manufacturer of equipment pads and a leading manufacturer and supplier of components and related products for multiple industries, including: HVACR, electrical, consumer hardware retail, electrical utility, automotive retail and pool and spa channel. Diversitechs mission for its wholesaler partners is to simplify their work. We do this by offering more than 200 product categories all from a single manufacturing/supplier source to create product availability and supply chain cost advantages for our customers in every market we serve. We also leverage best-in-class customer service to react quickly and professionally to every customer request.
- These fittings are designed to meet most all residential, industrial and irrigation/agricultural needs
- Smooth inner walls allow for low pressure drops and resistance to chemicals and corrosion
- Highly versatile, lightweight and easy to install
- White
- Traps (slip x slip)
0130F00041 GOODMAN Replacement Furnace Pressure Switch complies with warranty parts requirements for GOODMAN HVAC Equipment. GOODMAN Replacement parts are direct OEM replacements that requires no modifications for ease of replacement. Please review your GOODMAN Equipment Product Specifications to ensure that 0130F00041 replacement Furnace Pressure Switch is the applicable replacement part for your system.
- For use in GOODMAN and Amana furnaces
- Genuine OEM replacement part
- Be sure to reference furnace model and version for appropriate replacement part
- OEM part requires no modification for easy installation
Hardstart relay and start capacitor, gives additional starting torque up to 300% for all single phase 120/288 VAC units from 1/2 through 10 HP. 2 wire connection to existing run cap for easy installation. For low voltage and hard starting compressors.
- Residential and commercial PSC A/C units and heat pumps
- Can be used on 120 through 288 VAC units
- Room A/C units
- Installs in seconds across run capacitor terminals
Hard Start Kit Positive Temperature Coefficient (PTC) Relay and Start Capacitor SPP Series. PTC Positive Temperature Coefficient Relay and Capacitor. NATE Recognized (Course #1867-0002). Can be used on PSC type compressors.
- Easy 2-wire installation
- Increase in torque 600%
- Most economic
- UL recognized
Bi-Directional Solid Core Heat Pump Drier, 3/8 in. ODF, 6.31 in. x 2.63 in. R-410A Flow Capacity Tons at 1 psi Delta P 5.2. Economical system protection for residential air conditioning and ODF - solid copper connections for easy installation . Solid core construction with 40 micron filtration, Maximum working pressure = 680 psi. For use with CFC, HCFC, and HFC refrigerants.
- Economical system protection for residential air conditioning
- ODF - solid copper connections for easy installation
- Solid core construction with 40 micron filtration
- Maximum working pressure = 680 psi
- For use with CFC, HCFC, and HFC refrigerants
ACS-4 In-line switch is designed to detect condensate drain line clogs or blockages and shut off equipment or alert users to the potential overflow condition. ACS-4 installs on 3/4 in. PVC condensate drain pipe in either a horizontal or vertical position. Using the included 3/4 in. drain pan fitting, ACS-4 can also be installed directly at the drain pan primary or auxiliary outlet to detect pan overflow.
- Installs horizontally or vertically for confined spaces
- Reliable mechanical switch and polymer float
- Shuts off equipment when clog or blockage backs up condensate water in the drain line
- Can be simultaneously be connected to a warning light, audible alarm circuit or BMS/BAS system in addition to connection for equipment shut down
Thermal cut-offs provide protection against overheating when the design limit temperature of a circuit is reached. Thermal cut-offs are temperature sensitive, one-time devices which open the circuit when operating temperatures exceed the rated temperature of the cut-off . Open: 333 degree F.
- Provides reliable back-up protection for temperature controlling thermostats
- Applied to millions of appliances and personal care products
- Applied in office machines, portable heaters and industrial equipment as a thermal safeguard
- 5 per pack
20162904 GOODMAN Replacement Furnace Pressure Switch complies with warranty parts requirements for GOODMAN HVAC Equipment. GOODMAN Replacement parts are direct OEM replacements that requires no modifications for ease of replacement. Please review your GOODMAN Equipment Product Specifications to ensure that 20162904 replacement Furnace Pressure Switch is the applicable replacement part for your system.
- For use in GOODMAN and Amana furnaces
- Genuine OEM replacement part
- Be sure to reference furnace model and version for appropriate replacement part
- OEM part requires no modification for easy installation
This replaces manufacturers numbers: JMPO-102-4C, 03336A-000. It is a replacement sail switch. It is black in color.
- Replaces industry numbers: 251010, 53-5152, PRS486754, DRS32346A
- Designed for magic-pack, magic-chef, and comfort pack
- 5A at 125VAC, 3A at 250-VAC
- UL Listed
The 5-2-1 compressor saver protects vital air conditioner components by significantly reducing the amount of time it takes for your compressor to start, in some cases up to 50%. This means that your air conditioner and compressor will bear half the stress, strain, and heat each and every time it starts. This compressor might save thousands of dollars by not having to replace the air conditioner.
- 3 wire hard start kit is pre-wired potential relay and start capacitor
- Reduces time compressor is on high amp start up, which helps prevent the dimming effect of household lighting
- Three color coded wires to connect for ease of installation Instant re-start
- For use on reciprocating and scroll compressors
Fusible link assemblies are safety devices mounted in ceramic holders. Tear drop shaped ceramic holders with a screw mounting hole at the small end and two 1/4" quick connects for convenient hook-up. Open: 300 degree F.
- Provides reliable back-up protection for temperature controlling thermostats
- Applied to millions of appliances and personal care products
- Applied in office machines, portable heaters and industrial equipment as a thermal safeguard
- Sold 5 per pack
Liquid Line Solid Core Filter Drier. 3/8 in. ODF, 4.53 in. X 2.5 in. Flow Capacity (ARI Standard 710.86) Tone at 1 psi Delta P Refrigerant 134a=4.1, R-22=4.4, R410A=4.5, R-404A/R507=2.9. Economical system protection for residential air conditioning. ODF - solid copper connections for easy installation. Solid core construction with 40 micron filtration. Maximum working pressure = 680 psi. For use with CFC, HCFC, and HFC refrigerants.
- Economical system protection for residential air conditioning
- ODF - solid copper connections for easy installation
- Solid core construction with 40 micron filtration
- Maximum working pressure = 680 psi
- For use with CFC, HCFC, and HFC refrigerants
Finally, a product that simplifies the repair of burned or damaged spade terminals when reconnecting or replacing a compressor. Founded in 1971, Diversitech Corporation is North Americas largest manufacturer of equipment pads and a leading manufacturer and supplier of components and related products for multiple industries, including: HVACR, electrical, consumer hardware retail, electrical utility, automotive retail and pool and spa channel. Diversitechs mission for its wholesaler partners is to simplify their work. We do this by offering more than 200 product categories all from a single manufacturing/supplier source to create product availability and supply chain cost advantages for our customers in every market we serve. We also leverage best-in-class customer service to react quickly and professionally to every customer request.
- Fits both non-burned and burned terminals
- Connects to the compressor via precision brass cylinders that fit over the terminals and connect with stainless steel set screws
- Easy to install and guaranteed for the life of the compressor
- Wires are permanently attached
- Standard factory 600V, 65 strand machine wire
Copeland R-410A Scroll Compressor Model ZP25LXE-PFV-800. Aftermarket Replacement Compressor. Drop In Replacement For Zp Models. 25,095 Btu. R-410a. Single Phase. 208/230 V. Run Cap 35/440. Stub Connections. Square Mount Base. Molded Plug. Mfg #ZP25LXE-PFV-800
- Aftermarket Replacement Compressor
- Drop In Replacement For Zp Models
- 25,095 Btu
- R-410a
Hard starts relay and start capacitor combination, gives maximum torque possible for all single phase units from 1/12 through 10 HP. The simple 2 wire connection is Voltage sensing and has instant restart capability. A backup electronic timing circuit protects the compressor.
- Electronic potential relay (EPR) technology and 330 VAC start capacitor
- UL recognized file E146162
- Can be used on PSC and CSIR type compressors
- Voltage sensing 90V-277V
Copeland R-410A Scroll Compressor Model ZP21LXE-PFV-800. Aftermarket Replacement Compressor. Drop In Replacement For Zp Models. 30,799 Btu. R-410a. Single Phase. 208/230 V. Run Cap 40/440. Stub Connections. Square Mount Base. Molded Plug. Mfg #ZP31LXE-PFV-800
- Aftermarket Replacement Compressor
- Drop In Replacement For Zp Models
- 30,799 Btu
- R-410a
2 tools in 1. A core wrench and thread chaser cap, complete with a core carrying case and 6 cores. The valve cores are stainless steel and brass. The cores are rated for CFC, HCFC and HFC refrigerants. The cores are pressure rated for R410A and manufactured to ARI 720-97 standard.
- Carrying case can hold several additional cores
- Multi-use tool acts as cap for carrying case
- Length: 3.5 in.
- 6 valve cores included
- Magic-Pak Pressure Switch (.40)
- use with 51HWC and 60HWV series units
- Pink
- Replaces R44819-011, R43336-011, R41862-001 and R39086B001
- Magic-Pak Pressure Switch (.40)
- Replaces R44819-011
- Replaces R43336-011
- Replaces R39086B001
1.0 - 3.0 ton maximum torque Hard Start Device for single phase 208-Volt, 230-Volt and 265-Volt A/C, refrigeration and heat pump compressors. Hard start devices extend the life of compressors considerably by bringing them up to full speed more quickly and efficiently. They also assist compressors in starting under very adverse ambient conditions such as low voltage or high head pressures.
- 2-wired starting device that uses a mechanical potential relay and start capacitor
- 1-3 ton unit
- Assists compressor startup under adverse conditions
- Reduce stress on compressor during start up
- Extend the life of compressors
- OEM tested and approved
- Recommended for: single phase 208 V, 230 V, and 265 V A/C, refrigeration and heat pump compressors
- Handles 1.0 ‒ 3.0 ton
- Product Code: 96503
These fittings are designed to meet most all residential, industrial and irrigation/agricultural needs. Smooth inner walls allow for low pressure drops and resistance to chemicals and corrosion. Founded in 1971, Diversitech Corporation is North Americas largest manufacturer of equipment pads and a leading manufacturer and supplier of components and related products for multiple industries, including: HVACR, electrical, consumer hardware retail, electrical utility, automotive retail and pool and spa channel. Diversitechs mission for its wholesaler partners is to simplify their work. We do this by offering more than 200 product categories all from a single manufacturing/supplier source to create product availability and supply chain cost advantages for our customers in every market we serve. We also leverage best-in-class customer service to react quickly and professionally to every customer request.
- These fittings are designed to meet most all residential, industrial and irrigation/agricultural needs
- Smooth inner walls allow for low pressure drops and resistance to chemicals and corrosion
- Highly versatile, lightweight and easy to install
- White
- Traps (slip x slip)
White-Rodgers suction line drier system protector. Remove and filters refrigerant with 40 micron filtration. 5/8 in. ODF. For use with CFC, HCFC and HFC refrigerants.
- Solid block desiccant core effectively removes and holds a maximum amount of contaminants with minimal pressure drop
- Provides high moisture, organic and inorganic acid removal, binding material within the core protects the core from acid decomposition and allows the core to collect and hold the acids from a motor burnout
- For use with CFC, HCFC and HFC refrigerants
- Maximum working pressure of 680 psi
- Solid core construction with 40 mic filtration
- 6/8 in. ODF solid copper connections for easy installation
High Altitude Pressure Switch for 33" Furnace Single Stage 80%
- Source 1
- Model S1-1PS3301
- 33"
- Single Stage
Precision machined from high grade brass and covered by shielding aluminum shroud, and special tools are needed to apply/remove Novent caps. All caps are embossed and color-coded. Proper installation helps stop accidental refrigerant mixing in A/C systems.
- Resists crushing and removal without key
- Corrosion resistant anodized aluminum
- Integral neoprene O-ring resists oils and sealants
- Torque limiter prevents overtightening
Copeland R-410A Scroll Compressor Model ZP51LXE-PFV-800. Aftermarket Replacement Compressor. Drop In Replacement For Zp Models. 15,451 Btu. R-410a. Single Phase. 208/230 V. Run Cap 35/440. Stub Connections. Square Mount Base. Molded Plug. Mfg #ZP16LXE-PFV-800
- Aftermarket Replacement Compressor
- Drop In Replacement For Zp Models
- 15,451 Btu
- R-410a
Hard start kit 3-1/2, 4, 5
- High-quality steel housing for enhanced durability
- Conveniently holds water at a capacity of up to 19 gal.
- Efficiently operates at a maximum pressure of up to 100 PSI
- Electrostatically applied polyester paint resists corrosion
MUELLER STREAMLINE 7/8 OD ACR P X P COUPLG. Sizes Ranging From 1/4 – 1-1/8. 10-Year Limited Warranty. Dualseal Ring Design. Force 360 Press Contour. Packaged In Economical Quantities. Clean, Clear Resealable Poly Bags. Cad/Bim Content Available. Mfg #RP10146
- 10-Year Limited Warranty
- Dualseal Ring Design
- Force 360 Press Contour
Goodman OEM Pressure Switch. Style: Front Cover.
MUELLER STREAMLINE 1-1/8 X 7/8 OD PXP CPLG. Sizes Ranging From 1/4 – 1-1/8. 10-Year Limited Warranty. Dualseal Ring Design. Force 360 Press Contour. Packaged In Economical Quantities. Clean, Clear Resealable Poly Bags. Cad/Bim Content Available. Mfg #RP01049
- 10-Year Limited Warranty
- Dualseal Ring Design
- Force 360 Press Contour
This is a genuine GOODMAN replacement part. Equipment should be sized, selected and installed by a qualified professional to ensure proper installation, safe operation, adherence to federal, state and local codes and for valid warranty. See installation guide for more details. Professional installation recommended.
- GOODMAN OEM thermal expansion valve
- Tons: 2.0-Ton to 3.0-Ton
- Refrigerant R-410A
- Kit, 3-Ton non-bleed r410a txv
A versatile transformer that can be used for many different applications. Accepts input voltages of 120 VAC, 208 VAC and 240 VAC and provides a choice of secondary voltages of 2.5 VAC, 8 VAC, 12 VAC, 16 VAC and 24 VAC. Enclosed frame - plate, foot or knock-out mount.
- Primary VAC: 120-Volt/208-Volt/240-Volt
- Secondary VAC: 2.5, 8, 12, 16 and 24
- VA: 48VA
- Dimensions: 2-1/16 in. x 3-1/4 in. x 2-3/4 in.
Bi-Directional Solid Core Heat Pump Drier, 3/8 in. ODF 5.63 in. x 2.6 in., R-410A. Flow Capacity Tons at 1 psi Delta P 5.1. Economical system protection for residential air conditioning. ODF - solid copper connections for easy installation. Solid core construction with 40 micron filtration. Maximum working pressure = 680 psi. For use with CFC, HCFC, and HFC refrigerants.
- Economical system protection for residential air conditioning
- ODF - solid copper connections for easy installation
- Solid core construction with 40 micron filtration
- Maximum working pressure = 680 psi
- For use with CFC, HCFC, and HFC refrigerants
MUELLER STREAMLINE AC Push 5/8 Coupling. Made In The Usa. 10 Year Warranty. Double O-Ring Sealing. Ideal For Repair And Remodel Projects. Robust One-Piece Forged Brass Body. Allows For Permanent Tool-Free And Flame-Free Connections. Patented Push-Fit Technology Designed For Common Air Conditioning And Heat Pump Installs And Repairs. Mfg #ACP10145
- Made In The Usa
- 10 Year Warranty
- Double O-Ring Sealing
- Ideal For Repair And Remodel Projects
Hermetically designed moisture indicator with 3% relative humidity sensitivity, intended for use on refrigerant lines. 3% relative humidity indication compared to 10% paper indicators. Accurate color calibration at low ppm levels and higher temperatures. Wide angle viewing/ high visibility window for ease of monitoring.
- All brass corrosion resistant body
- Fully hermetic design
- Maximum working pressure: 680 psi
- Tri color coded: blue/purple/pink
High Altitude Pressure Switch for 33" Furance Single Stage 95%
- Source 1
- Model S1-1PS3307
- 33"
- Single Stage
Open end yarns finished in a modern soft-flow machine for optimum whiteness. Bale packed for economy and value. 86% Virgin Cotton, 14% Polyester. 10.5 LB per dozen.
- Made from virgin cotton and polyester for softness and comfort
- Open-end yarns finished in the soft-flow machine for whiteness
- Machine washable for convenient cleaning
- White color offers an elegant look and feel
110 VAC to 125VAC Solid-state Hardstart Relay, includes relay, overload and start capacitor. Used refrigeration systems with or without run capacitors. Rated for 1/4 HP to 1/3 HP compressors. Maximum RLA 6.8 Amps.
- Prevents low voltage starting problems
- Replaces relay, overload and provides a boost for hard start and unbalanced systems
- UL recognized
- Made in China
Mueller Streamline 3/4 OD ACR P X P COUPLG. Sizes Ranging From 1/4 – 1-1/8. 10-Year Limited Warranty. Dualseal Ring Design. Force 360 Press Contour. Packaged In Economical Quantities. Clean, Clear Resealable Poly Bags. Cad/Bim Content Available. Mfg #RP10157
- 10-Year Limited Warranty
- Dualseal Ring Design
- Force 360 Press Contour
High Altitude Pressure Switch for 33" Furance Single Stage 80%
- Source 1
- Model S1-1PS3302
- 33"
- Single Stage
MUELLER STREAMLINE 1/2OD ACP X ACP COUPLING. Made In The Usa. 10 Year Warranty. Double O-Ring Sealing. Ideal For Repair And Remodel Projects. Robust One-Piece Forged Brass Body. Allows For Permanent Tool-Free And Flame-Free Connections. Patented Push-Fit Technology Designed For Common Air Conditioning And Heat Pump Installs And Repairs. Mfg #ACP10144
- Made In The Usa
- 10 Year Warranty
- Double O-Ring Sealing
- Ideal For Repair And Remodel Projects
This is a genuine GOODMAN replacement part. Equipment should be sized, selected and installed by a qualified professional to ensure proper installation, safe operation, adherence to federal, state and local codes and for valid warranty. See installation guide for more details. Professional installation recommended.
- Goodman OEM thermal expansion valve
- Tons: 1.5-Ton to 2.0-Ton
- Refrigerant R-410A
- 1.5-ton, 2.0-ton non-bleed txv kit