Searched for "40101600"
Ceramic fuse link for HX Fan Coil Units
- Yellow color code
- Opens at 300 degree F
- GSA approved
- Provides reliable back-up protection for temperature controlling thermostats.
- Applied to millions of appliances and personal care products.
- Used in office machines, portable heaters and industrial equipment as a thermal safeguard.
- 10 Amps @ 250VAC
Valve core with Teflon seal. Compatible with most refrigerants. Industry standard valve cores.
- Replaces SF1515
- Steel construction
- Use with most refrigerants
- Neoprene seal
Heavy-Duty Round Brass Cap with Neoprene Seal. Brass cap common to HVAC applications. Made of CDA 360 brass.
- Brass construction
- Industry standard cap
- Neoprene seal
- 1/4 in.
Hard start relay and start capacitor, gives additional starting torque up to 500%. For all single phase 120/288VAC units from 1/2 through 10 HP. 2 wire connection to existing run cap for easy installation. For severe Low-Voltage or hard starting compressors.
- Residential and commercial PSC A/C units and heat pumps
- Can be used on 120 thru 288 VAC units
- Room A/C units
- Installs in seconds across run capacitor terminals
SXT105 is designed for use in AC Controls Systems including air conditioning circuits, thermostats, gas valves, relays or other applications that do not exceed the listed ratings. SXT105 can be used to replace any transformer of same primary voltage and equal or lower VA ratings. This transformer uses a foot mount design.
- Foot mount
- Primary: 120-Volt / 208-Volt / 240-Volt
- Secondary: 24-Volt
- Output VA: 40 VA
Fusible link assemblies are safety devices mounted in ceramic holders. Tear drop shaped ceramic holders with a screw mounting hole at the small end and two 1/4" quick connects for convenient hook-up. Open: 300 degree F.
- Provides reliable back-up protection for temperature controlling thermostats
- Applied to millions of appliances and personal care products
- Applied in office machines, portable heaters and industrial equipment as a thermal safeguard
- Sold 5 per pack
This is a genuine part. Built with durability in mind. Transformer.
- 230-Volt to 24-Volt - for use with GOODMAN and Amana equipment
- Transformer
- Color: gray
- 240-Volt
Bi-Directional Solid Core Heat Pump Drier, 3/8 in. ODF 5.63 in. x 2.6 in., R-410A. Flow Capacity Tons at 1 psi Delta P 5.1. Economical system protection for residential air conditioning. ODF - solid copper connections for easy installation. Solid core construction with 40 micron filtration. Maximum working pressure = 680 psi. For use with CFC, HCFC, and HFC refrigerants.
- Economical system protection for residential air conditioning
- ODF - solid copper connections for easy installation
- Solid core construction with 40 micron filtration
- Maximum working pressure = 680 psi
- For use with CFC, HCFC, and HFC refrigerants
Liquid Line Solid Core Filter Drier. 3 in. ODF, 6.22 in. x 2.5 in. Flow Capacity (ARI Standard 710.86) Tons at 1 psi Delta P Refrigerant 134A=4.4, R-22=4.8, R410A=4.9, R-404A/R507=3.2. Economical system protection for residential air. conditioning ODF - solid copper connections for easy installation Solid core construction with 40 micron filtration Maximum working pressure = 680 psi For use with CFC, HCFC, and HFC refrigerants.
- Economical system protection for residential air conditioning
- ODF - solid copper connections for easy installation
- Solid core construction with 40 micron filtration
- Maximum working pressure = 680 psi
- For use with CFC, HCFC, and HFC refrigerants
Hardstart relay and start capacitor, gives additional starting torque up to 300% for all single phase 120/288 VAC units from 1/2 through 10 HP. 2 wire connection to existing run cap for easy installation. For low voltage and hard starting compressors.
- Residential and commercial PSC A/C units and heat pumps
- Can be used on 120 through 288 VAC units
- Room A/C units
- Installs in seconds across run capacitor terminals
0130F00041 GOODMAN Replacement Furnace Pressure Switch complies with warranty parts requirements for GOODMAN HVAC Equipment. GOODMAN Replacement parts are direct OEM replacements that requires no modifications for ease of replacement. Please review your GOODMAN Equipment Product Specifications to ensure that 0130F00041 replacement Furnace Pressure Switch is the applicable replacement part for your system.
- For use in GOODMAN and Amana furnaces
- Genuine OEM replacement part
- Be sure to reference furnace model and version for appropriate replacement part
- OEM part requires no modification for easy installation
This is a genuine GOODMAN replacement part. It is designed for use in HVAC applications. See installation guide for more details. Professional installation recommended.
- Built with quality in mind
- Replacement part
- 0.7 SP
- Optimum performance
Thermal cut-offs provide protection against overheating when the design limit temperature of a circuit is reached. Thermal cut-offs are temperature sensitive, one-time devices which open the circuit when operating temperatures exceed the rated temperature of the cut-off . Open: 333 degree F.
- Provides reliable back-up protection for temperature controlling thermostats
- Applied to millions of appliances and personal care products
- Applied in office machines, portable heaters and industrial equipment as a thermal safeguard
- 5 per pack
Hard start kit 3-1/2, 4, 5
- High-quality steel housing for enhanced durability
- Conveniently holds water at a capacity of up to 19 gal.
- Efficiently operates at a maximum pressure of up to 100 PSI
- Electrostatically applied polyester paint resists corrosion
Liquid Line Solid Core Filter Drier, 3/8 in. ODF, 5.43 ft. x 2.5 in. Flow Capacity (ARI STD 710.86) Tons at 1 psi Delta P Refrigerant 134a=3.8, R-22=4.1, R410=4.2, R-404a/R507=2.7. Economical system protection for residential air conditioning. ODF - solid copper connections for easy installation. Solid core construction with 40 micron filtration. Maximum working pressure = 680 psi. For use with CFC, HCFC, and HFC refrigerants.
- Economical system protection for residential air conditioning
- ODF - solid copper connections for easy installation
- Solid core construction with 40 micron filtration
- Maximum working pressure = 680 psi
- For use with CFC, HCFC, and HFC refrigerants
This replaces manufacturers numbers: JMPO-102-4C, 03336A-000. It is a replacement sail switch. It is black in color.
- Replaces industry numbers: 251010, 53-5152, PRS486754, DRS32346A
- Designed for magic-pack, magic-chef, and comfort pack
- 5A at 125VAC, 3A at 250-VAC
- UL Listed
The 5-2-1 compressor saver protects vital air conditioner components by significantly reducing the amount of time it takes for your compressor to start, in some cases up to 50%. This means that your air conditioner and compressor will bear half the stress, strain, and heat each and every time it starts. This compressor might save thousands of dollars by not having to replace the air conditioner.
- 3 wire hard start kit is pre-wired potential relay and start capacitor
- Reduces time compressor is on high amp start up, which helps prevent the dimming effect of household lighting
- Three color coded wires to connect for ease of installation Instant re-start
- For use on reciprocating and scroll compressors
Liquid Line Solid Core Filter Drier. 3/8 in. ODF, 4.53 in. X 2.5 in. Flow Capacity (ARI Standard 710.86) Tone at 1 psi Delta P Refrigerant 134a=4.1, R-22=4.4, R410A=4.5, R-404A/R507=2.9. Economical system protection for residential air conditioning. ODF - solid copper connections for easy installation. Solid core construction with 40 micron filtration. Maximum working pressure = 680 psi. For use with CFC, HCFC, and HFC refrigerants.
- Economical system protection for residential air conditioning
- ODF - solid copper connections for easy installation
- Solid core construction with 40 micron filtration
- Maximum working pressure = 680 psi
- For use with CFC, HCFC, and HFC refrigerants
A versatile transformer that can be used for many different applications. Accepts input voltages of 120 VAC, 208 VAC and 240 VAC and provides a choice of secondary voltages of 2.5 VAC, 8 VAC, 12 VAC, 16 VAC and 24 VAC. Enclosed frame - plate, foot or knock-out mount.
- Primary VAC: 120-Volt/208-Volt/240-Volt
- Secondary VAC: 2.5, 8, 12, 16 and 24
- VA: 48VA
- Dimensions: 2-1/16 in. x 3-1/4 in. x 2-3/4 in.
Electric heat COIL KIT. Designed for 5000-Watt at 240-Volt or 3750-Watt at 208-Volt. Comes with installation hardware.
- Welded terminal bolts for low resistance and longer life
- Nichrome heavy gauge construction
- Complete kits contain close wound coil to fit many applications
- 2-male and 2-female bushings, terminal screws, nuts and washers to make a proper repair
Copeland R-410A Scroll Compressor Model ZP25LXE-PFV-800. Aftermarket Replacement Compressor. Drop In Replacement For Zp Models. 25,095 Btu. R-410a. Single Phase. 208/230 V. Run Cap 35/440. Stub Connections. Square Mount Base. Molded Plug. Mfg #ZP25LXE-PFV-800
- Aftermarket Replacement Compressor
- Drop In Replacement For Zp Models
- 25,095 Btu
- R-410a
1.0 - 3.0 ton maximum torque Hard Start Device for single phase 208-Volt, 230-Volt and 265-Volt A/C, refrigeration and heat pump compressors. Hard start devices extend the life of compressors considerably by bringing them up to full speed more quickly and efficiently. They also assist compressors in starting under very adverse ambient conditions such as low voltage or high head pressures.
- 2-wired starting device that uses a mechanical potential relay and start capacitor
- 1-3 ton unit
- Assists compressor startup under adverse conditions
- Reduce stress on compressor during start up
- Extend the life of compressors
- OEM tested and approved
- Recommended for: single phase 208 V, 230 V, and 265 V A/C, refrigeration and heat pump compressors
- Handles 1.0 ‒ 3.0 ton
- Product Code: 96503
Finally, a product that simplifies the repair of burned or damaged spade terminals when reconnecting or replacing a compressor. Founded in 1971, Diversitech Corporation is North Americas largest manufacturer of equipment pads and a leading manufacturer and supplier of components and related products for multiple industries, including: HVACR, electrical, consumer hardware retail, electrical utility, automotive retail and pool and spa channel. Diversitechs mission for its wholesaler partners is to simplify their work. We do this by offering more than 200 product categories all from a single manufacturing/supplier source to create product availability and supply chain cost advantages for our customers in every market we serve. We also leverage best-in-class customer service to react quickly and professionally to every customer request.
- Fits both non-burned and burned terminals
- Connects to the compressor via precision brass cylinders that fit over the terminals and connect with stainless steel set screws
- Easy to install and guaranteed for the life of the compressor
- Wires are permanently attached
- Standard factory 600V, 65 strand machine wire
Hard starts relay and start capacitor combination, gives maximum torque possible for all single phase units from 1/12 through 10 HP. The simple 2 wire connection is Voltage sensing and has instant restart capability. A backup electronic timing circuit protects the compressor.
- Electronic potential relay (EPR) technology and 330 VAC start capacitor
- UL recognized file E146162
- Can be used on PSC and CSIR type compressors
- Voltage sensing 90V-277V
Hard Start Kit Positive Temperature Coefficient (PTC) Relay and Start Capacitor SPP Series. PTC Positive Temperature Coefficient Relay and Capacitor. NATE Recognized (Course #1867-0002). Can be used on PSC type compressors.
- Easy 2-wire installation
- Increase in torque 600%
- Most economic
- UL recognized
ACS-4 In-line switch is designed to detect condensate drain line clogs or blockages and shut off equipment or alert users to the potential overflow condition. ACS-4 installs on 3/4 in. PVC condensate drain pipe in either a horizontal or vertical position. Using the included 3/4 in. drain pan fitting, ACS-4 can also be installed directly at the drain pan primary or auxiliary outlet to detect pan overflow.
- Installs horizontally or vertically for confined spaces
- Reliable mechanical switch and polymer float
- Shuts off equipment when clog or blockage backs up condensate water in the drain line
- Can be simultaneously be connected to a warning light, audible alarm circuit or BMS/BAS system in addition to connection for equipment shut down
Copeland R-410A Scroll Compressor. Aftermarket Replacement Compressor. Drop In Replacement For Zp Models. 41,480 Btu. R-410a. Single Phase. 208/230 V. Run Cap 45/440. Stub Connections. Square Mount Base. Molded Plug. Mfg #ZP42LXE-PFV-800
- Aftermarket Replacement Compressor
- Drop In Replacement For Zp Models
- 41,480 Btu
- R-410a
Universal Shield Locking cap 4 pack. All brass design, no corrosion. Comes with two warning stickers and one bit. Waterproof black universal sleeves.
- Universal locking cap 1/4 in.
- Secure, tamper resistant locking cap
- Waterproof color-coded caps
- All brass, corrosion-resistant design
- Deters refrigerant theft and huffing, provides greater security than any other cap on the market
Copeland R-22/R-407C Reciprocating Compressor Model CR28K6E-PFV-925. Aftermarket Replacement Compressor. Drop In Replacement For Cr Models. 28,000 Btu. 200/230 V. Single Phase. R22 / 407c. Stub Connections. Square Mount Base. Updated Power Supply. Mfg #CR28K6E-PFV-925
- Aftermarket Replacement Compressor
- Drop In Replacement For Cr Models
- 28,000 Btu
- 200/230 V
Copeland R-22/R-407C Reciprocating Compressor Model CR24K6E-PFV-925. Aftermarket Replacement Compressor. Drop In Replacement For Cr Models. 16,000 Btu. 200/230 V. Single Phase. R22 / 407c. Stub Connections. Square Mount Base. Updated Power Supply. Mfg #CR16K6E-PFV-925
- Aftermarket Replacement Compressor
- Drop In Replacement For Cr Models
- 16,000 Btu
- 200/230 V
Precision machined from high grade brass and covered by shielding aluminum shroud, and special tools are needed to apply/remove Novent caps. All caps are embossed and color-coded. Proper installation helps stop accidental refrigerant mixing in A/C systems.
- Resists crushing and removal without key
- Corrosion resistant anodized aluminum
- Integral neoprene O-ring resists oils and sealants
- Torque limiter prevents overtightening
MUELLER STREAMLINE 3/8 OD 163HP FLTR DRY FTG X FTG. Sizes Ranging From 1/4†– 1-1/8â€. 10-Year Limited Warranty. Dualseal Ring Design. Force 360 Press Contour. Packaged In Economical Quantities. Clean, Clear Resealable Poly Bags. Cad/Bim Content Available. Mfg #RP17391
- Sizes Ranging From 1/4†– 1-1/8â€
- 10-Year Limited Warranty
- Dualseal Ring Design
- Force 360 Press Contour
Copeland R-410A Scroll Compressor Model ZP21LXE-PFV-800. Aftermarket Replacement Compressor. Drop In Replacement For Zp Models. 30,799 Btu. R-410a. Single Phase. 208/230 V. Run Cap 40/440. Stub Connections. Square Mount Base. Molded Plug. Mfg #ZP31LXE-PFV-800
- Aftermarket Replacement Compressor
- Drop In Replacement For Zp Models
- 30,799 Btu
- R-410a
Open end yarns finished in a modern soft-flow machine for optimum whiteness. Bale packed for economy and value. 86% Virgin Cotton 14% Polyester. 3 LB per dozen
- Made from virgin cotton and polyester for softness and comfort
- Open-end yarns finished in the soft-flow machine for whiteness
- Machine washable for convenient cleaning
- White color offers an elegant look and feel
MUELLER STREAMLINE 7/8 OD ACR PXP LR 90 ELL. Sizes Ranging From 1/4 – 1-1/8. 10-Year Limited Warranty. Dualseal Ring Design. Force 360 Press Contour. Packaged In Economical Quantities. Clean, Clear Resealable Poly Bags. Cad/Bim Content Available. Mfg #RP02734
- 10-Year Limited Warranty
- Dualseal Ring Design
- Force 360 Press Contour
MUELLER STREAMLINE 1-1/8 OD ACR PXP LR 45EL. Sizes Ranging From 1/4 – 1-1/8. 10-Year Limited Warranty. Dualseal Ring Design. Force 360 Press Contour. Packaged In Economical Quantities. Clean, Clear Resealable Poly Bags. Cad/Bim Content Available. Mfg #RP03044
- 10-Year Limited Warranty
- Dualseal Ring Design
- Force 360 Press Contour
High Altitude Pressure Switch for 33" Furnace Single Stage 80%
- Source 1
- Model S1-1PS3301
- 33"
- Single Stage
OEM Reversing Valves & Coil. Size: 3.0 - 5.0 Ton (13 Seer).
- Genuine OEM replacement part
- For use with GOODMAN and Amana equipment
- OEM part requires no modification for easy installation
- Be sure to reference furnace model and version for appropriate replacement part
Hotpoint 30" Free-Standing Standard Clean Gas Range RGBS400DMWW Standard Clean Oven- Smooth Surface And Rounded Corners Make Clean-Up Quick And Easy 4.8 cu. ft. oven capacity is enough room to cook an entire meal at once Sealed cooktop burners contains spills and make cleaning quick and easy Heavy steel grates- High-grade steel grates offer dependable, long-lasting performance Porcelain upswept cooktop- Raised edges contain spills, while the surface is easy to wipe clean Two oven racks- Feature a durable construction to help accommodate any size or type of cookware One-piece durable handle is strong and long-lasting Large window to easily look inside to monitor food as it's cooking Broiler drawer to achieve perfectly browned results Visor handle- Features a classic design and easy cleanability Mfg #RGBS400DMWW
- Standard Clean Oven- Smooth Surface And Rounded Corners Make Clean-Up Quick And Easy
- 4.8 cu. ft. oven capacity is enough room to cook an entire meal at once
- 4.8 cu. ft. oven capacity is enough room to cook an entire meal at once
- Sealed cooktop burners contains spills and make cleaning quick and easy
MUELLER STREAMLINE 7/8 OD ACR FTG X P 90 EL. Sizes Ranging From 1/4 – 1-1/8. 10-Year Limited Warranty. Dualseal Ring Design. Force 360 Press Contour. Packaged In Economical Quantities. Clean, Clear Resealable Poly Bags. Cad/Bim Content Available. Mfg #RP02834
- 10-Year Limited Warranty
- Dualseal Ring Design
- Force 360 Press Contour
MUELLER STREAMLINE 7/8OD ACP X ACP 90 ELBOW. Made In The Usa. 10 Year Warranty. Double O-Ring Sealing. Ideal For Repair And Remodel Projects. Robust One-Piece Forged Brass Body. Allows For Permanent Tool-Free And Flame-Free Connections. Patented Push-Fit Technology Designed For Common Air Conditioning And Heat Pump Installs And Repairs. Mfg #ACP02734
- Made In The Usa
- 10 Year Warranty
- Double O-Ring Sealing
- Ideal For Repair And Remodel Projects
MUELLER STREAMLINE 3/8 OD ACR P X P COUPLG. Sizes Ranging From 1/4 – 1-1/8. 10-Year Limited Warranty. Dualseal Ring Design. Force 360 Press Contour. Packaged In Economical Quantities. Clean, Clear Resealable Poly Bags. Cad/Bim Content Available. Mfg #RP10143
- 10-Year Limited Warranty
- Dualseal Ring Design
- Force 360 Press Contour
These fittings are designed to meet most all residential, industrial and irrigation/agricultural needs. Smooth inner walls allow for low pressure drops and resistance to chemicals and corrosion. Founded in 1971, Diversitech Corporation is North Americas largest manufacturer of equipment pads and a leading manufacturer and supplier of components and related products for multiple industries, including: HVACR, electrical, consumer hardware retail, electrical utility, automotive retail and pool and spa channel. Diversitechs mission for its wholesaler partners is to simplify their work. We do this by offering more than 200 product categories all from a single manufacturing/supplier source to create product availability and supply chain cost advantages for our customers in every market we serve. We also leverage best-in-class customer service to react quickly and professionally to every customer request.
- These fittings are designed to meet most all residential, industrial and irrigation/agricultural needs
- Smooth inner walls allow for low pressure drops and resistance to chemicals and corrosion
- Highly versatile, lightweight and easy to install
- White
- Traps (slip x slip)
Goodman OEM Service Valves. Type: Suction. Size: 3/4".
White-Rodgers suction line drier system protector. Remove and filters refrigerant with 40 micron filtration. 5/8 in. ODF. For use with CFC, HCFC and HFC refrigerants.
- Solid block desiccant core effectively removes and holds a maximum amount of contaminants with minimal pressure drop
- Provides high moisture, organic and inorganic acid removal, binding material within the core protects the core from acid decomposition and allows the core to collect and hold the acids from a motor burnout
- For use with CFC, HCFC and HFC refrigerants
- Maximum working pressure of 680 psi
- Solid core construction with 40 mic filtration
- 6/8 in. ODF solid copper connections for easy installation
Connection is 1/4 in. flare. White-Rodgers liquid line pre-filter. Traps solid contaminants such as aluminum, iron and iron oxides, copper, metal chips, varnish, flux and dirt particles down to 30 microns. 1/4 in. flare SAE connections.
- Pre-filter offers protection to refrigerant service equipment, when installed on the inlet of the service equipment, the refrigerant is filtered before entering
- Pre-filter is for temporary use only and changed after a maximum of 200 lbs. of refrigerant has flowed through the filter
- Traps solid contaminants, filtering media to remove aluminum and iron particles, copper and iron oxides, metal chips, varnish, flux, and dirt particles down to 30 microns
- 1/4 in. flare SAE connection