Engineered for reliability, The Taco Heat Motor Power Head provides a time proven method for operation of hydronic zone valves. The exclusive heat motor design operates silently, while the twist off head allows for serviceability without disturbing system connections. This power head is 24 VAC powered with an isolated end switch.

• Isolated end switch
• 24 VAC powered
• For Taco series 570 zone valves (570, 571, 572, and 573)
• Allows for service of valve without removing it

Danfoss -- Wall Mount Operator with Combined Remote Mounted Sensor, Dial and Capillary Tube For Ra2000 Units. Cap Size: 16".

The Honeywell Home Aquastat Relay is designed for use with an HVAC heating system. This immersion-type controller provides high limit protection while switching control of the oil burner and the circulator. Compatible with Honeywell Home models.

• Designed for use with an HVAC heating system
• 120 240 degree F range with 8 degree F fixed differential, low volt/millivolt
• Select models include transformer and accessory terminals for adding a remote low limit controller
• Requires a 24 VAC thermostat with heat anticipator set at 0.2A

The DELAVAN 0.50 70B1 Oil Nozzle has a stainless-steel, hollow orifice and features a brass body. Type B-nozzles produce a spray that distributes droplets uniformly throughout the complete pattern. The spray pattern becomes progressively hollower at higher flow rates, particularly above 8.00 GPH. Provides smooth ignition and efficient combustion, particularly in larger burners. This boiler replacement part is compatible with an oil-burning appliance.

• Precise spray angles and optional spray uniformity through new machining process
• Reduced distributor size with shorter tangential slots to avoid plugging
• Aerodynamic body configuration
• Rolled threads to avoid metal chips and burrs
• Sintered filter for maximum protection
• Boiler replacement part is compatible with an oil-burning appliance
• ISO 9001 certified

The DELAVAN 0.90 70A Oil Nozzle has a stainless-steel, hollow orifice and features a brass body. Type A-nozzles are mainly used on burners with a hollow cone air pattern and for through puts up to 2.00 GPH. The droplet distribution is concentrated on the outside of the cone and results in good ignition and low-noise combustion. This boiler replacement part is compatible with an oil-burning appliance.

• Precise spray angles and optional spray uniformity through new machining process
• Reduced distributor size with shorter tangential slots to avoid plugging
• Aerodynamic body configuration
• Rolled threads to avoid metal chips and burrs
• Sintered filter for maximum protection
• Boiler replacement part is compatible with an oil-burning appliance
• ISO 9001 certified

The DELAVAN 0.85 70B Oil Nozzle has a stainless-steel, hollow orifice and features a brass body. Type B-nozzles produce a spray that distributes droplets uniformly throughout the complete pattern. The spray pattern becomes progressively hollower at higher flow rates, particularly above 8.00 GPH. Provides smooth ignition and efficient combustion, particularly in larger burners. This boiler replacement part is compatible with an oil-burning appliance.

• Precise spray angles and optional spray uniformity through new machining process
• Reduced distributor size with shorter tangential slots to avoid plugging
• Aerodynamic body configuration
• Rolled threads to avoid metal chips and burrs
• Sintered filter for maximum protection
• Boiler replacement part is compatible with an oil-burning appliance
• ISO 9001 certified

The 005-050RP Cartridge Assembly is used on several models of Taco circulators. This kit takes the place of conventional seal kits and is extremely easy to install. The Cartridge comes with all the hardware needed to extend your Taco Circulator's operating life.

• Repair part
• Includes casing body bolts
• Easy to install
• 3-year warranty

The DELAVAN 1.00 70B Oil Nozzle has a stainless-steel, hollow orifice and features a brass body. Type B-nozzles produce a spray that distributes droplets uniformly throughout the complete pattern. The spray pattern becomes progressively hollower at higher flow rates, particularly above 8.00 GPH. Provides smooth ignition and efficient combustion, particularly in larger burners. This boiler replacement part is compatible with an oil-burning appliance.

• Precise spray angles and optional spray uniformity through new machining process
• Reduced distributor size with shorter tangential slots to avoid plugging
• Aerodynamic body configuration
• Rolled threads to avoid metal chips and burrs
• Sintered filter for maximum protection
• Boiler replacement part is compatible with an oil-burning appliance
• ISO 9001 certified

The Delavan .85 60B Oil Nozzle has a stainless-steel, hollow orifice and features a brass body. Type B-nozzles produce a spray that distributes droplets fairly uniformly throughout the complete pattern. The spray pattern becomes progressively hollower at higher flow rates, particularly above 8.00 GPH. Provides smooth ignition and efficient combustion, particularly in larger burners. This boiler replacement part is compatible with an oil-burning appliance.

• Orifice oil nozzle
• Made of brass
• Stainless-steel solid cone
• Use with oil-burning appliances

The DELAVAN 0.85 60A Oil Nozzle has a stainless-steel, hollow orifice and features a brass body. Type A-nozzles are mainly used on burners with a hollow cone air pattern and for through puts up to 2.00 GPH. The droplet distribution is concentrated on the outside of the cone and results in good ignition and low-noise combustion. This boiler replacement part is compatible with an oil-burning appliance.

• Precise spray angles and optional spray uniformity through new machining process
• Reduced distributor size with shorter tangential slots to avoid plugging
• Aerodynamic body configuration
• Rolled threads to avoid metal chips and burrs
• Sintered filter for maximum protection
• Boiler replacement part is compatible with an oil-burning appliance
• ISO 9001 certified

The DELAVAN 1.00 60B1 Oil Nozzle has a stainless-steel, hollow orifice and features a brass body. Type B-nozzles produce a spray that distributes droplets uniformly throughout the complete pattern. The spray pattern becomes progressively hollower at higher flow rates, particularly above 8.00 GPH. Provides smooth ignition and efficient combustion, particularly in larger burners. This boiler replacement part is compatible with an oil-burning appliance.

• Precise spray angles and optional spray uniformity through new machining process
• Reduced distributor size with shorter tangential slots to avoid plugging
• Aerodynamic body configuration
• Rolled threads to avoid metal chips and burrs
• Sintered filter for maximum protection
• Boiler replacement part is compatible with an oil-burning appliance
• ISO 9001 certified

The DELAVAN 1.00 70A Oil Nozzle has a stainless-steel, hollow orifice and features a brass body. Type A-nozzles are mainly used on burners with a hollow cone air pattern and for through puts up to 2.00 GPH. The droplet distribution is concentrated on the outside of the cone and results in good ignition and low-noise combustion. This boiler replacement part is compatible with an oil-burning appliance.

• Precise spray angles and optional spray uniformity through new machining process
• Reduced distributor size with shorter tangential slots to avoid plugging
• Aerodynamic body configuration
• Rolled threads to avoid metal chips and burrs
• Sintered filter for maximum protection
• Boiler replacement part is compatible with an oil-burning appliance
• ISO 9001 certified

This 1/2 in. lead free anti-siphon hot or cold water vacuum breaker prevents the reverse flow of polluted water from entering into the potable water supply due to back siphonage. It consists of polished chrome plated lead free construction, chemical resistant silicone seat disc, chrome hood, and an atmospheric vent to prevent spilling. It has a full size orifice to assure pipe size capacity and maximum flow. It is ideal for low flow, non-continuous hot or cold water health hazard installations such as on laboratory equipment.

• Lead free construction
• Chrome finish
• Female NPT inlet and outlet
• Hot or cold water
• Designed to prevent the backflow of polluted water from entering into the potable water supply
• Ideal for low flow, non-continuous hot or cold water health hazard installations such as on laboratory equipment
• Maximum pressure is 125 psi

All the features you trust from the original Isolator Uni-Flange ball valve, plus a 360 degree rotating flange that allows for orientation to any degree necessary for your installation. This forged brass full port ball valve features a blow-out proof stem, adjustable packing glands and a stainless steel snap ring for extra stability during installation. The only way to isolate circulator pumps.

• Conical inlet to minimize turbulence
• Replaces 3-components, eliminates 2-leak paths, saves approximately 20 minutes in labor
• Fits virtually any standard circulator pump
• Available with slotted holes for high velocity pumps
• Prevents electrolysis
• Eliminates galvanic corrosion

I Series Combi Primary Secondary Heating Kit

• I Series Combi
• Heating Kit
• Primary Secondary
• 807000212

Provide precise and accurate control of room temperature. Control temperature by modulating the flow of hot water or steam through free-standing radiators, convectors and other heating units with high capacity requirements. Continually monitor and adjust room temperature for consistent comfort.

• Designed with the higher capacity normally required by North American heating systems
• Valve seat disc, which is made of resilient material (EPDM)
• Nickel-plated bronze casted body with working parts in cartridge insert for ease of service
• All working parts are replaceable while valve remains in service, in-line, under pressure
• Valves normally open without control mounted
• Valves may be used with V110 valves
• Ensures tight shutoff on steam or hot water systems
• Meet ASHRAE standard 102-1989
• Includes sensor, set point dial and valve actuator
• Components may be integral or connected by capillary tubes

ThIS Boiler Rest Control is designed to improve performance in your hot water heating systems by regulating the supply water temperature of a single boiler based on the outdoor temperature. It utilizes a heating curve to set the relationship between outdoor temperature and supply water temperature to provide optimum control and comfort. Thanks to its integral microprocessor, the PC700 Boiler Reset Control is able to continuously adjust the boiler differential to avoid boiler short-cycling and large temperature swings, Standard functions include warm weather shut down, minimum boiler supply temperature setting, and a starting water temperature setting.

• Regulates water supply temperature of a boiler
• Helps avoid short cycling of the boiler
• Liquid crystal display for temperature
• Warm weather shut down feature

The DELAVAN 1.10 70B Oil Nozzle has a stainless-steel, hollow orifice and features a brass body. Type B-nozzles produce a spray that distributes droplets uniformly throughout the complete pattern. The spray pattern becomes progressively hollower at higher flow rates, particularly above 8.00 GPH. Provides smooth ignition and efficient combustion, particularly in larger burners. This boiler replacement part is compatible with an oil-burning appliance.

• Precise spray angles and optional spray uniformity through new machining process
• Reduced distributor size with shorter tangential slots to avoid plugging
• Aerodynamic body configuration
• Rolled threads to avoid metal chips and burrs
• Sintered filter for maximum protection
• Boiler replacement part is compatible with an oil-burning appliance
• ISO 9001 certified

The DELAVAN 1.25 70A Oil Nozzle has a stainless-steel, hollow orifice and features a brass body. Type A-nozzles are mainly used on burners with a hollow cone air pattern and for through puts up to 2.00 GPH. The droplet distribution is concentrated on the outside of the cone and results in good ignition and low-noise combustion. This boiler replacement part is compatible with an oil-burning appliance.

• Precise spray angles and optional spray uniformity through new machining process
• Reduced distributor size with shorter tangential slots to avoid plugging
• Aerodynamic body configuration
• Rolled threads to avoid metal chips and burrs
• Sintered filter for maximum protection
• Boiler replacement part is compatible with an oil-burning appliance
• ISO 9001 certified

Aquastat Controllers are immersion type devices for limiting or regulating the temperature of liquids in boilers, storage tanks and other applications where temperature control is required. Direct or well immersion Tradeline models include heat-conductive compound. Circulator Control and High Limit or Low Limit.

• Totally enclosed micro switch snap-acting switches operate on temperature rise to set point
• Visible control point scale and external adjustment screw permit easy setting
• Horizontal or vertical insertion of the sensing element
• Remote bulb model may be used to sense air temperature in ducts and in outside air sensing applications
• Direct or well immersion Tradeline models include heat-conductive compound
• Temperature range maximum ambient-150 degree F
• Operating temperature range (F)65 degree F to 200 degree F
• Differential temperature (F) 5 degree F to 30 degree F adjusted
• SPDT switching action
• Stop factory-set at 200 degree F (93 degree C)

lead free bronze flanges. makes installation and service easy. provides a strong and water tight connection between pipe and circulator.

• For use with Astro 220 and 225 SSU models
• 1-1/4 in. NPSM x 3/4 in. sweat
• Lead free
• Set contains 2 half unions and gaskets
• Easy to install
• For use with copper pipe
• Water tight connection
• High quality
• Genuine factory replacement
• Complies with California & Vermont lead free laws

3 Year Warranty

• System Lubricated
• Bronze Body Construction For Potable Water
• 115-volt motor ensures reliable performance
• Pump with 5.2 maximum PSI and 37 maximum GPM
• High-quality bronze body enables long-term use
• Suitable for potable water

The DELAVAN 0.50 70A Oil Nozzle has a stainless-steel, hollow orifice and features a brass body. Type A-nozzles are mainly used on burners with a hollow cone air pattern and for through puts up to 2.00 GPH. The droplet distribution is concentrated on the outside of the cone and results in good ignition and low-noise combustion. This boiler replacement part is compatible with an oil-burning appliance.

• Precise spray angles and optional spray uniformity through new machining process
• Reduced distributor size with shorter tangential slots to avoid plugging
• Aerodynamic body configuration
• Rolled threads to avoid metal chips and burrs
• Sintered filter for maximum protection
• Boiler replacement part is compatible with an oil-burning appliance
• ISO 9001 certified

Exact Replacement Plastic Impeller for Broan 9910379H. Light-weight design reduces bearing wear and vibration. Celcon plastic construction.

• Broan exact replacement impellers
• Blade: 4-9/16 in. O.D.
• Hole: 0.218 in. I.D.
• Made in China