The Robertshaw 1980 Series Snap-Fit Thermocouples offer easy installation into the majority of pilot burners. They are manufactured without complicated adaptors, but with extra insulation that the brass sheath provides under high ambient temperatures. Various lengths are available.

• Easy burner installation with attached threaded nut
• Stainless steel outer jacket for long life and resistance to heat blistering
• Combination of copper and nickel alloys for good electrical conductivity
• Mica washer to insulate from shorting conditions
• Tinnerman clip included
• Various lengths available for multiple applications

The latest generation in vibration dampening technology and the most effective vibration dampening pad available on the market. The EVA Pad was tested against other pads at four different vibration settings and in the most severe vibration extremes, the EVA Pad outperforms cork and rubber by a margin of greater than 3:1. Founded in 1971, Diversitech Corporation is North Americas largest manufacturer of equipment pads and a leading manufacturer and supplier of components and related products for multiple industries, including: HVACR, electrical, consumer hardware retail, electrical utility, automotive retail and pool and spa channel. Diversitechs mission for its wholesaler partners is to simplify their work. We do this by offering more than 200 product categories all from a single manufacturing/supplier source to create product availability and supply chain cost advantages for our customers in every market we serve. We also leverage best-in-class customer service to react quickly and professionally to every customer request.

• Superior performance is due to the special composite foam center which is much more structurally sound than cork
• It is not affected by oils or chemicals that can break down cork and is much more effective at vibration dampening than solid rubber
• Most effective vibration dampening pad available on the market
• EVA pad outperforms cork and rubber by a margin of greater than 3:1
• Designed to withstand 50 psi

Overview The T Series programmable thermostat streamlines everything from product selection and installation to customer service and support. With a standard footprint and simple interface, the T Series will enhance the entire thermostat experience for you and your customers alike.

• TH4210U2002 2H/1C heat pump and 1H/1C conventional
• TH4110U2005 1H/1C heat pump and 1H/1C conventional
• 7-day, 5-2, 5-1-1 or non-programmable
• Uses the UWP mounting system that's standard across all T Series thermostats
• Easy upsell to a connected Lyric T6 Pro Wi-Fi when your customer is ready for Wi-Fi (C-wire required)
• Simple push-button functionality
• Filter change reminders
• 5-year warranty

The latest generation in vibration dampening technology and the most effective vibration dampening pad available on the market. The EVA Pad was tested against other pads at four different vibration settings and in the most severe vibration extremes, the EVA Pad outperforms cork and rubber by a margin of greater than 3:1. Founded in 1971, Diversitech Corporation is North Americas largest manufacturer of equipment pads and a leading manufacturer and supplier of components and related products for multiple industries, including: HVACR, electrical, consumer hardware retail, electrical utility, automotive retail and pool and spa channel. Diversitechs mission for its wholesaler partners is to simplify their work. We do this by offering more than 200 product categories all from a single manufacturing/supplier source to create product availability and supply chain cost advantages for our customers in every market we serve. We also leverage best-in-class customer service to react quickly and professionally to every customer request.

• Superior performance is due to the special composite foam center which is much more structurally sound than cork
• It is not affected by oils or chemicals that can break down cork and is much more effective at vibration dampening than solid rubber
• Most effective vibration dampening pad available on the market
• EVA pad outperforms cork and rubber by a margin of greater than 3:1
• Designed to withstand 50 psi

Master Flow 26-Gauge 90 Adjustable 4 in. Elbow is used to make turns in runs of round pipe and flexible duct through 90. It has a sturdy galvanized steel construction and is simple to adjust. It is also crimped on 1 end to easily fit into a pipe or other fitting of the same diameter. Ships in 90 position.

• Used to make angular or gradual turns in runs of pipe
• Adjustable to any angle through 90
• 26-Gauge, galvanized steel construction
• Always seal seams with building code approved sealant or duct tape (not included)
• Always insulate ductwork for greater system efficiency and comfort (not included)

Master Flow Drive Cleats and S Cleats are used to join sections of rectangular duct and stack duct in. HVAC systems. These cleats are sleeves of galvanize steel that help to securely assemble the top and bottom (S) and left and right sides (Drive) of rectangular duct runs. S cleats are used to connect the long side of the duct, while Drive cleats are used to connect the short side.

• Always seal seams with code approved mastic or sealant (or duct tape)
• Always insulate ductwork for greater system efficiency and comfort
• S cleats secure bare edges of rectangular duct
• Insulate ductwork to promote system efficiency

This genuine Aprilaire replacement water panel humidifier filter features a porous ceramic-type coating that absorbs water and maintains the proper level of hydration to support the evaporation process. Water is vaporized as air warmed by the furnace passes over the water panel humidifier filter carrying humidified air throughout the house through the air ducts. Aprilaire has been there since the beginning by introducing the first whole-home humidifier in 1954. Since then, we've continued to focus on quality design, engineering and manufacturing to deliver Healthy Humidity to every home. Healthy Humidity reduces the incidence and risk of respiratory infections from airborne viruses. It also helps remedy your dry skin, chronic sore throat, frequent nosebleeds and static shock. Additionally, proper humidity levels protect your home's wood furnishings from cracking or splitting while lowering your energy bill. Keep your Aprilaire Humidifier running at peak performance by replacing your water panel. Maintaining proper humidity levels is integral to maintaining Healthy Air.

• Designed to evaporate water and maintain proper humidity throughout the home
• Convenient 1-pack offers 1-year supply
• Lasts up to 1-year for optimal performance
• Proper humidity in your home has been shown to reduce the incidence of respiratory infections and symptoms related to allergies and asthma by minimizing the formation of bacteria, viruses, fungi and dust mites
• Whole-house humidifier models 350, 360, 560, 560A, 568, 600, 600A, 600M, 700, 700A, 700M, 760, 760A and 768

Dundas Jafine's 4 in. aluminum tension clamps are ideal for use with flexible or semi-rigid ducts. These clamps open and close with pressure. No tool required.

• Ideal for use with flexible or semi-rigid ducts
• Aluminum construction
• No tools necessary
• Easy operation

Our 102M series is a 2 way air register used for wall or ceiling openings. The stamped face allows for two way air deflection. Our Smooth glide technology ensures rattle free and quiet airflow from your central air system. Smooth glide also provides for smooth opening and closing of your back dampers. Our high quality product will ensure years of continuous use. This product features: high quality steel, white powder coat finish, smooth glide multi-shutter damper, countersunk screw holes, louvers control the amount and direction of airflow.

• Wall or ceiling register controls airflow into a room
• Made of high quality steel
• White powder coat finish
• Louvers control the amount and direction of airflow

Heavy Gauge 4 in. Pipe is used to vent boilers, furnaces and hot water heaters. Available in a variety of common lengths, diameters and gauges to help make your next HVAC project a success. A simple snap lock design and sturdy galvanized steel construction combine for a quick and secure installation that you can rely on.

• Easy-to-install snap lock design
• Crimped end with a stop-bead for a secure interlocking fit
• Sturdy 26-Gauge, galvanized steel construction
• Always seal seams with building code approved sealant or duct tape
• Always insulate ductwork for greater system efficiency and comfort

This Dryer Vent Duct is ideal for both gas and electric dryer applications. This duct is UL2158A listed and marked for safe dryer venting. It is constructed of heavy duty, fire resistant, aluminum foil laminate.

• Duct will not support combustion
• Constructed with a high density, corrosion resistant, wire helix
• Duct is air tight
• Note: per UL2158A only ducts 8 ft. or less can bear the UL label
• Note: per UL2158A only ducts 8 or less can be UL marked

This product features a 3 louver damper system that helps to prevent cold air, snow or rain from entering the home. The louvers have been redesigned to help prevent them from sticking. This cap also features a UV resistant coating that prevents the sun from discoloring it.

• Plastic construction
• A recessed caulk line helps to assist in a clean caulking application
• Caps are paintable to match the exterior of your home
• Non-stick louvers
• Ideal for bathroom fan venting, dryer venting and kitchen range hood venting

When you need a motor run capacitor that delivers the extended life your customers demand and the value you desire, you know it is time to go PRO. Titan PRO Professional Grade Motor Run Capacitors get the job done by outperforming standard motor run capacitors of similar value by 83%. Built to the toughest international compliance standards for AC motor run capacitors.

• 60,000 hours operational life
• Built to the toughest international standards for AC motor run capacitors including EIA-456-A and IEC
• 100% electrical testing
• Heavy-edged metalized polypropylene film is used for the dielectric

Our 102M series is a 2 way air register used for wall or ceiling openings. The stamped face allows for two way air deflection. Our Smooth glide technology ensures rattle free and quiet airflow from your central air system. Smooth glide also provides for smooth opening and closing of your back dampers. Our high quality product will ensure years of continuous use. This product features: high quality steel, white powder coat finish, smooth glide multi-shutter damper, countersunk screw holes, louvers control the amount and direction of airflow.

• Wall or ceiling register controls airflow into a room
• Made of high quality steel
• White powder coat finish
• Louvers control the amount and direction of airflow

Improve your home's air quality with this standard-grade furnace filter (12-Pack). Designed with a filtering medium that is continuous filament spun glass, it keeps furnaces and air conditioners clean and running efficiently. It is effective against dust, debris and lint. The frame is made with one continuous piece of chipboard to guard against corner separation. Optimize this filter by changing it monthly during high-use periods; one case will last you a year.

• Lasts up to 30 days
• Change filters monthly for peak energy efficiency
• Low airflow resistance
• UL class II
• Self-retaining media adheres directly to the cardboard frame

These Worm Clamps are ideal for attaching aluminum ducts to other aluminum products, including elbows and pipe. Easily adjustable with the turn of a screwdriver, these clamps can be used with all venting applications. A heavy-duty galvanized steel construction ensures longevity through a variety of uses. For optimal performance, it is recommended to use a manual screwdriver to avoid over tightening and stripping the screw.

• Made of heavy duty galvanized steel
• Easily adjustable using a hex or flat head screwdriver
• Adjusts from 5-1/8 in. to 6-1/2 in.
• Can be used in all venting applications

Foam Plus is a powerful, thick cleaning foam aerosol which removes dirt, lint, and grease from air conditioner and heater coil fins. Ideal for dryers, ice machines, radiators, refrigerators, roof heating and cooling units, ventilators, wall and window units. Founded in 1971, Diversitech Corporation is North Americas largest manufacturer of equipment pads and a leading manufacturer and supplier of components and related products for multiple industries, including: HVACR, electrical, consumer hardware retail, electrical utility, automotive retail and pool and spa channel. Diversitechs mission for its wholesaler partners is to simplify their work. We do this by offering more than 200 product categories all from a single manufacturing/supplier source to create product availability and supply chain cost advantages for our customers in every market we serve. We also leverage best-in-class customer service to react quickly and professionally to every customer request.

• Heavy-duty foaming detergent coil cleaner in an aerosol can
• Non-flammable and water-based with no chlorinated solvents
• Blasting foam stream reaches into tight areas for maximum cleaning
• Foaming alkaline detergent quickly liquefies dirt, grease, oil or other residue and is completely self-rinsing on condensate producing coils

Our 102M series is a 2 way air register used for wall or ceiling openings. The stamped face allows for two way air deflection. Our Smooth glide technology ensures rattle free and quiet airflow from your central air system. Smooth glide also provides for smooth opening and closing of your back dampers. Our high quality product will ensure years of continuous use. This product features: high quality steel, white powder coat finish, smooth glide multi-shutter damper, countersunk screw holes, louvers control the amount and direction of airflow.

• Wall or ceiling register controls airflow into a room
• Made of high quality steel
• White powder coat finish
• Louvers control the amount and direction of airflow

Heavy-Duty Round Brass Cap with Neoprene Seal. Brass cap common to HVAC applications. Made of CDA 360 brass.

• Brass construction
• Industry standard cap
• Neoprene seal
• 1/4 in.

Our 102M series is a 2 way air register used for wall or ceiling openings. The stamped face allows for two way air deflection. Our Smooth glide technology ensures rattle free and quiet airflow from your central air system. Smooth glide also provides for smooth opening and closing of your back dampers. Our high quality product will ensure years of continuous use. This product features: high quality steel, white powder coat finish, smooth glide multi-shutter damper, countersunk screw holes, louvers control the amount and direction of airflow.

• Wall or ceiling register controls airflow into a room
• Made of high quality steel
• White powder coat finish
• Louvers control the amount and direction of airflow

Master Flow 26-Gauge 90Adjustable 3 in. Elbow is used to make turns in runs of round pipe and flexible duct through 90. It has a sturdy galvanized steel construction and is simple to adjust. It is also crimped on 1 end to easily fit into a pipe or other fitting of the same diameter. Ships in 90 position.

• Used to make angular or gradual turns in runs of pipe
• Adjustable to any angle through 90
• 26-Gauge, galvanized steel construction
• Always seal seams with building code approved sealant or duct tape (not included)
• Always insulate ductwork for greater system efficiency and comfort (not included)

Rectorseal Safe-T-Switch SS2 New

• Condensate Overflow Switch
• Adjustable ratcheting float level
• Magnetic reed switch
• POP Blister packaged
• Mfg #97087
• Condensate Overflow Switch
• Adjustable ratcheting float level
• Magnetic reed switch
• POP Blister packaged

When you need a motor run capacitor that delivers the extended life your customers demand and the value you desire, you know it is time to go PRO. Titan PRO Professional Grade Motor Run Capacitors get the job done by outperforming standard motor run capacitors of similar value by 83%. Built to the toughest international compliance standards for AC motor run capacitors.

• 60,000 hours operational life
• Built to the toughest international standards for AC motor run capacitors including EIA-456-A and IEC
• 100% electrical testing
• Heavy-edged metalized polypropylene film is used for the dielectric

Valve core with Teflon seal. Compatible with most refrigerants. Industry standard valve cores.

• Replaces SF1515
• Steel construction
• Use with most refrigerants
• Neoprene seal