The Robertshaw 1980 Series Snap-Fit Thermocouples offer easy installation into the majority of pilot burners. They are manufactured without complicated adaptors, but with extra insulation that the brass sheath provides under high ambient temperatures. Various lengths are available.

• Easy burner installation with attached threaded nut
• Stainless steel outer jacket for long life and resistance to heat blistering
• Combination of copper and nickel alloys for good electrical conductivity
• Mica washer to insulate from shorting conditions
• Tinnerman clip included
• Various lengths available for multiple applications

The latest generation in vibration dampening technology and the most effective vibration dampening pad available on the market. The EVA Pad was tested against other pads at four different vibration settings and in the most severe vibration extremes, the EVA Pad outperforms cork and rubber by a margin of greater than 3:1. Founded in 1971, Diversitech Corporation is North Americas largest manufacturer of equipment pads and a leading manufacturer and supplier of components and related products for multiple industries, including: HVACR, electrical, consumer hardware retail, electrical utility, automotive retail and pool and spa channel. Diversitechs mission for its wholesaler partners is to simplify their work. We do this by offering more than 200 product categories all from a single manufacturing/supplier source to create product availability and supply chain cost advantages for our customers in every market we serve. We also leverage best-in-class customer service to react quickly and professionally to every customer request.

• Superior performance is due to the special composite foam center which is much more structurally sound than cork
• It is not affected by oils or chemicals that can break down cork and is much more effective at vibration dampening than solid rubber
• Most effective vibration dampening pad available on the market
• EVA pad outperforms cork and rubber by a margin of greater than 3:1
• Designed to withstand 50 psi

Overview The T Series programmable thermostat streamlines everything from product selection and installation to customer service and support. With a standard footprint and simple interface, the T Series will enhance the entire thermostat experience for you and your customers alike.

• TH4210U2002 2H/1C heat pump and 1H/1C conventional
• TH4110U2005 1H/1C heat pump and 1H/1C conventional
• 7-day, 5-2, 5-1-1 or non-programmable
• Uses the UWP mounting system that's standard across all T Series thermostats
• Easy upsell to a connected Lyric T6 Pro Wi-Fi when your customer is ready for Wi-Fi (C-wire required)
• Simple push-button functionality
• Filter change reminders
• 5-year warranty

The latest generation in vibration dampening technology and the most effective vibration dampening pad available on the market. The EVA Pad was tested against other pads at four different vibration settings and in the most severe vibration extremes, the EVA Pad outperforms cork and rubber by a margin of greater than 3:1. Founded in 1971, Diversitech Corporation is North Americas largest manufacturer of equipment pads and a leading manufacturer and supplier of components and related products for multiple industries, including: HVACR, electrical, consumer hardware retail, electrical utility, automotive retail and pool and spa channel. Diversitechs mission for its wholesaler partners is to simplify their work. We do this by offering more than 200 product categories all from a single manufacturing/supplier source to create product availability and supply chain cost advantages for our customers in every market we serve. We also leverage best-in-class customer service to react quickly and professionally to every customer request.

• Superior performance is due to the special composite foam center which is much more structurally sound than cork
• It is not affected by oils or chemicals that can break down cork and is much more effective at vibration dampening than solid rubber
• Most effective vibration dampening pad available on the market
• EVA pad outperforms cork and rubber by a margin of greater than 3:1
• Designed to withstand 50 psi

Master Flow 26-Gauge 90 Adjustable 4 in. Elbow is used to make turns in runs of round pipe and flexible duct through 90. It has a sturdy galvanized steel construction and is simple to adjust. It is also crimped on 1 end to easily fit into a pipe or other fitting of the same diameter. Ships in 90 position.

• Used to make angular or gradual turns in runs of pipe
• Adjustable to any angle through 90
• 26-Gauge, galvanized steel construction
• Always seal seams with building code approved sealant or duct tape (not included)
• Always insulate ductwork for greater system efficiency and comfort (not included)

Master Flow Drive Cleats and S Cleats are used to join sections of rectangular duct and stack duct in. HVAC systems. These cleats are sleeves of galvanize steel that help to securely assemble the top and bottom (S) and left and right sides (Drive) of rectangular duct runs. S cleats are used to connect the long side of the duct, while Drive cleats are used to connect the short side.

• Always seal seams with code approved mastic or sealant (or duct tape)
• Always insulate ductwork for greater system efficiency and comfort
• S cleats secure bare edges of rectangular duct
• Insulate ductwork to promote system efficiency

This genuine Aprilaire replacement water panel humidifier filter features a porous ceramic-type coating that absorbs water and maintains the proper level of hydration to support the evaporation process. Water is vaporized as air warmed by the furnace passes over the water panel humidifier filter carrying humidified air throughout the house through the air ducts. Aprilaire has been there since the beginning by introducing the first whole-home humidifier in 1954. Since then, we've continued to focus on quality design, engineering and manufacturing to deliver Healthy Humidity to every home. Healthy Humidity reduces the incidence and risk of respiratory infections from airborne viruses. It also helps remedy your dry skin, chronic sore throat, frequent nosebleeds and static shock. Additionally, proper humidity levels protect your home's wood furnishings from cracking or splitting while lowering your energy bill. Keep your Aprilaire Humidifier running at peak performance by replacing your water panel. Maintaining proper humidity levels is integral to maintaining Healthy Air.

• Designed to evaporate water and maintain proper humidity throughout the home
• Convenient 1-pack offers 1-year supply
• Lasts up to 1-year for optimal performance
• Proper humidity in your home has been shown to reduce the incidence of respiratory infections and symptoms related to allergies and asthma by minimizing the formation of bacteria, viruses, fungi and dust mites
• Whole-house humidifier models 350, 360, 560, 560A, 568, 600, 600A, 600M, 700, 700A, 700M, 760, 760A and 768

Dundas Jafine's 4 in. aluminum tension clamps are ideal for use with flexible or semi-rigid ducts. These clamps open and close with pressure. No tool required.

• Ideal for use with flexible or semi-rigid ducts
• Aluminum construction
• No tools necessary
• Easy operation

Our 102M series is a 2 way air register used for wall or ceiling openings. The stamped face allows for two way air deflection. Our Smooth glide technology ensures rattle free and quiet airflow from your central air system. Smooth glide also provides for smooth opening and closing of your back dampers. Our high quality product will ensure years of continuous use. This product features: high quality steel, white powder coat finish, smooth glide multi-shutter damper, countersunk screw holes, louvers control the amount and direction of airflow.

• Wall or ceiling register controls airflow into a room
• Made of high quality steel
• White powder coat finish
• Louvers control the amount and direction of airflow

Heavy Gauge 4 in. Pipe is used to vent boilers, furnaces and hot water heaters. Available in a variety of common lengths, diameters and gauges to help make your next HVAC project a success. A simple snap lock design and sturdy galvanized steel construction combine for a quick and secure installation that you can rely on.

• Easy-to-install snap lock design
• Crimped end with a stop-bead for a secure interlocking fit
• Sturdy 26-Gauge, galvanized steel construction
• Always seal seams with building code approved sealant or duct tape
• Always insulate ductwork for greater system efficiency and comfort

This Dryer Vent Duct is ideal for both gas and electric dryer applications. This duct is UL2158A listed and marked for safe dryer venting. It is constructed of heavy duty, fire resistant, aluminum foil laminate.

• Duct will not support combustion
• Constructed with a high density, corrosion resistant, wire helix
• Duct is air tight
• Note: per UL2158A only ducts 8 ft. or less can bear the UL label
• Note: per UL2158A only ducts 8 or less can be UL marked

This product features a 3 louver damper system that helps to prevent cold air, snow or rain from entering the home. The louvers have been redesigned to help prevent them from sticking. This cap also features a UV resistant coating that prevents the sun from discoloring it.

• Plastic construction
• A recessed caulk line helps to assist in a clean caulking application
• Caps are paintable to match the exterior of your home
• Non-stick louvers
• Ideal for bathroom fan venting, dryer venting and kitchen range hood venting

When you need a motor run capacitor that delivers the extended life your customers demand and the value you desire, you know it is time to go PRO. Titan PRO Professional Grade Motor Run Capacitors get the job done by outperforming standard motor run capacitors of similar value by 83%. Built to the toughest international compliance standards for AC motor run capacitors.

• 60,000 hours operational life
• Built to the toughest international standards for AC motor run capacitors including EIA-456-A and IEC
• 100% electrical testing
• Heavy-edged metalized polypropylene film is used for the dielectric

Our 102M series is a 2 way air register used for wall or ceiling openings. The stamped face allows for two way air deflection. Our Smooth glide technology ensures rattle free and quiet airflow from your central air system. Smooth glide also provides for smooth opening and closing of your back dampers. Our high quality product will ensure years of continuous use. This product features: high quality steel, white powder coat finish, smooth glide multi-shutter damper, countersunk screw holes, louvers control the amount and direction of airflow.

• Wall or ceiling register controls airflow into a room
• Made of high quality steel
• White powder coat finish
• Louvers control the amount and direction of airflow

Improve your home's air quality with this standard-grade furnace filter (12-Pack). Designed with a filtering medium that is continuous filament spun glass, it keeps furnaces and air conditioners clean and running efficiently. It is effective against dust, debris and lint. The frame is made with one continuous piece of chipboard to guard against corner separation. Optimize this filter by changing it monthly during high-use periods; one case will last you a year.

• Lasts up to 30 days
• Change filters monthly for peak energy efficiency
• Low airflow resistance
• UL class II
• Self-retaining media adheres directly to the cardboard frame

These Worm Clamps are ideal for attaching aluminum ducts to other aluminum products, including elbows and pipe. Easily adjustable with the turn of a screwdriver, these clamps can be used with all venting applications. A heavy-duty galvanized steel construction ensures longevity through a variety of uses. For optimal performance, it is recommended to use a manual screwdriver to avoid over tightening and stripping the screw.

• Made of heavy duty galvanized steel
• Easily adjustable using a hex or flat head screwdriver
• Adjusts from 5-1/8 in. to 6-1/2 in.
• Can be used in all venting applications

Foam Plus is a powerful, thick cleaning foam aerosol which removes dirt, lint, and grease from air conditioner and heater coil fins. Ideal for dryers, ice machines, radiators, refrigerators, roof heating and cooling units, ventilators, wall and window units. Founded in 1971, Diversitech Corporation is North Americas largest manufacturer of equipment pads and a leading manufacturer and supplier of components and related products for multiple industries, including: HVACR, electrical, consumer hardware retail, electrical utility, automotive retail and pool and spa channel. Diversitechs mission for its wholesaler partners is to simplify their work. We do this by offering more than 200 product categories all from a single manufacturing/supplier source to create product availability and supply chain cost advantages for our customers in every market we serve. We also leverage best-in-class customer service to react quickly and professionally to every customer request.

• Heavy-duty foaming detergent coil cleaner in an aerosol can
• Non-flammable and water-based with no chlorinated solvents
• Blasting foam stream reaches into tight areas for maximum cleaning
• Foaming alkaline detergent quickly liquefies dirt, grease, oil or other residue and is completely self-rinsing on condensate producing coils

Our 102M series is a 2 way air register used for wall or ceiling openings. The stamped face allows for two way air deflection. Our Smooth glide technology ensures rattle free and quiet airflow from your central air system. Smooth glide also provides for smooth opening and closing of your back dampers. Our high quality product will ensure years of continuous use. This product features: high quality steel, white powder coat finish, smooth glide multi-shutter damper, countersunk screw holes, louvers control the amount and direction of airflow.

• Wall or ceiling register controls airflow into a room
• Made of high quality steel
• White powder coat finish
• Louvers control the amount and direction of airflow

Heavy-Duty Round Brass Cap with Neoprene Seal. Brass cap common to HVAC applications. Made of CDA 360 brass.

• Brass construction
• Industry standard cap
• Neoprene seal
• 1/4 in.

Our 102M series is a 2 way air register used for wall or ceiling openings. The stamped face allows for two way air deflection. Our Smooth glide technology ensures rattle free and quiet airflow from your central air system. Smooth glide also provides for smooth opening and closing of your back dampers. Our high quality product will ensure years of continuous use. This product features: high quality steel, white powder coat finish, smooth glide multi-shutter damper, countersunk screw holes, louvers control the amount and direction of airflow.

• Wall or ceiling register controls airflow into a room
• Made of high quality steel
• White powder coat finish
• Louvers control the amount and direction of airflow

Master Flow 26-Gauge 90Adjustable 3 in. Elbow is used to make turns in runs of round pipe and flexible duct through 90. It has a sturdy galvanized steel construction and is simple to adjust. It is also crimped on 1 end to easily fit into a pipe or other fitting of the same diameter. Ships in 90 position.

• Used to make angular or gradual turns in runs of pipe
• Adjustable to any angle through 90
• 26-Gauge, galvanized steel construction
• Always seal seams with building code approved sealant or duct tape (not included)
• Always insulate ductwork for greater system efficiency and comfort (not included)

Rectorseal Safe-T-Switch SS2 New

• Condensate Overflow Switch
• Adjustable ratcheting float level
• Magnetic reed switch
• POP Blister packaged
• Mfg #97087
• Condensate Overflow Switch
• Adjustable ratcheting float level
• Magnetic reed switch
• POP Blister packaged

When you need a motor run capacitor that delivers the extended life your customers demand and the value you desire, you know it is time to go PRO. Titan PRO Professional Grade Motor Run Capacitors get the job done by outperforming standard motor run capacitors of similar value by 83%. Built to the toughest international compliance standards for AC motor run capacitors.

• 60,000 hours operational life
• Built to the toughest international standards for AC motor run capacitors including EIA-456-A and IEC
• 100% electrical testing
• Heavy-edged metalized polypropylene film is used for the dielectric

Valve core with Teflon seal. Compatible with most refrigerants. Industry standard valve cores.

• Replaces SF1515
• Steel construction
• Use with most refrigerants
• Neoprene seal

The Rochester NOVA air filter is the next generation of extended surface pleated filters. The construction process is automated ensuring consistent quality, uniform appearance and performance. This pleat has eliminated the inconsistencies in pleat spacing, material variations and poor construction common to hand assembled pleated filters. This filter is engineered with only premium materials, eliminated the need for metal support grid found on other pleated filters. The advanced design of if also makes it extremely durable, virtually eliminating shipping and handling damage. The new square pleat tip design provides increased surface contact and added rigidity. The new frame design, couple with the resilient media, allows the new pleat to take considerable abuse from shipping and handling without damage to the filter. The center support strut adds tremendous strength to the frame, producing a tough, rigid filter suitable for long life applications. The NOVA pleat is constructed with 100% synthetic material that is twice the weight of conventional pleated filters. The durable, synthetic media stands up to rough field handling conditions. the thermally bonded synthetic media is not negatively affected by high humidity applications, as is the case with cotton blend pleat media.

• MERV 8
• Self-supported design
• Standard capacity
• Typically lasts 90 days or more

Keep your furnace raised up safely 2 in. off the floor with these handy furnace mounting blocks. Founded in 1971, Diversitech Corporation is North Americas largest manufacturer of equipment pads and a leading manufacturer and supplier of components and related products for multiple industries, including: HVACR, electrical, consumer hardware retail, electrical utility, automotive retail and pool and spa channel. Diversitechs mission for its wholesaler partners is to simplify their work. We do this by offering more than 200 product categories all from a single manufacturing/supplier source to create product availability and supply chain cost advantages for our customers in every market we serve. We also leverage best-in-class customer service to react quickly and professionally to every customer request.

• Each furnace mounting block can support 40% more weight than competitive products over 500 pounds!
• 4 blocks in a pack, one for each bottom corner of the furnace
• Easy peel and stick installation
• Blocks will help your furnace stay dry should water happen to get on the floor
• An excellent and inexpensive option for anyone installing a furnace in a basement, or on any floor where water could be present which would cause damage to the furnace
• Play it safe with your new furnace investment, and keep it "high-and-dry" with a set of furnace blocks

The Rochester NOVA air filter is the next generation of extended surface pleated filters. The construction process is automated ensuring consistent quality, uniform appearance and performance. This pleat has eliminated the inconsistencies in pleat spacing, material variations and poor construction common to hand assembled pleated filters. This filter is engineered with only premium materials, eliminated the need for metal support grid found on other pleated filters. The advanced design of if also makes it extremely durable, virtually eliminating shipping and handling damage. The new square pleat tip design provides increased surface contact and added rigidity. The new frame design, couple with the resilient media, allows the new pleat to take considerable abuse from shipping and handling without damage to the filter. The center support strut adds tremendous strength to the frame, producing a tough, rigid filter suitable for long life applications. The NOVA pleat is constructed with 100% synthetic material that is twice the weight of conventional pleated filters. The durable, synthetic media stands up to rough field handling conditions. the thermally bonded synthetic media is not negatively affected by high humidity applications, as is the case with cotton blend pleat media.

• MERV 8
• Self-supported design
• Standard capacity
• Typically lasts 90 days or more

These fittings are designed to meet most all residential, industrial and irrigation/agricultural needs. Smooth inner walls allow for low pressure drops and resistance to chemicals and corrosion. Founded in 1971, Diversitech Corporation is North Americas largest manufacturer of equipment pads and a leading manufacturer and supplier of components and related products for multiple industries, including: HVACR, electrical, consumer hardware retail, electrical utility, automotive retail and pool and spa channel. Diversitechs mission for its wholesaler partners is to simplify their work. We do this by offering more than 200 product categories all from a single manufacturing/supplier source to create product availability and supply chain cost advantages for our customers in every market we serve. We also leverage best-in-class customer service to react quickly and professionally to every customer request.

• These fittings are designed to meet most all residential, industrial and irrigation/agricultural needs
• Smooth inner walls allow for low pressure drops and resistance to chemicals and corrosion
• Highly versatile, lightweight and easy to install
• White
• Traps (slip x slip)

This is a standard grade furnace filter of the same type that has been protecting furnaces and central air conditioners around the world for over 50 years. The filtering medium is continuous filament spun glass. The frame is made with one continuous piece of chipboard to guard against corner separation. For peak equipment protection and energy efficiency, these filters should be changed monthly in periods of high use. Buy a case and be set for the year.

• Lasts up to 30 days
• Change filters monthly for peak energy efficiency
• Low airflow resistance
• UL class II

Master Flow standard 90 degree Adjustable 6 in. Elbow is used to make turns in runs of round pipe and flexible duct through 90 degree . It has a sturdy galvanized steel construction and is simple to adjust. It is also crimped on 1 end to easily fit into a pipe or other fitting of the same diameter. Ships in 90 degree position.

• Used to make angular or gradual turns in runs of pipe
• Adjustable to any angle through 90 degree
• 30-Gauge, galvanized steel construction
• Always seal seams with building code approved sealant or duct tape (not included)
• Always insulate ductwork for greater system efficiency and comfort (not included)

The Emerson two pole double throw semi-enclosed relay for use in vending machines, appliances, heating and air conditioning applications, and general-purpose switching. This is a switching relay is a 2 Pole relay with 24 VAC coil. This Type 91 relay features DPDT switching and two sets of power rated contacts.

• Easy install
• -40 degree F to 130 degree F temperature range
• Coil voltage 24 Hz
• Coil DC resistance 17.5
• Coil MA 334
• Coil nominal VA 9.5
• Coil inrush VA 22

Sturdy and stable, Diversitech's Heat Pump Riser provides the desired elevation for condensers, heat pumps, and air handlers. The 1-piece, heavy-duty plastic unit is manufactured in three heights. Founded in 1971, Diversitech Corporation is North Americas largest manufacturer of equipment pads and a leading manufacturer and supplier of components and related products for multiple industries, including: HVACR, electrical, consumer hardware retail, electrical utility, automotive retail and pool and spa channel. Diversitechs mission for its wholesaler partners is to simplify their work. We do this by offering more than 200 product categories all from a single manufacturing/supplier source to create product availability and supply chain cost advantages for our customers in every market we serve. We also leverage best-in-class customer service to react quickly and professionally to every customer request.

• Butyl mastic on the top and bottom guarantees no slipping and reduced vibration and noise
• Available in 1 or 2 piece risers
• 4 risers can handle up to 2,000 lb. uniform load
• Elevates condensers, heat pumps and air handlers
• Sturdy and stable

Ceramic fuse link for HX Fan Coil Units

• Yellow color code
• Opens at 300 degree F
• GSA approved
• Provides reliable back-up protection for temperature controlling thermostats.
• Applied to millions of appliances and personal care products.
• Used in office machines, portable heaters and industrial equipment as a thermal safeguard.
• 10 Amps @ 250VAC

Our 102M series is a 2 way air register used for wall or ceiling openings. The stamped face allows for two way air deflection. Our Smooth glide technology ensures rattle free and quiet airflow from your central air system. Smooth glide also provides for smooth opening and closing of your back dampers. Our high quality product will ensure years of continuous use. This product features: high quality steel, white powder coat finish, smooth glide multi-shutter damper, countersunk screw holes, louvers control the amount and direction of airflow.

• Wall or ceiling register controls airflow into a room
• Made of high quality steel
• White powder coat finish
• Louvers control the amount and direction of airflow

24-Volt Heat Sequencer, fan and electric, 2-Switches. On Timings, 30-90 seconds. Off timings 1-30 seconds. Replaces Honeywell, MARS, TOD, GEMLINE, Klixon (Texas Instruments). UL component recognized.

• Direct replacement for most fan / heat sequencing functions
• 2 switches
• On timings: 30-90 seconds
• Off timings: 1-30 seconds
• 24-Volt input control
• Multi-poise mounting
• Any contacts (except M1 and M2) can be used as auxiliary contacts
• Double quick-connect terminals for combination loads

Master Flow Drive Cleats and S Cleats are used to join sections of rectangular duct and stack duct in. HVAC systems, these cleats are sleeves of galvanize steel that help to securely assemble the top and bottom (S) and left and right sides (Drive) of rectangular duct runs. S cleats are used to connect the long side of the duct, while Drive cleats are used to connect the short side.

• Always seal seams with code approved mastic or sealant (or duct tape)
• Always insulate ductwork for greater system efficiency and comfort
• Can be hammered in place
• Insulate ductwork to promote system efficiency

• Broan-Nutone Bath Exhaust Fan, 50 CFM, ENERGY STAR
• 10 Min Install: Easy installation without the need for attic access or additional drywall cutting.
• Efficient Ventilation: 50 CFM offering efficient exhaust ventilation to remove odors and pollutants from rooms up to 45 sq. ft.
• ENERGY STAR Certified: Reduces energy consumption by over 50% compared to standard bath fans.
• No Cut Install: Compact housing with foldable mounting brackets for no cut and versatile installation.
• Brighter white louvered grilles blend in to match most common ceiling paint
• Corrosion resistant galvanized steel housing stands up to moisture
• Permanently lubricated AC motor engineered for continuous operation
• Double strength mounting flanges with keyhole slots
• Quiet polymeric damper prevents cold backdrafts with no metallic clatter
• No electrical knockout to remove
• Removable wiring cover – make connections away from tight corners
• U.L. listed for tub or shower enclosure with GFCI branch wiring
• MFG# 688ES

Enclosed fan relay type 184, 24-Volt coil, SPNO-SPNC. Used for switching Solenoids, fan motors and general purpose switching. UL file number E12139 CSA file number LR13360.

• Coil-voltage 24-Volt
• Normally opened / closed type
• 1/4 in. spade connections 5 pin
• Coils frequency 50 Hz/60 Hz

When you need a motor run capacitor that delivers the extended life your customers demand and the value you desire, you know it's time to go PRO. Titan PRO Professional Grade Motor Run Capacitors get the job done by outperforming standard motor run capacitors of similar value by 83%. Built to the toughest international compliance standards for AC motor run capacitors.

• 60,000 hours operational life
• Built to the toughest international standards for AC motor run capacitors including EIA-456-A and IEC
• 100% electrical testing
• Heavy-edged metalized polypropylene film is used for the dielectric
• Oil filled
• Non PCB oil
• Insulated terminals
• Hertz: 50/60 Hz

The VCMA-15ULS has 1/2 Gal. tank capacity. Little Giant VCMA Series is ideal for collecting, detecting and the automatic removal of condensate from air conditioning equipment, de-humidifiers, high efficiency furnaces, condensing boilers and other equipment where an automatic drain pump is required. Also suitable for high efficiency oil and gas-fired condensing furnace and condensing boiler equipment.

• 1/50 HP high performance motor
• ABS tank, motor cover and volute
• Stainless steel pump shaft
• Snap-action pump switch
• Removable 3/8 in. barbed check valve
• Safety switch included

Create a secure seal around roof piping installations with Water-Tite Roof Flashing. Featuring an elastomer collar, this roof flashing has a thermoplastic hard base and fits any roof pitch to 45 degrees. It has been performance tested for ultraviolet, ozone and weather resistance and is approved for type "B" (gas) installations. Water-Tite Roof Flashing comes in a variety of models with different base sizes and pipe-size compatibilities.

• Roof flashing with thermoplastic hard base
• Elastomer collar, heat tested to 180 degree F (82 degree C)
• Fits any roof pitch to 45 degree , approved for type "B" (gas) installations
• Comes in a variety of models with different base sizes and pipe-size compatibilities
• Performance tested for ultraviolet, ozone and weather resistance, do not use petroleum-base mastics, sealing compounds or paints on collar portion of all flashings, on all hardbase, flexible or rain collars

This product features a robust, wide mouth cap for optimum airflow and snug fit back draft damper. It prevents cold air, snow or rain from entering the home. The removable pest screen slides out easily for removal of lint and debris.

• A removable pest screen helps to keep pests out and allows for easy cleaning of the duct
• Snap on pipe to cap assembly eliminates the need for lint trapping staples
• UV resistant coating helps prevent the cap from discoloring
• Cap is paintable to match the exterior of your home
• Hoods can be used in conjunction with brick, concrete or siding
• The molded caulk edge on the cap helps to maintain a clean caulking application

The 103M 14X08 is a 14 in. x 8 in. 3 way air register used for wall or ceiling openings. The stamped face allows for 3 way air deflection. Our Smoothglide technology ensures rattle free and quiet airflow from your central air system. Smoothglide also provides for smooth opening and closing of your back dampers. Our high quality product will ensure years of continuous use.

• Wall or ceiling registers controls airflow into a room
• Dampers control the amount and direction of airflow
• White powder coat finish
• Made from high quality steel
• SmoothGlide damper

SXT105 is designed for use in AC Controls Systems including air conditioning circuits, thermostats, gas valves, relays or other applications that do not exceed the listed ratings. SXT105 can be used to replace any transformer of same primary voltage and equal or lower VA ratings. This transformer uses a foot mount design.

• Foot mount
• Primary: 120-Volt / 208-Volt / 240-Volt
• Secondary: 24-Volt
• Output VA: 40 VA

The Rochester NOVA air filter is the next generation of extended surface pleated filters. The construction process is automated ensuring consistent quality, uniform appearance and performance. This pleat has eliminated the inconsistencies in pleat spacing, material variations and poor construction common to hand assembled pleated filters. This filter is engineered with only premium materials, eliminated the need for metal support grid found on other pleated filters. The advanced design of if also makes it extremely durable, virtually eliminating shipping and handling damage. The new square pleat tip design provides increased surface contact and added rigidity. The new frame design, couple with the resilient media, allows the new pleat to take considerable abuse from shipping and handling without damage to the filter. The center support strut adds tremendous strength to the frame, producing a tough, rigid filter suitable for long life applications. The NOVA pleat is constructed with 100% synthetic material that is twice the weight of conventional pleated filters. The durable, synthetic media stands up to rough field handling conditions. the thermally bonded synthetic media is not negatively affected by high humidity applications, as is the case with cotton blend pleat media.

• MERV 8
• Self-supported design
• Standard capacity
• Typically lasts 90 days or more

Honeywell Home FocusPRO TH1110U4000/U Thermostat Reduces Job Complexities And Time On-Site While Supporting Recurring Business Thanks To Its Broad System Compatibility UWP wall plate supports speedy installation and easy upgrade Large display and clear font Snap-on private label, customize product with your company contact info Supports single-stage 1H/1C for TH1110U4000/U or up to 3H/2C heat pump and 2H/2C conventional for TH1320U4002/U Optional always-on backlight when hardwired Customizable display settings Intuitive interface for easy navigation Choose to receive filter reminders Heat low limit defaults to 40degree F (4degree C) but configurable to 32degree F (0degree C) for garage applications Dual fuel compatible - 3H/2C model Wired outdoor sensor compatible - 3H/2C model Fan lockout after cool call option 5-year warranty Mfg #TH1110U4000/U

• Reduces Job Complexities And Time On-Site While Supporting Recurring Business Thanks To Its Broad System Compatibility
• UWP wall plate supports speedy installation and easy upgrade
• Large display and clear font
• Snap-on private label, customize product with your company contact info

The 24A34 series electric heat sequencer is a direct replAcement for most fan and heat sequencing functions. This electric heat sequencer features 2 switches and multi-poise mounting. 24 volt input control.

• Terminal markings are equivalent to other types
• 24-Volt input control
• Multi-poise mounting
• Double quick-connect terminals for combination loads
• 1 switch
• On timings 30 - 90 seconds
• Off timings 1 - 30 seconds

When you need a motor run capacitor that delivers the extended life your customers demand and the value you desire, you know its time to go PRO. Titan Professional Grade Motor Run Capacitors get the job done by outperforming standard motor run capacitors of similar value by 83%. Trust Titan Pro.

• 60,000 hours operational life
• Built to the toughest international standards for AC motor run capacitors including EIA-456-A and IEC
• 100% electrical testing
• Heavy-edged metalized polypropylene film is used for the dielectric