The CSVT by Lithonia Lighting is built on the technological framework of the CSS, providing greater customization and performance for everyday spaces. And with the ability to switch lumens and adjust color temperature in one fixture, the CSVT can easily be adapted to the needs of each project - 9 different variations within the same SKU! The CSVT also comes with a 5-year limited warranty.

• TECHNOLOGY: Adjustable Lumen Output (ALO) and Switchable white (SWW) features allow for this strip light to offer 9 potential configurations within one fixture, using two switches
• Energy savings: high-Efficiency LEDs meet DLC Standard
• Dimming: 0-10V dimming standard
• RATINGS: CSA Certified to UL & C-UL Standards for wet location, IP65 and IP66 rated, NSF splash zone rated
• VOLTAGE: MVOLT (120-277V)
• HOURS OF LIFE: Greater than 70 percent LED lumen maintenance at 120,000 hours
• INSTALLATION: Surface (wall, ceiling) or suspended (chain, cable) using standard brackets
• WARRANTY: 5-year limited warranty
• DIMENSIONS: (l x w x h) 50.3 in x 5.4 in x 3.8 in

Lithonia Lighting CNY Adjustable Lumens, Switchable CCT Canopy Fixture, 120-347V. 3 Power Levels Deliver 5,000 - 10,000 Lumens. Switchable CCT (30K/40K/50K) offers warm, cool, and daylight in a single fixture. Integrated On/Off photocell. Integrated occupancy sensor can be turned on, off, or set to 10% dim. Install by surface mount, junction box, or pendant mount. IK08 Impact resistant polycarbonate frosted lens. IP65 rated, die cast aluminum housing. Mfg #CNY LED ALO SWW2 UVOLT PE PIR

• 3 Power Levels Deliver 5,000 - 10,000 Lumens.
• Switchable CCT (30K/40K/50K) offers warm, cool, and daylight in a single fixture
• Integrated On/Off photocell
• Integrated occupancy sensor can be turned on, off, or set to 10% dim

The Lithonia Lighting ESXF LED floodlight is a general-purpose flood that offers awide selection of options and flexibility. Easy access to adjustable lumen output, colorswitching, and a selectable photocell turns the ESXF into the fixture you need on the spot.With its wide flood (7x7) distribution and DLC performance, the ESXF is a cost-effectivesolution, great for illuminating yards, driveways, signage, patios, warehouses, and securityapplications.

• Adjustable Lumen Output Delivers 1500/3000/ 5000 Lumens
• Replaces up to 150W HID Fixtures. Adjustable lumen output 9W/1500 Lumens, 19W/3,000 lumens, 34W/5000 Lumens
• Switchable Color Temperature 3000/4000/5000K
• Selectable Photocell Included Standard
• TWO (2) Mounting options included- Yoke & Slipfitter
• 120/277 Volt
• CI Code: 276ALH

The Lithonia Lighting ESXF LED floodlight is a general-purpose flood that offers awide selection of options and flexibility. Easy access to adjustable lumen output, colorswitching, and a selectable photocell turns the ESXF into the fixture you need on the spot.With its wide flood (7x7) distribution and DLC performance, the ESXF is a cost-effectivesolution, great for illuminating yards, driveways, signage, patios, warehouses, and securityapplications.

• Adjustable Lumen Output Delivers 3500/5500/7500 Lumens
• Replaces up to 250W HID. Adjustable Lumen output 22W/3,500 Lumens, 37W/ 5,500 Lumens, 56W/ 7,500 Lumens
• Switchable Color Temperature 3000/4000/5000K
• Selectable Photocell Included Standard
• TWO (2) Mounting options included- Yoke & Slipfitter
• 120/277 Volt
• CI Code: 276ALU

TWX LED wall-Pack family, a ground-up design that has the low initial cost customers demand while providing superior performance and a traditional form. The TWX3 LED is energy efficient saving up to 84% in energy costs when replacing a metal halide luminaire. The Adjustable Light Output (ALO) feature allows the contractor to set the light output during installation, to a level perfectly suited for the job site. The TWX3 LED ALO luminaires can replace anything from a 100-Watt to 400-Watt metal halide luminaire.

• Adjustable light output maximizes flexibility in the field
• TWX3 LED is energy efficient saving up to 84% in energy costs when replacing a metal halide luminaire
• Hardwired on/off capability only
• CSA certified to US and Canadian standards, listed as a Design Lights Consortium (DLC) qualified product and IP65 rated for outdoor applications
• MVOLT driver operates on any line voltage from 120-Volt to 277-Volt (50 Hz/60 Hz) and can be mounted directly over a standard electrical junction box or back wiring can be connected and stored in the internal compartment
• Light engine(s) configurations consist of high-efficacy LEDs where the advanced optical design uses both reflector and refractor technologies that work together to create superior illumination and further throw, getting the light where it is needed
• Exterior painted parts are protected by a zinc-infused super durable TGIC thermoset powder coat finish providing superior resistance to corrosion and weathering withstanding extreme climate changes without cracking or peeling
• 5-year limited warranty

The outdoor bronze LED 4000K wall mount dusk-to-dawn flood light from Lithonia Lighting provides years of maintenance-free security lighting for residential and commercial applications such as yards, driveways, patios, loading areas and warehouses. The integrated LEDs are rated at 50,000-hours of operation. No bulbs are necessary. That means you don't have to pull out the ladder to replace bulbs, it really lasts that long.

• Energy efficient LED technology
• 4000K cool white color temperature
• Rugged cast aluminum, corrosion-resistant housing with dark bronze finish
• Dusk-to-dawn photocell turns the light on at night and off during the day
• Clear tempered glass lens is fully gasketed to protect LEDs and keep out moisture, dirt and insects
• 120-Volt LED driver
• Mounts easily to existing junction box on wall or under building eave

TWX LED wall-Pack family, a ground-up design that has the low initial cost customers demand while providing superior performance and a traditional form. The TWX3 LED is energy efficient saving up to 84% in energy costs when replacing a metal halide luminaire. The Adjustable Light Output (ALO) feature allows the contractor to set the light output during installation, to a level perfectly suited for the job site. The TWX3 LED ALO luminaires can replace anything from a 100-Watt to 400-Watt metal halide luminaire.

• Adjustable light output maximizes flexibility in the field
• TWX3 LED is energy efficient saving up to 84% in energy costs when replacing a metal halide luminaire
• Hardwired on/off capability only
• CSA certified to US and Canadian standards, listed as a Design Lights Consortium (DLC) qualified product and IP65 rated for outdoor applications
• MVOLT driver operates on any line voltage from 120-Volt to 277-Volt (50 Hz/60 Hz) and can be mounted directly over a standard electrical junction box or back wiring can be connected and stored in the internal compartment
• Light engine(s) configurations consist of high-efficacy LEDs where the advanced optical design uses both reflector and refractor technologies that work together to create superior illumination and further throw, getting the light where it is needed
• Exterior painted parts are protected by a zinc-infused super durable TGIC thermoset powder coat finish providing superior resistance to corrosion and weathering withstanding extreme climate changes without cracking or peeling
• 5-year limited warranty

The Lithonia Lighting 2-Lamp Outdoor Floodlight has a sturdy, weather-resistant cast-aluminum housing and twin adjustable heads. Ideal for walkways, patios, and play areas creating an inviting exterior space as well as providing safety and security. It has a white finish and is designed to connect easily to the junction box. Eave or wall-mount only.

• Weather-resistant aluminum housing and white finish
• Adjustable lamp heads for directional lighting
• Designed for ease of installation
• Uses 2 outdoor-rated, incandescent PAR lamps (sold separately)
• UL Listed
• Tool-free adjustable heads for up/down and side-to-side aiming which allows for light to be focused in two directions and is perfect for mounting on the corner of structures
• Designed for easy mounting to junction box

The Bronze Outdoor Integrated LED Square Wall Mount Flood Light from Lithonia Lighting is the energy-efficient, low-maintenance lighting solution for security lighting saving an estimated $710. incandescent fixtures over its life. This fixture produces an impressive 2017 Lumen of light output. The integrated LEDs are rated at 50,000 hours of operation, so no bulbs are necessary. That means you don't have to pull out the ladder to replace bulbs, it really lasts that long.

• Rugged cast-aluminum, corrosion-resistant rear housing and lamp heads thermally isolate the LED???s and driver promoting long life
• High-performance integrated LEDs produce over 2,000 Lumen and maintain 70% of light output at 50,000 hours of service
• 120 ft. x 70 ft. light coverage at 10 ft. mounting height
• Designed for wall or eave mounting to existing junction box (provided by others), mount 6-10 ft. high for optimum range and detection

Lithonia TWS LED Wall Pack 120-277V Dark Bronze

• (Al0) Adjustable Lumen Output (1,000 / 1,700 / 2,400)
• Switchable Color Temperatures (3000K, 4000K, 5000K)
• Replaces up to 100W Metal Halide/70W HPS, saves 80% energy
• Traditional form factor, and payback within two years
• Switchable on/off Photocell for dusk to dawn operation
• This fixture was designed to fit seamlessly — eliminating unwanted markings from the removal of older fixtures. Replace one or replace them all, either case, with energy savings of up to 80%, Lithonia has you covered.
• Mfg #TWS LEDALO SWW2 MVOLT PE DDBM2
• LED Wall
• Dark Bronze
• Pack 120-277v
• TWSLEDALO SWW2 MVOLT PE DDBM2

TWX LED wall-Pack family, a ground-up design that has the low initial cost customers demand while providing superior performance and a traditional form. The TWX1 LED is energy efficient saving up to 83% in energy costs when replacing a metal halide luminaire. The Adjustable Light Output (ALO) feature allows the contractor to set the light output during installation, to a level perfectly suited for the job site. The TWX1 LED ALO luminaires can replace anything from a CFL to 100-Watt metal halide luminaire.

• Adjustable light output maximizes flexibility in the field
• TWX1 LED is energy efficient saving up to 83% in energy costs when replacing a metal halide luminaire
• Hardwired on/off capability only
• CSA certified to US and Canadian standards, listed as a Design Lights Consortium (DLC) qualified product and IP65 rated for outdoor applications
• MVOLT driver operates on any line voltage from 120-Volt to 277-Volt (50 Hz/60 Hz) and can be mounted directly over a standard electrical junction box or back wiring can be connected and stored in the internal compartment
• Light engine(s) configurations consist of high-efficacy LEDs where the advanced optical design uses both reflector and refractor technologies that work together to create superior illumination and further throw, getting the light where it is needed
• Exterior painted parts are protected by a zinc-infused super durable TGIC thermoset powder coat finish providing superior resistance to corrosion and weathering withstanding extreme climate changes without cracking or peeling
• 5-year limited warranty

Lithonia Lighting LED Wall Pack With Adjustable Lumen Output And Photocell

• Switchable Lumens (1,450 - 6,850 Lumens)
• 4000K Color Temperature
• 120-277 Volts
• Photocell
• Die Cast Aluminum Housing
• Ideal For Carports, Loading Areas, Driveways, And Parking Areas
• Wall Mounting
• 100,000 Hours
• Textured Dark Bronze Finish
• Mfg #TWX2 LED ALO 40K MVOLT PE DDBTXD
• Switchable Lumens (1,450 - 6,850 Lumens)
• 4000K Color Temperature
• 120-277 Volts
• Photocell

TWX LED wall pack family, a ground-up design that has the low initial cost customers demand while providing superior performance and a traditional form. The TWX2 LED is energy efficient saving up to 82% in energy costs when replacing a metal halide luminaire. The Adjustable Light Output (ALO) feature allows the contractor to set the light output during installation, to a level perfectly suited for the job site. The TWX2 LED ALO luminaires can replace anything from a 70-Watt to 250-Watt metal halide luminaire.

• Adjustable light output maximizes flexibility in the field
• TWX2 LED is energy efficient saving up to 82% in energy costs when replacing a metal halide luminaire
• Hardwired on/off capability only
• CSA certified to US and Canadian standards, listed as a DesignLights Consortium (DLC) qualified product and IP65 rated for outdoor applications
• MVOLT driver operates on any line voltage from 120-Volt to 277-Volt (50 Hz/60 Hz) and can be mounted directly over a standard electrical junction box or back wiring can be connected and stored in the internal compartment
• Light engine(s) configurations consist of high-efficacy LEDs where the advanced optical design uses both reflector and refractor technologies that work together to create superior illumination and further throw, getting the light where it is needed
• Exterior painted parts are protected by a zinc-infused super durable TGIC thermoset powder coat finish providing superior resistance to corrosion and weathering withstanding extreme climate changes without cracking or peeling
• 5-year limited warranty

TWX LED wall-Pack family, a ground-up design that has the low initial cost customers demand while providing superior performance and a traditional form. The TWX1 LED is energy efficient saving up to 83% in energy costs when replacing a metal halide luminaire. The Adjustable Light Output (ALO) feature allows the contractor to set the light output during installation, to a level perfectly suited for the job site. The TWX1 LED ALO luminaires can replace anything from a CFL to 100-Watt metal halide luminaire.

• Adjustable light output maximizes flexibility in the field
• TWX1 LED is energy efficient saving up to 83% in energy costs when replacing a metal halide luminaire
• Hardwired on/off capability only
• CSA certified to US and Canadian standards, listed as a Design Lights Consortium (DLC) qualified product and IP65 rated for outdoor applications
• MVOLT driver operates on any line voltage from 120-Volt to 277-Volt (50 Hz/60 Hz) and can be mounted directly over a standard electrical junction box or back wiring can be connected and stored in the internal compartment
• Light engine(s) configurations consist of high-efficacy LEDs where the advanced optical design uses both reflector and refractor technologies that work together to create superior illumination and further throw, getting the light where it is needed
• Exterior painted parts are protected by a zinc-infused super durable TGIC thermoset powder coat finish providing superior resistance to corrosion and weathering withstanding extreme climate changes without cracking or peeling
• 5-year limited warranty

TWX LED wall-pack family, a ground-up design that has the low initial cost customers demand while providing superior performance and a traditional form. The TWX1 LED is energy efficient saving up to 83% in energy costs when replacing a metal halide luminaire. The TWX1 LED ALO luminaires can replace anything from a CFL to 100-Watt metal halide luminaire.

• Premium borosilicate glass lens works in conjunction with the high-efficiency light engine to provide superior illumination while minimizing wasted up-light
• TWX1 LED is energy efficient saving up to 83% in energy costs when replacing a metal halide luminaire
• CSA certified to US and Canadian standards, listed as a Design Lights Consortium (DLC) qualified product and IP65 rated for outdoor applications
• MVOLT driver operates on any line voltage from 120-Volt to 277-Volt (50 Hz/60 Hz) and can be mounted directly over a standard electrical junction box or back wiring can be connected and stored in the internal compartment
• Light engine(s) configurations consist of high-efficacy LEDs where the advanced optical design uses both Reflector and Refractor technologies that work together to create superior illumination and further throw, getting the light where it is needed
• Exterior painted parts are protected by a zinc-infused super durable TGIC thermoset powder coat finish providing superior resistance to corrosion and weathering withstanding extreme climate changes without cracking or peeling
• 5-year limited warranty

TWX LED wall pack family, a ground-up design that has the low initial cost customers demand while providing superior performance and a traditional form. The TWX2 LED is energy efficient saving up to 82% in energy costs when replacing a metal halide luminaire. The Adjustable Light Output (ALO) feature allows the contractor to set the light output during installation, to a level perfectly suited for the job site. The TWX2 LED ALO luminaires can replace anything from a 70W to 250W metal halide luminaire.

• TECHNOLOGY: Adjustable light output maximizes flexibility in the field and allows you to dial in the lumens you need
• ENERGY SAVINGS: The TWX2 LED is energy efficient saving up to 82% in energy costs when replacing a metal halide luminaire
• CONTROLS: Hardwired on/off capability only
• RATINGS: CSA certified to US and Canadian standards, listed as a Design Lights Consortium (DLC) qualified product and IP65 rated for outdoor applications
• VOLTAGE: MVOLT driver operates on any line voltage from 120-277V (50/60Hz) and can be mounted directly over a standard electrical junction box or back wiring can be connected and stored in the internal compartment
• HOURS OF LIFE: Light engine(s) configurations consist of high-efficacy LEDs where the advanced optical design uses both reflector and refractor technologies that work together to create superior illumination and further throw
• FINISH: Exterior painted parts are protected by a zinc-infused Super Durable TGIC thermoset powder coat finish providing superior resistance to corrosion and weathering withstanding extreme climate changes without cracking or peeling
• WARRANTY: Five-year limited warranty
• DIMENSIONS: 4.5 in x 9 in x 13 in
• LUMENS: Adjustable Light Output to dial in the lumens needed
• OPTICS: Advanced optical design creates better illumination
• DESIGN: Low profile and covers footprint of typical HID wall pack