Lithonia Lighting LED Wall Pack With Adjustable Lumen Output And Photocell

• Switchable Lumens (1,450 - 6,850 Lumens)
• 4000K Color Temperature
• 120-277 Volts
• Photocell
• Die Cast Aluminum Housing
• Ideal For Carports, Loading Areas, Driveways, And Parking Areas
• Wall Mounting
• 100,000 Hours
• Textured Dark Bronze Finish
• Mfg #TWX2 LED ALO 40K MVOLT PE DDBTXD
• Switchable Lumens (1,450 - 6,850 Lumens)
• 4000K Color Temperature
• 120-277 Volts
• Photocell

Lithonia TWS LED Wall Pack 120-277V Dark Bronze

• (Al0) Adjustable Lumen Output (1,000 / 1,700 / 2,400)
• Switchable Color Temperatures (3000K, 4000K, 5000K)
• Replaces up to 100W Metal Halide/70W HPS, saves 80% energy
• Traditional form factor, and payback within two years
• Switchable on/off Photocell for dusk to dawn operation
• This fixture was designed to fit seamlessly — eliminating unwanted markings from the removal of older fixtures. Replace one or replace them all, either case, with energy savings of up to 80%, Lithonia has you covered.
• Mfg #TWS LEDALO SWW2 MVOLT PE DDBM2
• LED Wall
• Dark Bronze
• Pack 120-277v
• TWSLEDALO SWW2 MVOLT PE DDBM2

Beaming 1400 lumens of warm white light, this LED wall pack is an ideal security solution for non-industrial settings such as apartment complexes and high-end restaurants. The bronze powder-coated fixture has a sophisticated polish, welcoming guests and customers in entryways, on columns and at wall perimeters with a soft, glare-free glow from halo end caps. Expect the aluminum casing to resist corrosion for more than 50,000 hours of maintenance-free use. Installation is easy with the universal junction box mounting plate and the 20-Watt LED bulb will save $50 in annual energy costs, well beyond PROBRITEs 5-year warranty.

• 1400 lumens provide security for non-industrial settings such as apartment complexes and high-end restaurants
• 3000K warm white light makes guests and customers feel welcome and safe
• 20-Watt LED uses 80% less energy than standard 100-Watt bulb for an annual energy savings of $50
• Aesthetically pleasing bronze casing have frosted end caps that provide a glare-free glow
• Can be mounted from 5 ft. to 15 ft. in entryways, on columns or at wall perimeters
• Easy to install using a universal junction box mounting plate
• Standard 120-Volt, switch-controlled operation
• 100% maintenance-free for more than 50,000 hours (about 23 years) of operation
• Corrosion-resistant aluminum is cULus-listed for wet locations with impact-resistant UV-stabilized polycarbonate lenses
• 5-year worry-free manufacturers warranty

ETI 200-Watt Bronze Integrated LED Wall Pack Light 120-277 V. Led Wall Pack With 0-90 Degree Adjustable Head. LUMEN BOOST LEVELS: 3900-6750 Lumens - (Low) 30-Watts, (Medium) 40-Watts, (High) 50-Watts. COLOR TEMPERATURE OPTIONS: 3000K Soft White, 4000K Bright White and 5000K Daylight. Durable die-cast aluminum back housing with dark Bronze powder coat finish. Mfg #61508101

• Led Wall Pack With 0-90 Degree Adjustable Head
• LUMEN BOOST LEVELS: 3900-6750 Lumens - (Low) 30-Watts, (Medium) 40-Watts, (High) 50-Watts
• COLOR TEMPERATURE OPTIONS: 3000K Soft White, 4000K Bright White and 5000K Daylight
• Durable die-cast aluminum back housing with dark Bronze powder coat finish

ETI 200 Watt Bronze Integrated LED Wall Pack Light 120-277 V. Led Wall Pack With 0-90 Degree Adjustable Head. LUMEN BOOST LEVELS: 6600-10800 Lumens - 50-Watts, 65-Watts, 80-Watts. COLOR TEMPERATURE OPTIONS: 3000K Soft White, 4000K Bright White and 5000K Daylight. Durable die-cast aluminum back housing with dark Bronze powder coat finish. Mfg #61508201

• Led Wall Pack With 0-90 Degree Adjustable Head
• LUMEN BOOST LEVELS: 6600-10800 Lumens - 50-Watts, 65-Watts, 80-Watts
• COLOR TEMPERATURE OPTIONS: 3000K Soft White, 4000K Bright White and 5000K Daylight
• Durable die-cast aluminum back housing with dark Bronze powder coat finish

Security lighting is highly suggested by most neighborhood watch, HOA's, police and insurance companies. ETi 9 in. LED Wall Pack offers multiple operating functions and features to complete all your outdoor security lighting needs. This wall pack has a motion sensor with timer, Lumen Boost activation when motion is detected, Dusk to Dawn Photocell option and choice of 3-color temperatures of light output Soft White, Bright White or Daylight. Constructed of durable weatherproof materials and energy-efficient light engine, this wall pack ensures maintenance free service with no bulbs to replace. Suggested applications such as side/corner/back of house, private entry, storage/tool unit, pool/cabana area or landscape lighting.

• Motion sensor with adjustable timer : 2/5/15 minutes
• Motion sensor detects at 120°
• Lumen Boost Levels (of brightness): 1175 Lumens Main Light mode - When motion is detected, the light boosts up to 2350 Lumens and maximum 22-Watts
• Dusk to Dawn photocell function senses light or lack of light in a specific area, customize to turn on/off automatically or stay on throughout the night
• Color Temperature Options: 3000K Soft White, 4000K Bright White or 5000K Daylight
• 120-277v Multi-Volt
• IP65 rated - Suitable for wet locations
• Durable, diecast aluminum, all weather, light weight construction
• Operates reliably in extreme sub-zero down to -40°F up to 113°F
• Product Dimensions: 8.3in. L x 5.5in. W x 3.6in. H
• Maintenance free with no need to replace bulbs
• Rated life up to 50,000 hours
• 5 year warranty

The Bronze Outdoor Integrated LED Square Wall Mount Flood Light from Lithonia Lighting is the energy-efficient, low-maintenance lighting solution for security lighting saving an estimated $710. incandescent fixtures over its life. This fixture produces an impressive 2017 Lumen of light output. The integrated LEDs are rated at 50,000 hours of operation, so no bulbs are necessary. That means you don't have to pull out the ladder to replace bulbs, it really lasts that long.

• Rugged cast-aluminum, corrosion-resistant rear housing and lamp heads thermally isolate the LED???s and driver promoting long life
• High-performance integrated LEDs produce over 2,000 Lumen and maintain 70% of light output at 50,000 hours of service
• 120 ft. x 70 ft. light coverage at 10 ft. mounting height
• Designed for wall or eave mounting to existing junction box (provided by others), mount 6-10 ft. high for optimum range and detection

TWX LED wall pack family, a ground-up design that has the low initial cost customers demand while providing superior performance and a traditional form. The TWX2 LED is energy efficient saving up to 82% in energy costs when replacing a metal halide luminaire. The Adjustable Light Output (ALO) feature allows the contractor to set the light output during installation, to a level perfectly suited for the job site. The TWX2 LED ALO luminaires can replace anything from a 70W to 250W metal halide luminaire.

• TECHNOLOGY: Adjustable light output maximizes flexibility in the field and allows you to dial in the lumens you need
• ENERGY SAVINGS: The TWX2 LED is energy efficient saving up to 82% in energy costs when replacing a metal halide luminaire
• CONTROLS: Hardwired on/off capability only
• RATINGS: CSA certified to US and Canadian standards, listed as a Design Lights Consortium (DLC) qualified product and IP65 rated for outdoor applications
• VOLTAGE: MVOLT driver operates on any line voltage from 120-277V (50/60Hz) and can be mounted directly over a standard electrical junction box or back wiring can be connected and stored in the internal compartment
• HOURS OF LIFE: Light engine(s) configurations consist of high-efficacy LEDs where the advanced optical design uses both reflector and refractor technologies that work together to create superior illumination and further throw
• FINISH: Exterior painted parts are protected by a zinc-infused Super Durable TGIC thermoset powder coat finish providing superior resistance to corrosion and weathering withstanding extreme climate changes without cracking or peeling
• WARRANTY: Five-year limited warranty
• DIMENSIONS: 4.5 in x 9 in x 13 in
• LUMENS: Adjustable Light Output to dial in the lumens needed
• OPTICS: Advanced optical design creates better illumination
• DESIGN: Low profile and covers footprint of typical HID wall pack

TWX LED wall-Pack family, a ground-up design that has the low initial cost customers demand while providing superior performance and a traditional form. The TWX3 LED is energy efficient saving up to 84% in energy costs when replacing a metal halide luminaire. The Adjustable Light Output (ALO) feature allows the contractor to set the light output during installation, to a level perfectly suited for the job site. The TWX3 LED ALO luminaires can replace anything from a 100-Watt to 400-Watt metal halide luminaire.

• Adjustable light output maximizes flexibility in the field
• TWX3 LED is energy efficient saving up to 84% in energy costs when replacing a metal halide luminaire
• Hardwired on/off capability only
• CSA certified to US and Canadian standards, listed as a Design Lights Consortium (DLC) qualified product and IP65 rated for outdoor applications
• MVOLT driver operates on any line voltage from 120-Volt to 277-Volt (50 Hz/60 Hz) and can be mounted directly over a standard electrical junction box or back wiring can be connected and stored in the internal compartment
• Light engine(s) configurations consist of high-efficacy LEDs where the advanced optical design uses both reflector and refractor technologies that work together to create superior illumination and further throw, getting the light where it is needed
• Exterior painted parts are protected by a zinc-infused super durable TGIC thermoset powder coat finish providing superior resistance to corrosion and weathering withstanding extreme climate changes without cracking or peeling
• 5-year limited warranty

TWX LED wall-Pack family, a ground-up design that has the low initial cost customers demand while providing superior performance and a traditional form. The TWX1 LED is energy efficient saving up to 83% in energy costs when replacing a metal halide luminaire. The Adjustable Light Output (ALO) feature allows the contractor to set the light output during installation, to a level perfectly suited for the job site. The TWX1 LED ALO luminaires can replace anything from a CFL to 100-Watt metal halide luminaire.

• Adjustable light output maximizes flexibility in the field
• TWX1 LED is energy efficient saving up to 83% in energy costs when replacing a metal halide luminaire
• Hardwired on/off capability only
• CSA certified to US and Canadian standards, listed as a Design Lights Consortium (DLC) qualified product and IP65 rated for outdoor applications
• MVOLT driver operates on any line voltage from 120-Volt to 277-Volt (50 Hz/60 Hz) and can be mounted directly over a standard electrical junction box or back wiring can be connected and stored in the internal compartment
• Light engine(s) configurations consist of high-efficacy LEDs where the advanced optical design uses both reflector and refractor technologies that work together to create superior illumination and further throw, getting the light where it is needed
• Exterior painted parts are protected by a zinc-infused super durable TGIC thermoset powder coat finish providing superior resistance to corrosion and weathering withstanding extreme climate changes without cracking or peeling
• 5-year limited warranty

TWX LED wall pack family, a ground-up design that has the low initial cost customers demand while providing superior performance and a traditional form. The TWX2 LED is energy efficient saving up to 82% in energy costs when replacing a metal halide luminaire. The Adjustable Light Output (ALO) feature allows the contractor to set the light output during installation, to a level perfectly suited for the job site. The TWX2 LED ALO luminaires can replace anything from a 70-Watt to 250-Watt metal halide luminaire.

• Adjustable light output maximizes flexibility in the field
• TWX2 LED is energy efficient saving up to 82% in energy costs when replacing a metal halide luminaire
• Hardwired on/off capability only
• CSA certified to US and Canadian standards, listed as a DesignLights Consortium (DLC) qualified product and IP65 rated for outdoor applications
• MVOLT driver operates on any line voltage from 120-Volt to 277-Volt (50 Hz/60 Hz) and can be mounted directly over a standard electrical junction box or back wiring can be connected and stored in the internal compartment
• Light engine(s) configurations consist of high-efficacy LEDs where the advanced optical design uses both reflector and refractor technologies that work together to create superior illumination and further throw, getting the light where it is needed
• Exterior painted parts are protected by a zinc-infused super durable TGIC thermoset powder coat finish providing superior resistance to corrosion and weathering withstanding extreme climate changes without cracking or peeling
• 5-year limited warranty

TWX LED wall-Pack family, a ground-up design that has the low initial cost customers demand while providing superior performance and a traditional form. The TWX3 LED is energy efficient saving up to 84% in energy costs when replacing a metal halide luminaire. The Adjustable Light Output (ALO) feature allows the contractor to set the light output during installation, to a level perfectly suited for the job site. The TWX3 LED ALO luminaires can replace anything from a 100-Watt to 400-Watt metal halide luminaire.

• Adjustable light output maximizes flexibility in the field
• TWX3 LED is energy efficient saving up to 84% in energy costs when replacing a metal halide luminaire
• Hardwired on/off capability only
• CSA certified to US and Canadian standards, listed as a Design Lights Consortium (DLC) qualified product and IP65 rated for outdoor applications
• MVOLT driver operates on any line voltage from 120-Volt to 277-Volt (50 Hz/60 Hz) and can be mounted directly over a standard electrical junction box or back wiring can be connected and stored in the internal compartment
• Light engine(s) configurations consist of high-efficacy LEDs where the advanced optical design uses both reflector and refractor technologies that work together to create superior illumination and further throw, getting the light where it is needed
• Exterior painted parts are protected by a zinc-infused super durable TGIC thermoset powder coat finish providing superior resistance to corrosion and weathering withstanding extreme climate changes without cracking or peeling
• 5-year limited warranty

TWX LED wall-Pack family, a ground-up design that has the low initial cost customers demand while providing superior performance and a traditional form. The TWX1 LED is energy efficient saving up to 83% in energy costs when replacing a metal halide luminaire. The Adjustable Light Output (ALO) feature allows the contractor to set the light output during installation, to a level perfectly suited for the job site. The TWX1 LED ALO luminaires can replace anything from a CFL to 100-Watt metal halide luminaire.

• Adjustable light output maximizes flexibility in the field
• TWX1 LED is energy efficient saving up to 83% in energy costs when replacing a metal halide luminaire
• Hardwired on/off capability only
• CSA certified to US and Canadian standards, listed as a Design Lights Consortium (DLC) qualified product and IP65 rated for outdoor applications
• MVOLT driver operates on any line voltage from 120-Volt to 277-Volt (50 Hz/60 Hz) and can be mounted directly over a standard electrical junction box or back wiring can be connected and stored in the internal compartment
• Light engine(s) configurations consist of high-efficacy LEDs where the advanced optical design uses both reflector and refractor technologies that work together to create superior illumination and further throw, getting the light where it is needed
• Exterior painted parts are protected by a zinc-infused super durable TGIC thermoset powder coat finish providing superior resistance to corrosion and weathering withstanding extreme climate changes without cracking or peeling
• 5-year limited warranty

Simply Conserve's field-adjustable mini wall pack includes dip switches on the unit, allowing for adjustment of the input power and color temperature. There is also a dip switch to toggle photocell functionality on or off. This mini wall pack's durable construction allows for easy installation in a variety of applications for new construction, remodel, and retrofit projects.

• This 15/20/25 Watt lamp is equivalent to 50/60/70 watts, is DLC listed for energy conservation and savings and is wet rated
• Easy insallation in a variety of applications for new construction, remodel, and retrofit projects
• Field-adjustable lumen and CCT
• LED bulb has lower energy consumption, are L70-rated and have a lifetime of 50,000-hours
• Constructed of durable UV-stablized PC lens
• Use with both 120-Volt and 277-Volts
• Built-in photocell for dusk to dawn operation, with toggle to bypass
• 1800/2400/3000 Lumens
• 3000K (warm white)/4000K (cool white)/5000K (daylight)
• Wet-location, IP65-rated
• Architectural bronze finish, anti-corrosion spray
• Pack of 5
• Model number: L15/25-MWP-30/50-120/277-PC

The ProLED WPS Wallpack Series provides the best value in the Commercial and Industrial Wallpack market to date. The WPS Series products are made of high quality, die-cast aluminum housings and a shatter resistant Borosilicate Glass Lens which offers a traditional, yet robust design. The traditional mounting design with 1/2 in. knock outs on sides makes installation a breeze.

• Brightness: 9865 Lumens
• Lifetime: 50,000-hours
• Color temperature: 5000K, 80 CRI daylight
• Energy used 80-Watt (equivalent to a 250-Watt metal halide bulb
• Ideal for use in factories, warehouses, self storage, commercial and industrial buildings
• Dimmable
• DLC Listed, title 24 compliant, UL Listed for wet locations
• 5-year warranty

ETI 200 Watt Integrated LED Bronze Wall Pack Light 120-277 V. 3 Lumen Boost Levels: 8400-14,000 Lumens - (Low) 60-Watts (Medium) 80-Watts, (High) 100-Watts - Type 4 Light Distribution. COLOR TEMPERATURE OPTIONS: 3000K Soft White, 4000K Bright White, 5000K Daylight. Corrosion resistant, rugged die-cast aluminum housing with Bronze powder coat paint finish. Hinged housing allows for easy access to wiring, wattage and CCT select. Mfg #61512101

• 3 Lumen Boost Levels: 8400-14,000 Lumens - (Low) 60-Watts (Medium) 80-Watts, (High) 100-Watts - Type 4 Light Distribution
• COLOR TEMPERATURE OPTIONS: 3000K Soft White, 4000K Bright White, 5000K Daylight
• Corrosion resistant, rugged die-cast aluminum housing with Bronze powder coat paint finish
• Hinged housing allows for easy access to wiring, wattage and CCT select

The ProLED WPS Wallpack Series provides the best value in the Commercial and Industrial Wallpack market to date. The WPS Series products are made of high quality, die-cast aluminum housings and a shatter resistant Borosilicate Glass Lens which offers a traditional, yet robust design. The traditional mounting design with 1/2 in. knock outs on sides makes installation a breeze.

• Brightness: 4948 Lumens
• Lifetime: 50,000-hours
• Color temperature: 5000K, 80CRI daylight
• Energy used 80-Watt (equivalent to a 175-Watt metal halide bulb)
• Ideal for use in factories, warehouses, self storage, commercial and industrial buildings
• Dimmable
• DLC Listed, title 24 compliant, UL Listed for wet locations
• 5-year warranty

The compact LED LitePak LNC is designed for entry/perimeter illumination with a type III light distribution. Typical mounting height is up to 12 ft. with 40 ft. fixture spacing. It has long-life LEDs at 60,000 hours, L96 rating.

• Die-cast aluminum housing with decorative styling
• Rugged design protects internal components and provides excellent thermal management
• Ambient diffuser included for applications near entrances or locations where reduced brightness is desired
• Dark bronze powder paint finish provides lasting appearance in outdoor environments
• Quick mount adapter provides quick installation
• Listed and labeled to UL 1598 for wet locations
• Design lights consortium qualified

The Wall Pack luminaires are environmentally preferable LED alternatives to traditional HID luminaires, offering up to 77% in energy savings. Ideal in place of traditional luminaires or as new installations, the Wall Pack series is offered in 7-Watt/lumen packages for illuminating building exteriors, outdoor corridors, walkways and stairwells. The housing is a perfect fit for replacing existing traditional luminaires and minimizes light pollution through its cut-off design. The luminaires are available with optional photo control. Sylvania luminaires assure optimum light engine performance for extended service and rated life (150,000-hours L70).

• Traditional or sleek housing and optics designed to maximize spacing and improve light distribution
• Traditional backplate with hinged housing cover and knockouts for easy installation
• High efficacy meets DLC standard or premium requirements to ensure quality and incentive qualifications
• Made from 2-piece cast aluminum alloy housing with powder coat paint finish and a glass lens
• LED system with a life rating of 150,000-hours at L70 at 25 degree C, luminaire efficacy up to 135 LPW
• LED driver has a 4kV inherent surge suppression and is a constant current device, meeting UL1310 and UL48 class 2 with built-in over temperature protection
• Luminaire mounts to exterior wall external controls can be added through existing knockouts
• Power factor is 90% and THD is 20%

The ProLED Select SekurPak boasts a rugged, yet slim architectural form factor that provides incredibly efficient and high-quality illumination. The SekurPak features ProLED Select CCT field Selectable technology, as well as an integral dusk-to-dawn photocell that can be enabled or disabled based on requirement. With these distinct features, the SekurPak is an ideal solution for all commercial, industrial and multi-residential security lighting applications.

• Brightness: 2200 Lumens to 2700 Lumens
• Lifetime: 50,000-hours
• Color temperature: 3000K, 4000K, 5000K, 80 CRI selectable
• Energy used 20-Watt (equivalent to a 150-Watt MH-Watt metal halide light bulb)
• Ideal for use in warehouses, entryways, perimeter, security, shopping centers, schools, and apartments
• Dusk to dawn
• Selectable 3 CCT 3000K, 4000K and 5000K color temperature
• DLC listed and UL Listed for wet locations
• 5-year warranty
• Shatter resistant polycarbonate lens

The ProLED WPS Wallpack Series provides the best value in the Commercial and Industrial Wallpack market to date. The WPS Series products are made of high quality, die-cast aluminum housings and a shatter resistant Borosilicate Glass Lens which offers a traditional, yet robust design. The traditional mounting design with 1/2 in. knock outs on sides makes installation a breeze.

• Brightness: 3514 Lumens
• Lifetime: 50,000-hours
• Color temperature: 4000K, 80CRI cool white
• Energy used 25-Watt (equivalent to a 100-Watt metal halide bulb)
• Ideal for use in factories, warehouses, self storage, commercial and industrial buildings
• Dimmable
• DLC Listed, title 24 compliant, UL Listed for wet locations
• 5-year warranty

The VTC is an LED Vaportite with an attractive design that efficiently lights any application requiring enclosed and gasketed fixtures. This is the pendant mount version with light output over 1300 Lumens at 27-Watt. Good applications for the VTC include manufacturing areas, elevator pits, catwalks, and refineries.

• Die cast socket body containing the LED driver and circuit board
• Low copper alloy die cast aluminum
• High quality gray polyester powder coat
• Frosted glass globe for general lighting needs
• Minus 30 degree C to 40 degree C rated for ambient temperature
• CSA tested to UL1598 wet location
• 5-year warranty from date of purchase

The ProLED WPS Wallpack Series provides the best value in the Commercial and Industrial Wallpack market to date. The WPS Series products are made of high quality, die-cast aluminum housings and a shatter resistant Borosilicate Glass Lens which offers a traditional, yet robust design. The traditional mounting design with 1/2 in. knock outs on sides makes installation a breeze.

• Brightness: 3609 Lumens
• Lifetime: 50,000-hours
• Color temperature: 5000K, 80CRI daylight
• Energy used 25-Watt (equivalent to a 100-Watt metal halide bulb)
• Ideal for use in factories, warehouses, self storage, commercial and industrial buildings
• Dimmable
• DLC Listed, title 24 compliant, UL Listed for wet locations
• 5-year warranty

The ProLED WPS Wallpack Series provides the best value in the Commercial and Industrial Wallpack market to date. The WPS Series products are made of high quality, die-cast aluminum housings and a shatter resistant Borosilicate Glass Lens which offers a traditional, yet robust design. The traditional mounting design with 1/2 in. knock outs on sides makes installation a breeze.

• Brightness: 14465 Lumens
• Lifetime: 50,000-hours
• Color temperature: 5000K, 80CRI daylight
• Energy used 120-Watt (equivalent to a 400-Watt metal halide bulb)
• Ideal for use in factories, warehouses, self storage, commercial and industrial buildings
• Dimmable
• DLC Listed, title 24 compliant, UL Listed for wet locations
• 5-year warranty