The CSVT by Lithonia Lighting is built on the technological framework of the CSS, providing greater customization and performance for everyday spaces. And with the ability to switch lumens and adjust color temperature in one fixture, the CSVT can easily be adapted to the needs of each project - 9 different variations within the same SKU! The CSVT also comes with a 5-year limited warranty.

• TECHNOLOGY: Adjustable Lumen Output (ALO) and Switchable white (SWW) features allow for this strip light to offer 9 potential configurations within one fixture, using two switches
• Energy savings: high-Efficiency LEDs meet DLC Standard
• Dimming: 0-10V dimming standard
• RATINGS: CSA Certified to UL & C-UL Standards for wet location, IP65 and IP66 rated, NSF splash zone rated
• VOLTAGE: MVOLT (120-277V)
• HOURS OF LIFE: Greater than 70 percent LED lumen maintenance at 120,000 hours
• INSTALLATION: Surface (wall, ceiling) or suspended (chain, cable) using standard brackets
• WARRANTY: 5-year limited warranty
• DIMENSIONS: (l x w x h) 50.3 in x 5.4 in x 3.8 in

Lithonia Lighting LED Wall Pack With Adjustable Lumen Output And Photocell

• Switchable Lumens (1,450 - 6,850 Lumens)
• 4000K Color Temperature
• 120-277 Volts
• Photocell
• Die Cast Aluminum Housing
• Ideal For Carports, Loading Areas, Driveways, And Parking Areas
• Wall Mounting
• 100,000 Hours
• Textured Dark Bronze Finish
• Mfg #TWX2 LED ALO 40K MVOLT PE DDBTXD
• Switchable Lumens (1,450 - 6,850 Lumens)
• 4000K Color Temperature
• 120-277 Volts
• Photocell

The Bronze Outdoor Integrated LED Square Wall Mount Flood Light from Lithonia Lighting is the energy-efficient, low-maintenance lighting solution for security lighting saving an estimated $710. incandescent fixtures over its life. This fixture produces an impressive 2017 Lumen of light output. The integrated LEDs are rated at 50,000 hours of operation, so no bulbs are necessary. That means you don't have to pull out the ladder to replace bulbs, it really lasts that long.

• Rugged cast-aluminum, corrosion-resistant rear housing and lamp heads thermally isolate the LED???s and driver promoting long life
• High-performance integrated LEDs produce over 2,000 Lumen and maintain 70% of light output at 50,000 hours of service
• 120 ft. x 70 ft. light coverage at 10 ft. mounting height
• Designed for wall or eave mounting to existing junction box (provided by others), mount 6-10 ft. high for optimum range and detection

Lithonia TWS LED Wall Pack 120-277V Dark Bronze

• (Al0) Adjustable Lumen Output (1,000 / 1,700 / 2,400)
• Switchable Color Temperatures (3000K, 4000K, 5000K)
• Replaces up to 100W Metal Halide/70W HPS, saves 80% energy
• Traditional form factor, and payback within two years
• Switchable on/off Photocell for dusk to dawn operation
• This fixture was designed to fit seamlessly — eliminating unwanted markings from the removal of older fixtures. Replace one or replace them all, either case, with energy savings of up to 80%, Lithonia has you covered.
• Mfg #TWS LEDALO SWW2 MVOLT PE DDBM2
• LED Wall
• Dark Bronze
• Pack 120-277v
• TWSLEDALO SWW2 MVOLT PE DDBM2

TWX LED wall-Pack family, a ground-up design that has the low initial cost customers demand while providing superior performance and a traditional form. The TWX1 LED is energy efficient saving up to 83% in energy costs when replacing a metal halide luminaire. The Adjustable Light Output (ALO) feature allows the contractor to set the light output during installation, to a level perfectly suited for the job site. The TWX1 LED ALO luminaires can replace anything from a CFL to 100-Watt metal halide luminaire.

• Adjustable light output maximizes flexibility in the field
• TWX1 LED is energy efficient saving up to 83% in energy costs when replacing a metal halide luminaire
• Hardwired on/off capability only
• CSA certified to US and Canadian standards, listed as a Design Lights Consortium (DLC) qualified product and IP65 rated for outdoor applications
• MVOLT driver operates on any line voltage from 120-Volt to 277-Volt (50 Hz/60 Hz) and can be mounted directly over a standard electrical junction box or back wiring can be connected and stored in the internal compartment
• Light engine(s) configurations consist of high-efficacy LEDs where the advanced optical design uses both reflector and refractor technologies that work together to create superior illumination and further throw, getting the light where it is needed
• Exterior painted parts are protected by a zinc-infused super durable TGIC thermoset powder coat finish providing superior resistance to corrosion and weathering withstanding extreme climate changes without cracking or peeling
• 5-year limited warranty

TWX LED wall-pack family, a ground-up design that has the low initial cost customers demand while providing superior performance and a traditional form. The TWX1 LED is energy efficient saving up to 83% in energy costs when replacing a metal halide luminaire. The TWX1 LED ALO luminaires can replace anything from a CFL to 100-Watt metal halide luminaire.

• Premium borosilicate glass lens works in conjunction with the high-efficiency light engine to provide superior illumination while minimizing wasted up-light
• TWX1 LED is energy efficient saving up to 83% in energy costs when replacing a metal halide luminaire
• CSA certified to US and Canadian standards, listed as a Design Lights Consortium (DLC) qualified product and IP65 rated for outdoor applications
• MVOLT driver operates on any line voltage from 120-Volt to 277-Volt (50 Hz/60 Hz) and can be mounted directly over a standard electrical junction box or back wiring can be connected and stored in the internal compartment
• Light engine(s) configurations consist of high-efficacy LEDs where the advanced optical design uses both Reflector and Refractor technologies that work together to create superior illumination and further throw, getting the light where it is needed
• Exterior painted parts are protected by a zinc-infused super durable TGIC thermoset powder coat finish providing superior resistance to corrosion and weathering withstanding extreme climate changes without cracking or peeling
• 5-year limited warranty

TWX LED wall pack family, a ground-up design that has the low initial cost customers demand while providing superior performance and a traditional form. The TWX2 LED is energy efficient saving up to 82% in energy costs when replacing a metal halide luminaire. The Adjustable Light Output (ALO) feature allows the contractor to set the light output during installation, to a level perfectly suited for the job site. The TWX2 LED ALO luminaires can replace anything from a 70-Watt to 250-Watt metal halide luminaire.

• Adjustable light output maximizes flexibility in the field
• TWX2 LED is energy efficient saving up to 82% in energy costs when replacing a metal halide luminaire
• Hardwired on/off capability only
• CSA certified to US and Canadian standards, listed as a DesignLights Consortium (DLC) qualified product and IP65 rated for outdoor applications
• MVOLT driver operates on any line voltage from 120-Volt to 277-Volt (50 Hz/60 Hz) and can be mounted directly over a standard electrical junction box or back wiring can be connected and stored in the internal compartment
• Light engine(s) configurations consist of high-efficacy LEDs where the advanced optical design uses both reflector and refractor technologies that work together to create superior illumination and further throw, getting the light where it is needed
• Exterior painted parts are protected by a zinc-infused super durable TGIC thermoset powder coat finish providing superior resistance to corrosion and weathering withstanding extreme climate changes without cracking or peeling
• 5-year limited warranty

The Commercial Grade Feit Electric S10WPK/850/DD/BZ Outdoor Integrated LED Square Wall pack Security Light merges timeless style with all the advantages of efficient LED technology. Wall or eave-mountable, this light illuminates doors, backyards, or parking areas with super-bright 1,450 lumens while using less than 21 watts. It features a contemporary design with a bronze finish that complements the exterior decor of any space. 5000K Daylight white light provides vivid light that reveals fine details. A built-in dusk to dawn photocell sensor allows automatic shut-off during daylight hours, adding to overall energy savings. The sturdy, rust proof aluminum construction and shatter resistant polycarbonate lens provides durability to ensure the long life of the fixture. This Outdoor Security LED light is ideal for residential and commercial applications such as entrances, patios, walkways, apartment complexes, parking lots, swimming pools, outlet exteriors, storage areas, common areas, parks and hotels. Energy saving integrated LEDs ensure maintenance free service for at least 50,000-hours. The dusk to dawn technology ensures there are no gaps in security during and turn off during the day.

• Color temperature: 5000K daylight gives off a bright amount of blue-white light, similar to that of daylight; best for display areas and work environments where very bright illumination is needed
• Power consumption: 20.7-Watt
• Brightness: 1450 Lumens
• Lamp life: 50,000-hours
• Built-in Dusk to dawn photocell sensor turns light on at dusk and off at dawn for convenience and energy savings
• 70-Watt high pressure sodium equivalent/100-Watt equivalent
• UV-protected, shatter resistant Polycarbonate lens
• ETL Listed
• Wet location rated
• ENERGY STAR
• Weather resistant cast aluminum housing
• Suitable for use in open-air decks and patios
• Bright long lasting LEDs are integrated into the fixture so there are no bulbs to replace

TWX LED wall-Pack family, a ground-up design that has the low initial cost customers demand while providing superior performance and a traditional form. The TWX1 LED is energy efficient saving up to 83% in energy costs when replacing a metal halide luminaire. The Adjustable Light Output (ALO) feature allows the contractor to set the light output during installation, to a level perfectly suited for the job site. The TWX1 LED ALO luminaires can replace anything from a CFL to 100-Watt metal halide luminaire.

• Adjustable light output maximizes flexibility in the field
• TWX1 LED is energy efficient saving up to 83% in energy costs when replacing a metal halide luminaire
• Hardwired on/off capability only
• CSA certified to US and Canadian standards, listed as a Design Lights Consortium (DLC) qualified product and IP65 rated for outdoor applications
• MVOLT driver operates on any line voltage from 120-Volt to 277-Volt (50 Hz/60 Hz) and can be mounted directly over a standard electrical junction box or back wiring can be connected and stored in the internal compartment
• Light engine(s) configurations consist of high-efficacy LEDs where the advanced optical design uses both reflector and refractor technologies that work together to create superior illumination and further throw, getting the light where it is needed
• Exterior painted parts are protected by a zinc-infused super durable TGIC thermoset powder coat finish providing superior resistance to corrosion and weathering withstanding extreme climate changes without cracking or peeling
• 5-year limited warranty

The Pro Series S15CWPK/850/BZ LED Wall Pack Security Light from Feit Electric is the ultimate security lighting solution. It keeps areas well-lit while saving maintenance time and energy costs. This powerful light can be used in both commercial and residential spaces. Illuminate large areas, parking lots, loading zones, or public spaces with super-bright 7700 lumens. Light up patios, walkways, swimming pools and apartment complexes using only 76 watts of electricity. The dusk-to-dawn feature turns your lights on at night and off during the day. Convenient and energy-saving. This durable light has a commercial-grade weather-proof aluminum housing and shatter-resistant polycarbonate lens. It'll withstand even the harshest conditions. Get this integrated LED flood light and get 50,000 hours without replacing a single bulb.

• Ultra-bright high lumen industrial lighting to keep work spaces well-lit and secure
• Lamp life: up to 50,000-hours
• Light output: 7700 Lumens
• 175-Watt metal halide equivalent/250-Watt high-pressure sodium equivalent/500-Watt incandescent equivalent
• Color temperature: 5000K daylight
• Power consumption: 76-Watt
• Shatter resistant polycarbonate lens provides enhanced durability
• UL Listed
• Rugged cast aluminum housing and wet location rated; lighting is suitable for outdoor locations
• Knockouts conduit entry
• Dusk to Dawn Technology turns your lights on at night, and off during the day automatically
• Long lasting Integrated LEDs save energy and maintenance costs over the life of the fixture

Lithonia Lighting CNY Adjustable Lumens, Switchable CCT Canopy Fixture, 120-347V. 3 Power Levels Deliver 5,000 - 10,000 Lumens. Switchable CCT (30K/40K/50K) offers warm, cool, and daylight in a single fixture. Integrated On/Off photocell. Integrated occupancy sensor can be turned on, off, or set to 10% dim. Install by surface mount, junction box, or pendant mount. IK08 Impact resistant polycarbonate frosted lens. IP65 rated, die cast aluminum housing. Mfg #CNY LED ALO SWW2 UVOLT PE PIR

• 3 Power Levels Deliver 5,000 - 10,000 Lumens.
• Switchable CCT (30K/40K/50K) offers warm, cool, and daylight in a single fixture
• Integrated On/Off photocell
• Integrated occupancy sensor can be turned on, off, or set to 10% dim

TWX LED wall-Pack family, a ground-up design that has the low initial cost customers demand while providing superior performance and a traditional form. The TWX3 LED is energy efficient saving up to 84% in energy costs when replacing a metal halide luminaire. The Adjustable Light Output (ALO) feature allows the contractor to set the light output during installation, to a level perfectly suited for the job site. The TWX3 LED ALO luminaires can replace anything from a 100-Watt to 400-Watt metal halide luminaire.

• Adjustable light output maximizes flexibility in the field
• TWX3 LED is energy efficient saving up to 84% in energy costs when replacing a metal halide luminaire
• Hardwired on/off capability only
• CSA certified to US and Canadian standards, listed as a Design Lights Consortium (DLC) qualified product and IP65 rated for outdoor applications
• MVOLT driver operates on any line voltage from 120-Volt to 277-Volt (50 Hz/60 Hz) and can be mounted directly over a standard electrical junction box or back wiring can be connected and stored in the internal compartment
• Light engine(s) configurations consist of high-efficacy LEDs where the advanced optical design uses both reflector and refractor technologies that work together to create superior illumination and further throw, getting the light where it is needed
• Exterior painted parts are protected by a zinc-infused super durable TGIC thermoset powder coat finish providing superior resistance to corrosion and weathering withstanding extreme climate changes without cracking or peeling
• 5-year limited warranty

TWX LED wall pack family, a ground-up design that has the low initial cost customers demand while providing superior performance and a traditional form. The TWX2 LED is energy efficient saving up to 82% in energy costs when replacing a metal halide luminaire. The Adjustable Light Output (ALO) feature allows the contractor to set the light output during installation, to a level perfectly suited for the job site. The TWX2 LED ALO luminaires can replace anything from a 70W to 250W metal halide luminaire.

• TECHNOLOGY: Adjustable light output maximizes flexibility in the field and allows you to dial in the lumens you need
• ENERGY SAVINGS: The TWX2 LED is energy efficient saving up to 82% in energy costs when replacing a metal halide luminaire
• CONTROLS: Hardwired on/off capability only
• RATINGS: CSA certified to US and Canadian standards, listed as a Design Lights Consortium (DLC) qualified product and IP65 rated for outdoor applications
• VOLTAGE: MVOLT driver operates on any line voltage from 120-277V (50/60Hz) and can be mounted directly over a standard electrical junction box or back wiring can be connected and stored in the internal compartment
• HOURS OF LIFE: Light engine(s) configurations consist of high-efficacy LEDs where the advanced optical design uses both reflector and refractor technologies that work together to create superior illumination and further throw
• FINISH: Exterior painted parts are protected by a zinc-infused Super Durable TGIC thermoset powder coat finish providing superior resistance to corrosion and weathering withstanding extreme climate changes without cracking or peeling
• WARRANTY: Five-year limited warranty
• DIMENSIONS: 4.5 in x 9 in x 13 in
• LUMENS: Adjustable Light Output to dial in the lumens needed
• OPTICS: Advanced optical design creates better illumination
• DESIGN: Low profile and covers footprint of typical HID wall pack

Outdoor Globe Fixture. 8 X 6 X 6.5". Black Lexan Housing. Opal Acrylic Globe. 120 Volts. 60 Watts. Use 60w Medium Base Bulb (Not Included). Use Hds# 320354 Replacement Globe. Mfg #F7006BWI

• 8 X 6 X 6.5"
• Black Lexan Housing
• Opal Acrylic Globe
• 120 Volts

TWX LED wall-Pack family, a ground-up design that has the low initial cost customers demand while providing superior performance and a traditional form. The TWX3 LED is energy efficient saving up to 84% in energy costs when replacing a metal halide luminaire. The Adjustable Light Output (ALO) feature allows the contractor to set the light output during installation, to a level perfectly suited for the job site. The TWX3 LED ALO luminaires can replace anything from a 100-Watt to 400-Watt metal halide luminaire.

• Adjustable light output maximizes flexibility in the field
• TWX3 LED is energy efficient saving up to 84% in energy costs when replacing a metal halide luminaire
• Hardwired on/off capability only
• CSA certified to US and Canadian standards, listed as a Design Lights Consortium (DLC) qualified product and IP65 rated for outdoor applications
• MVOLT driver operates on any line voltage from 120-Volt to 277-Volt (50 Hz/60 Hz) and can be mounted directly over a standard electrical junction box or back wiring can be connected and stored in the internal compartment
• Light engine(s) configurations consist of high-efficacy LEDs where the advanced optical design uses both reflector and refractor technologies that work together to create superior illumination and further throw, getting the light where it is needed
• Exterior painted parts are protected by a zinc-infused super durable TGIC thermoset powder coat finish providing superior resistance to corrosion and weathering withstanding extreme climate changes without cracking or peeling
• 5-year limited warranty

The ProLED WPS Wallpack Series provides the best value in the Commercial and Industrial Wallpack market to date. The WPS Series products are made of high quality, die-cast aluminum housings and a shatter resistant Borosilicate Glass Lens which offers a traditional, yet robust design. The traditional mounting design with 1/2 in. knock outs on sides makes installation a breeze.

• Brightness: 9797 Lumens
• Lifetime: 50,000-hours
• Color temperature: 4000K, 80 CRI cool white
• Energy used 80-Watt (equivalent to a 250-Watt metal halide bulb
• Ideal for use in factories, warehouses, self storage, commercial and industrial buildings
• Dimmable
• DLC Listed, title 24 compliant, UL Listed for wet locations
• 5-year warranty

Lithonia Lighting WPX family of LED wall packs are your best choice for your everyday wall mounted lighting needs. With three sizes and lumen packages of 1,550 to 9,200 lumens, the WPX family is a site-wide solution, replacing up to 400W metal halide wall packs. Since the WPX footprints are larger than that of typical metal halide glass wall packs, they fully cover unsightly stains, resulting in a neat application without the need for additional patch and repair. WPX delivers a wide photometric distribution that reduces the number of luminaires required while creating a well-illuminated and safer nighttime environment.

• DESIGN: The WPX LED wall packs are energy-efficient, cost effective, and aesthetically appealing solutions for both HID wall pack replacement and new construction opportunities
• ENERGY SAVINGS: Delivering 6,000 lumens at 47W make the WPX2 an energy efficient solution
• PHOTOCELL: Hardwired on/off capability only
• RATINGS: CSA certified to meet US and Canadian standards, suitable for wet locations, IP66 Rated and DesignLights Consortium (DLC) Premium qualified product
• VOLTAGE: MVOLT for 120-277V (50/60Hz)
• HOURS OF LIFE: Light engine(s) configurations consist of high-efficacy LEDs and LED lumen maintenance is L90/100,000 hours
• CONSTRUCTION: Die-cast aluminum main body with optimal thermal management that both enhances LED efficacy and extends component life and the luminaires are IP66 rated and sealed against moisture and environmental contaminants
• DESIGN: Geometric shape covers the footprint of a typical HID wall pack, covering any unsightly stains.
• WARRANTY: Five-year limited warranty
• DIMENSIONS: 12.3 in x 9.1 in x 4.1 in
• DISTRIBUTION: Wide, uniform photometric distribution
• INSTALLATION: Mounted over a standard electrical junction box
• KELVIN TEMPERATURE: 4000K

The ProLED WPS Wallpack Series provides the best value in the Commercial and Industrial Wallpack market to date. The WPS Series products are made of high quality, die-cast aluminum housings and a shatter resistant Borosilicate Glass Lens which offers a traditional, yet robust design. The traditional mounting design with 1/2 in. knock outs on sides makes installation a breeze.

• Brightness: 4948 Lumens
• Lifetime: 50,000-hours
• Color temperature: 5000K, 80CRI daylight
• Energy used 80-Watt (equivalent to a 175-Watt metal halide bulb)
• Ideal for use in factories, warehouses, self storage, commercial and industrial buildings
• Dimmable
• DLC Listed, title 24 compliant, UL Listed for wet locations
• 5-year warranty

ETI VersaFlood Light With Photocell, Small, 1900-4900 Lumens, Select CCT, Bronze. Pre-Installed 180degree Knuckle Mount For Optimal Head Vertical Adjustment And Trunnion Mount Included. Corrosion resistant, rugged die-cast aluminum housing with Bronze powder coat paint finish. Integrated heat sink maximizes product life and performance - Glass lens with internal white reflector for wide flood distribution. Sealed housing provides protection - IP65 Wet Rated. 1900-4900 Lumens of brightness. LUMEN BOOST LEVELS: 15 Watts, 25 Watts, 35 Watts. COLOR TEMPERATURE OPTIONS: 3000K Soft White, 4000K Bright White, 5000K Daylight. 0-10 Volt DIMMER SWITCH ONLY - Requires separate low-voltage wiring run - Suggested dimmers such as LUTRON: DVSTV-453PH-WH or DVELV-300PH-WH. Universal Voltage 120-277V. Photocell with enable disable standard. Product Dimensions with Knuckle Mount: 8.6in. H x 2.2in. W - Head Only: 5.2in. H x 7.2in. L - Total Weight: 2.73lbs. Operates in extreme sub-zero applications down to -40degree F up to 113degree F. Maintenance free with no bulbs to replace. Rated life up to 50,000 hours. Mfg #60219101

• Pre-Installed 180degree Knuckle Mount For Optimal Head Vertical Adjustment And Trunnion Mount Included
• Corrosion resistant, rugged die-cast aluminum housing with Bronze powder coat paint finish
• Integrated heat sink maximizes product life and performance - Glass lens with internal white reflector for wide flood distribution
• Sealed housing provides protection - IP65 Wet Rated

The ProLED WPS Wallpack Series provides the best value in the Commercial and Industrial Wallpack market to date. The WPS Series products are made of high quality, die-cast aluminum housings and a shatter resistant Borosilicate Glass Lens which offers a traditional, yet robust design. The traditional mounting design with 1/2 in. knock outs on sides makes installation a breeze.

• Brightness: 3514 Lumens
• Lifetime: 50,000-hours
• Color temperature: 4000K, 80CRI cool white
• Energy used 25-Watt (equivalent to a 100-Watt metal halide bulb)
• Ideal for use in factories, warehouses, self storage, commercial and industrial buildings
• Dimmable
• DLC Listed, title 24 compliant, UL Listed for wet locations
• 5-year warranty

Get powerful illumination for low energy costs with our Simply Conserve Integrated LED Wall Pack Light. This 15-watt lamp has the equivalent output of a 100-watt incandescent bulb for energy conservation. It's also a durable wall light fixture housed in tough polycarbonate thermoplastic with a polycarbonate lens as well. It's ETL rated to withstand wet weather so you get many seasons of reliable lighting. Overall, you get durable illumination that lasts for years, rain or shine.The unit is a sensible complement to existing outdoor security lighting and is also ideal for retrofitting or new construction. The lamp bathes the designated outdoor area with 1050 lumens of brightness, set at a cool white light color temperature. For even better energy management, this LED light fixture comes with a built-in photocell sensor for dusk-to-dawn outdoor lighting.Our exterior light fixture can be mounted on several areas or overhangs. It's easily installed on the outside of your building, apartment, or warehouse- wherever you require well-lit access. You get great outdoor light for patios, porches, garages, driveways, walkways, warehouses, parking lots, and more.

• 120 volt, 15-watt outdoor lighting product equivalent to 100-watt incandescent bulb alternative
• 1050-lumen dusk-to-dawn outdoor light fixture for energy cost savings
• 1050-lumen dusk-to-dawn outdoor light fixture rating for energy cost savings
• LED wall pack light rated for 35,000 hours of continuous use
• Ideal outdoor light for patios, garages, driveways, walkways, warehouses, parking lots and other building exterior light fixtures
• Get powerful illumination for low energy costs
• Model number: L15-MWP-40-120-PC

Satco 10" LED Field Canopy Fixture, 3 CCT Selectable, 45/60/70 Watt. Cct And Wattage Selectable. Ceiling Or Pendant Mounting. Hinged Universal Mounting Bracket. 6kv Surge Protection. Ip65 And Ik08 Vandal Resistant. Wet Location Rated. 50,000 Hour Functional Life. Mfg #65-981

• Cct And Wattage Selectable
• Ceiling Or Pendant Mounting
• Hinged Universal Mounting Bracket
• 6kv Surge Protection

The compact LED LitePak LNC is designed for entry/perimeter illumination with a type III light distribution. Typical mounting height is up to 12 ft. with 40 ft. fixture spacing. It has long-life LEDs at 60,000 hours, L96 rating.

• Die-cast aluminum housing with decorative styling
• Rugged design protects internal components and provides excellent thermal management
• Ambient diffuser included for applications near entrances or locations where reduced brightness is desired
• Dark bronze powder paint finish provides lasting appearance in outdoor environments
• Quick mount adapter provides quick installation
• Listed and labeled to UL 1598 for wet locations
• Design lights consortium qualified

ETI Modern Wallpack With Photocell, 12000-19600 Lumens, Select CCT, Bronze. 3 Lumen Boost Levels: 12,000-19,600 Lumens - (Low) 100-Watts (Medium) 120-Watts, (High) 140-Watts - Type 4 Light Distribution. COLOR TEMPERATURE OPTIONS: 3000K Soft White, 4000K Bright White, 5000K Daylight. Corrosion resistant, rugged die-cast aluminum housing with Bronze powder coat paint finish. Hinged housing allows for easy access to wiring, wattage and CCT select. Clear tempered textured glass provides diffused, uniform light quality. Dusk to Dawn Photocell w/ enable disable standard. Universal 120-277 Voltage. 0-10 Volt DIMMER SWITCH ONLY - Requires separate low-voltage wiring run - Suggested dimmers such as LUTRON: DVSTV-453PH-WH or DVELV-300PH-WH. PRODUCT DIMENSIONS: 12.8in. L x 17.8in. W x 4.5in. H - Weight: 8.2lbs. Operates reliably in extreme sub-zero applications down to -40degree F up to 122degree F. Maintenance free with no bulbs to replace. Rated life up to 60,000 hours. 5 year warranty. Mfg #61510101

• 3 Lumen Boost Levels: 12,000-19,600 Lumens - (Low) 100-Watts (Medium) 120-Watts, (High) 140-Watts - Type 4 Light Distribution
• COLOR TEMPERATURE OPTIONS: 3000K Soft White, 4000K Bright White, 5000K Daylight
• Corrosion resistant, rugged die-cast aluminum housing with Bronze powder coat paint finish
• Hinged housing allows for easy access to wiring, wattage and CCT select