The Siemens EQ 125 Amp 8-Space 16-Circuit Main Lug Outdoor Load Center is NEMA 3R rated for outdoor use and has a hinged door that can be removed by backing-out 1 screw. The load center features a 1-piece copper buss bar that offers excellent conductivity and is ideal for use where the environment can become severe, such as on farms and near coastal areas. Suitable for use as service equipment when a main breaker (125 Amp maximum) is back-fed in a branch position and used with main breaker retainer clip No.

• For use as a main lug load center
• Suitable for use as service entrance equipment when a main breaker is installed
• NEMA 3R rated for outdoor use
• G90 hot-dipped, galvanized-carbon-steel enclosure helps provide corrosion protection and has a hinged door that can be removed by backing out 1 screw
• Powder coating of polyester paint using electrostatic process enhances corrosion protection and gives a great-looking finish, free of drips and runs
• 1-piece copper buss bar is designed for use only with circuit breakers (not included) and offers excellent conductivity
• Single phase
• 3-wire
• 120/240 VAC
• 100,000 AIR
• Insta-wire for quick conductor installation
• Ideal for use where the environment can become severe, such as on farms and near coastal areas
• ANSI certified and UL listed
• Convertible from a main lug load center to a main breaker load center
• Interior offers removal in seconds
• Combination trim box in 1-package
• Positive load-side circuit-breaker hook rails
• Uses type HS hubs (not included)

For the distribution of electricity in your home, use this Siemens Industry, Inc. 125 Amp 8-Space 16-Circuit Indoor Main Lug Load Center. This load center offers a NEMA type-1 enclosure construction of galvanized carbon steel for protection against corrosion damage. This load center has a single-phase design and an aluminum bus bar.

• Galvanized carbon steel construction for corrosion resistance
• Aluminum bus bar
• NEMA type-1 enclosure designed for use in indoor installations
• Single-phase, 125 Amp, 120/240-Volt
• Meets UL and ANSI safety requirements

This 60 Amp 2-Space 4-Circuit Main Lug Load Center features an aluminum bus bar for excellent conductivity. It is designed for superb corrosion resistance thanks to a hot-dipped galvanized carbon steel box that features an electrostatic polyester powder-coat finish. For safety, this load center is both UL listed as well as ANSI certified.

• Type-G90, hot-dipped galvanized carbon steel enclosure provides corrosion protection
• Aluminum bus bar
• Interiors offer removal in seconds
• 1-piece bus bar construction designed for use with circuit breakers
• Positive load side circuit breaker hook rails
• Polyester powder-coat finish for enhanced corrosion resistance
• Ideal for sub-feed applications
• Surface mount

This Siemens EQ 60 Amp 2-Space 4-Circuit Outdoor Main Lug Load Center is suitable for use as service entrance equipment. This unit features a NEMA 3R-rated enclosure to help protect against rainfall and ice formation. The single-phase center has a G90 hot-dipped, galvanized-carbon-steel enclosure that provides corrosion protection with an additional powder-coat finish.

• G-90 hot-dipped galvanized carbon steel construction with a polyester-paint powder coating for corrosion protection
• NEMA 3R-rated enclosure helps protect against rainfall and ice formation
• G90 hot-dipped, galvanized-carbon-steel enclosure provides corrosion protection
• Tangential knockouts eliminate the need for conduit offset
• Copper buss bar is highly conductive
• Single phase
• 240-Volt
• Compatible with type QP, QPH and HQP circuit breakers (not included)
• ANSI certified and UL listed
• Will not accommodate a double-pole GFCI or a circuit breaker with a shunt trip

This 125 Amp 4-Space 8-Circuit Outdoor Main Lug Load Center is designed for all-weather use with a NEMA Type 3R rating. It is made of hot-dipped galvanized steel for rust resistance and has a polyester powder-coat finish for further protection from corrosion. EQ load centers with main lugs feature a combination trim box in one package.

• Type-G90, hot-dipped galvanized carbon steel enclosure provides corrosion protection
• Aluminum bus bar
• Interiors offer removal in seconds
• 1-piece bus bar construction designed for use with circuit breakers
• Positive load side circuit breaker hook rails
• Ideal for subfeed applications
• 100 Amp maximum breaker
• NEMA type 3R: enclosure is intended for outdoor use primarily to provide a of protection against falling rain and sleet and must remain undamaged by the formation or ice on the enclosure; they are not intended to provide protection against conditions such as dust, internal condensation or internal icing

The Siemens EQ 125 Amp 4-Space 8-Circuit Main Lug Indoor Load Center is single phase, 3 wire and rated for a maximum of 240-Volt and has a 100,000 Air. The center is NEMA Type 1 rated for indoor use. This product has a G90 hot-dipped, galvanized-carbon-steel enclosure that helps provide corrosion protection and an additional powder coating of polyester paint, using an electrostatic process, that enhances the corrosion protection and gives a great-looking finish, free of drips and runs.

• For use as a main lug load center
• NEMA type 1 rated for indoor use
• G90 hot-dipped, galvanized-carbon-steel enclosure helps provide corrosion protection
• Powder coating of polyester paint using electrostatic process enhances corrosion protection and gives a great-looking finish, free of drips and runs
• 1-piece aluminum buss bar is designed for use only with circuit breakers (not included)
• Single phase
• 3-wire
• 120/240 VAC
• 100,000 AIR
• ANSI certified and UL listed
• Surface mount
• Combination trim box in 1-package
• Positive load-side circuit-breaker hook rails
• Will not accommodate a double-pole GFCI or a circuit breaker with a shunt trip
• 100 Amp main breaker maximum (not included)

For use on load centers, 125 Amp and lower. This device will prevent dangerous feedback between two power sources. Easy assembly requiring no modifications to the load center or meter combo.

• Utility main breaker types include MBK100A or MBK125A standby main breaker types include QP, QPH or HQPH
• Suitable for use with optional standby systems in accordance with article 702 of the NEC
• Corrosion resistant finish
• UL listed for use in most Siemens load centers and meter combos