ROBERTS Superior Wall Base Adhesive is a superior grade, solvent free and zero Volatile Organic Compound (VOC) product with excellent holding power and great wet suction. This acrylic base formula is non-staining for easy cleanup, features a strong initial grab for fast installation and is odorless when dry. This adhesive meets the strict requirements of the South Coast Air Quality Management District and may contribute one LEED point as a low emitting adhesive.

• For the installation of vinyl, rubber and carpet wall base
• Bonds with porous wall surfaces such as gypsum drywall, plaster, brick, and concrete block
• Non-staining formula for easier cleanup
• Formulated for quick grab and rapid set-up for fast, easy installation
• Up to 10 minutes open time, up to 30 minutes working time and 24 to 48 hours curing time
• For a 4 in. wall base, coverage is approximately 50 to 60 linear feet per 30 ounces
• Install with a ROBERTS snozzle and caulking gun
• Enviro-friendly, solvent-free and LEED compliant; VOC 1 g/L, SCAQMD Rule 1168
• Protected by GoldGuard, an antimicrobial protection system that inhibits the growth of mold, mildew and odor causing bacteria in both wet and dry adhesives
• CRI Green Label Plus Certified - GLP no.71129
• 1 year limited warranty
• Not recommended for use in wet areas

ROBERTS 3095 High Performance Carpet Adhesive is formulated for the most demanding carpet installations. It secures most commercial carpet with rigid backings, including closed cell backings. The high solids, high tack formulation delivers a persistent bond. For interior use only, this adhesive has an extremely fast grab and is excellent for double-bond installation methods. Powered by Microban, this antimicrobial product protection helps fight the growth of stain and odor-causing bacteria that can cause product degradation.

• Commercial-grade, premium carpet adhesive for the most demanding carpet installations, and can be used for direct and double bond installations
• SBR Latex solvent-free adhesive offering high initial strength and an improved environmental footprint
• Bonds with cement, underlayment-grade plywood, vinyl composition tile free of wax, and terrazzo substrates
• Approximately 65 to 110 sq. ft. per gallon coverage for polypropylene/woven carpet and 100 to 200 sq. ft. per gallon coverage for non-woven/closed cell/enhancer carpet installations
• Moisture Control Adhesive - up to 10 lbs MVER and 90% RH, formulated with 70-73 % high solids content
• For indoor residential and commercial use, ready for use, does not require mixing
• Powered by Microban, antimicrobial product protection that helps fight the growth of stain and odor-causing bacteria that can cause product degradation
• Made in the USA
• Enviro-friendly, solvent-free and LEED compliant; VOC 1 g/L, SCAQMD Rule 1168

ROBERTS 6700 adhesive is formulated for installation of exterior and interior carpet, as well as artificial turf. It is a SBR latex, adhesive offering high initial strength and an improved environmental footprint. Powered by Microban, this antimicrobial product protection helps fight the growth of stain and odor-causing bacteria that can cause product degradation. ROBERTS 6700 can be used to adhere most indoor/outdoor carpets with polypropylene, rubber-backed (foam, marine, waffle), urethane and tufted, woven or non-woven/needle-bond backings. Made in the USA, this non-flammable adhesive can be used in areas where flammable adhesives pose a health risk due to fumes or flashback fires.

• For installation of most indoor/outdoor carpets, ideal for decks, sunrooms and basements
• SBR latex for high initial strength and an improved environmental footprint
• Compatible with most indoor/outdoor carpets with polypropylene, rubber-backed (foam, marine, waffle), urethane and tufted, woven or non-woven/needle-bond backings
• Covers up to 110 sq. ft. per gallon depending on trowel type, substrate, and installation conditions
• Moisture Control Adhesive - up to 5 lbs. MVER and 80% RH
• For indoor and outdoor residential, and commercial use
• Powered by Microban, antimicrobial product protection that helps fight the growth of stain and odor-causing bacteria that can cause product degradation
• Made in the USA

ROBERTS 6700 adhesive is formulated for installation of exterior and interior carpet, as well as artificial turf. It is a SBR latex, solvent-free adhesive offering high initial strength and an improved environmental footprint. Powered by Microban, this antimicrobial product protection helps fight the growth of stain and odor-causing bacteria that can cause product degradation. ROBERTS 6700 can be used to adhere most indoor/outdoor carpets with polypropylene, rubber-backed (foam, marine, waffle), urethane and tufted, woven or non-woven/needle-bond backings. Made in the USA, this non-flammable adhesive can be used in areas where flammable adhesives pose a health risk due to fumes or flashback fires.

• For installation of most indoor/outdoor carpets, ideal for decks, sunrooms and basements
• SBR latex for high initial strength and an improved environmental footprint
• Compatible with most indoor/outdoor carpets with polypropylene, rubber-backed (foam, marine, waffle), urethane and tufted, woven or non-woven/needle-bond backings
• Covers up to 110 sq. ft. per gallon depending on trowel type, substrate, and installation conditions
• Moisture Control Adhesive - up to 5 lbs. MVER and 80% RH
• For indoor and outdoor residential, and commercial use
• Powered by Microban, antimicrobial product protection that helps fight the growth of stain and odor-causing bacteria that can cause product degradation
• Made in the USA

ROBERTS 2001 is a superior, commercial-grade, felt-backed sheet vinyl adhesive developed with the optimum open time and working time for the positioning of felt-backed sheet vinyl flooring. It is formulated to bond with most concrete, APA-rated plywood, terrazzo, properly prepared vinyl composition tile (VCT), felt back sheet vinyl (non-cushioned) and primed gypcrete. Powered by Microban, this antimicrobial product protection helps fight the growth of stain and odor-causing bacteria that can cause product degradation. This adhesive covers up to 190 sq. ft. per gallon, depending on trowel type, substrate and installation conditions. It has an open time of up to 25 minutes, working time of up to 45 minutes, and a cure time of 24 Hours. It offers a 2-year shelf life from date of production when stored in original unopened container, and a lifetime warranty for installations performed by a Flooring Industry Association Certified Professional. This is an environmentally friendly, LEED compliant formulation; VOC less than 1 g/L.

• For installation of felt-backed sheet vinyl flooring
• SBR latex solvent-free adhesive with fast-setting formula to provide a long-lasting bond
• Bonds with most concrete, APA-rated plywood, terrazzo, properly prepared vinyl composition tile (VCT), felt back sheet vinyl (non-cushioned) and primed gypcrete
• Covers up to 190 sq. ft. per gallon, depending on trowel type, substrate, and installation conditions
• Moisture Control Adhesive with up to 5 lbs. MVER and 80% RH
• For interior installation only
• Powered by Microban antimicrobial product protection that helps fight the growth of stain and odor-causing bacteria that can cause product degradation
• Made in the USA