Lithonia Lighting CNY Adjustable Lumens, Switchable CCT Canopy Fixture, 120-347V. 3 Power Levels Deliver 5,000 - 10,000 Lumens. Switchable CCT (30K/40K/50K) offers warm, cool, and daylight in a single fixture. Integrated On/Off photocell. Integrated occupancy sensor can be turned on, off, or set to 10% dim. Install by surface mount, junction box, or pendant mount. IK08 Impact resistant polycarbonate frosted lens. IP65 rated, die cast aluminum housing. Mfg #CNY LED ALO SWW2 UVOLT PE PIR

• 3 Power Levels Deliver 5,000 - 10,000 Lumens.
• Switchable CCT (30K/40K/50K) offers warm, cool, and daylight in a single fixture
• Integrated On/Off photocell
• Integrated occupancy sensor can be turned on, off, or set to 10% dim

TWX LED wall pack family, a ground-up design that has the low initial cost customers demand while providing superior performance and a traditional form. The TWX2 LED is energy efficient saving up to 82% in energy costs when replacing a metal halide luminaire. The Adjustable Light Output (ALO) feature allows the contractor to set the light output during installation, to a level perfectly suited for the job site. The TWX2 LED ALO luminaires can replace anything from a 70W to 250W metal halide luminaire.

• TECHNOLOGY: Adjustable light output maximizes flexibility in the field and allows you to dial in the lumens you need
• ENERGY SAVINGS: The TWX2 LED is energy efficient saving up to 82% in energy costs when replacing a metal halide luminaire
• CONTROLS: Hardwired on/off capability only
• RATINGS: CSA certified to US and Canadian standards, listed as a Design Lights Consortium (DLC) qualified product and IP65 rated for outdoor applications
• VOLTAGE: MVOLT driver operates on any line voltage from 120-277V (50/60Hz) and can be mounted directly over a standard electrical junction box or back wiring can be connected and stored in the internal compartment
• HOURS OF LIFE: Light engine(s) configurations consist of high-efficacy LEDs where the advanced optical design uses both reflector and refractor technologies that work together to create superior illumination and further throw
• FINISH: Exterior painted parts are protected by a zinc-infused Super Durable TGIC thermoset powder coat finish providing superior resistance to corrosion and weathering withstanding extreme climate changes without cracking or peeling
• WARRANTY: Five-year limited warranty
• DIMENSIONS: 4.5 in x 9 in x 13 in
• LUMENS: Adjustable Light Output to dial in the lumens needed
• OPTICS: Advanced optical design creates better illumination
• DESIGN: Low profile and covers footprint of typical HID wall pack

The Lithonia Lighting 2-Lamp Outdoor Floodlight has a sturdy, weather-resistant cast-aluminum housing and twin adjustable heads. Ideal for walkways, patios, and play areas creating an inviting exterior space as well as providing safety and security. It has a white finish and is designed to connect easily to the junction box. Eave or wall-mount only.

• Weather-resistant aluminum housing and white finish
• Adjustable lamp heads for directional lighting
• Designed for ease of installation
• Uses 2 outdoor-rated, incandescent PAR lamps (sold separately)
• UL Listed
• Tool-free adjustable heads for up/down and side-to-side aiming which allows for light to be focused in two directions and is perfect for mounting on the corner of structures
• Designed for easy mounting to junction box

TWX LED wall-Pack family, a ground-up design that has the low initial cost customers demand while providing superior performance and a traditional form. The TWX1 LED is energy efficient saving up to 83% in energy costs when replacing a metal halide luminaire. The Adjustable Light Output (ALO) feature allows the contractor to set the light output during installation, to a level perfectly suited for the job site. The TWX1 LED ALO luminaires can replace anything from a CFL to 100-Watt metal halide luminaire.

• Adjustable light output maximizes flexibility in the field
• TWX1 LED is energy efficient saving up to 83% in energy costs when replacing a metal halide luminaire
• Hardwired on/off capability only
• CSA certified to US and Canadian standards, listed as a Design Lights Consortium (DLC) qualified product and IP65 rated for outdoor applications
• MVOLT driver operates on any line voltage from 120-Volt to 277-Volt (50 Hz/60 Hz) and can be mounted directly over a standard electrical junction box or back wiring can be connected and stored in the internal compartment
• Light engine(s) configurations consist of high-efficacy LEDs where the advanced optical design uses both reflector and refractor technologies that work together to create superior illumination and further throw, getting the light where it is needed
• Exterior painted parts are protected by a zinc-infused super durable TGIC thermoset powder coat finish providing superior resistance to corrosion and weathering withstanding extreme climate changes without cracking or peeling
• 5-year limited warranty

TWX LED wall pack family, a ground-up design that has the low initial cost customers demand while providing superior performance and a traditional form. The TWX2 LED is energy efficient saving up to 82% in energy costs when replacing a metal halide luminaire. The Adjustable Light Output (ALO) feature allows the contractor to set the light output during installation, to a level perfectly suited for the job site. The TWX2 LED ALO luminaires can replace anything from a 70-Watt to 250-Watt metal halide luminaire.

• Adjustable light output maximizes flexibility in the field
• TWX2 LED is energy efficient saving up to 82% in energy costs when replacing a metal halide luminaire
• Hardwired on/off capability only
• CSA certified to US and Canadian standards, listed as a DesignLights Consortium (DLC) qualified product and IP65 rated for outdoor applications
• MVOLT driver operates on any line voltage from 120-Volt to 277-Volt (50 Hz/60 Hz) and can be mounted directly over a standard electrical junction box or back wiring can be connected and stored in the internal compartment
• Light engine(s) configurations consist of high-efficacy LEDs where the advanced optical design uses both reflector and refractor technologies that work together to create superior illumination and further throw, getting the light where it is needed
• Exterior painted parts are protected by a zinc-infused super durable TGIC thermoset powder coat finish providing superior resistance to corrosion and weathering withstanding extreme climate changes without cracking or peeling
• 5-year limited warranty

TWX LED wall-Pack family, a ground-up design that has the low initial cost customers demand while providing superior performance and a traditional form. The TWX1 LED is energy efficient saving up to 83% in energy costs when replacing a metal halide luminaire. The Adjustable Light Output (ALO) feature allows the contractor to set the light output during installation, to a level perfectly suited for the job site. The TWX1 LED ALO luminaires can replace anything from a CFL to 100-Watt metal halide luminaire.

• Adjustable light output maximizes flexibility in the field
• TWX1 LED is energy efficient saving up to 83% in energy costs when replacing a metal halide luminaire
• Hardwired on/off capability only
• CSA certified to US and Canadian standards, listed as a Design Lights Consortium (DLC) qualified product and IP65 rated for outdoor applications
• MVOLT driver operates on any line voltage from 120-Volt to 277-Volt (50 Hz/60 Hz) and can be mounted directly over a standard electrical junction box or back wiring can be connected and stored in the internal compartment
• Light engine(s) configurations consist of high-efficacy LEDs where the advanced optical design uses both reflector and refractor technologies that work together to create superior illumination and further throw, getting the light where it is needed
• Exterior painted parts are protected by a zinc-infused super durable TGIC thermoset powder coat finish providing superior resistance to corrosion and weathering withstanding extreme climate changes without cracking or peeling
• 5-year limited warranty

The Lithonia Lighting ESXF LED floodlight is a general-purpose flood that offers awide selection of options and flexibility. Easy access to adjustable lumen output, colorswitching, and a selectable photocell turns the ESXF into the fixture you need on the spot.With its wide flood (7x7) distribution and DLC performance, the ESXF is a cost-effectivesolution, great for illuminating yards, driveways, signage, patios, warehouses, and securityapplications.

• Adjustable Lumen Output Delivers 1500/3000/ 5000 Lumens
• Replaces up to 150W HID Fixtures. Adjustable lumen output 9W/1500 Lumens, 19W/3,000 lumens, 34W/5000 Lumens
• Switchable Color Temperature 3000/4000/5000K
• Selectable Photocell Included Standard
• TWO (2) Mounting options included- Yoke & Slipfitter
• 120/277 Volt
• CI Code: 276ALH

The CSVT by Lithonia Lighting is built on the technological framework of the CSS, providing greater customization and performance for everyday spaces. And with the ability to switch lumens and adjust color temperature in one fixture, the CSVT can easily be adapted to the needs of each project - 9 different variations within the same SKU! The CSVT also comes with a 5-year limited warranty.

• TECHNOLOGY: Adjustable Lumen Output (ALO) and Switchable white (SWW) features allow for this strip light to offer 9 potential configurations within one fixture, using two switches
• Energy savings: high-Efficiency LEDs meet DLC Standard
• Dimming: 0-10V dimming standard
• RATINGS: CSA Certified to UL & C-UL Standards for wet location, IP65 and IP66 rated, NSF splash zone rated
• VOLTAGE: MVOLT (120-277V)
• HOURS OF LIFE: Greater than 70 percent LED lumen maintenance at 120,000 hours
• INSTALLATION: Surface (wall, ceiling) or suspended (chain, cable) using standard brackets
• WARRANTY: 5-year limited warranty
• DIMENSIONS: (l x w x h) 50.3 in x 5.4 in x 3.8 in

The Lithonia Lighting ESXF LED floodlight is a general-purpose flood that offers awide selection of options and flexibility. Easy access to adjustable lumen output, colorswitching, and a selectable photocell turns the ESXF into the fixture you need on the spot.With its wide flood (7x7) distribution and DLC performance, the ESXF is a cost-effectivesolution, great for illuminating yards, driveways, signage, patios, warehouses, and securityapplications.

• Adjustable Lumen Output Delivers 3500/5500/7500 Lumens
• Replaces up to 250W HID. Adjustable Lumen output 22W/3,500 Lumens, 37W/ 5,500 Lumens, 56W/ 7,500 Lumens
• Switchable Color Temperature 3000/4000/5000K
• Selectable Photocell Included Standard
• TWO (2) Mounting options included- Yoke & Slipfitter
• 120/277 Volt
• CI Code: 276ALU

TWX LED wall-Pack family, a ground-up design that has the low initial cost customers demand while providing superior performance and a traditional form. The TWX3 LED is energy efficient saving up to 84% in energy costs when replacing a metal halide luminaire. The Adjustable Light Output (ALO) feature allows the contractor to set the light output during installation, to a level perfectly suited for the job site. The TWX3 LED ALO luminaires can replace anything from a 100-Watt to 400-Watt metal halide luminaire.

• Adjustable light output maximizes flexibility in the field
• TWX3 LED is energy efficient saving up to 84% in energy costs when replacing a metal halide luminaire
• Hardwired on/off capability only
• CSA certified to US and Canadian standards, listed as a Design Lights Consortium (DLC) qualified product and IP65 rated for outdoor applications
• MVOLT driver operates on any line voltage from 120-Volt to 277-Volt (50 Hz/60 Hz) and can be mounted directly over a standard electrical junction box or back wiring can be connected and stored in the internal compartment
• Light engine(s) configurations consist of high-efficacy LEDs where the advanced optical design uses both reflector and refractor technologies that work together to create superior illumination and further throw, getting the light where it is needed
• Exterior painted parts are protected by a zinc-infused super durable TGIC thermoset powder coat finish providing superior resistance to corrosion and weathering withstanding extreme climate changes without cracking or peeling
• 5-year limited warranty

The outdoor bronze LED 4000K wall mount dusk-to-dawn flood light from Lithonia Lighting provides years of maintenance-free security lighting for residential and commercial applications such as yards, driveways, patios, loading areas and warehouses. The integrated LEDs are rated at 50,000-hours of operation. No bulbs are necessary. That means you don't have to pull out the ladder to replace bulbs, it really lasts that long.

• Energy efficient LED technology
• 4000K cool white color temperature
• Rugged cast aluminum, corrosion-resistant housing with dark bronze finish
• Dusk-to-dawn photocell turns the light on at night and off during the day
• Clear tempered glass lens is fully gasketed to protect LEDs and keep out moisture, dirt and insects
• 120-Volt LED driver
• Mounts easily to existing junction box on wall or under building eave

TWX LED wall-Pack family, a ground-up design that has the low initial cost customers demand while providing superior performance and a traditional form. The TWX3 LED is energy efficient saving up to 84% in energy costs when replacing a metal halide luminaire. The Adjustable Light Output (ALO) feature allows the contractor to set the light output during installation, to a level perfectly suited for the job site. The TWX3 LED ALO luminaires can replace anything from a 100-Watt to 400-Watt metal halide luminaire.

• Adjustable light output maximizes flexibility in the field
• TWX3 LED is energy efficient saving up to 84% in energy costs when replacing a metal halide luminaire
• Hardwired on/off capability only
• CSA certified to US and Canadian standards, listed as a Design Lights Consortium (DLC) qualified product and IP65 rated for outdoor applications
• MVOLT driver operates on any line voltage from 120-Volt to 277-Volt (50 Hz/60 Hz) and can be mounted directly over a standard electrical junction box or back wiring can be connected and stored in the internal compartment
• Light engine(s) configurations consist of high-efficacy LEDs where the advanced optical design uses both reflector and refractor technologies that work together to create superior illumination and further throw, getting the light where it is needed
• Exterior painted parts are protected by a zinc-infused super durable TGIC thermoset powder coat finish providing superior resistance to corrosion and weathering withstanding extreme climate changes without cracking or peeling
• 5-year limited warranty

TWX LED wall-pack family, a ground-up design that has the low initial cost customers demand while providing superior performance and a traditional form. The TWX1 LED is energy efficient saving up to 83% in energy costs when replacing a metal halide luminaire. The TWX1 LED ALO luminaires can replace anything from a CFL to 100-Watt metal halide luminaire.

• Premium borosilicate glass lens works in conjunction with the high-efficiency light engine to provide superior illumination while minimizing wasted up-light
• TWX1 LED is energy efficient saving up to 83% in energy costs when replacing a metal halide luminaire
• CSA certified to US and Canadian standards, listed as a Design Lights Consortium (DLC) qualified product and IP65 rated for outdoor applications
• MVOLT driver operates on any line voltage from 120-Volt to 277-Volt (50 Hz/60 Hz) and can be mounted directly over a standard electrical junction box or back wiring can be connected and stored in the internal compartment
• Light engine(s) configurations consist of high-efficacy LEDs where the advanced optical design uses both Reflector and Refractor technologies that work together to create superior illumination and further throw, getting the light where it is needed
• Exterior painted parts are protected by a zinc-infused super durable TGIC thermoset powder coat finish providing superior resistance to corrosion and weathering withstanding extreme climate changes without cracking or peeling
• 5-year limited warranty

The Bronze Outdoor Integrated LED Square Wall Mount Flood Light from Lithonia Lighting is the energy-efficient, low-maintenance lighting solution for security lighting saving an estimated $710. incandescent fixtures over its life. This fixture produces an impressive 2017 Lumen of light output. The integrated LEDs are rated at 50,000 hours of operation, so no bulbs are necessary. That means you don't have to pull out the ladder to replace bulbs, it really lasts that long.

• Rugged cast-aluminum, corrosion-resistant rear housing and lamp heads thermally isolate the LED???s and driver promoting long life
• High-performance integrated LEDs produce over 2,000 Lumen and maintain 70% of light output at 50,000 hours of service
• 120 ft. x 70 ft. light coverage at 10 ft. mounting height
• Designed for wall or eave mounting to existing junction box (provided by others), mount 6-10 ft. high for optimum range and detection

The CSVT Vapor Tight LED Strip Light by Lithonia Lighting is built on the technological framework of the CSS. The CSVT uses a tongue & groove, poured in gasket design, allowing for easy, on the go maintenance. The vapor tight fixture provides impressive ratings such as CSA wet location, IP65, IP66 for general washdown, and NEMA4X!

• TECHNOLOGY: Ideal for damp/wet locations such as outdoor venues, canopies and locker rooms. Not for use or installation in direct outdoor sunlight
• ENERGY SAVINGS: High Efficiency LEDs meet DLC Standard
• DIMMING: 0-10V Dimming standard
• RATINGS: CSA Certified to UL & C-UL Standards for wet location, IP65 and IP66 rated, NSF splash zone rated
• VOLTAGE: MVOLT (120-277V)
• HOURS OF LIFE: Greater than 70 percent LED lumen maintenance at 120,000 hours
• INSTALLATION: Surface (wall, ceiling) or suspended (chain, cable) using standard brackets
• WARRANTY: 5-year limited warranty
• DIMENSIONS: (l x w x h) 50.3 in x 5.4 in x 3.8 in

The Lithonia Lighting 2-Lamp Outdoor Flood Light has a sturdy, weather-resistant cast-aluminum housing and twin adjustable heads. It has a black-bronze finish and is designed to connect easily to the junction box. This flood light provides focused illumination for outdoor use in residential and light commercial applications and is ideal for walkways, patios and play areas creating an inviting exterior space as well as providing safety and security.

• Weather-resistant aluminum housing with black-bronze finish
• Adjustable lamp heads for directional lighting
• Designed for ease of installation
• Uses 2 outdoor-rated, incandescent PAR lamps (sold separately)
• UL listed
• Designed for easy mounting to junction box
• Tool-free adjustable heads for up/down and side-to-side aiming which allows for light to be focused in 2 directions and is perfect for mounting on the corner of structures

The HomeGuard LED family of security lights are long-lasting, energy-efficient solutions for replacing incandescent PAR lamp fixtures. Mounted on the wall or under the eaves, these luminaires provide reliable safety and security lighting in residential applications. HomeGuard LED security lights are available with the right feature sets for every application, making it a complete residential or commercial security lighting solution.

• DESIGN: easy to install and experience, the HGX floodlight family is the best choice for contractors and DIY customers with it's broad feature set for every application
• Energy saving: energy-efficient LEDs with adjustable lumen output of 1,750 or 2,750 lumen options
• Dimming: photocell (dusk-to-dawn) and adjustable lumen output (ALO)
• Ratings: UL/cUL listed to meet US and Canadian standards, suitable for wet locations, certified product
• Mounting: Mounts to a recessed junction box on wall or ceiling with crossbar and hardware provided; wet location listed for Mounting 4 feet above the ground with tool-less adjustable heads allow for precise aiming
• Hours of life: The HGX LED provides over 50,000 hours of maintenance free general illumination for outdoor applications where LEDs maintain 70% of light output
• Constrution: cast-aluminum housing with drak bronze polyester powder paint for lasting durability; LED lamp heads thermally isolated from driver, promoting a long service life; lenses are sealed to prolong service life
• Battery: no emergency battery back-up available in this version
• Warranty: five-year limited warranty
• Dimensions: 7.56 in x 4.33 in x 4.53 in
• Modern design for replacement or new construction applications
• User-friendly controls
• Integrated visors: visually pleasing illumination, minimal glare
• Security light, flood light, resisdential, commercial, safety, low cost, contractors, DIY, family

The HomeGuard LED family of security lights are long-lasting, energy-efficient solutions for replacing incandescent PAR lamp fixtures. Mounted on the wall or under the eaves, these luminaires provide reliable safety and security lighting in residential applications. HomeGuard LED security lights are available with the right feature sets for every application, making it a complete residential or commercial security lighting solution.

• DESIGN: easy to install and experience, the HGX floodlight family is the best choice for contractors and DIY customers with it's broad feature set for every application
• Energy saving: energy-efficient LEDs with 2,750 lumen output
• Dimming: hardwired on/off capability only
• Ratings: UL/cUL listed to meet US and canadian standards, suitable for wet locations, certified product
• Mounting: Mounts to a recessed junction box on wall or ceiling with crossbar and hardware provided; wet location listed for Mounting 4 feet above the ground with tool-less adjustable heads allow for precise aiming
• Hours of life: The HGX LED provides over 50,000 hours of maintenance free general illumination for outdoor applications where LEDs maintain 70% of light output
• Constrution: cast-aluminum housing with drak bronze polyester powder paint for lasting durability; LED lamp heads thermally isolated from driver, promoting a long service life; lenses are sealed to prolong service life
• Battery: no emergency battery back-up available in this version
• Warranty: five-year limited warranty
• Dimensions: 7.56 in x 4.25 in x 4.41 in
• Modern design for replacement or new construction applications
• Easy, toll-less aiming heads
• Integrated visors: visually pleasing illumination, minimal glare
• Security light, flood light, resisdential, commercial, safety, low cost, contractors, DIY, family

The HomeGuard LED family of security lights are long-lasting, energy-efficient solutions for replacing incandescent PAR lamp fixtures. Mounted on the wall or under the eaves, these luminaires provide reliable safety and security lighting in residential applications. HomeGuard LED security lights are available with the right feature sets for every application, making it a complete residential or commercial security lighting solution.

• Design: easy to install and experience, the Lithonia Lighting HGX floodlight family is the best choice for contractors and DIY customers with it's broad feature set for every application
• Energy savings: energy-efficient LEDs with Lumens output of 2,750 Lumens
• Ratings: UL/cUL Listed to meet US and canadian standards, suitable for wet locations, ENERGY STAR certified product
• Mounting: mounts to a recessed junction box on wall or ceiling with crossbar and hardware provided, wet location Listed for mounting 4 ft. above the ground with tool-less adjustable heads allow for precise aiming
• Hours of life: the HGX LED provides over 50,000-hours of maintenance free general illumination for outdoor applications where LEDs maintain 70% of light output
• Construction: cast-aluminum housing with dark bronze polyester powder paint for lasting durability, LED lamp heads thermally isolated from driver, promoting a long service life, sealed lenses prolong service life
• Waarranty: 5-year limited warranty
• Dimensions: 7.56 in. x 6.14 in. x 4.41 in.

The TFX2 LED flood luminaire is a cost-effective, energy-efficient, long-life solution for replacing metal halide or HPS floodlights. Delivering 13,200 Lumens, the TFX2 can replace up to 250-Watt metal halide while saving 74% in energy costs. Reliable IP66 construction and excellent LED lumen maintenance will ensure a long service life, avoiding the multiple lamp changes of the metal halide luminaires they replace. The TFX2 is available with 3/4 threaded knuckle and yoke mounting options.

• TFX LED flood luminaire is a cost-effective, energy-efficient, long-life solution for replacing metal halide or HPS floodlights
• Delivering 13,200 Lumens, the TFX2 can replace up to 250-Watt metal halide while saving up to 85% in energy costs
• Replaces 250-Watt metal halide, saves up to 85% energy
• Cost effective and energy efficient, payback within 1-year
• Adjustable slip fitter - easy to mount on any 2-3/8 in. O.D. tenon
• Color temperature (CCT) is 4000K with minimum CRI of 70
• Die-cast aluminum main body with optimal thermal management that both enhances LED efficacy and extends component life, the light engines and housing are IP66 rated and sealed against moisture or environmental contaminants
• UL certified, suitable for wet locations, IP66 rated
• 5-year limited warranty

The TFX4 LED flood luminaire is a cost-effective, energy-efficient, long-life solution for replacing metal halide or HPS floodlights. Delivering 41,000 Lumens, the TFX4 can replace up to 1000-Watt metal halide while saving 74% in energy costs. Reliable IP66 construction and excellent LED lumen maintenance will ensure a long service life, avoiding the multiple lamp changes of the metal halide luminaires they replace. The TFX4 is available with 3/4 threaded knuckle and yoke mounting options.

• TFX LED flood luminaire is a cost-effective, energy-efficient, long-life solution for replacing metal halide or HPS floodlights
• Delivering 41,000 Lumens, the TFX3 can replace up to 400-Watt metal halide while saving over 60% in energy costs
• Replaces 1000-Watt metal halide, saves up to 85% energy
• Cost effective and energy efficient, payback within 1-year
• Adjustable slip fitter - easy to mount on any 2-3/8 in. O.D. tenon
• Color temperature (CCT) is 4000K with minimum CRI of 70
• Die-cast aluminum main body with optimal thermal management that both enhances LED efficacy and extends component life, the light engines and housing are IP66 rated and sealed against moisture or environmental contaminants
• UL certified, suitable for wet locations, IP66 rated
• 5-year limited warranty

Lithonia Lighting Canopy Fixture, Adjustable Lumens, Switchable CCT, White The Lithonia Lighting Cny Led Alo Canopy Luminaire Is A Versatile, Energy-Efficient Solution For Surface-Mount Applications For Walkways, Overhangs, And Parking Garages Adjustable switch panel easily changes lumen output, color temperature, integrated photocell, and integrated motion sensor. The low profile frosted lens creates a visually comfortable illumination and even distribution. 3 power levels deliver 5,000 - 10,000 lumens. Switchable CCT (30K/40K/50K) offers warm, cool, and daylight in a single fixture Integrated On/Off photocell Integrated occupancy sensor can be turned on, off, or set to 10% dim Install by surface mount, junction box, or pendant mount IK08 Impact resistant polycarbonate frosted lens IP65 rated, die cast aluminum housing Mfg #CNY LED ALO SWW2 UVOLT PE PIR

• The Lithonia Lighting Cny Led Alo Canopy Luminaire Is A Versatile, Energy-Efficient Solution For Surface-Mount Applications For Walkways, Overhangs, And Parking Garages
• Adjustable switch panel easily changes lumen output, color temperature, integrated photocell, and integrated motion sensor. The low profile frosted lens creates a visually comfortable illumination and even distribution.
• 3 power levels deliver 5,000 - 10,000 lumens.
• Switchable CCT (30K/40K/50K) offers warm, cool, and daylight in a single fixture

The HomeGuard LED family of security lights are long-lasting, energy-efficient solutions for replacing incandescent PAR lamp fixtures. Mounted on the wall or under the eaves, these luminaires provide reliable safety and security lighting in residential applications. HomeGuard LED security lights are available with the right feature sets for every application, making it a complete residential or commercial security lighting solution.

• DESIGN: easy to install and experience, the HGX floodlight family is the best choice for contractors and DIY customers with it's broad feature set for every application
• Energy saving: energy-efficient LEDs with adjustable lumen output of 1,800 or 2,750 lumen options
• Dimming: photocell (dusk-to-dawn), Adjustable Lumen Output (ALO) and Switchable Color Temperature (CCT)
• Ratings: UL/cUL listed to meet US and Canadian standards, suitable for wet locations, certified product
• Mounting: Mounts to a recessed junction box on wall or ceiling with crossbar and hardware provided; wet location listed for Mounting 4 feet above the ground with tool-less adjustable heads allow for precise aiming
• Hours of life: The HGX LED provides over 50,000 hours of maintenance free general illumination for outdoor applications where LEDs maintain 70% of light output
• Constrution: cast-aluminum housing with drak bronze polyester powder paint for lasting durability; LED lamp heads thermally isolated from driver, promoting a long service life; lenses are sealed to prolong service life
• Battery: no emergency battery back-up available in this version
• Warranty: five-year limited warranty
• Dimensions: 7.56 in x 4.33 in x 4.53 in
• Modern design for replacement or new construction applications
• User-friendly controls
• Integrated visors: visually pleasing illumination, minimal glare
• Security light, flood light, residential, commercial, safety, low cost, contractors, DIY, family

Lithonia Lighting WPX family of LED wall packs are your best choice for your everyday wall mounted lighting needs. With three sizes and lumen packages of 1,550 to 9,200 lumens, the WPX family is a site-wide solution, replacing up to 400W metal halide wall packs. Since the WPX footprints are larger than that of typical metal halide glass wall packs, they fully cover unsightly stains, resulting in a neat application without the need for additional patch and repair. WPX delivers a wide photometric distribution that reduces the number of luminaires required while creating a well-illuminated and safer nighttime environment.

• DESIGN: The WPX LED wall packs are energy-efficient, cost effective, and aesthetically appealing solutions for both HID wall pack replacement and new construction opportunities
• ENERGY SAVINGS: Delivering 6,000 lumens at 47W make the WPX2 an energy efficient solution
• PHOTOCELL: Hardwired on/off capability only
• RATINGS: CSA certified to meet US and Canadian standards, suitable for wet locations, IP66 Rated and DesignLights Consortium (DLC) Premium qualified product
• VOLTAGE: MVOLT for 120-277V (50/60Hz)
• HOURS OF LIFE: Light engine(s) configurations consist of high-efficacy LEDs and LED lumen maintenance is L90/100,000 hours
• CONSTRUCTION: Die-cast aluminum main body with optimal thermal management that both enhances LED efficacy and extends component life and the luminaires are IP66 rated and sealed against moisture and environmental contaminants
• DESIGN: Geometric shape covers the footprint of a typical HID wall pack, covering any unsightly stains.
• WARRANTY: Five-year limited warranty
• DIMENSIONS: 12.3 in x 9.1 in x 4.1 in
• DISTRIBUTION: Wide, uniform photometric distribution
• INSTALLATION: Mounted over a standard electrical junction box
• KELVIN TEMPERATURE: 4000K