Designed for Use on Built-up Shower Bases. Durable PVC White. Fits over 2 in. or Inside of 3 in. Sch. 40 DWV Pipe. Screw-in Round Stainless Steel Strainer.

• Bolt-down shower drain
• White PVC
• Fits inside of 3 in. Sch. 40 DWV pipe
• Fits over 2 in. Sch. 40 DWV pipe
• cUPC approval
• Round

Stainless Steel Snap-on Strainer. Durable PVC white. Solvent Weld over 2 in. Sch.40 DWV Pipe.

• Stainless steel
• Snap-on strainer
• PVC
• White
• cUPC approval
• 4-1/2 in.

Stainless Steel Snap-In Strainer. PNC Plastic. No-Caulk Shower Dra in. ABS White Available. Fits Over 2 in. Sch.40 DWV Pipe. Includes Wrench.

• Stainless steel
• Snap-in
• No-caulk
• ABS
• White
• cUPC approval

Oatey 102 Series Solvent Weld Shower Drain With Receptor Base is for use with preformed shower stall bases. The drain receptor base integrates the body locknut, which allows for easier installation. Install the complete assembly to the shower base first and solvent weld assembly into place as base is set; or, solvent weld the receptor, set the shower base and then thread the barrel in from the top. The drain top accommodates Oatey 4-1/4 in. Universal Snap-Tite Strainers. Oatey products have earned the trust of plumbing professionals for over 100 years.

• PVC shower drain with receptor base
• Drain for use with preformed shower stall bases
• Includes universal 4-1/4 in. round snap-tite stainless steel strainer
• Solvent weld over 2 in. PVC DWV pipe
• Ideal for slab construction
• Fiber and rubber washer provides drain body with airtight seal to the shower base
• 2 in. PVC Schedule 40 DWV pipe is secured with a mechanically compressed gasket that does not require caulking
• Includes drain tightening wrench for easy installation
• Included drain cover helps keep drain clear of unwanted items to keep it flowing freely with fewer clogs
• Strainer snaps onto the drain body after installation
• Drain top also accommodates Oatey 4-1/4 in. Universal Snap-Tite Strainers, available in a variety of designer finishes (not included)

Hercules Plumbers Caulk is a commercial-grade, easy-to-use, single component, non-sag, siliconized acrylic-latex caulk. It forms a flexible, durable and UV-resistant waterproof seal on interior and exterior surfaces. Behold the power of Hercules, products built to last and trusted by plumbers to withstand even the toughest conditions.

• Siliconized acrylic-latex plumber's caulk
• Flows easily and does not harden in tube or cartridge
• Will not crumble
• Resists shrinkage
• Extremely mildew-resistant
• Applies white, dries crystal clear

2 Piece Solvent Weld Shower Dra in. PVC material in White. Solvent Weld Over 2 in. schedule 40 DWV pipe. Screw-in Stainless Steel Strainer. Has cUPC approval.

• 2 in. x 2 in.
• PVC
• White
• cUPC approval
• 2 piece
• SS strainer

Designed For Molded Shower Stalls

• The Drain Is Installed On The Shower Unit Before It Is Placed
• Stainless Steel Snap-In Strainer
• Compression Gasket
• Reference #140Nc
• Fits 2" Schedule 40 Plastic Or 2" Cast Iron Pipe

The product is high quality and reliability and durability. The product is easy to use and attractive styling. The product is wide selection of product choices and great value.

• Polished stainless steel
• Diameter: 4 in. fits: 3 in. drain
• 1 pc per bag
• Friendly use
• Superior quality
• Easy installment

The product is high quality and reliability and durability. The product is easy to use and attractive styling. The product is wide selection of product choices and great value.

• Chrome plated zinc body
• With stainless steel grid
• 1 1/2 in.
• Friendly use
• Superior quality
• Easy installment

AB&A bath drains are offered in an assortment of styles and special finishes to complement todays shower designs and customer preferences. Recognized for consistent high quality and easy installation, AB&A shower drain products are used in both new construction and retrofit applications. AB&A Drains are both functional and versatile.

• Drain for residential showers with tile flooring
• Available in a variety of styles to match your bathroom decor
• Versatile, interchangeable shower grate design lets you choose the type that fits your needs
• Test kit allows the drain system to be pressure tested for safety
• Pick from chrome, oil rubbed bronze, venetian bronze and satin nickel finishes
• PVC

Hercules Plumbers Caulk is a commercial-grade, easy-to-use, single component, non-sag, siliconized acrylic-latex caulk. It forms a flexible, durable and UV-resistant waterproof seal on interior and exterior surfaces. Behold the power of Hercules, products built to last and trusted by plumbers to withstand even the toughest conditions.

• Siliconized acrylic-latex plumber's caulk
• Flows easily and does not harden in tube or cartridge
• Will not crumble
• Resists shrinkage
• Extremely mildew-resistant
• Applies white, dries crystal clear

General purpose drain. PVS white. Solvent weld connection. Screw-in Brass/Chrome-Plated Strainer.

• Drain
• PVC
• White
• cUPC approval
• Solvent weld connection
• Brass/CP

The product is high quality and reliability and durability. The product is easy to use and attractive styling. The product is wide selection of product choices and great value.

• Polished stainless steel
• Diameter: 3 in.
• Fits: 2 in. drain
• Friendly use
• Superior quality
• Easy installment

Oatey Universal 4-1/4 in. Snap-Tite Designer Finish Strainers are designed to provide a decorative finish to residential shower drains with any 4-1/4 In round drain top. Snap-Tite strainers coordinate with most popular faucet finishes and give you the flexibility to match many finishes without replacing the entire drain assembly. They easily snap-in and can be quickly removed if drain cleaning is required. Oatey products have earned the trust of plumbing professionals for over 100 years.

• Universal replacement strainer
• Designed for use with a 2 in. or 3 in. drain opening
• Able to be used with any 4-1/4 in. round drain top
• Made of stainless steel that will not corrode
• Brushed nickel finish creates a long-lasting surface that holds up against household chemicals
• Coordinates with the most popular faucet finishes to complement any glamour bathroom suite
• Replacement strainer helps keep drain clear of unwanted items to keep it flowing freely with fewer clogs
• Snaps onto no-caulk, tile shower, offset, solvent weld, brass NPT and two-part shower drain bodies for easy installation
• Can be removed easily if shower drain requires cleaning
• 4-1/4 in. diameter
• Compatible with Oatey 101BR, 101PNC, 101NPT, 101PS, 102, 103, 130, 131 and 140 NC Series Shower Drains

The product is high quality and reliability and durability. The product is easy to use and attractive styling. The product is wide selection of product choices and great value.

• Chrome plated zinc body
• With stainless steel grid
• 2 in.
• Friendly use
• Superior quality
• Easy installment

From finishes that are guaranteed to last a lifetime, to faucets that perfectly balance your water pressure, MOEN sets the standard for exceptional beauty and reliable, innovative design. This grid strainer was built to last by MOEN. Designed for use in your commercial bath.

• Mirror-like chrome finish
• 5 year limited warranty
• Chrome plated brass
• Grid strainer type
• Works with MOEN faucets
• Warranted for 5 years against material or manufacturing defects

The Oatey 130 Series PVC Low-Profile Shower Drain with Stainless Steel Strainer is designed for use with tile or marble shower bases where a shower pan liner membrane is required. The low profile design allows for installation in tight spaces. The drain body solvent welds over 2 in. or inside 3 in. Schedule 40 DWV pipe. The reversible clamping collar is secured with four stainless steel bolts into brass inserts. The 2 in. IPS-threaded strainer barrel is adjustable to allow for easy height adjustment. Weep holes in the drain assembly allow drainage from the pan liner. Drain barrel includes 4-1/4 in. Dia stainless steel strainer. Oatey products have earned the trust of plumbing professionals for over 100 years.

• Shower floor drain made with durable PVC plastic construction
• Drain for use with built-up tile or marble shower bases
• Includes universal 4-1/4 in. square snap-tite stainless steel strainer
• Drain body is secured to drain pipe with PVC solvent cement
• Drain body solvent welds over 2 in. or inside 3 in. PVC Schedule 40 DWV pipe
• Low-profile design allows for installation in tight spaces
• Reversible clamping collar is secured with 4 stainless steel bolts into brass inserts to prevent stripping
• 2 In. IPS-threaded strainer barrel is adjustable to allow for easy height adjustment
• Weep holes in the drain assembly allow drainage from the pan liner
• For use in shower pan liner applications
• Strainer snaps onto the drain body after installation
• Drain top also accommodates Oatey 4-1/4 in. Universal Snap-Tite Strainers, available in a variety of designer finishes (not included)

Oatey Four-Way Area Drains are designed for use in garages, patios or utility rooms. A removable plastic screw-in strainer is also included. Oatey products have earned the trust of plumbing professionals for over 100 years.

• PVC drain with round screw-in drain cover
• Ideal for use with garage, patio and other drains
• Allows for quick and easy installation
• Solvent welds over 2 in. Schedule 40 DWV pipe or inside of 3 in. PVC Schedule 40 DWV pipe
• Comes with removable plastic screw-in strainer
• Compatible in most applications
• Easy to install
• Designed for garages, patios and utility rooms
• Comes with 2 screws
• Made of high-impact PVC construction

The product is high quality and reliability and durability. The product is easy to use and attractive styling. The product is wide selection of product choices and great value.

• Polished stainless steel
• Diameter: 5 in.
• Fits: 4 in. drain
• Friendly use
• Superior quality
• Easy installment

The Oatey 140 Series / 101 PNC Series No-Caulk Round PVC Shower Drain with Stainless Steel Strainer mechanically attaches over 2 in. Schedule 40 DWV pipe, no caulking required. Designed for use with preformed shower bases, this drain comes with a universal 4-1/4 in. round snap-in strainer in a stainless steel finish that complements your existing bathroom decor. Oatey products have earned the trust of plumbing professionals for over 100 years.

• White PVC shower drain
• Drain for use with preformed shower stall bases
• Includes universal 4-1/4 in. round snap-tite stainless steel strainer
• Mechanically attaches over 2 in. PVC Schedule 40 DWV pipe, no caulking required with compression gasket
• Ideal for slab construction
• Friction gasket ensures a secure, watertight seal around shower drain
• Included drain cover helps keep drain clear of unwanted items to keep it flowing freely with fewer clogs
• Strainer snaps onto the drain body after installation
• Drain top also accommodates Oatey 4-1/4 in. Universal Snap-Tite Strainers, available in a variety of designer finishes (not included)

The Oatey 130 Series PVC Low-Profile Shower Drain with Square Chrome-Plated Square Hole Strainer is designed for use with tile or marble shower bases where a shower pan liner membrane is required. The low profile design allows for installation in tight spaces. The drain body solvent welds over 2 in. or inside 3 in. Schedule 40 DWV pipe. The reversible clamping collar is secured with four stainless steel bolts into brass inserts. The 2 in. IPS-threaded strainer barrel is adjustable to allow for easy height adjustment. Weep holes in the drain assembly allow drainage from the pan liner. Drain barrel includes 4-1/4 in. Dia chrome-plated screw-in strainer. Oatey products have earned the trust of plumbing professionals for over 100 years.

• Shower floor drain made with durable PVC plastic construction
• Drain for use with built-up tile or marble shower bases
• Includes 3.89 in. square screw-in chrome-plated strainer
• Drain body is secured to drain pipe with PVC solvent cement
• Drain body solvent welds over 2 in. or inside 3 in. PVC Schedule 40 DWV pipe
• Low-profile design allows for installation in tight spaces
• Reversible clamping collar is secured with 4 stainless steel bolts into brass inserts to prevent stripping
• 2 In. IPS-threaded strainer barrel is adjustable to allow for easy height adjustment
• Weep holes in the drain assembly allow drainage from the pan liner
• For use in shower pan liner applications
• Strainer screws into the drain body after installation

Add functional elegance to your shower with the Oatey Designline Shower Drain. The centerpoint drain is engineered to achieve the best fit, form and function in a tile shower. Its design allows for micro-adjusting the drain height without rotation to meet the pitch of the finished floor. The 2 in. outlet adaptor with an O-ring allows attaches to standard drain outlets. The drain is compatible with both PVC and CPE waterproofing liners. With a sloped drain body, you can be sure that water consistently flows to the drain outlet. The included debris basket serves as a shower drain hair catcher to protect against clogs and is easily accessible by removing the drain cover with the lifting key. Waterproofing, bonding adhesive and drain base are sold separately. Oatey products have earned the trust of plumbing professionals for over 100 - years.

• 6 in. x 6 in. square drain
• Square grate pattern in stainless steel finish
• Made of durable, corrosion-resistant stainless steel
• Sloped drain body ensures proper drainage
• Lifting key provided for easy removal of drain cover for cleaning and maintenance
• Adapter allows for quick and easy height adjustment during installation
• Debris basket captures hair to protect against clogs and features sound-dampening band to help reduce rattle
• Includes 2 in. threaded outlet adaptor with O-ring that seals to drain outlet
• Quick and easy assembly
• Waterproofing, bonding adhesive, and drain base sold separately

Protect the quality of your SAYCO products by always looking for SAYCO Genuine Replacement Parts. SAYCO Genuine Replacement Parts are designed to maintain original product performance and promote product durability. Made with premium materials to ensure longevity. All PVC Construction, Adjustable To Fit 14 in. - 16 in. Tubs. Easy Installation. Inside Dimensions - 19-7/8 in. x 8 in. Outside Dimensions 21 in. x 9 in.

• All PVC construction
• Adjustable to fit 14 in. 16 in. tubs
• Easy installation
• Inside dimensions - 19-7/8 in. x 8 in.
• Outside dimensions - 21 in. x 9 in.
• Chrome finish

Whether you want to update and add a new style to your bath or simply replace an older tub spout that no longer works, replacing a bathtub spout is a pretty simple DIY project. This Danco tub spout with diverter has a classic style and will fit 4 in. threaded stub out connections. It features a corrosion resistant zinc metal construction that provides durability and reliability. The chrome finish gives your bathtub a new fresh look. This spout is compatible with most faucet brands and is easy to install with common household tools and pipe thread tape.

• Ideal for replacing and updating your worn-out, non-functioning tub spout and has a universal design that ONLY FITS A THREADED PIPE connection; it DOES NOT FIT a copper pipe slip-fit connection
• Has ½ in. IPS inside threads and will fit a 4 in. stub out from tiled wall
• Includes a front diverter lift rod to allow water stream to flow downward into the tub or upward into showerhead
• Bathtub faucet spout has a 5 in. reach
• Durable metal construction provides strength, longevity and will endure the rigors of everyday use
• Metal threads measures 3-3/4 inch to threads from back of tub spout, so it is IMPORTANT to measure your stub out nipple to ensure it is at least 4 in. long
• You will need adjustable pliers and plumber sealing tape to help prevent leaks and provide a better seal during installation
• Chrome finish resists corrosion and tarnishing and will complement your existing bathroom fixtures