Searched for "40141725"
Designed so that the maximum number of support and framing applications can be constructed with a minimum amount of labor and pieces. Channel is made of 14 Gauge, 1-5/8 in. x 13/16 in., by 10 ft. Half Slot Steel with 9/16 in. x 1-1/8 in. Slots on 2 in. Centers.
- 10 ft.
- 14-Gauge
- Slots on 2 in. centers
- Gold
- 1-5/8 in. x 13/16 in.
- Corrosion resistant
The Superstrut 1-5/8 in. x 10 ft. Metal Framing Channel can be used for framing and mounting and for constructing load centers and vertical pipe supports. With a gold-galvanized finish and a half-slot construction, the channel can also be used to create a trapeze for conduit and mechanical piping and to support duct and cable trays. The 12-Gauge material can be cut to shorter lengths.
- Used for framing and mounting and for constructing load centers and vertical pipe supports
- Can also be used to create a trapeze for conduit and mechanical piping and to support duct and cable trays
- Gold-galvanized finish
- Designed for use with electrical conduits and mechanical piping
- 12-Gauge, half-slot construction
- Each piece is 10 ft. l
- 1-5/8 in. x 1-5/8 in., 9/16 in. x 1-1/8 in. slots on 2 in. centers
Support copper runs with perforated metal hanger strap. This durable, copper plated steel strap is easy to install and is 10 ft. L. Easily cut to desired length for a variety of plumbing and HVAC applications.
- Copper clad steel
- 24-Gauge steel
- Bolt holes
- 3/4 in. wide
- 70# max static load rating
Oatey Half Clamp Pipe Clamps with Nails are designed for securing copper, PEX and CPVC piping to mounting surfaces. Made of corrosion resistant polypropylene, these pipe support clamps feature a pre-loaded, rust resistant nail for easy installation and a ribbed design for noise reduction. Oatey products have earned the trust of plumbing professionals for over 100 years.
- 1/2 in. half pipe clamp with nail
- Ideal for securing tubes to mounting surfaces
- For use with copper, PEX and CPVC piping
- Pre-loaded, rust resistant nail provides fast and easy installation
- Ribbed design insulates against water line noise
- Fits 1/2 in. pipes
- Made of corrosion resistant polypropylene
- Can be used on hydronic systems
Support HVAC or pipe runs with perforated metal hanger strap. You can hang insulated flexible duct, round pipe or rectangular duct with this perforated strapping. This durable, galvanized steel strap is easy to install and is 10 ft. L. Easily cut to desired length for a variety of plumbing and HVAC applications.
- Coated steel
- 30-Gauge steel
- Bolt holes
- 0.75 W
- 10 ft. coil
- Made in Pennsylvania
2 hole pipe straps used to attach vertical or horizontal runs of PVC or iron pipe. Snap on feature facilities fast and easy installation. The strap is constructed of galvanized steel. Manufactured in Pennsylvania.
- Galvanized steel material
- Snap on feature facilities fast and easy installation
- For 3/4 in. IPS
- 3/4 in. W
- 22gauge steel
- Made in Pennsylvania
2 hole pipe straps used to attach vertical or horizontal runs of PVC or iron pipe. Snap on feature facilities fast and easy installation. The strap is constructed of galvanized steel. Manufactured in Pennsylvania.
- Galvanized steel material
- Snap on feature facilities fast and easy installation
- For 2 in. IPS
- 1.0 in. W
- 19-Gauge steel
- Made in Pennsylvania
The 3/8 in. Copper Hanger Plate is designed for attaching a rod to a wooden member. This part is designed for use in conjunction with our M-718 Split Ring. This item is crafted of malleable iron with a copper plating.
- Designed for attaching a rod to a wooden member
- Size 3/8 in.
- Flange, ceiling
- Malleable iron
- Copper plating
- Use in conjunction with our M-718 Split Ring
Split ring hangers for offset pipe runs. Off set determined by length of rod used in installation (sold separately). Usually installed with flange plate (also sold separately).
- Ductile iron construction
- Zinc plated finish
- 1.25 in. pipe
- Use with 3/8 in. threaded rod
- For offset installations
- Comes in other sizes
Popularly known as the Greenfied hanger, this plastic coated DWV hanger supports runs of PVC or pipe. Manufactured in sizes from 1.5 in. to 6 in. IPS. Key hole fastener allows for easy installation. 12 in. perforated leg facilitates installation of pitched pipe runs.
- Galvanized steel material
- 18-Gauge steel
- 3/4 in. wide
- Plastic coated
- For 2 in. iron pipe size
- Also available uncoated
To fix and secure a cable. 1 year limited warranty. Open back design allows installation after a member is placed in position.
- Copper clad
- 2-hole strap
- Product may also be called a strap
- Packed 100 to a bag
- Copper clap strap
- 3/4 in.
Designed for the support of non-insulated copper tubing lines. The MT-718 is furnished tapped for bolt thread and is used with the MT-742-R ceiling plate. Also available in a 2 bolt design.
- Pipe straps, pipe clamps and hangers (series 700)
- Malleable iron
- Copper plated
- Hanger
- Split ring
- Tube size 3/4 in. rod size 7/8 in.
Support HVAC or pipe runs with perforated metal hanger strap. You can hang insulated flexible duct, round pipe or rectangular duct with this perforated strapping. This durable, galvanized steel strap is easy to install and is 10 ft. L. Easily cut to desired length for a variety of plumbing and HVAC applications.
- Galvanized steel material
- 28-Gauge steel
- Alternating bolt holes and nail holes
- 0.75 wide
- 40# maximum static working load
- Easily cut to desired length
Super Strut Hanger Extension Ring. Designed to be used with in pipe. Black Finish made of Malleable Iron.
- Hanger
- Pipe size 1 in.
- Black finish
- Malleable iron
- Extension ring
- Super strut
Hanger is designed to hold pipe in diameter. Made of Black Finish Malleable Iron. Does not have an inlay.
- Hanger
- Extension ring
- Pipe size 1/2 in.
- Black finish
- Malleable iron
- Superstrut
Superstrut 3/8 in. Side Beam Connector. Made from Malleable Iron, with black finish. Designing to be used with 3/8 in. threaded rod.
- 3/8 in.
- Malleable iron
- Side beam connector
- Black
- Electrical hangers
- Super strut
PEXRITE PEX stub-out support 704-H is the 3 minute installation that eliminates in-wall fittings, concealed joints and soldering. The PEXRITE system of pipe supports are designed to provide a secure fit that prevents forward and backward movement, reduce noise and vibration and tighten by hand with ease. Compatible with all PEX tubing.
- PEX turn-out integrates with 103-18-H bracket
- Can be installed directly to stud
- Eliminates in-wall fittings and concealed joints
- Provides 360 degree turning radius when used with 103-18-H bracket
- Compatible with all PEX tubing manufacturers
- Standard/approvals: buy American Act Compliant, IAPMO/IPC/UPC listed
- Reduces noise and vibration
Oatey Plastic Hanger Straps are available in a variety of lengths and offer a quick and inexpensive way to hang PVC, ABS, galvanized, black iron or cast iron piping from joists or rafters. Made of durable polyethylene, these hanger straps are both non-corrosive and non-conductive and feature 1/8 in. nail holes spaced 3/4 in. apart for easy installation. Oatey products have earned the trust of plumbing professionals for over 100-years.
- Plastic hanger strap
- Used to hang pipe from joists or rafters
- Made of non-corrosive, non-conductive polyethylene
- For use with copper, PVC, ABS, galvanized, black iron and cast iron piping
- 3/4 in. width, 100 ft. length
- Strap features 1/8 in. nail holes spaced 3/4 in. apart
- Rigorously tested and proven to last in many conditions
- Flexible and easy to work with
Oatey DWV J-Hooks are available in a variety of sizes and provide a fast, economical way to support Schedule 30 and Schedule 40 PVC piping. Made of durable ABS plastic, J-hooks include pre-loaded nails in the stem for easy installation. A diagonal nail path offers flexibility for use in tight spaces, and a locking finger provides a tight hold in inverted applications. Additional holes allow for securing of cable ties and other fasteners. Oatey products have earned the trust of plumbing professionals for over 100 years.
- 3 in. DWV J-hook pipe hanger
- Designed to secure DWV piping
- For use with Schedule 30 and Schedule 40 PVC piping
- Enables the expansion and contraction of pipes
- Made of white ABS plastic
- Fits 3 in. pipes
- 7 in. length
- Pre-loaded nails in stem for easy installation
- Diagonal nail path for use in tight spaces
- Locking finger provides tight hold in inverted applications
- Additional holes allow securing of cable ties and other fasteners
Oatey Metal Hanger Straps are available in a variety of lengths and offer a quick and inexpensive way to hang pipe from joists or rafters. Made of durable metal and galvanized steel, these hanger straps are corrosion resistant and feature alternating 1/4 in. and 1/2 in. nail holes for easy installation. Use as a pipe hanger, conduit and duct hanger, tubing strap, utility strap and more. Oatey products have earned the trust of plumbing professionals for over 100-years.
- Metal hanger strap
- Used to hang pipe from joists or rafters
- Made of 28-gauge galvanized steel
- For use with PVC, ABS, galvanized, black iron and cast iron piping
- 3/4 in. width, 25 ft. length
- Strap features alternating 1/4 in. and 1/2 in. diameter nail holes
- Rigorously tested and proven to last in many conditions
- Flexible and easy to work with
Support HVAC or pipe runs with perforated metal hanger strap. You can hang insulated flexible duct, round pipe or rectangular duct with this perforated strapping. This durable, galvanized steel strap is easy to install and is 10 ft. L. Easily cut to desired length for a variety of plumbing and HVAC applications.
- Galvanized steel material
- 20-Gauge steel
- Bolt holes
- 0.75 W
- 10 ft. coil
- Made in Pennsylvania
Designed for the support of non-insulated copper tubing lines. The MT-718 is furnished tapped for bolt thread and is used with the MT-742-R ceiling plate. Also available in a 2 bolt design.
- Designed for the support of non-insulated copper tubing lines
- Malleable iron
- Split pipe ring
- Pipe straps, pipe clamps and hangers (series 700)
- Copper plated
- Super strut
2 hole pipe straps used to attach vertical or horizontal runs of PVC or iron pipe. Snap on feature facilities fast and easy installation. The strap is constructed of galvanized steel. Manufactured in Pennsylvania.
- Galvanized steel material
- Snap on feature facilities fast and easy installation
- For 1/2 in. IPS
- 3/4 in. W
- 22-Gauge steel
- Made in Pennsylvania
Sioux Chief Zip Stick Universal Pipe Hanger shall be used where necessary to support DWV piping according to all national code requirements. Hanger shall feature I-beam stem design for strength and rigidity and a high heat strap with a releasable locking mechanism. Hanger shall be noncorrosive and UV-resistant. Hanger shall be impact resistant to 0 degree F, and be able to withstand temperatures up to 140 degree F. Hanger shall include 2 pre-loaded zinc plated, rust resistant nails. Nails shall have a continuous rink shank to provide a more permanent installation. Hanger stem may be snapped off or cut to create a shorter stem in tight spaces.
- Perfect for hanging DWV
- Perfect for hanging wrapped or insulated pipe
- Can be used to hang bundles of PEX, cable or wiring
- Good for supporting vent pipe in attics
- Graduated numeral at nail ways for easy measuring
- Releasable locking mechanism