PEXRITE PEX stub-out support 704-H is the 3 minute installation that eliminates in-wall fittings, concealed joints and soldering. The PEXRITE system of pipe supports are designed to provide a secure fit that prevents forward and backward movement, reduce noise and vibration and tighten by hand with ease. Compatible with all PEX tubing.

• PEX turn-out integrates with 103-18-H bracket
• Can be installed directly to stud
• Eliminates in-wall fittings and concealed joints
• Provides 360 degree turning radius when used with 103-18-H bracket
• Compatible with all PEX tubing manufacturers
• Standard/approvals: buy American Act Compliant, IAPMO/IPC/UPC listed
• Reduces noise and vibration

Ensure pipes are securely installed while reducing irritating pipe noise with Water-Tite Plastic Insulating Suspension Clamps. Designed to support copper, PEX, and especially CPVC tubing, these plastic clamps isolate piping from wood framing and minimize the noise made from pipe expansion and contraction. These rugged tube suspension clamps are impact resistant to 0 degrees Fahrenheit (-18 degrees Celsius) and are capable of withstanding continuous maximum temperatures of up to 160 degrees Fahrenheit (71 degrees Celsius). They are available in a variety of sizes to fit piping ranging from 1/2 to 2 inches.

• Plastic insulating suspension clamp for all CTS (copper tube size) tubing
• Reduces noise from tubing expansion and contraction
• Ideal for isolating CPVC piping from wood
• Impact resistant to 0 degree F (-18 degree C); maximum temperature (continuous) of 160 degree F (71 degree C)
• Available in a variety of sizes to fit piping between 1/2 and 2 inches
• 1/2 in.

Harvey Pipe Wrap is designed to protect plastic and copper piping in concrete. High-quality polyethylene pipe wrap for industrial use. Superior all-weather moisture proof pipe protection for steel pipe, fittings and electrical conduit systems.

• Industrial application
• All weather protection
• UPC Listed
• Pipe wrap
• For steel and electrical conduit
• For industrial use

Support HVAC or pipe runs with perforated metal hanger strap. You can hang insulated flexible duct, round pipe or rectangular duct with this perforated strapping. This durable, galvanized steel strap is easy to install and is 10 ft. L. Easily cut to desired length for a variety of plumbing and HVAC applications.

• Coated steel
• 30-Gauge steel
• Bolt holes
• 0.75 W
• 10 ft. coil
• Made in Pennsylvania

Oatey DWV J-Hooks are available in a variety of sizes and provide a fast, economical way to support Schedule 30 and Schedule 40 PVC piping. Made of durable ABS plastic, J-hooks include pre-loaded nails in the stem for easy installation. A diagonal nail path offers flexibility for use in tight spaces, and a locking finger provides a tight hold in inverted applications. Additional holes allow for securing of cable ties and other fasteners. Oatey products have earned the trust of plumbing professionals for over 100 years.

• 3 in. DWV J-hook pipe hanger
• Designed to secure DWV piping
• For use with Schedule 30 and Schedule 40 PVC piping
• Enables the expansion and contraction of pipes
• Made of white ABS plastic
• Fits 3 in. pipes
• 7 in. length
• Pre-loaded nails in stem for easy installation
• Diagonal nail path for use in tight spaces
• Locking finger provides tight hold in inverted applications
• Additional holes allow securing of cable ties and other fasteners

For use in standard clamp applications. Fits pipe and hose. 300 Series stainless steel band and housing with a carbon steel zinc plated slotted hex head screw. Industrial worm-drive hose clamp with arcial perforations for added strength.

• For use in standard clamp applications
• Fits pipe and hose
• 300-series stainless steel band and housing with a carbon steel zinc plated slotted hex head screw
• Industrial worm-drive hose clamp with arcial perforations for added strength
• 10-per box
• Note: when choosing a clamp, measure the outside diameter of your hose or tube with the fitting installed

Holdrite galvanized support bracket solutions provide the optimal solution for a wide variety of applications. Ideal for sinks, lavatories and toilet stub-outs. The use of Holdrite galvanized steel bracket solutions are versatile, fast and easy to install. The 103-18-H is compatible with PEX, copper and CPVC.

• Versatile bracket ideal for sink, lavatory and toilet stub-out solutions
• Galvanized steel bracket with 1-3/8 in. keyed holes on 2 in. centers
• Integrates with 701-H and 704-H stub-out clamps with patented connection
• Pipe size 1/2 in., 3/4 in. and 1 in.
• Support sink/lavatory and toilet stub-out
• UPC/IPC/IAPMO listed
• 25 lbs. load rating

Support HVAC or pipe runs with perforated metal hanger strap. You can hang insulated flexible duct, round pipe or rectangular duct with this perforated strapping. This durable, galvanized steel strap is easy to install and is 10 ft. L. Easily cut to desired length for a variety of plumbing and HVAC applications.

• Galvanized steel material
• 24-Gauge steel
• Bolt holes
• 0.75 wide
• 70# max static working load

The Super strut black finish malleable iron C-Clamp. Uses threaded Rod size Rod Size 3/8 in. Design Load of 350 lbs. Black Finish Malleable Iron.

• Rod size 3/8 in.
• Design load 350 lbs.
• Black finish malleable iron
• Steel

The Apollo PEX 1/2 in. Stainless Steel PEX Barb Pinch Clamp (25-Pack) is simple to install and is designed for use with PEX pipe and barb fittings (not included). Made from corrosion resistant stainless for durability. Requires a pinch clamp tool (sold separately). Apollo PEX fasteners are a key component of the most economical potable water piping systems. Also capable of integration into hydronic heating systems, Apollo PEX fasteners can be can be used with brass and plastic fittings, valves, and manifolds (all sold separately). The Apollo PEX system is a comprehensive piping system comprised of brass fittings, poly alloy fittings, manifolds, valves, fasteners, tools and tubing designed for implementation in water delivery systems, simple or complex.

• Constructed of corrosion resistant stainless steel
• 1-pinch clamp tool is available to secure all pinch clamps, regardless of size
• Pro pack includes 100 stainless steel pinch clamps
• Available in 3/8 in., 1/2 in., 3/4 in., and 1 in. sizes
• Meets ASTM F2098 requirements

Popularly known as the Greenfied hanger, this plastic coated DWV hanger supports runs of PVC or pipe. Manufactured in sizes from 1.5 in. to 6 in. IPS. Key hole fastener allows for easy installation. 12 in. perforated leg facilitates installation of pitched pipe runs.

• Galvanized steel material
• 18-Gauge steel
• 3/4 in. wide
• Plastic coated
• For 2 in. iron pipe size
• Also available uncoated

Oatey Plastic Hanger Straps are available in a variety of lengths and offer a quick and inexpensive way to hang PVC, ABS, galvanized, black iron or cast iron piping from joists or rafters. Made of durable polyethylene, these hanger straps are both non-corrosive and non-conductive and feature 1/8 in. nail holes spaced 3/4 in. apart for easy installation. Oatey products have earned the trust of plumbing professionals for over 100-years.

• Plastic hanger strap
• Used to hang pipe from joists or rafters
• Made of non-corrosive, non-conductive polyethylene
• For use with copper, PVC, ABS, galvanized, black iron and cast iron piping
• 3/4 in. width, 100 ft. length
• Strap features 1/8 in. nail holes spaced 3/4 in. apart
• Rigorously tested and proven to last in many conditions
• Flexible and easy to work with

Oatey Copper Tube Straps enable flush mounting of the pipe to the wall, joist and rafters. Made of copper-plated steel, these tube straps are available in a variety of pipe sizes and are designed for use with copper, CPVC and PEX piping systems. Pre-drilled holes allow for fast and easy installation. Oatey products have earned the trust of plumbing professionals for over 100 years.

• 2 in. copper tube strap
• Allows pipe to be flush mounted to walls, joists and rafters
• Made of copper-plated steel
• For use with copper, CPVC and PEX piping
• Fits 1/2 in. pipes
• Pre-drilled holes allow for fast screw installation
• For warranty product details, refer to the Oatey Limited Warranty document

Sioux Chief Zip Stick Universal Pipe Hanger shall be used where necessary to support DWV piping according to all national code requirements. Hanger shall feature I-beam stem design for strength and rigidity and a high heat strap with a releasable locking mechanism. Hanger shall be noncorrosive and UV-resistant. Hanger shall be impact resistant to 0 degree F, and be able to withstand temperatures up to 140 degree F. Hanger shall include 2 pre-loaded zinc plated, rust resistant nails. Nails shall have a continuous rink shank to provide a more permanent installation. Hanger stem may be snapped off or cut to create a shorter stem in tight spaces.

• Perfect for hanging DWV
• Perfect for hanging wrapped or insulated pipe
• Can be used to hang bundles of PEX, cable or wiring
• Good for supporting vent pipe in attics
• Graduated numeral at nail ways for easy measuring
• Releasable locking mechanism

The Apollo PEX 3/4 in. Stainless Steel PEX Barb Pinch Clamp (25-Pack) is simple to install and is designed for use with PEX pipe and barb fittings (not included). Made from corrosion resistant stainless for durability. Requires a pinch clamp tool (sold separately). Apollo PEX fasteners are a key component of the most economical potable water piping systems. Also capable of integration into hydronic heating systems, Apollo PEX fasteners can be can be used with brass and plastic fittings, valves, and manifolds (all sold separately). The Apollo PEX system is a comprehensive piping system comprised of brass fittings, poly alloy fittings, manifolds, valves, fasteners, tools and tubing designed for implementation in water delivery systems, simple or complex.

• Constructed of corrosion resistant stainless steel
• 1-pinch clamp tool is available to secure all pinch clamps, regardless of size
• Pro pack includes 100 stainless steel pinch clamps
• Available in 3/8 in. 1/2 in. 3/4 in. and 1 in. sizes
• Meets ASTM F2098 requirements

3/4 in. Universal Pipe Clamp can be used to hold and mount metal strut or rigid conduit. Made of steel with an electro galvanized finish, the pipe clamp is corrosion resistant and has a superior paint base. Pipe clamps are of advance design and afford a new and better way of ordinary use.

• Use to secure or mount strut channel or rigid conduit
• Can be used with rigid or imc conduit, pipe and EMT
• Steel construction with electro galvanized finish
• OSHA compliant
• Straps are interchangeable with a 1-1/2 in. strut for broader applications
• Strap thickness 14 Gauge, size 3/4 in., pipe outer diameter .932 in. - 1.050 in.

The 1 in. Universal Clamp is designed for use with RIGID and IMC conduit, pipe and EMT conduit. It is made with metal and has an electroplated zinc finish for added strength. Its straps are interchangeable with 1 in. strut for broader application and the bolt has a combination hex and slot head for easier tightening.

• Clamps 1 in. conduit for ceiling suspension
• Gold-galvanized steel construction
• Compatible with 12-Gauge or 14-Gauge metal framing channel
• 550 lbs. load rating
• OSHA compliant

Ensure pipes are securely installed while reducing irritating pipe noise with Water-Tite Plastic Insulating Suspension Clamps. Designed to support copper, PEX, and especially CPVC tubing, these plastic clamps isolate piping from wood framing and minimize the noise made from pipe expansion and contraction. These rugged tube suspension clamps are impact resistant to 0 degrees Fahrenheit (-18 degrees Celsius) and are capable of withstanding continuous maximum temperatures of up to 160 degrees Fahrenheit (71 degrees Celsius). They are available in a variety of sizes to fit piping ranging from 1/2 to 2 inches.

• Plastic insulating suspension clamp for all CTS (copper tube size) tubing
• Reduces noise from tubing expansion and contraction
• Ideal for isolating CPVC piping from wood
• Impact resistant to 0 degree F (-18 degree C); maximum temperature (continuous) of 160 degree F (71 degree C)
• Available in a variety of sizes to fit piping between 1/2 and 2 inches
• Combination clamp

PEXRITE PEX stub-out support 701-H is the 3 minute installation that eliminates in-wall fittings, concealed joints and soldering. The PEXRITE system of pipe supports are designed to provide a secure fit that prevents forward and backward movement, reduce noise and vibration and tighten by hand with ease.

• Stub-out clamp ideal for 1/2 in. CTS PEX-to-copper transition at lavatory/sink or toilet
• Integrates with 103-18-H bracket
• Compatible with PEX, copper and CPVC
• Tightens by hand - no tools required
• Secure fit resists forward and backward movement

The 3/8 in. Black Hanger Plate is crafted of malleable Iron. The item has a black finish. This ceiling flange is intended for use with 3/8 in. threaded rod.

• 3/8 in.
• Malleable iron
• Ceiling flange
• Black finish
• For use with 3/8 in. threaded rod
• Cast

Support HVAC or pipe runs with perforated metal hanger strap. You can hang insulated flexible duct, round pipe or rectangular duct with this perforated strapping. This durable, galvanized steel strap is easy to install and is 10 ft. L. Easily cut to desired length for a variety of plumbing and HVAC applications.

• Galvanized steel material
• 28-Gauge steel
• Alternating bolt holes and nail holes
• 0.75 wide
• 40# maximum static working load
• Easily cut to desired length

Support HVAC or pipe runs with perforated metal hanger strap. One can hang insulated flexible duct, round pipe or rectangular duct with this perforated strapping. This durable, galvanized steel strap is easy to install and is 100 ft. L. Easily cut to desired length for a variety of plumbing and HVAC applications.

• Galvanized steel material
• 28-Gauge steel
• 1/4 in. bolt holes
• 0.75 wide
• Easy to cut to length
• Hardware not included

The 1/2 in. Universal Clamp is designed to be twist-inserted anywhere along the side of a channel. The clamp comes pre-assembled for easy handling. The electroplated zinc finish provides durability for any project.

• Designed to be twist-inserted anywhere along the side of a channel
• Electroplated zinc finish
• Compatible with RIGID or IMC conduit, pipe and EMT
• Use with 0.706 - 0.840 pipe, conduit or tubing
• Bolt head is combination slot and hex head for flexibility of attachment
• Square nut is captivated on the shoulder for easy 1-handed tightening

PVC non-metallic conduit clamps can be used with Sch. 40 and Sch. 80 rigid non-metallic conduit (RNC). Clamps allow conduit to expand and contract eliminating the temperature-related bowing and flexing common with conduit. Unlike metallic systems, on-metallic clamps are lighter, can be installed in less time and are easily fabricated on the job. Clamps are nonconductive assuring a safe system. Resistant to sunlight and Listed for exposed or outdoor usage, Non-metallic PVC conduit clamps are durable and will not rust or corrode.

• Used to support rigid non-metallic conduit (RNC) and rigid steel conduit
• PVC construction eliminates temperature related flexing with non-metallic conduit
• UV inhibited for use in direct sunlight
• UL Listed
• 20 pieces per bag
• Some clamp applications require 2 screws, 2 nuts and 2 washers

Stud guards are intended to protect plastic pipe and copper tubing runs though 2 x 4s from drywall nails and screws. The parts are 1.5" wide and come in a variety of lengths of multiple applications. These stud guards are manufactured in Pennsylvania.

• 1.5" wide
• 3" long
• 18 gauge steel
• Self nailing
• No nails required
• Intended to protect pipe from drywall screws

The 3/8 in. Copper Hanger Plate is designed for attaching a rod to a wooden member. This part is designed for use in conjunction with our M-718 Split Ring. This item is crafted of malleable iron with a copper plating.

• Designed for attaching a rod to a wooden member
• Size 3/8 in.
• Flange, ceiling
• Malleable iron
• Copper plating
• Use in conjunction with our M-718 Split Ring

Oatey Standard Pipe Clamps are designed for use with copper, PEX or CPVC piping. Available in a variety of sizes, these pipe clamps allow for the pipe to be flush mounted to walls and joists and feature a ribbed design that allows the pipe to cool faster and expand or contract freely. Pipe clamps are made of high-impact polypropylene and can be used with hydronic heating systems. A pre-loaded nail provides fast and easy installation. Oatey products have earned the trust of plumbing professionals for over 100 years.

• 1/2 in. standard pipe clamp
• For use with copper, CPVC and PEX piping
• Secures tube to mounting surface
• Pre-loaded nail provides fast and easy installation
• Clamp isolates pipe from stud and reduces noise
• Fits 1/2 in. pipes
• Ribbed design allows pipe to cool faster and expand/contract freely
• Made of high-impact polypropylene
• Can be used on hydronic systems
• 0-160°F temperature range

For use in standard clamp applications. Fits pipe and hose. 300 Series stainless steel band and housing with a carbon steel zinc plated slotted hex head screw. Industrial worm-drive hose clamp with arcial perforations for added strength.

• For use in standard clamp applications
• Fits pipe and hose
• 300-series stainless steel band and housing with a carbon steel zinc plated slotted hex head screw
• Industrial worm-drive hose clamp with arcial perforations for added strength
• 10-per box
• Note: when choosing a clamp, measure the outside diameter of your hose or tube with the fitting installed

For use in standard clamp applications. Fits pipe and hose. 300 Series stainless steel band and housing with a carbon steel zinc plated slotted hex head screw. Industrial worm-drive hose clamp with arcial perforations for added strength.

• For use in standard clamp applications
• Fits pipe and hose
• 300-series stainless steel band and housing with a carbon steel zinc plated slotted hex head screw
• Industrial worm-drive hose clamp with arcial perforations for added strength
• 10-per box
• Note: when choosing a clamp, measure the outside diameter of your hose or tube with the fitting installed

Pre-slit so they slip onto pipes. Tube is made of closed cell polyethylene foam. Ideal for residential applications.

• Fits 3/4 in. copper pipe or 1/2 in. iron pipe
• Protects pipes against freezing
• Prevents pipes from sweating and dripping
• Conserves energy
• 0.5 in. wall thickness
• R-value 3.1

Popularly known as the Greenfied hanger, this plastic coated DWV hanger supports runs of PVC or pipe. Manufactured in sizes from 1.5 in. to 6 in. IPS. Key hole fastener allows for easy installation. 12 in. Perforated leg facilitates installation of pitched pipe runs.

• Galvanized steel material
• 16-Gauge steel
• 3/4 in. wide
• Plastic coated
• For 3 in. iron pipe size
• Also available without plastic coating

The Superstrut 1-5/8 in. x 10 ft. Metal Framing Channel can be used for framing and mounting and for constructing load centers and vertical pipe supports. With a gold-galvanized finish and a half-slot construction, the channel can also be used to create a trapeze for conduit and mechanical piping and to support duct and cable trays. The 12-Gauge material can be cut to shorter lengths.

• Used for framing and mounting and for constructing load centers and vertical pipe supports
• Can also be used to create a trapeze for conduit and mechanical piping and to support duct and cable trays
• Gold-galvanized finish
• Designed for use with electrical conduits and mechanical piping
• 12-Gauge, half-slot construction
• Each piece is 10 ft. l
• 1-5/8 in. x 1-5/8 in., 9/16 in. x 1-1/8 in. slots on 2 in. centers

Foam Insulation Tape features high-temperature resistance, low water absorption, low moisture vapor transmission, good buoyancy, excellent thermal insulation and chemical resistance. It also provides a quick and easy solution to insulating pipes. The high moldability of the product allows Foam Insulation Tape to be easily manipulated around valves and fittings.

• Indoor / outdoor use
• Fits well around valves and fittings
• Easily cut and molded
• Easy to use
• Clean, smooth appearance
• Peel and stick

: A general-purpose industrial worm-drive hose clamp with arcial perforations for added strength. 1/2 in. Band in 300-Series SS. 10 pieces per box.

• For use in high corrosion, marine and underground applications
• 300 series stainless steel band and housing
• 1/2 in. Band with arcial Perforations
• Quadra-lock construction
• SAE standard J1508 type F
• 10 per box

Ensure pipes are securely installed with Water-Tite Plastic Half Clamps with Preloaded Nails. Designed to support copper and PEX tubing (not recommended for CPVC) and available in sizes that fit either 3/8 in. or 1/2 in. pipe, these plastic half clamps isolate piping from wood framing. They are impact resistant to 0 degree F (-18 degree C) and are capable of withstanding continuous maximum temperatures of up to 160 degree F (71 degree C). Each half clamp comes with a preloaded nail for quick installation.

• Plastic pipe half clamp for copper and PEX tubing (not recommended for CPVC)
• Isolates piping from wood
• Includes preloaded nail for easy installation
• Impact resistant to 0 degree F (-18 degree C); maximum temperature (continuous) of 160 degree F (71 degree C)
• Available in sizes that fit either 3/8 in. or 1/2 in. pipe
• 1/2 in.

Oatey Standard Pipe Clamps are designed for use with copper, PEX or CPVC piping. Available in a variety of sizes, these pipe clamps allow for the pipe to be flush mounted to walls and joists and feature a ribbed design that allows the pipe to cool faster and expand or contract freely. Pipe clamps are made of high-impact polypropylene and can be used with hydronic heating systems. A pre-loaded nail provides fast and easy installation. Oatey products have earned the trust of plumbing professionals for over 100 years.

• 3/4 in. standard pipe clamp
• For use with copper, CPVC and PEX piping
• Secures tube to mounting surface
• Pre-loaded nail provides fast and easy installation
• Clamp isolates pipe from stud and reduces noise
• Fits 3/4 in. pipes
• Ribbed design allows pipe to cool faster and expand/contract freely
• Made of high-impact polypropylene
• Can be used on hydronic systems
• 0-160°F temperature range

Designed for the support of non-insulated copper tubing lines. The MT-718 is furnished tapped for bolt thread and is used with the MT-742-R ceiling plate. Also available in a 2 bolt design.

• Pipe straps, pipe clamps and hangers (series 700)
• Malleable iron
• Copper plated
• Hanger
• Split ring
• Tube size 3/4 in. rod size 7/8 in.

Support HVAC or pipe runs with perforated metal hanger strap. You can hang insulated flexible duct, round pipe or rectangular duct with this perforated strapping. This durable, galvanized steel strap is easy to install and is 10 ft. L. Easily cut to desired length for a variety of plumbing and HVAC applications.

• Galvanized steel material
• 20-Gauge steel
• Bolt holes
• 0.75 W
• 10 ft. coil
• Made in Pennsylvania

Ensure pipes are securely installed with Water-Tite Plastic Half Clamps with Preloaded Nails. Designed to support copper and PEX tubing (not recommended for CPVC) and available in sizes that fit 1/2 in., 3/4 in. or 1 in. pipe, these plastic half clamps isolate piping from wood framing. They are impact resistant to 0 degree F (-18 degree C) and are capable of withstanding continuous maximum temperatures of up to 160 degree F (71 degree C). Each half clamp comes with a preloaded nail for quick installation.

• Plastic half clamp for copper and PEX tubing (not recommended for CPVC)
• Isolates piping from wood
• Includes preloaded nail for easy installation
• Impact resistant to 0 degree F (-18 degree C); maximum temperature (continuous) of 160 degree F (71 degree C)
• Available in sizes that fit 1/2 in., 3/4 in. or 1 in. pipe
• 3/4 in.

The Holdrite Stout System is suited for lavatory, shower, toilet, water heater and various vertical and horizontal applications. The multi-purpose galvanized steel brackets can be used nearly anywhere and are ideal for applications where high strength is required. The slot-and-hole pattern permits wide versatility in positioning; clamps and fittings can be mounted vertically or horizontally. They attach between studs or joists and a bendable end tab design allows for recessed or surface mounting.

• Telescoping design supports copper, PEX, CPVC and many other types of piping
• Have a maximum uniform load rating of 225 lbs.
• Includes 4 screws
• Slot-and-hole pattern permits wide versatility in positioning; clamps and fittings can be mounted vertically or horizontally
• Attach between studs or joists and a bendable end tab design allows for recessed or surface mounting
• Ideal for lavatory, shower, toilet, vertical, and horizontal applications

PVC non-metallic conduit clamps can be used with Sch. 40 and Sch. 80 rigid non-metallic conduit (RNC). Clamps allow conduit to expand and contract eliminating the temperature-related bowing and flexing common with conduit. Unlike metallic systems, on-metallic clamps are lighter, can be installed in less time and are easily fabricated on the job. Clamps are nonconductive assuring a safe system. Resistant to sunlight and Listed for exposed or outdoor usage, Non-metallic PVC conduit clamps are durable and will not rust or corrode.

• Used to support rigid non-metallic conduit (RNC) and rigid steel conduit
• PVC construction eliminates temperature related flexing with non-metallic conduit
• UV inhibited for use in direct sunlight
• Weighing less than metallic systems means more efficient and quicker installation time
• UL Listed
• 25-pieces per bag
• Some clamp applications require 2 screws, 2 nuts and 2 washers

Stud guards are intended to protect plastic pipe and copper tubing runs though 2 x 4s from drywall nails and screws. The parts are 1.5" wide and come in a variety of lengths of multiple applications. These stud guards are manufactured in Pennsylvania.

• 1.5" wide
• 5" long
• 18 gauge steel
• Self nailing
• Intended to protect pipe from drywall nails and screws.
• Also available in 3"

The 1-1/2 in. Universal Clamp is designed for use with RIGID and IMC conduit, pipe and EMT conduit. It is made with metal and has an electroplated zinc finish for added strength. Its straps are interchangeable with 1-1/2 in. strut for broader application, and the bolt has a combination hex and slot head for easier tightening.

• Use with RIGID and IMC conduit, pipe and EMT conduit
• Metal construction for strength
• Electroplated zinc finishes for added durability
• Combination slot- and hex head for flexibility of attachment
• Square nut on clamp side for easy 1-handed tightening
• Straps are interchangeable with 1-1/2 in. strut for broader application

For use in standard clamp applications. Fits pipe and hose. 300 Series stainless steel band and housing with a carbon steel zinc plated slotted hex head screw. Industrial worm-drive hose clamp with arcial perforations for added strength.

• For use in standard clamp applications
• Fits pipe and hose
• 300-series stainless steel band and housing with a carbon steel zinc plated slotted hex head screw
• Industrial worm-drive hose clamp with arcial perforations for added strength
• 10-per box
• Note: when choosing a clamp, measure the outside diameter of your hose or tube with the fitting installed

Oatey Copper and Steel Pipe Hooks are designed to support copper, PVC, CPVC, PEX, galvanized and black iron piping. Available in a variety of sizes, these hooks are self-nailing for easy installation. Oatey products have earned the trust of plumbing professionals for over 100 years.

• Steel wire pipe hook
• Supports pipe from rafters or joists
• Fits 3/4 in. pipes
• For use with copper, PVC, CPVC and PEX piping
• 6 in. length
• Self-nailing feature allows for easy installation
• Made of 10-gauge steel
• For warranty product details, refer to the Oatey Limited Warranty document

The HOLDRITE Stout System is suited for lavatory, shower, toilet, water heater and various vertical and horizontal applications. The multi-purpose galvanized steel brackets can be used nearly anywhere and are ideal for applications where high strength is required. The slot-and-hole pattern permits wide versatility in positioning; clamps and fittings can be mounted vertically or horizontally. They attach between studs or joists and a bendable end tab design allows for recessed or surface mounting.

• Telescoping design supports copper, PEX, CPVC and many other types of piping
• Have a maximum uniform load rating of 1150 lbs.
• Includes 4 screws
• Slot-and-hole pattern permits wide versatility in positioning; clamps and fittings can be mounted vertically or horizontally
• Attach between studs or joists and a bendable end tab design allows for recessed or surface mounting
• Adjustable range 10 in. to 18 in.