Pipe Clamps & Supports
PEXRITE PEX stub-out support 704-H is the 3 minute installation that eliminates in-wall fittings, concealed joints and soldering. The PEXRITE system of pipe supports are designed to provide a secure fit that prevents forward and backward movement, reduce noise and vibration and tighten by hand with ease. Compatible with all PEX tubing.
- PEX turn-out integrates with 103-18-H bracket
- Can be installed directly to stud
- Eliminates in-wall fittings and concealed joints
- Provides 360 degree turning radius when used with 103-18-H bracket
- Compatible with all PEX tubing manufacturers
- Standard/approvals: buy American Act Compliant, IAPMO/IPC/UPC listed
- Reduces noise and vibration
Harvey Pipe Wrap is designed to protect plastic and copper piping in concrete. High-quality polyethylene pipe wrap for industrial use. Superior all-weather moisture proof pipe protection for steel pipe, fittings and electrical conduit systems.
- Industrial application
- All weather protection
- UPC Listed
- Pipe wrap
- For steel and electrical conduit
- For industrial use
Ensure pipes are securely installed while reducing irritating pipe noise with Water-Tite Plastic Insulating Suspension Clamps. Designed to support copper, PEX, and especially CPVC tubing, these plastic clamps isolate piping from wood framing and minimize the noise made from pipe expansion and contraction. These rugged tube suspension clamps are impact resistant to 0 degrees Fahrenheit (-18 degrees Celsius) and are capable of withstanding continuous maximum temperatures of up to 160 degrees Fahrenheit (71 degrees Celsius). They are available in a variety of sizes to fit piping ranging from 1/2 to 2 inches.
- Plastic insulating suspension clamp for all CTS (copper tube size) tubing
- Reduces noise from tubing expansion and contraction
- Ideal for isolating CPVC piping from wood
- Impact resistant to 0 degree F (-18 degree C); maximum temperature (continuous) of 160 degree F (71 degree C)
- Available in a variety of sizes to fit piping between 1/2 and 2 inches
- Combination clamp
Ensure pipes are securely installed while reducing irritating pipe noise with Water-Tite Plastic Insulating Suspension Clamps. Designed to support copper, PEX, and especially CPVC tubing, these plastic clamps isolate piping from wood framing and minimize the noise made from pipe expansion and contraction. These rugged tube suspension clamps are impact resistant to 0 degrees Fahrenheit (-18 degrees Celsius) and are capable of withstanding continuous maximum temperatures of up to 160 degrees Fahrenheit (71 degrees Celsius). They are available in a variety of sizes to fit piping ranging from 1/2 to 2 inches.
- Plastic insulating suspension clamp for all CTS (copper tube size) tubing
- Reduces noise from tubing expansion and contraction
- Ideal for isolating CPVC piping from wood
- Impact resistant to 0 degree F (-18 degree C); maximum temperature (continuous) of 160 degree F (71 degree C)
- Available in a variety of sizes to fit piping between 1/2 and 2 inches
- 1/2 in.
Oatey DWV J-Hooks are available in a variety of sizes and provide a fast, economical way to support Schedule 30 and Schedule 40 PVC piping. Made of durable ABS plastic, J-hooks include pre-loaded nails in the stem for easy installation. A diagonal nail path offers flexibility for use in tight spaces, and a locking finger provides a tight hold in inverted applications. Additional holes allow for securing of cable ties and other fasteners. Oatey products have earned the trust of plumbing professionals for over 100 years.
- 3 in. DWV J-hook pipe hanger
- Designed to secure DWV piping
- For use with Schedule 30 and Schedule 40 PVC piping
- Enables the expansion and contraction of pipes
- Made of white ABS plastic
- Fits 3 in. pipes
- 7 in. length
- Pre-loaded nails in stem for easy installation
- Diagonal nail path for use in tight spaces
- Locking finger provides tight hold in inverted applications
- Additional holes allow securing of cable ties and other fasteners
The Apollo PEX 3/4 in. Stainless Steel PEX Barb Pinch Clamp (25-Pack) is simple to install and is designed for use with PEX pipe and barb fittings (not included). Made from corrosion resistant stainless for durability. Requires a pinch clamp tool (sold separately). Apollo PEX fasteners are a key component of the most economical potable water piping systems. Also capable of integration into hydronic heating systems, Apollo PEX fasteners can be can be used with brass and plastic fittings, valves, and manifolds (all sold separately). The Apollo PEX system is a comprehensive piping system comprised of brass fittings, poly alloy fittings, manifolds, valves, fasteners, tools and tubing designed for implementation in water delivery systems, simple or complex.
- Constructed of corrosion resistant stainless steel
- 1-pinch clamp tool is available to secure all pinch clamps, regardless of size
- Pro pack includes 100 stainless steel pinch clamps
- Available in 3/8 in. 1/2 in. 3/4 in. and 1 in. sizes
- Meets ASTM F2098 requirements
The Apollo PEX 1/2 in. Stainless Steel PEX Barb Pinch Clamp (25-Pack) is simple to install and is designed for use with PEX pipe and barb fittings (not included). Made from corrosion resistant stainless for durability. Requires a pinch clamp tool (sold separately). Apollo PEX fasteners are a key component of the most economical potable water piping systems. Also capable of integration into hydronic heating systems, Apollo PEX fasteners can be can be used with brass and plastic fittings, valves, and manifolds (all sold separately). The Apollo PEX system is a comprehensive piping system comprised of brass fittings, poly alloy fittings, manifolds, valves, fasteners, tools and tubing designed for implementation in water delivery systems, simple or complex.
- Constructed of corrosion resistant stainless steel
- 1-pinch clamp tool is available to secure all pinch clamps, regardless of size
- Pro pack includes 100 stainless steel pinch clamps
- Available in 3/8 in., 1/2 in., 3/4 in., and 1 in. sizes
- Meets ASTM F2098 requirements
Support HVAC or pipe runs with perforated metal hanger strap. You can hang insulated flexible duct, round pipe or rectangular duct with this perforated strapping. This durable, galvanized steel strap is easy to install and is 10 ft. L. Easily cut to desired length for a variety of plumbing and HVAC applications.
- Galvanized steel material
- 24-Gauge steel
- Bolt holes
- 0.75 wide
- 70# max static working load
Oatey Copper Tube Straps enable flush mounting of the pipe to the wall, joist and rafters. Made of copper-plated steel, these tube straps are available in a variety of pipe sizes and are designed for use with copper, CPVC and PEX piping systems. Pre-drilled holes allow for fast and easy installation. Oatey products have earned the trust of plumbing professionals for over 100 years.
- 2 in. copper tube strap
- Allows pipe to be flush mounted to walls, joists and rafters
- Made of copper-plated steel
- For use with copper, CPVC and PEX piping
- Fits 1/2 in. pipes
- Pre-drilled holes allow for fast screw installation
- For warranty product details, refer to the Oatey Limited Warranty document
The HOLDRITE 103-26 is a 14-Gauge galvanized steel bracket with 1-3/8 in. keyed holes on 2 in. centers. Positions 1/2 in., 3/4 in. or 1 in. copper or CPVC tubing and 3/8 in. or 1/2 in. PEX. This versatile bracket should be used with HOLDRITE inserts.
- Galvanized steel bracket with 1-3/8 in. keyed holes on 2 in. centers
- Versatile bracket ideal for sink, lavatory and toilet plumbing solutions
- Integrates with HOLDRITE clamps #701 and #704 with patented connection
- Positions 1/2 in., 3/4 in. or 1 in. copper or CPVC tubing and 3/8 in. or 1/2 in. PEX
- 25 lbs. load rating
- UPC/IPC/IAPMO Listed
Oatey Standard Pipe Clamps are designed for use with copper, PEX or CPVC piping. Available in a variety of sizes, these pipe clamps allow for the pipe to be flush mounted to walls and joists and feature a ribbed design that allows the pipe to cool faster and expand or contract freely. Pipe clamps are made of high-impact polypropylene and can be used with hydronic heating systems. A pre-loaded nail provides fast and easy installation. Oatey products have earned the trust of plumbing professionals for over 100 years.
- 3/4 in. standard pipe clamp
- For use with copper, CPVC and PEX piping
- Secures tube to mounting surface
- Pre-loaded nail provides fast and easy installation
- Clamp isolates pipe from stud and reduces noise
- Fits 3/4 in. pipes
- Ribbed design allows pipe to cool faster and expand/contract freely
- Made of high-impact polypropylene
- Can be used on hydronic systems
- 0-160°F temperature range
Oatey Standard Pipe Clamps are designed for use with copper, PEX or CPVC piping. Available in a variety of sizes, these pipe clamps allow for the pipe to be flush mounted to walls and joists and feature a ribbed design that allows the pipe to cool faster and expand or contract freely. Pipe clamps are made of high-impact polypropylene and can be used with hydronic heating systems. A pre-loaded nail provides fast and easy installation. Oatey products have earned the trust of plumbing professionals for over 100 years.
- 1/2 in. standard pipe clamp
- For use with copper, CPVC and PEX piping
- Secures tube to mounting surface
- Pre-loaded nail provides fast and easy installation
- Clamp isolates pipe from stud and reduces noise
- Fits 1/2 in. pipes
- Ribbed design allows pipe to cool faster and expand/contract freely
- Made of high-impact polypropylene
- Can be used on hydronic systems
- 0-160°F temperature range
Support HVAC or pipe runs with perforated metal hanger strap. You can hang insulated flexible duct, round pipe or rectangular duct with this perforated strapping. This durable, galvanized steel strap is easy to install and is 10 ft. L. Easily cut to desired length for a variety of plumbing and HVAC applications.
- Coated steel
- 30-Gauge steel
- Bolt holes
- 0.75 W
- 10 ft. coil
- Made in Pennsylvania
Oatey Plastic Hanger Straps are available in a variety of lengths and offer a quick and inexpensive way to hang PVC, ABS, galvanized, black iron or cast iron piping from joists or rafters. Made of durable polyethylene, these hanger straps are both non-corrosive and non-conductive and feature 1/8 in. nail holes spaced 3/4 in. apart for easy installation. Oatey products have earned the trust of plumbing professionals for over 100-years.
- Plastic hanger strap
- Used to hang pipe from joists or rafters
- Made of non-corrosive, non-conductive polyethylene
- For use with copper, PVC, ABS, galvanized, black iron and cast iron piping
- 3/4 in. width, 100 ft. length
- Strap features 1/8 in. nail holes spaced 3/4 in. apart
- Rigorously tested and proven to last in many conditions
- Flexible and easy to work with
Popularly known as the Greenfied hanger, this plastic coated DWV hanger supports runs of PVC or pipe. Manufactured in sizes from 1.5 in. to 6 in. IPS. Key hole fastener allows for easy installation. 12 in. perforated leg facilitates installation of pitched pipe runs.
- Galvanized steel material
- 18-Gauge steel
- 3/4 in. wide
- Plastic coated
- For 2 in. iron pipe size
- Also available uncoated
Light-weight, streamlined clamp generally used in small diameter applications such as air and fuel lines. 410 stainless steel hex screw. 3-Piece Construction.
- Light-weight, streamlined clamp generally used in small diameter applications such as air and fuel lines
- 410-stainless steel hex screw
- 3-piece construction
- 10-per box
- Suitable for connections between 0.219 in. and 0.625 in.
- Note: when choosing a clamp, measure the outside diameter of your hose or tube with the fitting installed
The Superstrut 1-5/8 in. x 10 ft. Metal Framing Channel can be used for framing and mounting and for constructing load centers and vertical pipe supports. With a gold-galvanized finish and a half-slot construction, the channel can also be used to create a trapeze for conduit and mechanical piping and to support duct and cable trays. The 12-Gauge material can be cut to shorter lengths.
- Used for framing and mounting and for constructing load centers and vertical pipe supports
- Can also be used to create a trapeze for conduit and mechanical piping and to support duct and cable trays
- Gold-galvanized finish
- Designed for use with electrical conduits and mechanical piping
- 12-Gauge, half-slot construction
- Each piece is 10 ft. l
- 1-5/8 in. x 1-5/8 in., 9/16 in. x 1-1/8 in. slots on 2 in. centers
Holdrite galvanized support bracket solutions provide the optimal solution for a wide variety of applications. Ideal for sinks, lavatories and toilet stub-outs. The use of Holdrite galvanized steel bracket solutions are versatile, fast and easy to install. The 103-18-H is compatible with PEX, copper and CPVC.
- Versatile bracket ideal for sink, lavatory and toilet stub-out solutions
- Galvanized steel bracket with 1-3/8 in. keyed holes on 2 in. centers
- Integrates with 701-H and 704-H stub-out clamps with patented connection
- Pipe size 1/2 in., 3/4 in. and 1 in.
- Support sink/lavatory and toilet stub-out
- UPC/IPC/IAPMO listed
- 25 lbs. load rating
Support HVAC or pipe runs with perforated metal hanger strap. One can hang insulated flexible duct, round pipe or rectangular duct with this perforated strapping. This durable, galvanized steel strap is easy to install and is 100 ft. L. Easily cut to desired length for a variety of plumbing and HVAC applications.
- Galvanized steel material
- 28-Gauge steel
- 1/4 in. bolt holes
- 0.75 wide
- Easy to cut to length
- Hardware not included
The 3/8 in. Copper Hanger Plate is designed for attaching a rod to a wooden member. This part is designed for use in conjunction with our M-718 Split Ring. This item is crafted of malleable iron with a copper plating.
- Designed for attaching a rod to a wooden member
- Size 3/8 in.
- Flange, ceiling
- Malleable iron
- Copper plating
- Use in conjunction with our M-718 Split Ring
Ensure pipes are securely installed with Water-Tite Plastic Half Clamps with Preloaded Nails. Designed to support copper and PEX tubing (not recommended for CPVC) and available in sizes that fit either 3/8 in. or 1/2 in. pipe, these plastic half clamps isolate piping from wood framing. They are impact resistant to 0 degree F (-18 degree C) and are capable of withstanding continuous maximum temperatures of up to 160 degree F (71 degree C). Each half clamp comes with a preloaded nail for quick installation.
- Plastic pipe half clamp for copper and PEX tubing (not recommended for CPVC)
- Isolates piping from wood
- Includes preloaded nail for easy installation
- Impact resistant to 0 degree F (-18 degree C); maximum temperature (continuous) of 160 degree F (71 degree C)
- Available in sizes that fit either 3/8 in. or 1/2 in. pipe
- 1/2 in.
The 3/8 in. Black Hanger Plate is crafted of malleable Iron. The item has a black finish. This ceiling flange is intended for use with 3/8 in. threaded rod.
- 3/8 in.
- Malleable iron
- Ceiling flange
- Black finish
- For use with 3/8 in. threaded rod
- Cast
Designed for the support of non-insulated copper tubing lines. The MT-718 is furnished tapped for bolt thread and is used with the MT-742-R ceiling plate. Also available in a 2 bolt design.
- Pipe straps, pipe clamps and hangers (series 700)
- Malleable iron
- Copper plated
- Hanger
- Split ring
- Tube size 3/4 in. rod size 7/8 in.
PVC non-metallic conduit clamps can be used with Sch. 40 and Sch. 80 rigid non-metallic conduit (RNC). Clamps allow conduit to expand and contract eliminating the temperature-related bowing and flexing common with conduit. Unlike metallic systems, on-metallic clamps are lighter, can be installed in less time and are easily fabricated on the job. Clamps are nonconductive assuring a safe system. Resistant to sunlight and Listed for exposed or outdoor usage, Non-metallic PVC conduit clamps are durable and will not rust or corrode.
- Used to support rigid non-metallic conduit (RNC) and rigid steel conduit
- PVC construction eliminates temperature related flexing with non-metallic conduit
- UV inhibited for use in direct sunlight
- UL Listed
- 20 pieces per bag
- Some clamp applications require 2 screws, 2 nuts and 2 washers
Support HVAC or pipe runs with perforated metal hanger strap. You can hang insulated flexible duct, round pipe or rectangular duct with this perforated strapping. This durable, galvanized steel strap is easy to install and is 10 ft. L. Easily cut to desired length for a variety of plumbing and HVAC applications.
- Galvanized steel material
- 28-Gauge steel
- Alternating bolt holes and nail holes
- 0.75 wide
- 40# maximum static working load
- Easily cut to desired length
Sioux Chief Zip Stick Universal Pipe Hanger shall be used where necessary to support DWV piping according to all national code requirements. Hanger shall feature I-beam stem design for strength and rigidity and a high heat strap with a releasable locking mechanism. Hanger shall be noncorrosive and UV-resistant. Hanger shall be impact resistant to 0 degree F, and be able to withstand temperatures up to 140 degree F. Hanger shall include 2 pre-loaded zinc plated, rust resistant nails. Nails shall have a continuous rink shank to provide a more permanent installation. Hanger stem may be snapped off or cut to create a shorter stem in tight spaces.
- Perfect for hanging DWV
- Perfect for hanging wrapped or insulated pipe
- Can be used to hang bundles of PEX, cable or wiring
- Good for supporting vent pipe in attics
- Graduated numeral at nail ways for easy measuring
- Releasable locking mechanism
PVC non-metallic conduit clamps can be used with Sch. 40 and Sch. 80 rigid non-metallic conduit (RNC). Clamps allow conduit to expand and contract eliminating the temperature-related bowing and flexing common with conduit. Unlike metallic systems, on-metallic clamps are lighter, can be installed in less time and are easily fabricated on the job. Clamps are nonconductive assuring a safe system. Resistant to sunlight and Listed for exposed or outdoor usage, Non-metallic PVC conduit clamps are durable and will not rust or corrode.
- Used to support rigid non-metallic conduit (RNC) and rigid steel conduit
- PVC construction eliminates temperature related flexing with non-metallic conduit
- UV inhibited for use in direct sunlight
- Weighing less than metallic systems means more efficient and quicker installation time
- UL Listed
- 25-pieces per bag
- Some clamp applications require 2 screws, 2 nuts and 2 washers
The 1 in. Universal Clamp is designed for use with RIGID and IMC conduit, pipe and EMT conduit. It is made with metal and has an electroplated zinc finish for added strength. Its straps are interchangeable with 1 in. strut for broader application and the bolt has a combination hex and slot head for easier tightening.
- Clamps 1 in. conduit for ceiling suspension
- Gold-galvanized steel construction
- Compatible with 12-Gauge or 14-Gauge metal framing channel
- 550 lbs. load rating
- OSHA compliant
3/4 in. Universal Pipe Clamp can be used to hold and mount metal strut or rigid conduit. Made of steel with an electro galvanized finish, the pipe clamp is corrosion resistant and has a superior paint base. Pipe clamps are of advance design and afford a new and better way of ordinary use.
- Use to secure or mount strut channel or rigid conduit
- Can be used with rigid or imc conduit, pipe and EMT
- Steel construction with electro galvanized finish
- OSHA compliant
- Straps are interchangeable with a 1-1/2 in. strut for broader applications
- Strap thickness 14 Gauge, size 3/4 in., pipe outer diameter .932 in. - 1.050 in.
Popularly known as the Greenfied hanger, this plastic coated DWV hanger supports runs of PVC or pipe. Manufactured in sizes from 1.5 in. to 6 in. IPS. Key hole fastener allows for easy installation. 12 in. Perforated leg facilitates installation of pitched pipe runs.
- Galvanized steel material
- 16-Gauge steel
- 3/4 in. wide
- Plastic coated
- For 3 in. iron pipe size
- Also available without plastic coating
Pre-slit so they slip onto pipes. Tube is made of closed cell polyethylene foam. Ideal for residential applications.
- Fits 3/4 in. copper pipe or 1/2 in. iron pipe
- Protects pipes against freezing
- Prevents pipes from sweating and dripping
- Conserves energy
- 0.5 in. wall thickness
- R-value 3.1
Foam Insulation Tape features high-temperature resistance, low water absorption, low moisture vapor transmission, good buoyancy, excellent thermal insulation and chemical resistance. It also provides a quick and easy solution to insulating pipes. The high moldability of the product allows Foam Insulation Tape to be easily manipulated around valves and fittings.
- Indoor / outdoor use
- Fits well around valves and fittings
- Easily cut and molded
- Easy to use
- Clean, smooth appearance
- Peel and stick
Ensure pipes are securely installed with Water-Tite Plastic Half Clamps with Preloaded Nails. Designed to support copper and PEX tubing (not recommended for CPVC) and available in sizes that fit 1/2 in., 3/4 in. or 1 in. pipe, these plastic half clamps isolate piping from wood framing. They are impact resistant to 0 degree F (-18 degree C) and are capable of withstanding continuous maximum temperatures of up to 160 degree F (71 degree C). Each half clamp comes with a preloaded nail for quick installation.
- Plastic half clamp for copper and PEX tubing (not recommended for CPVC)
- Isolates piping from wood
- Includes preloaded nail for easy installation
- Impact resistant to 0 degree F (-18 degree C); maximum temperature (continuous) of 160 degree F (71 degree C)
- Available in sizes that fit 1/2 in., 3/4 in. or 1 in. pipe
- 3/4 in.
This product is used to protect cables from damage when installing drywall or paneling. Nail Plate is made of 18-Gauge steel. Product measurements are 9 x 1-1/2.
- 18-Gauge steel
- Protects cables from damage
- 9 in. x 1-1/2 in.
- Fits all stud sizes
- Steel
- Nail plate
For use in standard clamp applications. Fits pipe and hose. 300 Series stainless steel band and housing with a carbon steel zinc plated slotted hex head screw. Industrial worm-drive hose clamp with arcial perforations for added strength.
- For use in standard clamp applications
- Fits pipe and hose
- 300-series stainless steel band and housing with a carbon steel zinc plated slotted hex head screw
- Industrial worm-drive hose clamp with arcial perforations for added strength
- 10-per box
- Note: when choosing a clamp, measure the outside diameter of your hose or tube with the fitting installed
PEXRITE PEX stub-out support 701-H is the 3 minute installation that eliminates in-wall fittings, concealed joints and soldering. The PEXRITE system of pipe supports are designed to provide a secure fit that prevents forward and backward movement, reduce noise and vibration and tighten by hand with ease.
- Stub-out clamp ideal for 1/2 in. CTS PEX-to-copper transition at lavatory/sink or toilet
- Integrates with 103-18-H bracket
- Compatible with PEX, copper and CPVC
- Tightens by hand - no tools required
- Secure fit resists forward and backward movement
Bracket 15 hold 24-Gauge with eight 1/2 in., four 3/4 in. and three 1 in. holes. Can be nailed or screwed to wood or metal studs. Brackets available with several hole patterns. Simple installation, just nail bracket in place and solder the pipe to bracket.
- Can be nailed or screwed to wood or metal studs
- Brackets available with several hole patterns
- Just nail bracket in place and solder the pipe to bracket
- Bracket
- 24-Gauge
- Simple installation
The Super strut black finish malleable iron C-Clamp. Uses threaded Rod size Rod Size 3/8 in. Design Load of 350 lbs. Black Finish Malleable Iron.
- Rod size 3/8 in.
- Design load 350 lbs.
- Black finish malleable iron
- Steel
For use in standard clamp applications. Fits pipe and hose. 300 Series stainless steel band and housing with a carbon steel zinc plated slotted hex head screw. Industrial worm-drive hose clamp with arcial perforations for added strength.
- For use in standard clamp applications
- Fits pipe and hose
- 300-series stainless steel band and housing with a carbon steel zinc plated slotted hex head screw
- Industrial worm-drive hose clamp with arcial perforations for added strength
- 10-per box
- Note: when choosing a clamp, measure the outside diameter of your hose or tube with the fitting installed
![Shurtape PW 100 Corrosion-Resistant PVC Pipe Wrap Tape, BLACK PRINTED, 10 mils, 2 in. x 33.3 yds. [1 Roll]](https://images.hdsupplysolutions.com/image/upload/d_no_image.gif,f_auto,fl_lossy,c_limit,h_70,w_70/PRO_308307650_product_308307650_usn)
General purpose, corrosion-resistant PVC wrap tape for use on under and above ground pipe installations. PW 100 pipe wrap tape offers excellent moisture resistance and conformability. Used to protect metal and plastic piping.
- Non-corrosive, rubber-based adhesive
- Resists corrosion, moisture, bacteria, fungus and abrasion
- UV-resistant
- Lead free
- Excellent conformability
- 10-mil thickness
This item is designed for the support of non-insulated copper tubing lines. The MT-718 is furnished tapped for bolt thread and is used with the MT-742-R ceiling plate. This is also available in a 2 bolt design.
- Tube size 1 in.
- Rod size 3/8 in.
- Copper plated
- Malleable iron
- Designed for the support of non-insulated copper tubing lines
- Used with the MT-742-R ceiling plate
PVC non-metallic conduit clamps can be used with Schedule 40 and Schedule 80 rigid non-metallic conduit (RNC). Clamps allow conduit to expand and contract eliminating the temperature-related bowing and flexing common with conduit. Unlike metallic systems, non-metallic clamps are lighter, can be installed in less time and are easily fabricated on the job. Clamps are nonconductive assuring a safe system. Resistant to sunlight and listed for exposed or outdoor usage, Non-metallic PVC conduit clamps are durable and will not rust or corrode.
- Used to support rigid non-metallic conduit (RNC) and rigid steel conduit
- PVC construction eliminates temperature related flexing with non-metallic conduit
- UV inhibited for use in direct sunlight
- Weighing less than metallic systems means more efficient and quicker installation time
- UL listed
- 5 clamps per bag
- Some clamp applications require 2 screws, 2 nuts and 2 washers
Designed so that the maximum number of support and framing applications can be constructed with a minimum amount of labor and pieces. Channel is made of 14 Gauge, 1-5/8 in. x 13/16 in., by 10 ft. Half Slot Steel with 9/16 in. x 1-1/8 in. Slots on 2 in. Centers.
- 10 ft.
- 14-Gauge
- Slots on 2 in. centers
- Gold
- 1-5/8 in. x 13/16 in.
- Corrosion resistant
For use in standard clamp applications. Fits pipe and hose. 300 Series stainless steel band and housing with a carbon steel zinc plated slotted hex head screw. Industrial worm-drive hose clamp with arcial perforations for added strength.
- For use in standard clamp applications
- Fits pipe and hose
- 300-series stainless steel band and housing with a carbon steel zinc plated slotted hex head screw
- Industrial worm-drive hose clamp with arcial perforations for added strength
- 10-per box
- Note: when choosing a clamp, measure the outside diameter of your hose or tube with the fitting installed
Stud guards are intended to protect plastic pipe and copper tubing runs though 2 x 4s from drywall nails and screws. The parts are 1.5" wide and come in a variety of lengths of multiple applications. These stud guards are manufactured in Pennsylvania.
- 1.5" wide
- 5" long
- 18 gauge steel
- Self nailing
- Intended to protect pipe from drywall nails and screws.
- Also available in 3"
Super Strut Hanger Extension Ring. Designed to be used with in pipe. Black Finish made of Malleable Iron.
- Extension ring
- Pipe size 3/4 in.
- Black finish
- Malleable iron
- Hanger
- Super strut
These 1-1/2 in. PVC Conduit Clamps (5-Pack) feature corrosion and UV-resistant construction for indoor and outdoor applications. These clamps expand and contract to help prevent bowing caused by temperature changes.
- Use to install PVC, non-metallic or rigid steel conduit
- High-strength PVC construction expands and contracts freely to help eliminate bowing caused by temperature variances
- UV-resistant for use in direct sunlight
- For use in accordance with conduit spacing requirements per 99 NEC article 347-B
- UL and CSA safety listings
- Requires 2 screws, 2 nuts and 2 washers for proper installation (not included)
Designed for the support of non-insulated copper tubing lines. The MT-718 is furnished tapped for bolt thread and is used with the MT-742-R ceiling plate. Also available in a 2 bolt design.
- Designed for the support of non-insulated copper tubing lines
- Malleable iron
- Split pipe ring
- Pipe straps, pipe clamps and hangers (series 700)
- Copper plated
- Super strut