Pipe Clamps & Supports
Holdrite galvanized support bracket solutions provide the optimal solution for a wide variety of applications. Ideal for sinks, lavatories and toilet stub-outs. The use of Holdrite galvanized steel bracket solutions are versatile, fast and easy to install. The 103-18-H is compatible with PEX, copper and CPVC.
- Versatile bracket ideal for sink, lavatory and toilet stub-out solutions
- Galvanized steel bracket with 1-3/8 in. keyed holes on 2 in. centers
- Integrates with 701-H and 704-H stub-out clamps with patented connection
- Pipe size 1/2 in., 3/4 in. and 1 in.
- Support sink/lavatory and toilet stub-out
- UPC/IPC/IAPMO listed
- 25 lbs. load rating
Oatey DWV J-Hooks are available in a variety of sizes and provide a fast, economical way to support Schedule 30 and Schedule 40 PVC piping. Made of durable ABS plastic, J-hooks include pre-loaded nails in the stem for easy installation. A diagonal nail path offers flexibility for use in tight spaces, and a locking finger provides a tight hold in inverted applications. Additional holes allow for securing of cable ties and other fasteners. Oatey products have earned the trust of plumbing professionals for over 100 years.
- 3 in. DWV J-hook pipe hanger
- Designed to secure DWV piping
- For use with Schedule 30 and Schedule 40 PVC piping
- Enables the expansion and contraction of pipes
- Made of white ABS plastic
- Fits 3 in. pipes
- 7 in. length
- Pre-loaded nails in stem for easy installation
- Diagonal nail path for use in tight spaces
- Locking finger provides tight hold in inverted applications
- Additional holes allow securing of cable ties and other fasteners
The Super strut black finish malleable iron C-Clamp. Uses threaded Rod size Rod Size 3/8 in. Design Load of 350 lbs. Black Finish Malleable Iron.
- Rod size 3/8 in.
- Design load 350 lbs.
- Black finish malleable iron
- Steel
PEXRITE PEX stub-out support 704-H is the 3 minute installation that eliminates in-wall fittings, concealed joints and soldering. The PEXRITE system of pipe supports are designed to provide a secure fit that prevents forward and backward movement, reduce noise and vibration and tighten by hand with ease. Compatible with all PEX tubing.
- PEX turn-out integrates with 103-18-H bracket
- Can be installed directly to stud
- Eliminates in-wall fittings and concealed joints
- Provides 360 degree turning radius when used with 103-18-H bracket
- Compatible with all PEX tubing manufacturers
- Standard/approvals: buy American Act Compliant, IAPMO/IPC/UPC listed
- Reduces noise and vibration
Clamp is generally used in small diameter applications such as air & fuel lines. 300 stainless steel hex screw. 10 pieces per box.
- 1-piece housing in 300-series stainless steel
- 5/16 in. band with arcial perforations
- 3-piece construction
- SAE standard J1508 type M
- 1/4 in. 300-series ss hex screw
- 10 per box
Oatey Stud Guards and FHA Plates are designed to protect pipes and wiring from nails and screws after installation. Made if durable galvanized steel, stud guards and FHA plates offer easy installation. Oatey products have earned the trust of plumbing professionals for over 100 years.
- 5 in. x 8 in. stud guard
- Provides protection for pipes and wiring installations
- For horizontal stud penetrations
- Pre-drilled holes allow for fast screw installation
- Made of 16-gauge galvanized steel
- Rigorously tested and proven to last in many conditions
The 3/8 in. Copper Hanger Plate is designed for attaching a rod to a wooden member. This part is designed for use in conjunction with our M-718 Split Ring. This item is crafted of malleable iron with a copper plating.
- Designed for attaching a rod to a wooden member
- Size 3/8 in.
- Flange, ceiling
- Malleable iron
- Copper plating
- Use in conjunction with our M-718 Split Ring
Ensure pipes are securely installed while reducing irritating pipe noise with Water-Tite Plastic Insulating Suspension Clamps. Designed to support copper, PEX, and especially CPVC tubing, these plastic clamps isolate piping from wood framing and minimize the noise made from pipe expansion and contraction. These rugged tube suspension clamps are impact resistant to 0 degrees Fahrenheit (-18 degrees Celsius) and are capable of withstanding continuous maximum temperatures of up to 160 degrees Fahrenheit (71 degrees Celsius). They are available in a variety of sizes to fit piping ranging from 1/2 to 2 inches.
- Plastic insulating suspension clamp for all CTS (copper tube size) tubing
- Reduces noise from tubing expansion and contraction
- Ideal for isolating CPVC piping from wood
- Impact resistant to 0 degree F (-18 degree C); maximum temperature (continuous) of 160 degree F (71 degree C)
- Available in a variety of sizes to fit piping between 1/2 and 2 inches
- 1/2 in.
Oatey Copper Tube Straps enable flush mounting of the pipe to the wall, joist and rafters. Made of copper-plated steel, these tube straps are available in a variety of pipe sizes and are designed for use with copper, CPVC and PEX piping systems. Pre-drilled holes allow for fast and easy installation. Oatey products have earned the trust of plumbing professionals for over 100 years.
- 2 in. copper tube strap
- Allows pipe to be flush mounted to walls, joists and rafters
- Made of copper-plated steel
- For use with copper, CPVC and PEX piping
- Fits 1/2 in. pipes
- Pre-drilled holes allow for fast screw installation
- For warranty product details, refer to the Oatey Limited Warranty document
The 3/8 in. Black Hanger Plate is crafted of malleable Iron. The item has a black finish. This ceiling flange is intended for use with 3/8 in. threaded rod.
- 3/8 in.
- Malleable iron
- Ceiling flange
- Black finish
- For use with 3/8 in. threaded rod
- Cast
A general-purpose industrial worm-drive hose clamp with arcial perforations for added strength. 1/2 in. Band in 300-Series SS. 10 pieces per box.
- For use in high corrosion, marine and underground applications
- 300 series stainless steel band and housing
- 1/2 in. band with arcial perforations
- Quadra-lock construction
- SAE standard J1508 type F
- 10 per box
Foam Insulation Tape features high-temperature resistance, low water absorption, low moisture vapor transmission, good buoyancy, excellent thermal insulation and chemical resistance. It also provides a quick and easy solution to insulating pipes. The high moldability of the product allows Foam Insulation Tape to be easily manipulated around valves and fittings.
- Indoor / outdoor use
- Fits well around valves and fittings
- Easily cut and molded
- Easy to use
- Clean, smooth appearance
- Peel and stick
Popularly known as the Greenfied hanger, this plastic coated DWV hanger supports runs of PVC or pipe. Manufactured in sizes from 1.5 in. to 6 in. IPS. Key hole fastener allows for easy installation. 12 in. perforated leg facilitates installation of pitched pipe runs.
- Galvanized steel material
- 18-Gauge steel
- 3/4 in. wide
- Plastic coated
- For 2 in. iron pipe size
- Also available uncoated
Oatey Standard Pipe Clamps are designed for use with copper, PEX or CPVC piping. Available in a variety of sizes, these pipe clamps allow for the pipe to be flush mounted to walls and joists and feature a ribbed design that allows the pipe to cool faster and expand or contract freely. Pipe clamps are made of high-impact polypropylene and can be used with hydronic heating systems. A pre-loaded nail provides fast and easy installation. Oatey products have earned the trust of plumbing professionals for over 100 years.
- 1/2 in. standard pipe clamp
- For use with copper, CPVC and PEX piping
- Secures tube to mounting surface
- Pre-loaded nail provides fast and easy installation
- Clamp isolates pipe from stud and reduces noise
- Fits 1/2 in. pipes
- Ribbed design allows pipe to cool faster and expand/contract freely
- Made of high-impact polypropylene
- Can be used on hydronic systems
- 0-160°F temperature range
Support HVAC or pipe runs with perforated metal hanger strap. One can hang insulated flexible duct, round pipe or rectangular duct with this perforated strapping. This durable, galvanized steel strap is easy to install and is 100 ft. L. Easily cut to desired length for a variety of plumbing and HVAC applications.
- Galvanized steel material
- 28-Gauge steel
- 1/4 in. bolt holes
- 0.75 wide
- Easy to cut to length
- Hardware not included
The Apollo PEX 3/4 in. Stainless Steel PEX Barb Pinch Clamp (25-Pack) is simple to install and is designed for use with PEX pipe and barb fittings (not included). Made from corrosion resistant stainless for durability. Requires a pinch clamp tool (sold separately). Apollo PEX fasteners are a key component of the most economical potable water piping systems. Also capable of integration into hydronic heating systems, Apollo PEX fasteners can be can be used with brass and plastic fittings, valves, and manifolds (all sold separately). The Apollo PEX system is a comprehensive piping system comprised of brass fittings, poly alloy fittings, manifolds, valves, fasteners, tools and tubing designed for implementation in water delivery systems, simple or complex.
- Constructed of corrosion resistant stainless steel
- 1-pinch clamp tool is available to secure all pinch clamps, regardless of size
- Pro pack includes 100 stainless steel pinch clamps
- Available in 3/8 in. 1/2 in. 3/4 in. and 1 in. sizes
- Meets ASTM F2098 requirements
Designed for the support of non-insulated copper tubing lines. The MT-718 is furnished tapped for bolt thread and is used with the MT-742-R ceiling plate. Also available in a 2 bolt design.
- Pipe straps, pipe clamps and hangers (series 700)
- Malleable iron
- Copper plated
- Hanger
- Split ring
- Tube size 3/4 in. rod size 7/8 in.
IPS Pipe Insulator, 3/4 in. Plastic pipe insulator reduces noise from tubing expansion and contraction. Compatible with copper, cPVC and PEX Tubing.
- Plastic pipe insulator; compatible with all CTS (copper tube size) tubing
- Supports piping in wooden studs; fits 1-3/8-inch hole
- Reduces noise from piping expansion and contraction
- Impact resistant to 0 degree F (-18 degree C); maximum temperature (continuous) of 160 degree F (71 degree C)
- 3/4 in.
- Reduces noise
For use in standard clamp applications. Fits pipe and hose. 300 Series stainless steel band and housing with a carbon steel zinc plated slotted hex head screw. Streamlined hose clamp generally used in small-diameter applications, such as air and fuel lines.
- For use in standard clamp applications
- Fits pipe and hose
- 300-series stainless steel band and housing with a carbon steel zinc plated slotted hex head screw
- Streamlined hose clamp generally used in small-diameter applications, such as air and fuel lines
- 10-per box
- Note: when choosing a clamp, measure the outside diameter of your hose or tube with the fitting installed
Breeze Power-Seal is for standard clamp applications. SAE Standard J1508 Type F. 1/2 in. Band with Arcial Perforations.
- For use in standard clamp applications
- Fits pipe and hose
- 300-series stainless steel band and housing with a carbon steel zinc plated slotted hex head screw
- Industrial worm-drive hose clamp with racial perforations for added strength
- 10 per box
- Note: when choosing a clamp, measure the outside diameter of your hose or tube with the fitting installed
Designed for the support of non-insulated copper tubing lines. The MT-718 is furnished tapped for bolt thread and is used with the MT-742-R ceiling plate. Also available in a 2 bolt design.
- Designed for the support of non-insulated copper tubing lines
- Malleable iron
- Split pipe ring
- Pipe straps, pipe clamps and hangers (series 700)
- Copper plated
- Super strut
Light-weight, streamlined clamp generally used in small diameter applications such as air and fuel lines. 300 stainless steel hex screw. 3-Piece Construction.
- Light-weight, streamlined clamp generally used in small diameter applications such as air and fuel lines
- 300-stainless steel hex screw
- 3-piece construction
- 10-per box
- Suitable for connections between 0.4375 in. and .78125 in.
- Note: when choosing a clamp, measure the outside diameter of your hose or tube with the fitting installed
The Apollo PEX 1/2 in. Stainless Steel PEX Barb Pinch Clamp (25-Pack) is simple to install and is designed for use with PEX pipe and barb fittings (not included). Made from corrosion resistant stainless for durability. Requires a pinch clamp tool (sold separately). Apollo PEX fasteners are a key component of the most economical potable water piping systems. Also capable of integration into hydronic heating systems, Apollo PEX fasteners can be can be used with brass and plastic fittings, valves, and manifolds (all sold separately). The Apollo PEX system is a comprehensive piping system comprised of brass fittings, poly alloy fittings, manifolds, valves, fasteners, tools and tubing designed for implementation in water delivery systems, simple or complex.
- Constructed of corrosion resistant stainless steel
- 1-pinch clamp tool is available to secure all pinch clamps, regardless of size
- Pro pack includes 100 stainless steel pinch clamps
- Available in 3/8 in., 1/2 in., 3/4 in., and 1 in. sizes
- Meets ASTM F2098 requirements
Harvey Pipe Wrap is designed to protect plastic and copper piping in concrete. High-quality polyethylene pipe wrap for industrial use. Superior all-weather moisture proof pipe protection for steel pipe, fittings and electrical conduit systems.
- Industrial application
- All weather protection
- UPC Listed
- Pipe wrap
- For steel and electrical conduit
- For industrial use
Sioux Chief Zip Stick Universal Pipe Hanger shall be used where necessary to support DWV piping according to all national code requirements. Hanger shall feature I-beam stem design for strength and rigidity and a high heat strap with a releasable locking mechanism. Hanger shall be noncorrosive and UV-resistant. Hanger shall be impact resistant to 0 degree F, and be able to withstand temperatures up to 140 degree F. Hanger shall include 2 pre-loaded zinc plated, rust resistant nails. Nails shall have a continuous rink shank to provide a more permanent installation. Hanger stem may be snapped off or cut to create a shorter stem in tight spaces.
- Perfect for hanging DWV
- Perfect for hanging wrapped or insulated pipe
- Can be used to hang bundles of PEX, cable or wiring
- Good for supporting vent pipe in attics
- Graduated numeral at nail ways for easy measuring
- Releasable locking mechanism
Light-weight, streamlined clamp generally used in small diameter applications such as air & fuel lines. 1/4 in. 410 Stainless Steel Hex Screw. 10 pieces per box.
- 5/16 in. band with arcial perforations
- Three-piece construction
- SAE standard J1508 type M
- 1-piece housing in 300-series ss
- 10 per box
- Breeze warrants the products to be free from defects in material and workmanship
Support HVAC or pipe runs with perforated metal hanger strap. You can hang insulated flexible duct, round pipe or rectangular duct with this perforated strapping. This durable, galvanized steel strap is easy to install and is 10 ft. L. Easily cut to desired length for a variety of plumbing and HVAC applications.
- Galvanized steel material
- 20-Gauge steel
- Bolt holes
- 0.75 W
- 10 ft. coil
- Made in Pennsylvania
Protect plastic, PEX, CPVC, and copper piping in concrete with Water-Tite Polyethylene Pipe Sleeving. Made of lightweight, flexible, and durable polyethylene, these pipe sleeves are ideal for safeguarding pipes that are set into concrete in slab foundations. Simply insert the desired pipe into the sleeving prior to pouring the concrete slab. Water-Tite Pipe Sleeving comes in either red or blue to identify hot and cold water pipes and is available for various pipe sizes ranging from 1/2 to 2 inches. It comes in four thicknesses: 0.004, 0.006, 0.01, and 0.025 inch.
- Pipe sleeving for protecting supply tubing in slab foundations
- Designed for plastic, PEX, CPVC, and copper piping
- Red and blue colored sleeves available to distinguish hot and cold water pipes
- Comes in 0.004-, 0.006-, 0.010-, and 0.025-inch thicknesses
- Available for various pipe sizes ranging from 1/2 to 2 inches
- Protects
Bracket 15 hold 24-Gauge with eight 1/2 in., four 3/4 in. and three 1 in. holes. Can be nailed or screwed to wood or metal studs. Brackets available with several hole patterns. Simple installation, just nail bracket in place and solder the pipe to bracket.
- Durable support brackets; available with multiple hole configurations
- For use on lavatories, toilets, hose bibs, water heaters, or any water supply penetrating a wall
- Less expensive and time-consuming than fabricating brackets or cutting wood blocks
- Can be nailed or screwed to wood or metal studs
- 24-Gauge
- Simple installation
For use in standard clamp applications. Fits pipe and hose. 300 Series stainless steel band and housing with a carbon steel zinc plated slotted hex head screw. Industrial worm-drive hose clamp with arcial perforations for added strength.
- For use in standard clamp applications
- Fits pipe and hose
- 300-series stainless steel band and housing with a carbon steel zinc plated slotted hex head screw
- Industrial worm-drive hose clamp with arcial perforations for added strength
- 10-per box
- Note: when choosing a clamp, measure the outside diameter of your hose or tube with the fitting installed
The ApolloPEX 1/2 in. PEX Pipe J-Hook Pipe Support (10-Pack) is simple to install and features a collar design for the securing of PEX pipe to joists or studs. The ApolloPEX system is a comprehensive piping system comprised of brass fittings, poly alloy fittings, manifolds, valves, fasteners, tools and tubing. It is designed for implementation in water delivery systems, simple or complex.
- Constructed of durable plastic for superior reliability and strength
- Collar design holds PEX tubing in place
- Use with PEX tubing (not included)
- For use with 1/2 in. pipe
- Includes 10 clamps
Oatey Standard Pipe Clamps are designed for use with copper, PEX or CPVC piping. Available in a variety of sizes, these pipe clamps allow for the pipe to be flush mounted to walls and joists and feature a ribbed design that allows the pipe to cool faster and expand or contract freely. Pipe clamps are made of high-impact polypropylene and can be used with hydronic heating systems. A pre-loaded nail provides fast and easy installation. Oatey products have earned the trust of plumbing professionals for over 100 years.
- 3/4 in. standard pipe clamp
- For use with copper, CPVC and PEX piping
- Secures tube to mounting surface
- Pre-loaded nail provides fast and easy installation
- Clamp isolates pipe from stud and reduces noise
- Fits 3/4 in. pipes
- Ribbed design allows pipe to cool faster and expand/contract freely
- Made of high-impact polypropylene
- Can be used on hydronic systems
- 0-160°F temperature range
For use in standard clamp applications. Fits pipe and hose. 300 Series stainless steel band and housing with a carbon steel zinc plated slotted hex head screw. Industrial worm-drive hose clamp with arcial perforations for added strength.
- For use in standard clamp applications
- Fits pipe and hose
- 300-series stainless steel band and housing with a carbon steel zinc plated slotted hex head screw
- Industrial worm-drive hose clamp with arcial perforations for added strength
- 10-per box
- Note: when choosing a clamp, measure the outside diameter of your hose or tube with the fitting installed
Holdrite 250-H variable closure clamps are specifically engineered to dampen noise transfer between piping and building structures. Independent lab tests verify that the 250-H provide superior protection against plumbing noise disturbances. This product has been lab tested by an independent third-party to compare the relative noise level performance. ISO-3822 tested.
- Ideal for sound-rated and isolation applications
- Compatible with copper, PEX, CPVC, iron pipe and other pipe materials
- Variable closure clamp mounts directly to SB1S-H and SB2S-H
- Supports up to 1 in. pipe sizes with load ratings up to 200 lbs.
The HOLDRITE 103-26 is a 14-Gauge galvanized steel bracket with 1-3/8 in. keyed holes on 2 in. centers. Positions 1/2 in., 3/4 in. or 1 in. copper or CPVC tubing and 3/8 in. or 1/2 in. PEX. This versatile bracket should be used with HOLDRITE inserts.
- Galvanized steel bracket with 1-3/8 in. keyed holes on 2 in. centers
- Versatile bracket ideal for sink, lavatory and toilet plumbing solutions
- Integrates with HOLDRITE clamps #701 and #704 with patented connection
- Positions 1/2 in., 3/4 in. or 1 in. copper or CPVC tubing and 3/8 in. or 1/2 in. PEX
- 25 lbs. load rating
- UPC/IPC/IAPMO Listed
Popularly known as the Greenfied hanger, this plastic coated DWV hanger supports runs of PVC or pipe. Manufactured in sizes from 1.5 in. to 6 in. IPS. Key hole fastener allows for easy installation. 12 in. Perforated leg facilitates installation of pitched pipe runs.
- Galvanized steel material
- 16-Gauge steel
- 3/4 in. wide
- Plastic coated
- For 3 in. iron pipe size
- Also available without plastic coating
- For Underground Water Piping
- For Use On 1/2", 3/4" and 1" Cpvc, Copper Pex Or Poly Tubing
- 6 Mil X 200 Foot Rolls
This item is designed for the support of non-insulated copper tubing lines. The MT-718 is furnished tapped for bolt thread and is used with the MT-742-R ceiling plate. This is also available in a 2 bolt design.
- Tube size 1 in.
- Rod size 3/8 in.
- Copper plated
- Malleable iron
- Designed for the support of non-insulated copper tubing lines
- Used with the MT-742-R ceiling plate
For use in standard clamp applications. Fits pipe and hose. 300 Series stainless steel band and housing with a carbon steel zinc plated slotted hex head screw. Industrial worm-drive hose clamp with arcial perforations for added strength.
- For use in standard clamp applications
- Fits pipe and hose
- 300-series stainless steel band and housing with a carbon steel zinc plated slotted hex head screw
- Industrial worm-drive hose clamp with arcial perforations for added strength
- 10-per box
- Note: when choosing a clamp, measure the outside diameter of your hose or tube with the fitting installed
Support HVAC or pipe runs with perforated metal hanger strap. You can hang insulated flexible duct, round pipe or rectangular duct with this perforated strapping. This durable, galvanized steel strap is easy to install and is 10 ft. L. Easily cut to desired length for a variety of plumbing and HVAC applications.
- Galvanized steel material
- 24-Gauge steel
- Bolt holes
- 0.75 wide
- 70# max static working load
2 hole pipe straps used to attach vertical or horizontal runs of PVC or iron pipe. Snap on feature facilities fast and easy installation. The strap is constructed of galvanized steel. Manufactured in Pennsylvania.
- Galvanized steel material
- Snap on feature facilities fast and easy installation
- For 1.5 in. IPS
- 1.0 in. W
- 19-Gauge steel
- Made in Pennsylvania
For use in standard clamp applications. Fits pipe and hose. 300 Series stainless steel band and housing with a carbon steel zinc plated slotted hex head screw. Industrial worm-drive hose clamp with arcial perforations for added strength.
- For use in standard clamp applications
- Fits pipe and hose
- 300-series stainless steel band and housing with a carbon steel zinc plated slotted hex head screw
- Industrial worm-drive hose clamp with arcial perforations for added strength
- 10-per box
- Note: when choosing a clamp, measure the outside diameter of your hose or tube with the fitting installed
1/2" Band with Arcial Perforations. Quadra-Lock Construction. SAE Standard J1508 Type F
- For use in high corrosion, marine and underground applications
- 300 series stainless steel band and housing
- Industrial worm-drive hose clamp with arcial perforations for added strength
- 10 per box
- Suitable for connections between 0.5625 in. and 1.0625 in.
- Note: when choosing a clamp, measure the outside diameter of your hose or tube with the fitting installed
Oatey Half Clamp Pipe Clamps with Nails are designed for securing copper, PEX and CPVC piping to mounting surfaces. Made of corrosion resistant polypropylene, these pipe support clamps feature a pre-loaded, rust resistant nail for easy installation and a ribbed design for noise reduction. Oatey products have earned the trust of plumbing professionals for over 100 years.
- 1/2 in. half pipe clamp with nail
- Ideal for securing tubes to mounting surfaces
- For use with copper, PEX and CPVC piping
- Pre-loaded, rust resistant nail provides fast and easy installation
- Ribbed design insulates against water line noise
- Fits 1/2 in. pipes
- Made of corrosion resistant polypropylene
- Can be used on hydronic systems
The 1 in. Universal Clamp is designed for use with RIGID and IMC conduit, pipe and EMT conduit. It is made with metal and has an electroplated zinc finish for added strength. Its straps are interchangeable with 1 in. strut for broader application and the bolt has a combination hex and slot head for easier tightening.
- Clamps 1 in. conduit for ceiling suspension
- Gold-galvanized steel construction
- Compatible with 12-Gauge or 14-Gauge metal framing channel
- 550 lbs. load rating
- OSHA compliant
Sioux Chief Zip Stick Universal Pipe Hanger shall be used where necessary to support DWV piping according to all national code requirements. Hanger shall feature I-beam stem design for strength and rigidity and a high heat strap with releasable locking mechanism. Hanger shall be noncorrosive and UV-resistant. Hanger shall be impact resistant to 0 degree F, and be able to withstand temperatures up to 140 degree F. Hanger shall include 2 pre-loaded zinc plated, rust resistant nails. Nails shall have a continuous rink shank to provide a more permanent installation. Hanger stem may be snapped off or cut to create a shorter stem in tight spaces.
- Perfect for hanging DWV
- Perfect for hanging wrapped or insulated pipe
- Perfect for hanging bundles of PEX
- Good for supporting vent pipe in attics
- Releasable locking mechanism
- Graduated numerals at nail ways for easy measuring
Ensure pipes are securely installed while reducing irritating pipe noise with Water-Tite Plastic Insulating Suspension Clamps. Designed to support copper, PEX, and especially CPVC tubing, these plastic clamps isolate piping from wood framing and minimize the noise made from pipe expansion and contraction. These rugged tube suspension clamps are impact resistant to 0 degrees Fahrenheit (-18 degrees Celsius) and are capable of withstanding continuous maximum temperatures of up to 160 degrees Fahrenheit (71 degrees Celsius). They are available in a variety of sizes to fit piping ranging from 1/2 to 2 inches.
- Plastic insulating suspension clamp for all CTS (copper tube size) tubing
- Reduces noise from tubing expansion and contraction
- Ideal for isolating CPVC piping from wood
- Impact resistant to 0 degree F (-18 degree C); maximum temperature (continuous) of 160 degree F (71 degree C)
- Available in a variety of sizes to fit piping between 1/2 and 2 inches
- Combination clamp
Oatey Plastic Hanger Straps are available in a variety of lengths and offer a quick and inexpensive way to hang PVC, ABS, galvanized, black iron or cast iron piping from joists or rafters. Made of durable polyethylene, these hanger straps are both non-corrosive and non-conductive and feature 1/8 in. nail holes spaced 3/4 in. apart for easy installation. Oatey products have earned the trust of plumbing professionals for over 100-years.
- Plastic hanger strap
- Used to hang pipe from joists or rafters
- Made of non-corrosive, non-conductive polyethylene
- For use with copper, PVC, ABS, galvanized, black iron and cast iron piping
- 3/4 in. width, 100 ft. length
- Strap features 1/8 in. nail holes spaced 3/4 in. apart
- Rigorously tested and proven to last in many conditions
- Flexible and easy to work with