Use the 2 in. ABS DWV 45 degree Hub x Hub Elbow to complete the installation of your DWV system. This fitting features ABS construction and redirects ABS piping (not included) 45 degree s. ABS DWV is joined by solvent cementing or threading and can easily be connected to steel, copper, or cast iron through the use of transition fittings.

• 2 in. Inside Diameter and 2.125 in. Outside Diameter
• ABS construction
• For use with DWV piping systems
• Helps air circulate
• Redirects ABS piping (not included) 45 degree
• Solvent weld connections
• Never use a primer with ABS
• Maximum working pressure of 5 psi
• "2 I.D. and 2.125 O.D."

The NIBCO ABS DWV 45-degree street elbow is used in residential and commercial drain, waste and vent systems. Complete the installation of your DWV system with the NIBCO ABS DWV 45-Degree Spigot x Hub Street Elbow. This ABS fitting welds to pipe with a solvent and changes the direction of piping 45 degrees.

• 2 in. Inside Diameter and 2.125 in. Outside Diameter
• ABS construction
• For use with DWV systems to help remove wastewater from plumbing fixtures
• Helps air circulate in drainage piping
• Changes the direction of piping 45 degree
• Solvent weld connections
• Never use a primer with ABS
• Maximum working pressure of 5 psi
• Made in USA

With the NIBCO 2 in. ABS DWV 90 degree Hub x Hub Elbow, you can complete the installation of your DWV system. The fitting features ABS construction and changes the direction of piping by 90 degree s. ABS DWV is joined by solvent cementing or threading and can easily be connected to steel, copper, or cast iron through the use of transition fittings.

• 2 in. Inside Diameter and 2.125 in. Outside Diameter
• ABS construction
• For use with DWV systems to help remove wastewater from plumbing fixtures
• Helps air circulate in drainage piping
• Changes the direction of piping by 90 degree
• Solvent weld connections
• Never use a primer with ABS
• Maximum working pressure of 5 psi

The 2 in. ABS DWV 90-Degree Hub x Hub Long-Turn Elbow is built for use with non-pressurized DWV systems to help remove wastewater from plumbing fixtures. The fitting features an ABS construction. ABS is lightweight, safe to handle and easy to install. ABS DWV is joined by solvent cementing or threading and can easily be connected to steel, copper, or cast iron through the use of transition fittings.

• 2 in. Inside Diameter and 2.125 in. Outside Diameter
• ABS construction
• For use with non-pressurized DWV systems to help remove wastewater from plumbing fixtures
• Helps air circulate in drainage piping
• Changes the direction of piping 90 degree
• Solvent weld connections
• Never use a primer with ABS
• Long-turn design
• Maximum working pressure of 5 psi

Use the NIBCO 1-1/2 in. ABS DWV 90 degree Hub x Hub Elbow with your DWV system to help remove wastewater from plumbing fixtures. The fitting features ABS construction, and it changes the direction of ABS piping 90 degree . ABS is lightweight, safe to handle and easy to install. ABS DWV is joined by solvent cementing or threading and can easily be connected to steel, copper, or cast iron through the use of transition fittings.

• ABS construction
• For use with DWV systems to help remove wastewater from plumbing fixtures
• Helps air circulate in drainage piping
• Changes the direction of ABS piping 90 degree
• Solvent weld connections
• Never use a primer with ABS
• Maximum working pressure of 5 psi

The NIBCO ABS DWV 22-1/2-degree elbow is used in residential and commercial drain, waste and vent systems. The ABS DWV 22-1/2-degree elbow features a hub x hub connection and is used to change the direction of flow. Please refer to NIBCO technical data sheets and catalogs for engineering and installation information. Acrylonitrile-Butadiene-Styrene (ABS) is resistant to a wide variety of materials ranging from sewage to commercial household chemical formulations and can be exposed to a wide temperature span. ABS is lightweight, safe to handle and easy to install. ABS DWV is joined by solvent cementing or threading and can easily be connected to steel, copper, or cast iron through the use of transition fittings. NIBCO plastic fittings are backed by a 5-year limited warranty. Because of its longstanding reputation for innovation and precision in design and manufacturing, NIBCO is the preferred brand in the industry.

• Service temperature -40°F to 180°F
• Do not test or use with compressed air or other gases
• ASTM D2665 & D3965
• ASTM D2661 and D3311
• UL Listed 94V-0
• NSF/ANSI Standard 14
• Size range 1-1/2" to 6"

The ABS DWV 90 degree elbow features a hub x hub connection and is used to change the direction of flow. Please refer to NIBCO technical data sheets and catalogs for engineering and installation information. Acrylonitrile-Butadiene-Styrene (ABS) is resistant to a wide variety of materials ranging from sewage to commercial household chemical formulations and can be exposed to a wide temperature span. ABS DWV is joined by solvent cementing or threading and can easily be connected to steel, copper, or cast iron using transition fittings.

• ABS construction
• For use with drain, waste and vent systems to help remove wastewater from plumbing fixtures
• Solvent welded connections
• Never use a primer with ABS
• Maximum working pressure of 5 psi
• NSF/ANSI standard 14
• UL Listed 94V-0

Change the direction of piping 45 degree s with the 1-1/2 in. ABS DWV 45 degree Hub x Hub Elbow. The ABS DWV 45 degree elbow features a hub x hub connection and is used to change the direction of flow. Acrylonitrile-Butadiene-Styrene (ABS) is resistant to a wide variety of materials ranging from sewage to commercial household chemical formulations and can be exposed to a wide temperature span.

• ABS construction
• For use with DWV systems to help remove wastewater from plumbing fixtures
• Helps air circulate in drainage piping
• Changes the direction of piping 45 degree
• Solvent weld connections
• Never use a primer with ABS
• Maximum working pressure of 5 psi

The ABS DWV 45 degree street elbow features a spigot x hub connection and is used to change the direction of flow. Acrylonitrile-Butadiene-Styrene (ABS) is resistant to a wide variety of materials ranging from sewage to commercial household chemical formulations and can be exposed to a wide temperature span. ABS DWV is joined by solvent cementing or threading and can easily be connected to steel, copper, or cast iron through the use of transition fittings.

• 11/2 in. Inside Diameter and 1.625 in. Outside Diameter
• ABS construction
• For use with DWV systems to help remove wastewater from plumbing fixtures
• Helps circulate air in drainage piping
• Redirects piping 45 degree
• Solvent weld connections
• Never use a primer with ABS
• Maximum working pressure of 5 psi
• "11/2 I.D. and 1.625 O.D."

The ABS DWV 90 degree vent elbow features a hub x hub connection and the abrupt 90 degree angle is used to change the direction of flow in the venting side of the system. Used in residential and commercial drain, waste and vent systems. Acrylonitrile-Butadiene-Styrene (ABS) is resistant to a wide variety of materials ranging from sewage to commercial household chemical formulations and can be exposed to a wide temperature span.

• 2 in. Inside Diameter and 2.125 in. Outside Diameter
• ABS construction
• For use with drain, waste and vent systems to help remove wastewater from plumbing fixtures
• Helps air circulate in drainage piping
• Solvent welded connections
• Never use a primer with ABS
• Maximum working pressure of 5 psi
• "2 I.D. and 2.125 O.D."

Use the NIBCO 3 in. ABS DWV 45-Degree Spigot x Hub Street Elbow to change the direction of ABS piping by 45 degrees. The fitting is designed for use in DWV systems to help remove wastewater from plumbing fixtures. ABS DWV is joined by solvent cementing or threading and can easily be connected to steel, copper, or cast iron through the use of transition fittings.

• 3 in. Inside Diameter and 3.125 in. Outside Diameter
• ABS construction
• For use with DWV systems to help remove wastewater from plumbing fixtures
• Helps air circulate in drainage piping
• Changes the direction of ABS piping by 45 degree
• Solvent-welded connections
• Never use a primer with ABS
• Maximum working pressure of 5 psi
• "3 I.D. and 3.125 O.D."

The NIBCO 3 in. ABS DWV 90 degree long turn elbow features a hub x hub connection and long radius and is used to change the direction of flow. Acrylonitrile-Butadiene-Styrene (ABS) is resistant to a wide variety of materials ranging from sewage to commercial household chemical formulations and can be exposed to a wide temperature span. ABS is lightweight, safe to handle and easy to install. ABS DWV is joined by solvent cementing or threading and can easily be connected to steel, copper, or cast iron through the use of transition fittings. NIBCO plastic fittings are backed by a 5-year limited warranty.

• 3 in. Inside Diameter and 3.125 in. Outside Diameter
• ABS construction
• For use with DWV systems to help remove wastewater from plumbing fixtures
• Helps air circulate in drainage piping
• Changes the direction of abs piping 90 degree
• Solvent welded connections
• Never use a primer with ABS
• Long-turn design
• Maximum working pressure of 5 psi
• ASTM D2665
• ASTM D2665
• ASTM D3965
• ASTM D2661 and D3311

The NIBCO 3 in. ABS DWV 45 degree Hub x Hub Elbow is built for use with DWV systems to help remove wastewater from plumbing fixtures. The ABS fitting bends at a 45 degree angle to change the direction of piping.

• 3 in. Inside Diameter and 3.125 in. Outside Diameter
• ABS construction
• For use with DWV systems to help remove wastewater from plumbing fixtures
• Changes the direction of piping 45 degree
• Solvent weld connections
• Never use a primer with ABS
• Maximum working pressure of 5 psi
• "3 I.D. and 3.125 O.D."

The NIBCO 1-1/2 ABS DWV 90 degree Hub x Hub Elbow is built for use with non-pressurized DWV systems to help remove wastewater from plumbing fixtures. The fitting features an ABS construction and a long-turn design. ABS is lightweight, safe to handle and easy to install.

• 11/2 in. Inside Diameter and 1.625 in. Outside Diameter
• ABS construction
• For use with non-pressurized DWV systems to help remove wastewater from plumbing fixtures
• Helps air circulate in drainage piping
• Changes the direction of piping 90 degree
• Solvent weld connections
• Never use a primer with ABS
• Long-turn design
• Maximum working pressure of 5 psi

Use the NIBCO 1-1/2 in. ABS DWV 90 degree Hub x Hub Vent Elbow with non-pressurized drain, waste and vent systems to help remove wastewater from plumbing fixtures. The fitting features an ABS construction. The ABS DWV 90 degree vent elbow features a hub x hub connection and the abrupt 90 degree angle is used to change the direction of flow in the venting side of the system. Acrylonitrile-Butadiene-Styrene (ABS) is resistant to a wide variety of materials ranging from sewage to commercial household chemical formulations and can be exposed to a wide temperature span.

• 11/2 in. Inside Diameter and 1.625 in. Outside Diameter
• ABS construction
• For use with drain, waste and vent systems
• Helps air circulate in drainage piping
• Solvent weld connections
• Never use a primer with ABS
• Maximum working pressure of 5 psi

With the NIBCO 3 in. ABS DWV 22-1/2 degree Hub x Hub Elbow. you can complete the installation of your DWV system. This fitting subtly changes the direction of ABS piping 22-1/2 degree s.

• 3 in. Inside Diameter and 3.125 in. Outside Diameter
• ABS construction
• For use with DWV systems to help remove wastewater from plumbing fixtures
• Helps air circulate in drainage piping
• Changes the direction of piping 22-1/2 degree
• Solvent welded connections
• Never use a primer with ABS
• Maximum working pressure of 5 psi
• "3 I.D. and 3.125 O.D."

Change the direction of your ABS piping with the NIBCO 4 in. ABS DWV 45-Degree Hub x Hub Elbow. The fitting is designed for use in DWV systems, and its ABS construction helps air circulate in drainage piping. ABS DWV is joined by solvent cementing or threading and can easily be connected to steel, copper, or cast iron through the use of transition fittings.

• 4 in. Inside Diameter and 4.125 in. Outside Diameter
• ABS construction
• For use with DWV systems to help remove wastewater from plumbing fixtures
• Helps air circulate in drain piping
• Changes the direction of piping 45 degree
• Solvent weld connections
• Never use a primer with ABS
• Maximum working pressure of 5 psi
• "4 I.D. and 4.125 O.D."

The ABS DWV 22-1/2 elbow features a spigot x hub connection and is used to change the direction of flow. Acrylonitrile-Butadiene-Styrene (ABS) is resistant to a wide variety of materials ranging from sewage to commercial household chemical formulations and can be exposed to a wide temperature span. ABS DWV is joined by solvent cementing or threading and can easily be connected to steel, copper, or cast iron using transition fittings.

• 2 in. Inside Diameter and 2.125 in. Outside Diameter
• ABS construction
• For use with DWV systems to help remove wastewater from plumbing fixtures
• Changes the direction of piping 22-1/2 degree
• Never use a primer with ABS
• Maximum working pressure of 5 psi
• NSF/ANSI standard 14
• UL listed 94V-0
• "2 I.D. and 2.125 O.D."

Use the NIBCO 3 in. ABS DWV 22-1/2 SPG x Hub Street Elbow to adapt ABS piping to cast iron. The ABS DWV 22-1/2 degree elbow features a spigot x hub connection and is used to change the direction of flow. Acrylonitrile-Butadiene-Styrene (ABS) is resistant to a wide variety of materials ranging from sewage to commercial household chemical formulations and can be exposed to a wide temperature span.

• 3 in. Inside Diameter and 3.125 in. Outside Diameter
• ABS construction
• For use in drain, waste and vent systems to help remove wastewater from plumbing fixtures
• Adapts ABS piping to cast iron using solvent welded connections
• Never use a primer with ABS
• Maximum working pressure of 5 psi
• NSF/ANSI standard 14
• UL listed 94V-0
• "3 I.D. and 3.125 O.D."

The NIBCO 1-1/2 in. ABS DWV 22-1/2 degree Hub x Hub Elbow is built for use with DWV systems. Use the ABS fitting to redirect piping 22-1/2 degree s.

• 11/2 in. Inside Diameter and 1.625 in. Outside Diameter
• ABS construction
• For use with DWV systems to help remove wastewater from plumbing fixtures
• Helps air circulate in drainage piping
• Changes the direction of piping 22-1/2 degree
• Solvent welded connections
• Never use a primer with ABS
• Maximum working pressure of 5 psi
• "11/2 I.D. and 1.625 O.D."

Use the NIBCO 1-1/2 in. ABS DWV 90-Degree Spigot x Hub Street Elbow to complete the installation of your DWV system. The fitting features an ABS construction, which helps air circulate in piping. ABS DWV is joined by solvent cementing or threading and can easily be connected to steel, copper, or cast iron through the use of transition fittings.

• 11/2 in. Inside Diameter and 1.625 in. Outside Diameter
• ABS construction
• For use with non-pressurized DWV systems to help remove wastewater from plumbing fixtures
• Helps air circulate in drainage piping
• Changes the direction of ABS piping 90 degree
• Solvent welded connections
• Never use a primer with ABS
• Maximum working pressure of 5 psi
• "11/2 I.D. and 1.625 O.D."

With the NIBCO 3 in. ABS DWV 90-Degree Spigot x Hub Street Elbow, you can change the direction of ABS piping 90 degrees. The fitting is built for use with DWV systems to help remove wastewater from plumbing fixtures. ABS is easy to install.

• 3 in. Inside Diameter and 3.125 in. Outside Diameter
• ABS construction
• For use with DWV systems to help remove wastewater from plumbing fixtures
• Helps air circulate in drainage piping
• Changes the direction of ABS piping 90 degree
• Solvent welded connections
• Never use a primer with ABS
• Maximum working pressure of 5 psi
• NSF/ANSI Standard 14

Use the NIBCO 1-1/2 in. ABS DWV 22-1/2-Degree Spigot x Hub Elbow to subtly change the direction of ABS piping 22-1/2 degrees. The fitting features an ABS construction and is designed for use with DWV systems. BS DWV is joined by solvent cementing or threading and can easily be connected to steel, copper, or cast iron through the use of transition fittings.

• 11/2 in. Inside Diameter and 1.625 in. Outside Diameter
• ABS construction
• Use with non-pressurized DWV systems to help remove wastewater from plumbing systems
• Helps air circulate in drainage piping
• Changes the direction of ABS piping 22-1/2 degree
• Solvent welded connections
• Never use a primer with ABS
• Maximum working pressure of 5 psi
• "11/2 I.D. and 1.625 O.D."

The NIBCO 4 in. ABS DWV 45-Degree Spigot x Hub Street Elbow is built for use with DWV systems to help remove wastewater from plumbing fixtures. The fitting features ABS construction. ABS DWV is joined by solvent cementing or threading and can easily be connected to steel, copper, or cast iron through the use of transition fittings.

• 4 in. Inside Diameter and 4.125 in. Outside Diameter
• ABS construction
• For use with DWV systems to help remove wastewater from plumbing fixtures
• Helps air circulate in drainage piping
• Solvent weld connections
• Never use a primer with ABS
• Maximum working pressure of 5 psi
• "4 I.D. and 4.125 O.D."