Get a temporary cap for your sanitary vent and drainage pipe system with the NIBCO 2 in. ABS DWV MIPT Cleanout Plug. The plug is used with an ABS cleanout fitting (sold separately). ABS is lightweight, safe to handle and easy to install.

• 2 in. Inside Diameter and 2.125 in. Outside Diameter
• ABS should never be used with a primer
• Use in conjunction with an ABS cleanout fitting (sold separately)
• Temporarily caps the system
• Suitable for use in non-pressurized sanitary drain, waste and vent applications
• MIPT connection
• Maximum working pressure of 5 psi
• "2 I.D. and 2.125 O.D."

The NIBCO 3 in. ABS DWV cap is used in residential and commercial drain, waste and vent systems. The ABS DWV cap features a hub connection to fit over the end of a pipe to create a seal. Acrylonitrile-Butadiene-Styrene (ABS) is resistant to a wide variety of materials ranging from sewage to commercial household chemical formulations and can be exposed to a wide temperature span. ABS is lightweight, safe to handle and easy to install.

• Made of ABS (black plastic)
• NSF/ANSI standard 14
• Size range 1-1/4 in. to 6 in.
• Connected with solvent welds
• ABS is an excellent high strength thermoplastic
• Meets ASTM D 2661 and D 3311
• UL listed 94V-0
• "3 I.D. and 3.125 O.D."

The NIBCO 3 in. ABS DWV plug is used in residential and commercial drain, waste and vent systems. The ABS DWV plug features a male NPT thread connection to fit inside a fitting to seal the end of a pipe line or a location where future additions may be made to the piping system. Acrylonitrile-Butadiene-Styrene (ABS) is resistant to a wide variety of materials ranging from sewage to commercial household chemical formulations and can be exposed to a wide temperature span. ABS is lightweight, safe to handle and easy to install. ABS DWV is joined by solvent cementing or threading and can easily be connected to steel, copper, or cast iron through the use of transition fittings.

• 3 in. Inside Diameter and 3.125 in. Outside Diameter
• ABS should never be used with a primer
• Use in conjunction with an ABS cleanout fitting (sold separately)
• Temporarily caps the system
• Suitable for use in non-pressurized sanitary drain, waste and vent applications
• MIPT connection
• Maximum working pressure of 5 psi
• "3 I.D. and 3.125 O.D."

The NIBCO 1-1/2 in. ABS DWV MIPT Cleanout Plug is designed to act as a temporary cap for sanitary drainage and vent piping systems. The plug is used with an ABS cleanout fitting (sold separately). ABS is lightweight, safe to handle and easy to install. ABS DWV is joined by solvent cementing or threading and can easily be connected to steel, copper, or cast iron through the use of transition fittings.

• 11/2 in. Inside Diameter and 1.625 in. Outside Diameter
• ABS should never be used with a primer
• Use in conjunction with an ABS cleanout fitting (sold separately)
• Temporarily caps the system
• Suitable for use in non-pressurized sanitary drain, waste and vent applications
• MIPT connection
• Maximum working pressure of 5 psi
• "11/2 I.D. and 1.625 O.D."

The NIBCO 2 in. ABS DWV cap is used in residential and commercial drain, waste and vent systems. The ABS DWV cap features a hub connection to fit over the end of a pipe to create a seal. ABS is lightweight, safe to handle and easy to install.

• Made of ABS (black plastic)
• Permanently caps 2 in. Dia ABS drain, waste and vent pipe for non-pressurized sanitary systems
• Connections are solvent welded
• ABS DWV is joined by solvent cementing or threading
• Service temperature of -40 degrees Fahrenheit to 108 degrees Fahrenheit
• Do not test or use with compressed air or other gases
• "2.385 I.D. and 2.73 O.D."
• "2 I.D. and 2.125 O.D."

The NIBCO 4 in. ABS DWV MIPT Cleanout Plug is designed for use in sanitary drainage and vent piping systems with an ABS cleanout fitting (sold separately). The plug acts as a temporary system cap. ABS is lightweight, safe to handle and easy to install. ABS DWV is joined by solvent cementing or threading and can easily be connected to steel, copper, or cast iron through the use of transition fittings.

• 4 in. Inside Diameter and 4.125 in. Outside Diameter
• ABS should never be used with a primer
• Use in conjunction with an ABS cleanout fitting (sold separately)
• Temporarily caps the system
• Suitable for use in non-pressurized sanitary drain, waste and vent applications
• MIPT connection
• Maximum working pressure of 5 psi

The NIBCO 1-1/2 in. ABS DWV cap is used in residential and commercial drain, waste and vent systems. The ABS DWV cap features a hub connection to fit over the end of a pipe to create a seal. Acrylonitrile-Butadiene-Styrene (ABS) is resistant to a wide variety of materials ranging from sewage to commercial household chemical formulations and can be exposed to a wide temperature span.

• Made of ABS (black plastic)
• Permanently caps 1-1/2 in. Dia ABS drain, waste and vent pipe for non-pressurized sanitary systems
• Connections are solvent welded
• Not for use with primer
• Service temperature of -40 degree F to 108 degree F
• Do not test or use with compressed air or other gases

The NIBCO 4 in. ABS DWV cap is used in residential and commercial drain, waste and vent systems. The ABS DWV cap features a hub connection to fit over the end of a pipe to create a seal. Acrylonitrile-Butadiene-Styrene (ABS) is resistant to a wide variety of materials ranging from sewage to commercial household chemical formulations and can be exposed to a wide temperature span.

• 4 in. Inside Diameter and 4.125 in. Outside Diameter
• ABS are lightweight, safe to handle and easy to install
• ABS DWV can easily be connected to steel, copper or cast iron through the use of transition fittings
• Not for use with primer
• Connected with solvent welds
• Service temperature of -40 degree F to 180 degree F
• Do not test or use with compressed air or other gases
• NSF/ANSI standard 14
• UL listed 94V-0