The 2 in. ABS DWV 90-Degree Hub x Hub Long-Turn Elbow is built for use with non-pressurized DWV systems to help remove wastewater from plumbing fixtures. The fitting features an ABS construction. ABS is lightweight, safe to handle and easy to install. ABS DWV is joined by solvent cementing or threading and can easily be connected to steel, copper, or cast iron through the use of transition fittings.

• 2 in. Inside Diameter and 2.125 in. Outside Diameter
• ABS construction
• For use with non-pressurized DWV systems to help remove wastewater from plumbing fixtures
• Helps air circulate in drainage piping
• Changes the direction of piping 90 degree
• Solvent weld connections
• Never use a primer with ABS
• Long-turn design
• Maximum working pressure of 5 psi

Use the 2 in. ABS DWV 45 degree Hub x Hub Elbow to complete the installation of your DWV system. This fitting features ABS construction and redirects ABS piping (not included) 45 degree s. ABS DWV is joined by solvent cementing or threading and can easily be connected to steel, copper, or cast iron through the use of transition fittings.

• 2 in. Inside Diameter and 2.125 in. Outside Diameter
• ABS construction
• For use with DWV piping systems
• Helps air circulate
• Redirects ABS piping (not included) 45 degree
• Solvent weld connections
• Never use a primer with ABS
• Maximum working pressure of 5 psi
• "2 I.D. and 2.125 O.D."

The Water-Tite Techno Flange PVC Standard Pattern Closet Flange with Techno Knockout features a unique inset test cap that cannot be damaged by construction equipment, ensuring drain lines stay securely covered until installation and DWV (drain, waste, and vent) testing are complete. The Techno Knockout is specially designed to break out in one piece and will not fall down the drain line while it is being removed. Compatible with both 3- and 4-inch Schedule 40 DWV pipe, this toilet flange has a Flush-Tite design that allows for flush installation inside of 4-inch pipe. It also features a beveled hum, which makes it easier to insert into 4-inch foam-core pipe. The Techno Flange PVC Standard Pattern Closet Flange includes a durable stainless-steel ring that makes it easy to align bolts and screws, speeding up installation.

• PVC closet flange with inset test cap that cannot be damaged by construction equipment
• Techno flange knockout breaks out in one piece and will not fall down the drain
• Beveled hub design allows easier insertion into 4-inch foam-core pipe
• Stainless-steel ring for easy alignment of bolts and screws
• Fits 3- and 4-inch PVC Schedule 40 DWV (drain, waste, and vent) pipe
• Closet flange

Connect lengths of ABS piping with the NIBCO 3 in. ABS DWV H x H Coupling. The ABS DWV coupling features a hub x hub connection and connects ABS DWV piping lengths with solvent weld connections. Acrylonitrile-Butadiene-Styrene (ABS) is resistant to a wide variety of materials ranging from sewage to commercial household chemical formulations and can be exposed to a wide temperature span.

• 3 in. Inside Diameter and 3.125 in. Outside Diameter
• ABS construction
• Use with drain, waste and vent systems to help remove wastewater from plumbing fixtures
• Connects lengths of ABS piping
• Solvent weld connections
• Not for use with a primer
• Maximum working pressure of 5 psi

The NIBCO 3 in. x 2 in. ABS DWV flush bushing is used in residential and commercial drain, waste and vent systems. The ABS DWV flush bushing features a spigot x hub connection and provides a means for reducing the size of the line. Acrylonitrile-Butadiene-Styrene (ABS) is resistant to a wide variety of materials ranging from sewage to commercial household chemical formulations and can be exposed to a wide temperature span. ABS is lightweight, safe to handle and easy to install. ABS DWV is joined by solvent cementing or threading and can easily be connected to steel, copper, or cast iron through the use of transition fittings.

• ABS construction
• For non-pressurized sanitary drain, waste and vent systems
• Used to reduce pipe size by inserting into ABS sitting hub
• SPG x H connection type
• Solvent welded connection
• 5 psi maximum working pressure
• UL Listed 94V-0

The NIBCO ABS DWV 45-degree wye is used in residential and commercial drain, waste and vent systems. The ABS DWV 45-degree wye features a hub x hub x hub connection and allows for a connection to be made in continuous pipe line and branch out to a different direction. Acrylonitrile-Butadiene-Styrene (ABS) is resistant to a wide variety of materials ranging from sewage to commercial household chemical formulations and can be exposed to a wide temperature span.

• 3 in. Inside Diameter and 3.125 in. Outside Diameter
• Made of ABS
• Connects a branch line into a horizontal ABS drain line
• Solvent-welded connections
• Not for use with primer
• NSF/ANSI Standard 14
• UL Listed 94V-0
• "3 I.D. and 3.125 O.D."

The NIBCO ABS DWV 45-degree street elbow is used in residential and commercial drain, waste and vent systems. Complete the installation of your DWV system with the NIBCO ABS DWV 45-Degree Spigot x Hub Street Elbow. This ABS fitting welds to pipe with a solvent and changes the direction of piping 45 degrees.

• 2 in. Inside Diameter and 2.125 in. Outside Diameter
• ABS construction
• For use with DWV systems to help remove wastewater from plumbing fixtures
• Helps air circulate in drainage piping
• Changes the direction of piping 45 degree
• Solvent weld connections
• Never use a primer with ABS
• Maximum working pressure of 5 psi
• Made in USA

Use the NIBCO 2 in. x 1-1/2 in. ABS DWV Hub x Hub Reducing Coupling to join 2 lengths of pipe that differ in size. The durable fitting features ABS construction. ABS DWV is joined by solvent cementing or threading and can easily be connected to steel, copper, or cast iron through the use of transition fittings.

• 2 X 11/2 in. Inside Diameter and 2 1/8 x 1 5/8 in. Outside Diameter
• ABS construction for durability
• Connects lengths of pipe of 2 different sizes
• For use with DWV piping systems
• Not for use with primer
• Solvent weld connections
• Helps air circulate in piping
• Maximum working pressure of 5 psi

The NIBCO 2 in. ABS DWV coupling features a hub x hub connection and connects ABS DWV piping lengths with solvent weld connections. Acrylonitrile-Butadiene-Styrene (ABS) is resistant to a wide variety of materials ranging from sewage to commercial household chemical formulations and can be exposed to a wide temperature span. ABS is lightweight, safe to handle and easy to install. ABS DWV is joined by solvent cementing or threading and can easily be connected to steel, copper or cast iron through the use of transition fittings. The NIBCO ABS DWV coupling is used in residential and commercial drain, waste and vent systems.

• 2 in. Inside Diameter and 2.125 in. Outside Diameter
• ABS construction
• For use with DWV systems to help remove wastewater from plumbing fixtures
• Connects lengths of ABS piping
• Solvent weld connections
• Never use a primer with ABS
• Maximum working pressure of 5 psi

Change the direction of piping 45 degree s with the 1-1/2 in. ABS DWV 45 degree Hub x Hub Elbow. The ABS DWV 45 degree elbow features a hub x hub connection and is used to change the direction of flow. Acrylonitrile-Butadiene-Styrene (ABS) is resistant to a wide variety of materials ranging from sewage to commercial household chemical formulations and can be exposed to a wide temperature span.

• ABS construction
• For use with DWV systems to help remove wastewater from plumbing fixtures
• Helps air circulate in drainage piping
• Changes the direction of piping 45 degree
• Solvent weld connections
• Never use a primer with ABS
• Maximum working pressure of 5 psi

Use the NIBCO 1-1/2 in. ABS DWV 90 degree Hub x Hub Elbow with your DWV system to help remove wastewater from plumbing fixtures. The fitting features ABS construction, and it changes the direction of ABS piping 90 degree . ABS is lightweight, safe to handle and easy to install. ABS DWV is joined by solvent cementing or threading and can easily be connected to steel, copper, or cast iron through the use of transition fittings.

• ABS construction
• For use with DWV systems to help remove wastewater from plumbing fixtures
• Helps air circulate in drainage piping
• Changes the direction of ABS piping 90 degree
• Solvent weld connections
• Never use a primer with ABS
• Maximum working pressure of 5 psi

The NIBCO 2 in. ABS DWV 45 H x H x H Wye links a branch line and a horizontal drain line in an ABS sanitary plumbing system. The ABS DWV 45 wye features a hub x hub x hub connection and allows for a connection to be made in continuous pipe line and branch out to a different direction. Acrylonitrile-Butadiene-Styrene (ABS) is resistant to a wide variety of materials ranging from sewage to commercial household chemical formulations and can be exposed to a wide temperature span.

• 2 in. Inside Diameter and 2.125 in. Outside Diameter
• Made of ABS
• Connects an ABS branch line to a horizontal ABS drain line
• Solvent-welded connections
• Not for use with primer
• NSF/ANSI standard 14
• UL Listed 94V-0
• "2 I.D. and 2.125 O.D."

The NIBCO 1-1/2 ABS DWV 90 degree Hub x Hub Elbow is built for use with non-pressurized DWV systems to help remove wastewater from plumbing fixtures. The fitting features an ABS construction and a long-turn design. ABS is lightweight, safe to handle and easy to install.

• 11/2 in. Inside Diameter and 1.625 in. Outside Diameter
• ABS construction
• For use with non-pressurized DWV systems to help remove wastewater from plumbing fixtures
• Helps air circulate in drainage piping
• Changes the direction of piping 90 degree
• Solvent weld connections
• Never use a primer with ABS
• Long-turn design
• Maximum working pressure of 5 psi

The NIBCO 3 in. ABS DWV 90 degree long turn elbow features a hub x hub connection and long radius and is used to change the direction of flow. Acrylonitrile-Butadiene-Styrene (ABS) is resistant to a wide variety of materials ranging from sewage to commercial household chemical formulations and can be exposed to a wide temperature span. ABS is lightweight, safe to handle and easy to install. ABS DWV is joined by solvent cementing or threading and can easily be connected to steel, copper, or cast iron through the use of transition fittings. NIBCO plastic fittings are backed by a 5-year limited warranty.

• 3 in. Inside Diameter and 3.125 in. Outside Diameter
• ABS construction
• For use with DWV systems to help remove wastewater from plumbing fixtures
• Helps air circulate in drainage piping
• Changes the direction of abs piping 90 degree
• Solvent welded connections
• Never use a primer with ABS
• Long-turn design
• Maximum working pressure of 5 psi
• ASTM D2665
• ASTM D2665
• ASTM D3965
• ASTM D2661 and D3311

The NIBCO 3 in. ABS DWV 45 degree Hub x Hub Elbow is built for use with DWV systems to help remove wastewater from plumbing fixtures. The ABS fitting bends at a 45 degree angle to change the direction of piping. Do not test or use with compressed air or other gases.

• 3 in. Inside Diameter and 3.125 in. Outside Diameter
• ABS construction
• For use with DWV systems to help remove wastewater from plumbing fixtures
• Changes the direction of piping 45 degree
• Solvent weld connections
• Never use a primer with ABS
• Maximum working pressure of 5 psi
• "3 I.D. and 3.125 O.D."

Use the NIBCO 3 in. ABS DWV 45-Degree Spigot x Hub Street Elbow to change the direction of ABS piping by 45 degrees. The fitting is designed for use in DWV systems to help remove wastewater from plumbing fixtures. ABS DWV is joined by solvent cementing or threading and can easily be connected to steel, copper, or cast iron through the use of transition fittings.

• 3 in. Inside Diameter and 3.125 in. Outside Diameter
• ABS construction
• For use with DWV systems to help remove wastewater from plumbing fixtures
• Helps air circulate in drainage piping
• Changes the direction of ABS piping by 45 degree
• Solvent-welded connections
• Never use a primer with ABS
• Maximum working pressure of 5 psi
• "3 I.D. and 3.125 O.D."

The ABS DWV sanitary tee features a hub x hub x hub connection and a flowing sweep to aid in the evacuation of waste and used fluids. Please refer to NIBCO technical data sheets and catalogs for engineering and installation information. Acrylonitrile-Butadiene-Styrene (ABS) is resistant to a wide variety of materials ranging from sewage to commercial household chemical formulations and can be exposed to a wide temperature span. ABS is lightweight, safe to handle and easy to install. ABS DWV is joined by solvent cementing or threading and can easily be connected to steel, copper, or cast iron through the use of transition fittings. Because of its longstanding reputation for innovation and precision in design and manufacturing, NIBCO is the preferred brand in the industry.

• 3 in. Inside Diameter and 3.125 in. Outside Diameter
• ABS requires no primer
• Connects a branch line into a vertical ABS drain line
• For use with a non-pressurized sanitary system
• Maximum working pressure of 5 psi
• Hub x hub x hub solvent-welded connections
• NSF/ANSI Standard 14
• "3 I.D. and 3.125 O.D."

The ABS DWV 90 degree elbow features a hub x hub connection and is used to change the direction of flow. Please refer to NIBCO technical data sheets and catalogs for engineering and installation information. Acrylonitrile-Butadiene-Styrene (ABS) is resistant to a wide variety of materials ranging from sewage to commercial household chemical formulations and can be exposed to a wide temperature span. ABS DWV is joined by solvent cementing or threading and can easily be connected to steel, copper, or cast iron using transition fittings.

• ABS construction
• For use with drain, waste and vent systems to help remove wastewater from plumbing fixtures
• Solvent welded connections
• Never use a primer with ABS
• Maximum working pressure of 5 psi
• NSF/ANSI standard 14
• UL Listed 94V-0

The NIBCO 4 in. ABS DWV Hub x Hub Coupling connects lengths of ABS piping use in DWV systems. Be sure, though, never to use a primer on ABS material before solvent cementing. ABS DWV is joined by solvent cementing or threading and can easily be connected to steel, copper, or cast iron through the use of transition fittings.

• 4 in. Inside Diameter and 4.125 in. Outside Diameter
• ABS construction
• For use with DWV systems to help remove wastewater from plumbing fixtures
• Connects lengths of ABS piping
• Solvent weld connections
• Never use a primer with ABS
• Maximum working pressure of 5 psi

The NIBCO 4 in. ABS DWV MIPT Cleanout Plug is designed for use in sanitary drainage and vent piping systems with an ABS cleanout fitting (sold separately). The plug acts as a temporary system cap. ABS is lightweight, safe to handle and easy to install. ABS DWV is joined by solvent cementing or threading and can easily be connected to steel, copper, or cast iron through the use of transition fittings.

• 4 in. Inside Diameter and 4.125 in. Outside Diameter
• ABS should never be used with a primer
• Use in conjunction with an ABS cleanout fitting (sold separately)
• Temporarily caps the system
• Suitable for use in non-pressurized sanitary drain, waste and vent applications
• MIPT connection
• Maximum working pressure of 5 psi

The Water-Tite Techno Flange Standard Pattern Closet Flange with Techno Knockout features an inset test cap that cannot be damaged by construction equipment, ensuring drain lines stay securely covered and protected until installation and DWV (drain, waste, and vent) testing are complete. The Techno Knockout is specially designed to break out in one piece and will not fall down the drain line while it is being removed. Compatible with both 3- and 4-inch Schedule 40 DWV pipe, this ABS toilet flange has a Flush-Tite design that allows for flush installation inside of 4-inch pipe. It also features a beveled hum, which makes it easier to insert into 4-inch foam-core pipe.

• ABS closet flange with inset test cap that cannot be damaged by construction equipment
• Facilitates quick and easy connection of the toilet to the plumbing system
• Techno flange knockout breaks out in one piece and will not fall down the drain
• Beveled hub design allows for easier insertion into 4-inch foam-core pipe
• Fits 3- and 4-inch ABS Schedule 40 DWV (drain, waste, and vent) pipe
• Closet flange

The NIBCO 4 in. ABS DWV Hub x FIPT Female Adapter (Female NPT Thread) is used in non-pressurized Drain, Waste and Vent (DWV) systems, above-ground. Join this to male pipe threads using solvent. ABS DWV is joined by solvent cementing or threading and can easily be connected to steel, copper, or cast iron through the use of transition fittings.

• 4 in. Inside Diameter and 4.125 in. Outside Diameter
• The 4 in. ABS DWV soil pipe adapter is used in residential and commercial drain, waste and vent systems
• For above-ground DWV
• Join ABS to standard male pipe threads using solvent (do not use primer with ABS)
• CSA B181.1
• NSF/ANSI standard 14
• UL Listed 94V-0
• "4 I.D. and 4.125 O.D."

Put the NIBCO 3 in. x 3 in. x 2 in. ABS DWV 45 H x H x H Wye to use in your ABS sanitary system. The ABS DWV 45 Wye features a hub x hub x hub connection and allows for a connection to be made in continuous pipe line and branch out to a different direction. Acrylonitrile-Butadiene-Styrene (ABS) is resistant to a wide variety of materials ranging from sewage to commercial household chemical formulations and can be exposed to a wide temperature span.

• 3 X 3 X 2 in. Inside Diameter and 3 1/8 x 3 1/8 x 2 1/8 in. Outside Diameter
• Made of ABS
• Connects an ABS branch line to a horizontal ABS drain line
• Solvent-welded connections
• Not for use with primer
• NSF/ANSI standard 14
• UL Listed 94V-0

Get a temporary cap for your sanitary vent and drainage pipe system with the NIBCO 2 in. ABS DWV MIPT Cleanout Plug. The plug is used with an ABS cleanout fitting (sold separately). ABS is lightweight, safe to handle and easy to install.

• 2 in. Inside Diameter and 2.125 in. Outside Diameter
• ABS should never be used with a primer
• Use in conjunction with an ABS cleanout fitting (sold separately)
• Temporarily caps the system
• Suitable for use in non-pressurized sanitary drain, waste and vent applications
• MIPT connection
• Maximum working pressure of 5 psi
• "2 I.D. and 2.125 O.D."