The Water-Tite Techno Flange Standard Pattern Closet Flange with Techno Knockout features an inset test cap that cannot be damaged by construction equipment, ensuring drain lines stay securely covered and protected until installation and DWV (drain, waste, and vent) testing are complete. The Techno Knockout is specially designed to break out in one piece and will not fall down the drain line while it is being removed. Compatible with both 3- and 4-inch Schedule 40 DWV pipe, this ABS toilet flange has a Flush-Tite design that allows for flush installation inside of 4-inch pipe. It also features a beveled hum, which makes it easier to insert into 4-inch foam-core pipe.

• ABS closet flange with inset test cap that cannot be damaged by construction equipment
• Facilitates quick and easy connection of the toilet to the plumbing system
• Techno flange knockout breaks out in one piece and will not fall down the drain
• Beveled hub design allows for easier insertion into 4-inch foam-core pipe
• Fits 3- and 4-inch ABS Schedule 40 DWV (drain, waste, and vent) pipe
• Closet flange

Available in models with a variety of different patterns and installation options, Water-Tite Closet Flanges are a great choice for efficient and secure toilet installations. These durable plastic toilet flanges sit flush with the floor, allowing installers to quickly and easily connect water closet outlets to plumbing systems. Choose from standard or long-pattern models (with or without knockouts or pipe stops) to fit either ABS or PVC piping. Intended for solvent-weld installations only, these closet flanges fit Schedule 40 DWV (drain, waste, and vent) pipe in 3-inch, 4-inch, or both sizes.

• Plastic closet flange for solvent-weld installation
• Facilitates quick and easy connection of water closet outlet to plumbing system
• Designed for easy alignment of bolts and screws
• Choose from ABS or PVC models with or without knockouts or pipe stops
• Fits Schedule 40 DWV (drain, waste, and vent) pipe in 3-inch, 4-inch, or both sizes
• Pop top flush fit

The Water-Tite Techno Flange PVC Standard Pattern Closet Flange with Techno Knockout features a unique inset test cap that cannot be damaged by construction equipment, ensuring drain lines stay securely covered until installation and DWV (drain, waste, and vent) testing are complete. The Techno Knockout is specially designed to break out in one piece and will not fall down the drain line while it is being removed. Compatible with both 3- and 4-inch Schedule 40 DWV pipe, this toilet flange has a Flush-Tite design that allows for flush installation inside of 4-inch pipe. It also features a beveled hum, which makes it easier to insert into 4-inch foam-core pipe. The Techno Flange PVC Standard Pattern Closet Flange includes a durable stainless-steel ring that makes it easy to align bolts and screws, speeding up installation.

• PVC closet flange with inset test cap that cannot be damaged by construction equipment
• Techno flange knockout breaks out in one piece and will not fall down the drain
• Beveled hub design allows easier insertion into 4-inch foam-core pipe
• Stainless-steel ring for easy alignment of bolts and screws
• Fits 3- and 4-inch PVC Schedule 40 DWV (drain, waste, and vent) pipe
• Closet flange

Ideal for piping where the threaded top has been cut off, the AB&A Quick-Fit ABS Cleanout Fitting with Countersunk Plug is a simple and effective way to ensure your drainage cleanout is free from debris and vermin. Available in a variety of sizes, this cleanout fitting is made of durable ABS and fits inside Schedule 40 DWV (drain, waste, and vent) piping. The included plastic cleanout plug easily attaches to the threaded fitting, creating a tight seal to prevent wastewater, noxious fumes, and dangerous sewer gases from leaking out. The countersunk plug features a slotted-top design that requires a cleanout-plug wrench to open, helping to prevent tampering (wrench not included). And unlike metal models, this plug has a durable plastic construction that won't rust or corrode in outdoor environments. AB&A bath wastes, drains, fittings, cleanouts, and associated accessories are available in a variety of configurations and finishes to complement today's designs and customer preferences, delivering consistent high quality in both new construction and retrofit markets.

• Plastic cleanout fitting and plug for Schedule 40 DWV (drain, waste, and vent) piping
• Presses into pipe to create a tight seal
• Plug prevents wastewater, fumes, and sewer gases from exiting; stops vermin and debris from entering
• Durable ABS construction; won't rust or corrode in outdoor environments
• 3 in.
• Durable

The NIBCO 2 in. ABS DWV coupling features a hub x hub connection and connects ABS DWV piping lengths with solvent weld connections. Acrylonitrile-Butadiene-Styrene (ABS) is resistant to a wide variety of materials ranging from sewage to commercial household chemical formulations and can be exposed to a wide temperature span. ABS is lightweight, safe to handle and easy to install. ABS DWV is joined by solvent cementing or threading and can easily be connected to steel, copper or cast iron through the use of transition fittings. The NIBCO ABS DWV coupling is used in residential and commercial drain, waste and vent systems.

• 2 in. Inside Diameter and 2.125 in. Outside Diameter
• ABS construction
• For use with DWV systems to help remove wastewater from plumbing fixtures
• Connects lengths of ABS piping
• Solvent weld connections
• Never use a primer with ABS
• Maximum working pressure of 5 psi

The NIBCO ABS DWV sanitary tee is used in residential and commercial drain, waste and vent systems. The ABS DWV sanitary tee features a hub x hub x hub connection and a flowing sweep to aid in the evacuation of waste and used fluids. Acrylonitrile-Butadiene-Styrene (ABS) is resistant to a wide variety of materials ranging from sewage to commercial household chemical formulations and can be exposed to a wide temperature span.

• 2 X 11/2 X 11/2 in. Inside Diameter and 2 1/8 X 1 5/8 X 1 5/8 in. Outside Diameter
• ABS requires no primer
• Connects a branch line into a vertical ABS drain line
• Use for non-pressurized sanitary systems
• Helps remove waste water and water-borne wastes from plumbing fixtures and appliances
• Hub x hub x hub solvent-welded connections
• Maximum working pressure of 5 psi
• "2 X 11/2 X 11/2 I.D. and 2 1/8 X 1 5/8 X 1 5/8 O.D."

Available in models with a variety of different patterns and installation options, Water-Tite Closet Flanges are a great choice for efficient and secure toilet installations. These durable plastic toilet flanges sit flush with the floor, allowing installers to quickly and easily connect water closet outlets to plumbing systems. Choose from standard or long-pattern models (with or without knockouts or pipe stops) to fit either ABS or PVC piping. Intended for solvent-weld installations only, these closet flanges fit Schedule 40 DWV (drain, waste, and vent) pipe in 3-inch, 4-inch, or both sizes.

• Plastic closet flange for solvent-weld installation
• Facilitates quick and easy connection of water closet outlet to plumbing system
• Designed for easy alignment of bolts and screws
• Choose from ABS or PVC models with or without knockouts or pipe stops
• Fits Schedule 40 DWV (drain, waste, and vent) pipe in 3-inch, 4-inch, or both sizes
• Flush-Tite

Use the NIBCO 1-1/2 in. ABS DWV 90 degree Hub x Hub Vent Elbow with non-pressurized drain, waste and vent systems to help remove wastewater from plumbing fixtures. The fitting features an ABS construction. The ABS DWV 90 degree vent elbow features a hub x hub connection and the abrupt 90 degree angle is used to change the direction of flow in the venting side of the system. Acrylonitrile-Butadiene-Styrene (ABS) is resistant to a wide variety of materials ranging from sewage to commercial household chemical formulations and can be exposed to a wide temperature span.

• 11/2 in. Inside Diameter and 1.625 in. Outside Diameter
• ABS construction
• For use with drain, waste and vent systems
• Helps air circulate in drainage piping
• Solvent weld connections
• Never use a primer with ABS
• Maximum working pressure of 5 psi

The NIBCO 2 in. x 1-1/2 in. ABS DWV flush bushing is used in residential and commercial drain, waste and vent systems. The ABS DWV flush bushing features a spigot x hub connection and provides a means for reducing the size of the line. Acrylonitrile-Butadiene-Styrene (ABS) is resistant to a wide variety of materials ranging from sewage to commercial household chemical formulations and can be exposed to a wide temperature span.

• 2 X 11/2 in. Inside Diameter and 2 1/8 x 1 5/8 in. Outside Diameter
• ABS construction
• Used for non-pressurized DWV sanitary systems
• Not for use with primer
• Reduces pipe to smaller size by inserting into an ABS sitting hub
• Spigot x hub connection type
• Solvent-welded connections
• 5 psi maximum working pressure
• UL Listed 94V-0

The NIBCO 1-1/2 in. ABS DWV coupling is used in residential and commercial drain, waste and vent systems. The ABS DWV coupling features a hub x hub connection and connects ABS DWV piping lengths with solvent weld connections. Acrylonitrile-Butadiene-Styrene (ABS) is resistant to a wide variety of materials ranging from sewage to commercial household chemical formulations and can be exposed to a wide temperature span.

• ABS construction for durability
• For use with DWV piping systems
• Use to connect lengths of ABS piping (not included) together
• Provides air circulation
• Solvent weld connections
• Never use a primer with ABS
• Maximum working pressure of 5 psi

The ABS DWV 90 degree long turn street elbow features a spigot x hub connection and long radius and is used to change the direction of flow. Acrylonitrile-Butadiene-Styrene (ABS) is resistant to a wide variety of materials ranging from sewage to commercial household chemical formulations and can be exposed to a wide temperature span. ABS is light-weight, safe to handle and easy to install.

• NIBCO ABS DWV 90 degree long radius, long turn street elbow is used in residential and commercial drain, waste and vent systems
• ABS DWV is joined by solvent cementing or threading and can easily be connected to steel, copper or cast iron through the use of transition fittings
• Service temperature of -40 degree F to 180 degree F
• CSA B181.1
• ASTM D2665
• ASTM D3965
• ASTM D2661 and D3311
• UL listed 94V-0
• NSF/ANSI standard 14

Connect lengths of ABS piping with the NIBCO 3 in. ABS DWV H x H Coupling. The ABS DWV coupling features a hub x hub connection and connects ABS DWV piping lengths with solvent weld connections. Acrylonitrile-Butadiene-Styrene (ABS) is resistant to a wide variety of materials ranging from sewage to commercial household chemical formulations and can be exposed to a wide temperature span.

• 3 in. Inside Diameter and 3.125 in. Outside Diameter
• ABS construction
• Use with drain, waste and vent systems to help remove wastewater from plumbing fixtures
• Connects lengths of ABS piping
• Solvent weld connections
• Not for use with a primer
• Maximum working pressure of 5 psi

The ABS DWV 90 degree long turn street elbow features a spigot x hub connection and long radius and is used to change the direction of flow. Acrylonitrile-Butadiene-Styrene (ABS) is resistant to a wide variety of materials ranging from sewage to commercial household chemical formulations and can be exposed to a wide temperature span. ABS is light-weight, safe to handle and easy to install.

• NIBCO ABS DWV 90 degree long radius, long turn street elbow is used in residential and commercial drain, waste and vent systems
• ABS DWV is joined by solvent cementing or threading and can easily be connected to steel, copper, or cast iron through the use of transition fittings
• Service temperature range of -40 to 180 degree F
• CSA B121.1
• ASTM D2665
• ASTM D3965
• ASTM D2661 and D3311
• UL listed 94V-0
• NSF/ANSI standard 14

The NIBCO 4 in. x 4 in. x 3 in. ABS Sanitary Tee can be used to connect a horizontal ABS branch line to a vertical ABS drain line. ABS is lightweight, safe to handle and easy to install. ABS DWV is joined by solvent cementing or threading and can easily be connected to steel, copper, or cast iron through the use of transition fittings.

• 4 X 4 X 3 in. Inside Diameter and 4 1/8 X 4 1/8 X 3 1/8 in. Outside Diameter
• Do not use primer with ABS
• Used to connect a horizontal ABS branch line into a vertical ABS drain line
• Hub x hub x hub connections
• Solvent-welded connections
• NSF/ANSI Standard 14
• UL Listed 94V-0
• "4 X 4 X 3 I.D. and 4 1/8 X 4 1/8 X 3 1/8 O.D."

The NIBCO 1-1/2 in. female adapter features a spigot x female NPT thread connection and provides a means for adapting a solvent weld connection to a threaded connection. Acrylonitrile-Butadiene-Styrene (ABS) is resistant to a wide variety of materials ranging from sewage to commercial household chemical formulations and can be exposed to a wide temperature span. ABS is lightweight, safe to handle and easy to install. ABS DWV is joined by solvent cementing or threading and can easily be connected to steel, copper, or cast iron through the use of transition fittings. NIBCO plastic fittings are backed by a 5-year limited warranty.

• 11/2 in. Inside Diameter and 1.625 in. Outside Diameter
• The NIBCO 3 in. ABS DWV female adapter is used in residential and commercial drain, waste and vent systems
• Adapts acrylontrile -butadiene styrene pipe to male pipe threads
• Designed for use with non-pressurized sanitary system drain waste vent
• Solvent weld spigot x female iron pipe thread connection
• Maximum working pressure of 5 psi
• NSF/ANSI standard 14
• "11/2 I.D. and 1.625 O.D."

Use the NIBCO 2 in. x 1-1/2 in. ABS DWV Hub x Hub Reducing Coupling to join 2 lengths of pipe that differ in size. The durable fitting features ABS construction. ABS DWV is joined by solvent cementing or threading and can easily be connected to steel, copper, or cast iron through the use of transition fittings.

• 2 X 11/2 in. Inside Diameter and 2 1/8 x 1 5/8 in. Outside Diameter
• ABS construction for durability
• Connects lengths of pipe of 2 different sizes
• For use with DWV piping systems
• Not for use with primer
• Solvent weld connections
• Helps air circulate in piping
• Maximum working pressure of 5 psi

The NIBCO ABS DWV 45-degree street elbow is used in residential and commercial drain, waste and vent systems. Complete the installation of your DWV system with the NIBCO ABS DWV 45-Degree Spigot x Hub Street Elbow. This ABS fitting welds to pipe with a solvent and changes the direction of piping 45 degrees.

• 2 in. Inside Diameter and 2.125 in. Outside Diameter
• ABS construction
• For use with DWV systems to help remove wastewater from plumbing fixtures
• Helps air circulate in drainage piping
• Changes the direction of piping 45 degree
• Solvent weld connections
• Never use a primer with ABS
• Maximum working pressure of 5 psi
• Made in USA

The NIBCO 3 in. x 3 in. 1-1/2 in. ABS DWV Hub x Hub x Hub Sanitary Tee connects a branch line to a vertical drain line. The tee has a maximum working pressure of 5 psi. ABS is lightweight, safe to handle and easy to install.

• 3 X 3 X 11/2 in. Inside Diameter and 3 1/8 X 3 1/8 X 1 5/8 in. Outside Diameter
• ABS does not require primer
• Connects a branch line into a vertical ABS drain line
• For use with non-pressurized sanitary systems
• Hub x hub x hub solvent-welded connections
• Maximum working pressure of 5 psi
• NSF/ANSI Standard 14
• UL Listed 94V-0
• ASTM D2665 and D3311

The NIBCO 1-1/2 in. ABS DWV female adapter features a hub x female NPT thread connection and provides a means for adapting a solvent weld connection to a threaded connection. Acrylonitrile-Butadiene-Styrene (ABS) is resistant to a wide variety of materials ranging from sewage to commercial household chemical formulations and can be exposed to a wide temperature span. ABS is lightweight, safe to handle and easy to install. ABS DWV is joined by solvent cementing or threading and can easily be connected to steel, copper, or cast iron through the use of transition fittings. NIBCO plastic fittings are backed by a 5-year limited warranty.

• 11/2 in. Inside Diameter and 1.625 in. Outside Diameter
• The NIBCO 1-1/2 in. ABS DWV female adapter is used in residential and commercial drain, waste and vent systems
• For above-ground DWV
• Join ABS to standard male pipe threads using solvent (do not use primer with ABS)
• NSF/ANSI standard 14
• UL listed 94V-0
• NSF U.P. certified
• "11/2 I.D. and 1.625 O.D."

Use the NIBCO 3 in. ABS DWV 22-1/2 SPG x Hub Street Elbow to adapt ABS piping to cast iron. The ABS DWV 22-1/2 degree elbow features a spigot x hub connection and is used to change the direction of flow. Acrylonitrile-Butadiene-Styrene (ABS) is resistant to a wide variety of materials ranging from sewage to commercial household chemical formulations and can be exposed to a wide temperature span.

• 3 in. Inside Diameter and 3.125 in. Outside Diameter
• ABS construction
• For use in drain, waste and vent systems to help remove wastewater from plumbing fixtures
• Adapts ABS piping to cast iron using solvent welded connections
• Never use a primer with ABS
• Maximum working pressure of 5 psi
• NSF/ANSI standard 14
• UL listed 94V-0
• "3 I.D. and 3.125 O.D."

The NIBCO 1-1/2 in. ABS P-Trap is designed to prevent sewer gas from escaping from a plumbing fixture or drain. ABS is lightweight, safe to handle and easy to install. ABS DWV is joined by solvent cementing or threading and can easily be connected to steel, copper, or cast iron through the use of transition fittings.

• Do not use primer with ABS
• Hub x hub connections
• Solvent-welded connections
• NSF/ANSI standard 14
• UL Listed 94V-0
• Maximum working pressure of 5 psi

The NIBCO 1-1/2 in. x 1-1/4 in. ABS DWV SPG x SJ Street Trap Adapter is used in a non-pressurized sanitary system to adapt a fitting hub to a tubular trap at the floor or wall. Drain, Waste and Vent (DWV) allows removal of waste water and water-borne waste away from appliances and fixtures. ABS is lightweight, safe to handle and easy to install.

• 11/2 X 11/4 in. Inside Diameter and 1 5/8 X 1 3/8 in. Outside Diameter
• ABS plastic material
• For above-ground DWV
• ABS solvent welds to fitting hub and incorporates slip joint for tubular traps
• Do not use primer with ABS
• NSF/ANSI Standard 14
• UL Listed 94V-0
• "11/2 X 11/4 I.D. and 1 5/8 X 1 3/8 O.D."

The NIBCO 1-1/2 in. ABS DWV male adapter is used above-ground in Drain, Waste and Vent (DWV) non-pressurized sanitary systems which remove water-borne waste and waste water from appliances and fixtures. This adapter adapts ABS to standard female pipe threads. ABS is lightweight, safe to handle and easy to install. ABS DWV is joined by solvent cementing or threading and can easily be connected to steel, copper, or cast iron through the use of transition fittings.

• 11/2 in. Inside Diameter and 1.625 in. Outside Diameter
• The NIBCO 1-1/2 in. ABS DWV male adapter is used in residential and commercial drain, waste and vent systems
• For above-ground DWV
• Join ABS to standard female pipe threads using solvent (do not use primer with ABS)
• CSA B181.1
• ASTM D2665
• ASTM D2661 and D3311
• UL Listed 94V-0
• NSF/ANSI Standard 14
• NSF U.P. Certified

The NIBCO 4 in. x 4 in. x 3 in. ABS DWV 45 H x H x H Wye leads a branch line into a horizontal drain line in an ABS sanitary system. It is secured with solvent welds. ABS are lightweight, safe to handle and easy to install. ABS DWV is joined by solvent cementing or threading and can easily be connected to steel, copper, or cast iron using transition fittings.

• 4 X 4 X 3 in. Inside Diameter and 4 1/8 X 4 1/8 X 3 1/8 in. Outside Diameter
• Made of ABS
• Connects an ABS branch line to a horizontal ABS drain line
• Solvent-welded connections
• Not for use with primer
• NSF/ANSI standard 14
• UL Listed 94V-0
• "4 X 4 X 3 I.D. and 4 1/8 X 4 1/8 X 3 1/8 O.D."

The NIBCO 1-1/2 in. ABS DWV 22-1/2 degree Hub x Hub Elbow is built for use with DWV systems. Use the ABS fitting to redirect piping 22-1/2 degree s.

• 11/2 in. Inside Diameter and 1.625 in. Outside Diameter
• ABS construction
• For use with DWV systems to help remove wastewater from plumbing fixtures
• Helps air circulate in drainage piping
• Changes the direction of piping 22-1/2 degree
• Solvent welded connections
• Never use a primer with ABS
• Maximum working pressure of 5 psi
• "11/2 I.D. and 1.625 O.D."

Dearborn 1-1/2 in. x 16 in. Center to Center, Hi-Line Slip Joint Combination with Baffle Tee. Designed for use in tubular drain applications. Can be used for double sink kitchen applications.

• 1-1/2 in. Dia by 16 in. length
• Made of durable polypropylene plastic
• Black in color, also available in white
• Includes 2 waste arms, 2 Hi-line nipples, 4 slip nuts and 4 washers
• Includes true blue premium washers for superior sealing
• Meets ASTM F 409
• IAPMO Listed

Install the NIBCO 4 in. ABS DWV 90-Degree Hub x Hub Long-Turn Elbow to remove wastewater from plumbing fixtures and appliances. This durable plastic elbow provides air circulation within piping and is designed for use in non-pressurized sanitary system DWV applications. ABS DWV is joined by solvent cementing or threading and can easily be connected to steel, copper, or cast iron through the use of transition fittings.

• 4 in. Inside Diameter and 4.125 in. Outside Diameter
• ABS plastic construction
• Changes the direction of piping by 90 degree
• Removes wastewater from plumbing fixtures and appliances
• Suitable for use in non-pressurized sanitary system DWV applications
• Provides air circulation within piping
• Compatible with ABS pipe
• Solvent-welded connections
• Not for use with primer

Connect a branch line into a vertical ABS drain line with the NIBCO 2 in. x 2 in. x 1-1/2 in. ABS DWV Hub x Hub x Hub Sanitary Tee. The tee is designed for use with non-pressurized sanitary systems. ABS is lightweight, safe to handle and easy to install. ABS DWV is joined by solvent cementing or threading and can easily be connected to steel, copper, or cast iron through the use of transition fittings.

• 2 X 2 X 11/2 in. Inside Diameter and 2 1/8 X 2 1/8 X 1 5/8 in. Outside Diameter
• ABS requires no primer
• Connects a branch line into a vertical ABS drain line
• For use with non-pressurized sanitary systems
• Hub x hub x hub solvent-welded connections
• Maximum working pressure of 5 psi
• NSF/ANSI Standard 14
• "2 X 2 X 11/2 I.D. and 2 1/8 X 2 1/8 X 1 5/8 O.D."

The NIBCO 1-1/2 in. ABS DWV Hub x Hub x Cleanout Test Tee is designed for use with non-pressurized sanitary systems. The tee provides a cleanout opening and plug. ABS is lightweight, safe to handle and easy to install. ABS DWV is joined by solvent cementing or threading and can easily be connected to steel, copper, or cast iron through the use of transition fittings.

• 11/2 in. Inside Diameter and 1.625 in. Outside Diameter
• ABS requires no primer
• Provides a cleanout opening and plug
• For use with non-pressurized sanitary systems
• Hub x hub x cleanout solvent-welded connections
• Maximum working pressure of 5 psi
• NSF/ANSI Standard 14
• "11/2 I.D. and 1.625 O.D."

Leonard M-10 Thermostat Assembly Less Cover

• Allows for reliable indoor use
• Sturdy stainless steel build ensures durability
• 125 PSI rated to deliver optimum performance
• Restores system to efficient performance

The NIBCO 4 in. ABS DWV Hub x Hub x Hub Cleanout Tee can be inserted into an ABS sitting hub to reduce to a smaller pipe size. The tee should be used with non-pressurized sanitary systems. ABS is lightweight, safe to handle and easy to install. ABS DWV is joined by solvent cementing or threading and can easily be connected to steel, copper, or cast iron through the use of transition fittings.

• 4 in. Inside Diameter and 4.125 in. Outside Diameter
• ABS does not require primer
• Insert into an ABS sitting hub to reduce to smaller pipe size
• For use with non-pressurized sanitary systems
• Hub x hub x hub solvent-welded connections
• Maximum working pressure of 5 psi
• ASTM D2661, D3311, D3965, D2665
• ASTM D3965
• ASTM D2661 and D3311
• NSF/ANSI Standard 14
• NSF U.P. Certified

The NIBCO 4 in. ABS DWV female adapter is used in residential and commercial drain, waste and vent systems. The ABS DWV female adapter features a spigot x female NPT thread connection and provides a means for adapting a solvent weld connection to a threaded connection. Acrylonitrile-Butadiene-Styrene (ABS) is resistant to a wide variety of materials ranging from sewage to commercial household chemical formulations and can be exposed to a wide temperature span.

• 4 in. Inside Diameter and 4.125 in. Outside Diameter
• The 4 in. ABS DWV soil pipe adapter is used in residential and commercial drain, waste and vent systems
• For above-ground DWV
• Designed for use with non-pressurized sanitary system DWV
• Solvent weld spigot x female iron pipe thread connection
• Maximum working pressure of 5 psi
• NSF/ANSI Standard 14
• "4 I.D. and 4.125 O.D."

The NIBCO ABS DWV long radius combination tee-wye is used in residential and commercial drain, waste and vent systems. The ABS DWV long radius combination tee-wye features a hub x hub x hub connection. The tee-wye allows for a connection to be made in continuous pipe line and branch out to a different direction. Acrylonitrile-Butadiene-Styrene (ABS) is resistant to a wide variety of materials ranging from sewage to commercial household chemical formulations and can be exposed to a wide temperature span.

• 3 X 3 X 2 in. Inside Diameter and 3 1/8 X 3 1/8 X 2 1/8 in. Outside Diameter
• ABS requires no primer
• Use when connecting a horizontal ABS branch line into a vertical ABS drain line
• For use with non-pressurized sanitary systems
• Maximum working pressure of 5 psi
• Hub x hub x hub solvent-welded connections
• NSF/ANSI Standard 14
• "3 X 3 X 2 I.D. and 3 1/8 X 3 1/8 X 2 1/8 O.D."

Use the NIBCO 3 in. x 3 in. x 1-1/2 in. ABS DWV 45-Degree H x H x H Wye to join a branch line to a horizontal drain line in an ABS sanitary system. The hub connections must be solvent welded together. Acrylonitrile-Butadiene-Styrene (ABS) is resistant to a wide variety of materials ranging from sewage to commercial household chemical formulations and can be exposed to a wide temperature span.

• 3 X 3 X 11/2 in. Inside Diameter and 3 1/8 X 3 1/8 X 1 5/8 in. Outside Diameter
• Made of ABS
• Connects an ABS branch line to a horizontal ABS drain line
• Solvent-welded connections
• Not for use with primer
• NSF/ANSI Standard 14
• UL Listed 94V-0
• "3 X 3 X 11/2 I.D. and 3 1/8 X 3 1/8 X 1 5/8 O.D."

Ideal for piping where the threaded top has been cut off, the AB&A Quick-Fit ABS Cleanout Fitting with Countersunk Plug is a simple and effective way to ensure your drainage cleanout is free from debris and vermin. Available in a variety of sizes, this cleanout fitting is made of durable ABS and fits inside Schedule 40 DWV (drain, waste, and vent) piping. The included plastic cleanout plug easily attaches to the threaded fitting, creating a tight seal to prevent wastewater, noxious fumes, and dangerous sewer gases from leaking out. The countersunk plug features a slotted-top design that requires a cleanout-plug wrench to open, helping to prevent tampering (wrench not included). And unlike metal models, this plug has a durable plastic construction that won't rust or corrode in outdoor environments. AB&A bath wastes, drains, fittings, cleanouts, and associated accessories are available in a variety of configurations and finishes to complement today's designs and customer preferences, delivering consistent high quality in both new construction and retrofit markets.

• Plastic cleanout fitting and plug for Schedule 40 DWV (drain, waste, and vent) piping
• Presses into pipe to create a tight seal
• Plug prevents wastewater, fumes, and sewer gases from exiting; stops vermin and debris from entering
• Durable ABS construction; won't rust or corrode in outdoor environments
• 4 in.
• Durable

Help prevent sewer gas from escaping by installing the NIBCO 1-1/2 in. ABS DWV Hub x Hub P-Trap under the discharge of a plumbing fixture or drain. The p-trap features hub x hub connections. ABS DWV is joined by solvent cementing or threading and can easily be connected to steel, copper, or cast iron through the use of transition fittings.

• ABS requires no primer
• Use under the discharge of a plumbing fixture or drain to help prevent sewer gas from escaping
• For use with non-pressurized sanitary systems
• Maximum working pressure of 5 psi
• Hub x hub solvent-welded connections
• NSF/ANSI standard 14
• UL Listed 94V-0

The NIBCO 3 in. ABS DWV Hub x Hub x Cleanout Test Tee provides a cleanout opening and plug. The tee should be used with a non-pressurized sanitary system. ABS is lightweight, safe to handle and easy to install. ABS DWV is joined by solvent cementing or threading and can easily be connected to steel, copper, or cast iron through the use of transition fittings.

• 3 in. Inside Diameter and 3.125 in. Outside Diameter
• ABS requires no primer
• Provides a cleanout opening and plug
• For use with a non-pressurized sanitary system
• Hub x hub x cleanout solvent-welded connections
• Maximum working pressure of 5 psi
• NSF/ANSI Standard 14
• "3 I.D. and 3.125 O.D."

The NIBCO 1-1/2 in. ABS DWV MIPT Cleanout Plug is designed to act as a temporary cap for sanitary drainage and vent piping systems. The plug is used with an ABS cleanout fitting (sold separately). ABS is lightweight, safe to handle and easy to install. ABS DWV is joined by solvent cementing or threading and can easily be connected to steel, copper, or cast iron through the use of transition fittings.

• 11/2 in. Inside Diameter and 1.625 in. Outside Diameter
• ABS should never be used with a primer
• Use in conjunction with an ABS cleanout fitting (sold separately)
• Temporarily caps the system
• Suitable for use in non-pressurized sanitary drain, waste and vent applications
• MIPT connection
• Maximum working pressure of 5 psi
• "11/2 I.D. and 1.625 O.D."

Connect a branch line into a vertical ABS drain line with the NIBCO 4 in. ABS DWV Hub x Hub x Hub Sanitary Tee. The tee is designed for use with non-pressurized sanitary systems. ABS is lightweight, safe to handle and easy to install. ABS DWV is joined by solvent cementing or threading and can easily be connected to steel, copper, or cast iron through the use of transition fittings.

• 4 in. Inside Diameter and 4.125 in. Outside Diameter
• ABS requires no primer
• Connects a branch line into a vertical ABS drain line
• For use with non-pressurized sanitary systems
• Hub x hub x hub solvent-welded connections
• Maximum working pressure of 5 psi
• NSF/ANSI Standard 14
• "4 I.D. and 4.125 O.D."

The NIBCO ABS DWV 22-1/2-degree elbow is used in residential and commercial drain, waste and vent systems. The ABS DWV 22-1/2-degree elbow features a hub x hub connection and is used to change the direction of flow. Please refer to NIBCO technical data sheets and catalogs for engineering and installation information. Acrylonitrile-Butadiene-Styrene (ABS) is resistant to a wide variety of materials ranging from sewage to commercial household chemical formulations and can be exposed to a wide temperature span. ABS is lightweight, safe to handle and easy to install. ABS DWV is joined by solvent cementing or threading and can easily be connected to steel, copper, or cast iron through the use of transition fittings. NIBCO plastic fittings are backed by a 5-year limited warranty. Because of its longstanding reputation for innovation and precision in design and manufacturing, NIBCO is the preferred brand in the industry.

• Service temperature -40°F to 180°F
• Do not test or use with compressed air or other gases
• ASTM D2665 & D3965
• ASTM D2661 and D3311
• UL Listed 94V-0
• NSF/ANSI Standard 14
• Size range 1-1/2" to 6"

Connect two lengths of different-sized ABS piping with the 3 in. x 2 in. ABS DWV Hub x Hub Reducing Coupling. The fitting features ABS construction and is built for use with DWV systems to help remove wastewater from plumbing fixtures. ABS DWV is joined by solvent cementing or threading and can easily be connected to steel, copper, or cast iron through the use of transition fittings.

• 3 X 2 in. Inside Diameter and 3 1/8 X 2 1/8 in. Outside Diameter
• ABS construction
• For use with DWV systems to help remove wastewater from plumbing fixtures
• Connects lengths of different-sized piping
• Solvent welded connections
• Never use a primer with ABS
• Maximum working pressure of 5 psi
• "3 X 2 I.D. and 3 1/8 X 2 1/8 O.D."

The NIBCO 2 in. ABS DWV H x H x H Long-Radius Tee is designed for use with non-pressurized DWV systems. The tee has a maximum working pressure of 5 psi. ABS is lightweight, safe to handle and easy to install. ABS DWV is joined by solvent cementing or threading and can easily be connected to steel, copper, or cast iron through the use of transition fittings.

• 2 in. Inside Diameter and 2.125 in. Outside Diameter
• ABS requires no primer
• Connects a horizontal ABS branch line into a vertical ABS drain line
• For use with non-pressurized DWV systems
• H x H x H solvent-welded connections
• Maximum working pressure of 5 psi
• NSF/ANSI Standard 14
• "2 I.D. and 2.125 O.D."

The NIBCO 3 in. x 3 in. x 2 in. ABS DWV 90 elbow is used in residential and commercial drain, waste and vent systems. The ABS DWV 90 elbow with low heel inlet features hub connections and is used to change the direction of flow. Acrylonitrile-Butadiene-Styrene (ABS) is resistant to a wide variety of materials ranging from sewage to commercial household chemical formulations and can be exposed to a wide temperature span.

• 3 X 3 X 2 in. Inside Diameter and 3 1/8 X 3 1/8 X 2 1/8 in. Outside Diameter
• Do not use primer with ABS
• Used with drain, waste and vent piping systems
• Connects a branch or vent line at a change of direction in a large vertical or horizontal drain
• Hub x hub x hub connections
• Solvent-welded connections
• NSF/ANSI standard 14
• UL listed 94V-0
• "3 X 3 X 2 I.D. and 3 1/8 X 3 1/8 X 2 1/8 O.D."

The NIBCO 4 in. x 3 in. ABS DWV flush bushing is used in residential and commercial drain, waste and vent systems. The ABS DWV flush bushing features a spigot x hub connection and provides a means for reducing the size of the line. Acrylonitrile-Butadiene-Styrene (ABS) is resistant to a wide variety of materials ranging from sewage to commercial household chemical formulations and can be exposed to a wide temperature span.

• 4 X 3 in. Inside Diameter and 4 1/8 X 3 1/8 in. Outside Diameter
• ABS construction
• For use with non-pressurized drain, waste and vent sanitary systems
• Used to reduce pipe size by inserting into ABS sitting hub
• Spigot x hub connection type
• Solvent welded connection
• 5 psi maximum working pressure
• UL Listed 94V-0
• "4 X 3 I.D. and 4 1/8 X 3 1/8 O.D."

The ABS DWV 90 degree elbow features a hub x hub connection and is used to change the direction of flow. Please refer to NIBCO technical data sheets and catalogs for engineering and installation information. Acrylonitrile-Butadiene-Styrene (ABS) is resistant to a wide variety of materials ranging from sewage to commercial household chemical formulations and can be exposed to a wide temperature span. ABS DWV is joined by solvent cementing or threading and can easily be connected to steel, copper, or cast iron using transition fittings.

• ABS construction
• For use with drain, waste and vent systems to help remove wastewater from plumbing fixtures
• Solvent welded connections
• Never use a primer with ABS
• Maximum working pressure of 5 psi
• NSF/ANSI standard 14
• UL Listed 94V-0

The NIBCO 4 in. ABS DWV 45-Degree Spigot x Hub Street Elbow is built for use with DWV systems to help remove wastewater from plumbing fixtures. The fitting features ABS construction. ABS DWV is joined by solvent cementing or threading and can easily be connected to steel, copper, or cast iron through the use of transition fittings.

• 4 in. Inside Diameter and 4.125 in. Outside Diameter
• ABS construction
• For use with DWV systems to help remove wastewater from plumbing fixtures
• Helps air circulate in drainage piping
• Solvent weld connections
• Never use a primer with ABS
• Maximum working pressure of 5 psi
• "4 I.D. and 4.125 O.D."

The NIBCO 2 in. ABS DWV All-Hub Double Sanitary Tee can be used with a non-pressurized sanitary system to bring 2 branch lines into a vertical drain line. Maximum working pressure of up to 5 psi. BS is lightweight, safe to handle and easy to install. ABS DWV is joined by solvent cementing or threading and can easily be connected to steel, copper, or cast iron through the use of transition fittings.

• 2 in. Inside Diameter and 2.125 in. Outside Diameter
• ABS requires no primer
• For non-pressurized sanitary systems
• Brings 2 ABS DWV branch lines into a vertical drain line
• All-hub solvent-welded connections
• NSF/ANSI Standard 14
• CSA B181.1
• ASTM D2665 and D3965
• ASTM D3965
• ASTM D2661 and D3311
• NSF U.P. Certified

The ABS DWV 45 degree street elbow features a spigot x hub connection and is used to change the direction of flow. Acrylonitrile-Butadiene-Styrene (ABS) is resistant to a wide variety of materials ranging from sewage to commercial household chemical formulations and can be exposed to a wide temperature span. ABS DWV is joined by solvent cementing or threading and can easily be connected to steel, copper, or cast iron through the use of transition fittings.

• 11/2 in. Inside Diameter and 1.625 in. Outside Diameter
• ABS construction
• For use with DWV systems to help remove wastewater from plumbing fixtures
• Helps circulate air in drainage piping
• Redirects piping 45 degree
• Solvent weld connections
• Never use a primer with ABS
• Maximum working pressure of 5 psi
• "11/2 I.D. and 1.625 O.D."