Use the 2 in. ABS DWV 45 degree Hub x Hub Elbow to complete the installation of your DWV system. This fitting features ABS construction and redirects ABS piping (not included) 45 degree s. ABS DWV is joined by solvent cementing or threading and can easily be connected to steel, copper, or cast iron through the use of transition fittings.

• 2 in. Inside Diameter and 2.125 in. Outside Diameter
• ABS construction
• For use with DWV piping systems
• Helps air circulate
• Redirects ABS piping (not included) 45 degree
• Solvent weld connections
• Never use a primer with ABS
• Maximum working pressure of 5 psi
• "2 I.D. and 2.125 O.D."

The NIBCO ABS DWV 45-degree street elbow is used in residential and commercial drain, waste and vent systems. Complete the installation of your DWV system with the NIBCO ABS DWV 45-Degree Spigot x Hub Street Elbow. This ABS fitting welds to pipe with a solvent and changes the direction of piping 45 degrees.

• 2 in. Inside Diameter and 2.125 in. Outside Diameter
• ABS construction
• For use with DWV systems to help remove wastewater from plumbing fixtures
• Helps air circulate in drainage piping
• Changes the direction of piping 45 degree
• Solvent weld connections
• Never use a primer with ABS
• Maximum working pressure of 5 psi
• Made in USA

With the NIBCO 2 in. ABS DWV 90 degree Hub x Hub Elbow, you can complete the installation of your DWV system. The fitting features ABS construction and changes the direction of piping by 90 degree s. ABS DWV is joined by solvent cementing or threading and can easily be connected to steel, copper, or cast iron through the use of transition fittings.

• 2 in. Inside Diameter and 2.125 in. Outside Diameter
• ABS construction
• For use with DWV systems to help remove wastewater from plumbing fixtures
• Helps air circulate in drainage piping
• Changes the direction of piping by 90 degree
• Solvent weld connections
• Never use a primer with ABS
• Maximum working pressure of 5 psi

The 2 in. ABS DWV 90-Degree Hub x Hub Long-Turn Elbow is built for use with non-pressurized DWV systems to help remove wastewater from plumbing fixtures. The fitting features an ABS construction. ABS is lightweight, safe to handle and easy to install. ABS DWV is joined by solvent cementing or threading and can easily be connected to steel, copper, or cast iron through the use of transition fittings.

• 2 in. Inside Diameter and 2.125 in. Outside Diameter
• ABS construction
• For use with non-pressurized DWV systems to help remove wastewater from plumbing fixtures
• Helps air circulate in drainage piping
• Changes the direction of piping 90 degree
• Solvent weld connections
• Never use a primer with ABS
• Long-turn design
• Maximum working pressure of 5 psi

Use the NIBCO 1-1/2 in. ABS DWV 90 degree Hub x Hub Elbow with your DWV system to help remove wastewater from plumbing fixtures. The fitting features ABS construction, and it changes the direction of ABS piping 90 degree . ABS is lightweight, safe to handle and easy to install. ABS DWV is joined by solvent cementing or threading and can easily be connected to steel, copper, or cast iron through the use of transition fittings.

• ABS construction
• For use with DWV systems to help remove wastewater from plumbing fixtures
• Helps air circulate in drainage piping
• Changes the direction of ABS piping 90 degree
• Solvent weld connections
• Never use a primer with ABS
• Maximum working pressure of 5 psi

The NIBCO 1-1/2 in. ABS DWV coupling is used in residential and commercial drain, waste and vent systems. The ABS DWV coupling features a hub x hub connection and connects ABS DWV piping lengths with solvent weld connections. Acrylonitrile-Butadiene-Styrene (ABS) is resistant to a wide variety of materials ranging from sewage to commercial household chemical formulations and can be exposed to a wide temperature span.

• ABS construction for durability
• For use with DWV piping systems
• Use to connect lengths of ABS piping (not included) together
• Provides air circulation
• Solvent weld connections
• Never use a primer with ABS
• Maximum working pressure of 5 psi

The NIBCO 2 in. ABS DWV coupling features a hub x hub connection and connects ABS DWV piping lengths with solvent weld connections. Acrylonitrile-Butadiene-Styrene (ABS) is resistant to a wide variety of materials ranging from sewage to commercial household chemical formulations and can be exposed to a wide temperature span. ABS is lightweight, safe to handle and easy to install. ABS DWV is joined by solvent cementing or threading and can easily be connected to steel, copper or cast iron through the use of transition fittings. The NIBCO ABS DWV coupling is used in residential and commercial drain, waste and vent systems.

• 2 in. Inside Diameter and 2.125 in. Outside Diameter
• ABS construction
• For use with DWV systems to help remove wastewater from plumbing fixtures
• Connects lengths of ABS piping
• Solvent weld connections
• Never use a primer with ABS
• Maximum working pressure of 5 psi

The NIBCO ABS DWV 22-1/2-degree elbow is used in residential and commercial drain, waste and vent systems. The ABS DWV 22-1/2-degree elbow features a hub x hub connection and is used to change the direction of flow. Please refer to NIBCO technical data sheets and catalogs for engineering and installation information. Acrylonitrile-Butadiene-Styrene (ABS) is resistant to a wide variety of materials ranging from sewage to commercial household chemical formulations and can be exposed to a wide temperature span. ABS is lightweight, safe to handle and easy to install. ABS DWV is joined by solvent cementing or threading and can easily be connected to steel, copper, or cast iron through the use of transition fittings. NIBCO plastic fittings are backed by a 5-year limited warranty. Because of its longstanding reputation for innovation and precision in design and manufacturing, NIBCO is the preferred brand in the industry.

• Service temperature -40°F to 180°F
• Do not test or use with compressed air or other gases
• ASTM D2665 & D3965
• ASTM D2661 and D3311
• UL Listed 94V-0
• NSF/ANSI Standard 14
• Size range 1-1/2" to 6"

The NIBCO 2 in. ABS DWV 45 H x H x H Wye links a branch line and a horizontal drain line in an ABS sanitary plumbing system. The ABS DWV 45 wye features a hub x hub x hub connection and allows for a connection to be made in continuous pipe line and branch out to a different direction. Acrylonitrile-Butadiene-Styrene (ABS) is resistant to a wide variety of materials ranging from sewage to commercial household chemical formulations and can be exposed to a wide temperature span.

• 2 in. Inside Diameter and 2.125 in. Outside Diameter
• Made of ABS
• Connects an ABS branch line to a horizontal ABS drain line
• Solvent-welded connections
• Not for use with primer
• NSF/ANSI standard 14
• UL Listed 94V-0
• "2 I.D. and 2.125 O.D."

The NIBCO 1-1/2 in. ABS DWV Hub x Hub x Hub Sanitary Tee connects a branch line into a vertical ABS drain line in a non-pressurized sanitary system. The tee has a maximum working pressure of 5 psi. ABS is lightweight, safe to handle and easy to install. ABS DWV is joined by solvent cementing or threading and can easily be connected to steel, copper, or cast iron through the use of transition fittings.

• 11/2 in. Inside Diameter and 1.625 in. Outside Diameter
• ABS does not require primer
• Connects a branch line into a vertical ABS drain line
• For use with non-pressurized sanitary systems
• Maximum working pressure of 5 psi
• Hub x hub x hub solvent-welded connections
• NSF/ANSI standard 14

The ABS DWV 90 degree elbow features a hub x hub connection and is used to change the direction of flow. Please refer to NIBCO technical data sheets and catalogs for engineering and installation information. Acrylonitrile-Butadiene-Styrene (ABS) is resistant to a wide variety of materials ranging from sewage to commercial household chemical formulations and can be exposed to a wide temperature span. ABS DWV is joined by solvent cementing or threading and can easily be connected to steel, copper, or cast iron using transition fittings.

• ABS construction
• For use with drain, waste and vent systems to help remove wastewater from plumbing fixtures
• Solvent welded connections
• Never use a primer with ABS
• Maximum working pressure of 5 psi
• NSF/ANSI standard 14
• UL Listed 94V-0

Change the direction of piping 45 degree s with the 1-1/2 in. ABS DWV 45 degree Hub x Hub Elbow. The ABS DWV 45 degree elbow features a hub x hub connection and is used to change the direction of flow. Acrylonitrile-Butadiene-Styrene (ABS) is resistant to a wide variety of materials ranging from sewage to commercial household chemical formulations and can be exposed to a wide temperature span.

• ABS construction
• For use with DWV systems to help remove wastewater from plumbing fixtures
• Helps air circulate in drainage piping
• Changes the direction of piping 45 degree
• Solvent weld connections
• Never use a primer with ABS
• Maximum working pressure of 5 psi

Put the NIBCO 3 in. x 3 in. x 2 in. ABS DWV 45 H x H x H Wye to use in your ABS sanitary system. The ABS DWV 45 Wye features a hub x hub x hub connection and allows for a connection to be made in continuous pipe line and branch out to a different direction. Acrylonitrile-Butadiene-Styrene (ABS) is resistant to a wide variety of materials ranging from sewage to commercial household chemical formulations and can be exposed to a wide temperature span.

• 3 X 3 X 2 in. Inside Diameter and 3 1/8 x 3 1/8 x 2 1/8 in. Outside Diameter
• Made of ABS
• Connects an ABS branch line to a horizontal ABS drain line
• Solvent-welded connections
• Not for use with primer
• NSF/ANSI standard 14
• UL Listed 94V-0

The NIBCO ABS DWV 45-degree wye is used in residential and commercial drain, waste and vent systems. The ABS DWV 45-degree wye features a hub x hub x hub connection and allows for a connection to be made in continuous pipe line and branch out to a different direction. Acrylonitrile-Butadiene-Styrene (ABS) is resistant to a wide variety of materials ranging from sewage to commercial household chemical formulations and can be exposed to a wide temperature span.

• 3 in. Inside Diameter and 3.125 in. Outside Diameter
• Made of ABS
• Connects a branch line into a horizontal ABS drain line
• Solvent-welded connections
• Not for use with primer
• NSF/ANSI Standard 14
• UL Listed 94V-0
• "3 I.D. and 3.125 O.D."

The ABS DWV 45 degree street elbow features a spigot x hub connection and is used to change the direction of flow. Acrylonitrile-Butadiene-Styrene (ABS) is resistant to a wide variety of materials ranging from sewage to commercial household chemical formulations and can be exposed to a wide temperature span. ABS DWV is joined by solvent cementing or threading and can easily be connected to steel, copper, or cast iron through the use of transition fittings.

• 11/2 in. Inside Diameter and 1.625 in. Outside Diameter
• ABS construction
• For use with DWV systems to help remove wastewater from plumbing fixtures
• Helps circulate air in drainage piping
• Redirects piping 45 degree
• Solvent weld connections
• Never use a primer with ABS
• Maximum working pressure of 5 psi
• "11/2 I.D. and 1.625 O.D."

The NIBCO 2 in. ABS DWV P-Trap is used in residential and commercial drain, waste and vent systems. The ABS DWV P-Trap features a hub x hub connection and provides a water seal so that wastewater will automatically be trapped in the arc of the configuration, thereby preventing unwanted gases from entering the household environment. Acrylonitrile-Butadiene-Styrene (ABS) is resistant to a wide variety of materials ranging from sewage to commercial household chemical formulations and can be exposed to a wide temperature span.

• 2 in. Inside Diameter and 2.125 in. Outside Diameter
• Do not use primer with ABS
• Used under a plumbing fixture or drain to prevent sewer gas from escaping
• Hub x hub connections
• Solvent-welded connections
• NSF/ANSI Standard 14
• UL Listed 94V-0

The ABS DWV 90 degree vent elbow features a hub x hub connection and the abrupt 90 degree angle is used to change the direction of flow in the venting side of the system. Used in residential and commercial drain, waste and vent systems. Acrylonitrile-Butadiene-Styrene (ABS) is resistant to a wide variety of materials ranging from sewage to commercial household chemical formulations and can be exposed to a wide temperature span.

• 2 in. Inside Diameter and 2.125 in. Outside Diameter
• ABS construction
• For use with drain, waste and vent systems to help remove wastewater from plumbing fixtures
• Helps air circulate in drainage piping
• Solvent welded connections
• Never use a primer with ABS
• Maximum working pressure of 5 psi
• "2 I.D. and 2.125 O.D."

The NIBCO 1-1/2 in. ABS P-Trap is designed to prevent sewer gas from escaping from a plumbing fixture or drain. ABS is lightweight, safe to handle and easy to install. ABS DWV is joined by solvent cementing or threading and can easily be connected to steel, copper, or cast iron through the use of transition fittings.

• Do not use primer with ABS
• Hub x hub connections
• Solvent-welded connections
• NSF/ANSI standard 14
• UL Listed 94V-0
• Maximum working pressure of 5 psi

Use the NIBCO 3 in. ABS DWV 45-Degree Spigot x Hub Street Elbow to change the direction of ABS piping by 45 degrees. The fitting is designed for use in DWV systems to help remove wastewater from plumbing fixtures. ABS DWV is joined by solvent cementing or threading and can easily be connected to steel, copper, or cast iron through the use of transition fittings.

• 3 in. Inside Diameter and 3.125 in. Outside Diameter
• ABS construction
• For use with DWV systems to help remove wastewater from plumbing fixtures
• Helps air circulate in drainage piping
• Changes the direction of ABS piping by 45 degree
• Solvent-welded connections
• Never use a primer with ABS
• Maximum working pressure of 5 psi
• "3 I.D. and 3.125 O.D."

Connect lengths of ABS piping with the NIBCO 3 in. ABS DWV H x H Coupling. The ABS DWV coupling features a hub x hub connection and connects ABS DWV piping lengths with solvent weld connections. Acrylonitrile-Butadiene-Styrene (ABS) is resistant to a wide variety of materials ranging from sewage to commercial household chemical formulations and can be exposed to a wide temperature span.

• 3 in. Inside Diameter and 3.125 in. Outside Diameter
• ABS construction
• Use with drain, waste and vent systems to help remove wastewater from plumbing fixtures
• Connects lengths of ABS piping
• Solvent weld connections
• Not for use with a primer
• Maximum working pressure of 5 psi

The NIBCO 3 in. ABS DWV 90 degree long turn elbow features a hub x hub connection and long radius and is used to change the direction of flow. Acrylonitrile-Butadiene-Styrene (ABS) is resistant to a wide variety of materials ranging from sewage to commercial household chemical formulations and can be exposed to a wide temperature span. ABS is lightweight, safe to handle and easy to install. ABS DWV is joined by solvent cementing or threading and can easily be connected to steel, copper, or cast iron through the use of transition fittings. NIBCO plastic fittings are backed by a 5-year limited warranty.

• 3 in. Inside Diameter and 3.125 in. Outside Diameter
• ABS construction
• For use with DWV systems to help remove wastewater from plumbing fixtures
• Helps air circulate in drainage piping
• Changes the direction of abs piping 90 degree
• Solvent welded connections
• Never use a primer with ABS
• Long-turn design
• Maximum working pressure of 5 psi
• ASTM D2665
• ASTM D2665
• ASTM D3965
• ASTM D2661 and D3311

Connect a branch line into a vertical ABS drain line with the NIBCO 2 in. x 2 in. x 1-1/2 in. ABS DWV Hub x Hub x Hub Sanitary Tee. The tee is designed for use with non-pressurized sanitary systems. ABS is lightweight, safe to handle and easy to install. ABS DWV is joined by solvent cementing or threading and can easily be connected to steel, copper, or cast iron through the use of transition fittings.

• 2 X 2 X 11/2 in. Inside Diameter and 2 1/8 X 2 1/8 X 1 5/8 in. Outside Diameter
• ABS requires no primer
• Connects a branch line into a vertical ABS drain line
• For use with non-pressurized sanitary systems
• Hub x hub x hub solvent-welded connections
• Maximum working pressure of 5 psi
• NSF/ANSI Standard 14
• "2 X 2 X 11/2 I.D. and 2 1/8 X 2 1/8 X 1 5/8 O.D."

The NIBCO 4 in. ABS DWV Hub x Hub Coupling connects lengths of ABS piping use in DWV systems. Be sure, though, never to use a primer on ABS material before solvent cementing. ABS DWV is joined by solvent cementing or threading and can easily be connected to steel, copper, or cast iron through the use of transition fittings.

• 4 in. Inside Diameter and 4.125 in. Outside Diameter
• ABS construction
• For use with DWV systems to help remove wastewater from plumbing fixtures
• Connects lengths of ABS piping
• Solvent weld connections
• Never use a primer with ABS
• Maximum working pressure of 5 psi

The NIBCO ABS DWV long radius combination tee-wye is used in residential and commercial drain, waste and vent systems. The ABS DWV long radius combination tee-wye features a hub x hub x hub connection. The tee-wye allows for a connection to be made in continuous pipe line and branch out to a different direction. Acrylonitrile-Butadiene-Styrene (ABS) is resistant to a wide variety of materials ranging from sewage to commercial household chemical formulations and can be exposed to a wide temperature span. ABS is lightweight, safe to handle and easy to install. ABS DWV is joined by solvent cementing or threading and can easily be connected to steel, copper, or cast iron through the use of transition fittings.

• 3 in. Inside Diameter and 3.125 in. Outside Diameter
• ABS requires no primer
• Use when connecting a horizontal ABS branch line into a vertical ABS drain line
• Use for non-pressurized sanitary systems
• Removes waste water and waterborne wastes from plumbing fixtures and appliances
• Hub x hub x hub solvent-welded connections
• Maximum working pressure of 5 psi
• "3 I.D. and 3.125 O.D."