The 3/4 in. Copper Press x Press Pressure Coupling with Dimple Stop copper press fitting is NSF Listed, lead free and features a robust EPDM O-Rings to ensure a clean leak free seal. Copper press fittings are designed for mechanical connection to ASTM B88-Type K, L and M copper tubing in hard drawn condition. Utilizing a hydraulic press tool, a watertight seal can be made in seconds without no flame, solder or flux. Each press fitting comes standard with leak before press technology to easily identify a fitting that has not been pressed. Connections can be made in wet or dry conditions reducing project downtime. These fittings are available in sizes from 1/2 in. to 1 in. and are compatible with all major hydraulic press tools.

• Connections can be made wet or dry for quick repairs on existing copper piping systems
• Create leak proof and secure connections in seconds
• Flameless press technology eliminates need for burn permits
• Multiple configurations available up from 1/2 in. up to 1 in.
• Certified to NSF/ANSI 61 and 372
• Leak before press technology assist installers in easily identifying unpressed connections
• No special or proprietary jaws are required
• Dezincification resistant
• Operating pressure 300 psi CWP
• Temperature range 32°F to 250°F depending on the application
• Suitable for underground installation
• UPC, cUPC and IPC approved
• Not suitable for steam or flammable gas service
• RIGID is a registered trademark of RIGID Inc.
• ProPress is a registered trademark of Viega NA
• VIRAX is a registered trademark of the Stanley works
• FORCE LOGIC is a trademark of Milwaukee tool
• DEWALT is a registered trademark of the Stanley works

The 3/4 in. Copper Press x Press Repair Coupling with No Stop copper press fitting NSF Listed, lead free and features a robust EPDM O-Rings to ensure a clean leak free seal. Copper press fittings are designed for mechanical connection to ASTM B88-Type K, L and M copper tubing in hard drawn condition. Utilizing a hydraulic press tool, a watertight seal can be made in seconds without no flame, solder or flux. Each press fitting comes standard with leak before press technology to easily identify a fitting that has not been pressed. Connections can be made in wet or dry conditions reducing project downtime. These fittings are available in sizes from 1/2 in. to 1 in. and are compatible with all major hydraulic press tools.

• Connections can be made wet or dry for quick repairs on existing copper piping systems
• Create leak proof and secure connections in seconds
• Flameless press technology eliminates need for burn permits
• Multiple configurations available up from 1/2 in. up to 1 in.
• Certified to NSF/ANSI 61 and 372
• Leak before press technology assist installers in easily identifying unpressed connections
• No special or proprietary jaws are required
• Dezincification resistant
• Operating pressure 300 psi CWP
• Temperature range 32°F to 250°F depending on the application
• Suitable for underground installation
• UPC, cUPC and IPC approved
• Not suitable for steam or flammable gas service
• RIGID is a registered trademark of RIGID Inc.
• ProPress is a registered trademark of Viega NA
• VIRAX is a registered trademark of the Stanley works
• FORCE LOGIC is a trademark of Milwaukee tool
• DEWALT is a registered trademark of the Stanley works

The 1/2 in. Copper Press x Press Repair Coupling with No Stop copper press fitting by Apollo is NSF listed, lead free and features a robust EPDM o-ring to ensure a clean leak free seal. Copper press fittings by Apollo are designed for mechanical connection to ASTM B88-Type K, L, & M copper tubing in hard drawn condition. Utilizing a hydraulic press tool, a watertight seal can be made in seconds without no flame, solder or flux. Each press fitting comes standard with leak before press technology to easily identify a fitting that has not been pressed. Connections can be made in wet or dry conditions reducing project downtime. These fittings are available in sizes from 1/2 in. to 1 in. and are compatible with all major hydraulic press tools.

• Connections can be made wet or dry for quick repairs on existing copper piping systems
• Create leak proof and secure connections in seconds
• Flameless press technology eliminates need for burn permits
• Multiple configurations available up from 1/2 in. up to 1 in.
• Certified to NSF/ANSI 61 and 372
• Leak before press technology assist installers in easily identifying unpressed connections
• No special or proprietary jaws are required
• Dezincification resistant
• Operating pressure 300 psi CWP
• Temperature range 32°F to 250°F depending on the application
• Suitable for underground installation
• UPC, cUPC and IPC approved
• Not suitable for steam or flammable gas service
• RIGID is a registered trademark of RIGID Inc.
• ProPress is a registered trademark of Viega NA
• VIRAX is a registered trademark of the Stanley works
• FORCE LOGIC is a trademark of Milwaukee tool
• DEWALT is a registered trademark of the Stanley works

The 1/2 in. Copper Press x Press Coupling with Dimple Stop copper press fitting is NSF Listed, lead free and features a robust EPDM O-Rings to ensure a clean leak free seal. Copper press fittings are designed for mechanical connection to ASTM B88-Type K, L and M copper tubing in hard drawn condition. Utilizing a hydraulic press tool, a watertight seal can be made in seconds without no flame, solder or flux. Each press fitting comes standard with leak before press technology to easily identify a fitting that has not been pressed. Connections can be made in wet or dry conditions reducing project downtime. These fittings are available in sizes from 1/2 in. to 1 in. and are compatible with all major hydraulic press tools.

• Connections can be made wet or dry for quick repairs on existing copper piping systems
• Create leak proof and secure connections in seconds
• Flameless press technology eliminates need for burn permits
• Multiple configurations available up from 1/2 in. up to 1 in.
• Certified to NSF/ANSI 61 and 372
• Leak before press technology assist installers in easily identifying unpressed connections
• No special or proprietary jaws are required
• Dezincification resistant
• Operating pressure 300 psi CWP
• Temperature range 32°F to 250°F depending on the application
• Suitable for underground installation
• UPC, cUPC and IPC approved
• Not suitable for steam or flammable gas service
• is a registered trademark of RIGID Inc.
• ProPress is a registered trademark of Viega NA
• VIRAX is a registered trademark of the Stanley works
• FORCE LOGIC is a trademark of Milwaukee tool
• DEWALT is a registered trademark of the Stanley works

The 1/2 in. Copper Press x Press Coupling with Dimple Stop copper press fitting is NSF Listed, lead free and features a robust EPDM O-ring to ensure a clean leak free seal. Copper press fittings are designed for mechanical connection to ASTM B88-Type K, L and M copper tubing in hard drawn condition. Utilizing a hydraulic press tool, a watertight seal can be made in seconds without no flame, solder or flux. Each press fitting comes standard with leak before press technology to easily identify a fitting that has not been pressed. Connections can be made in wet or dry conditions reducing project downtime. These fittings are available in sizes from 1/2 in. to 1 in. and are compatible with all major hydraulic press tools. This pro pack of 50 couplings comes packed in a convenient and resealable jar.

• Connections can be made wet or dry for quick repairs on existing copper piping systems
• Create leak proof and secure connections in seconds
• Flameless press technology eliminates need for burn permits
• Multiple configurations available up from 1/2 in. up to 1 in.
• Certified to NSF/ANSI 61 and 372
• Leak before press technology assist installers in easily identifying unpressed connections
• No special or proprietary jaws are required
• Dezincification resistant
• Operating pressure 300 psi CWP
• Temperature range 32°F to 250°F depending on the application
• Suitable for underground installation
• UPC, cUPC and IPC approved
• Not suitable for steam or flammable gas service
• RIGID is a registered trademark of RIGID Inc.
• ProPress is a registered trademark of Viega NA
• VIRAX is a registered trademark of the Stanley Works
• ForceLogic is a trademark of Milwaukee tool
• DEWALT is a registered trademark of the Stanley Works

The 1 in. x 3/4 in. Copper Press x Press Reducing Coupling copper press fitting by Apollo is NSF listed, lead free and features a robust EPDM o-ring to ensure a clean leak free seal. Copper press fittings by Apollo are designed for mechanical connection to ASTM B88-Type K, L, & M copper tubing in hard drawn condition. Utilizing a hydraulic press tool, a watertight seal can be made in seconds without no flame, solder or flux. Each press fitting comes standard with leak before press technology to easily identify a fitting that has not been pressed. Connections can be made in wet or dry conditions reducing project downtime. These fittings are available in sizes from 1/2 in. to 1 in. and are compatible with all major hydraulic press tools.

• Connections can be made wet or dry for quick repairs on existing copper piping systems
• Create leak proof and secure connections in seconds
• Flameless press technology eliminates need for burn permits
• Multiple configurations available up from 1/2 in. up to 1 in.
• Certified to NSF/ANSI 61 and 372
• Leak before press technology assist installers in easily identifying unpressed connections
• No special or proprietary jaws are required
• Dezincification resistant
• Operating pressure 300 psi CWP
• Temperature range 32°F to 250°F depending on the application
• Suitable for underground installation
• UPC, cUPC and IPC approved
• Not suitable for steam or flammable gas service
• RIGID is a registered trademark of RIGID Inc.
• ProPress is a registered trademark of Viega NA
• VIRAX is a registered trademark of the Stanley works
• FORCE LOGIC is a trademark of Milwaukee tool
• DEWALT is a registered trademark of the Stanley works

The 3/4 in. Copper Press x 1/2 in. Press Coupling with Dimple Stop copper press fitting is NSF Listed, lead free and features a robust EPDM O-ring to ensure a clean leak free seal. Copper press fittings are designed for mechanical connection to ASTM B88-Type K, L and M copper tubing in hard drawn condition. Utilizing a hydraulic press tool, a watertight seal can be made in seconds without no flame, solder or flux. Each press fitting comes standard with leak before press technology to easily identify a fitting that has not been pressed. Connections can be made in wet or dry conditions reducing project downtime. These fittings are available in sizes from 1/2 in. to 1 in. and are compatible with all major hydraulic press tools.

• Connections can be made wet or dry for quick repairs on existing copper piping systems
• Create leak proof and secure connections in seconds
• Flameless press technology eliminates need for burn permits
• Multiple configurations available up from 1/2 in. up to 1 in.
• Certified to NSF/ANSI 61 and 372
• Leak before press technology assist installers in easily identifying unpressed connections
• No special or proprietary jaws are required
• Dezincification resistant
• Operating pressure 300 psi CWP
• Temperature range 32°F to 250°F depending on the application
• Suitable for underground installation
• UPC, cUPC and IPC approved
• Not suitable for steam or flammable gas service
• RIGID is a registered trademark of RIGID Inc.
• ProPress is a registered trademark of viega NA
• VIRAX is a registered trademark of the stanley works
• ForceLogic is a trademark of Milwaukee tool
• DEWALT is a registered trademark of the stanley works

The 3/4 in. Copper Press x Press Pressure Coupling with Dimple Stop copper press fitting is NSF Listed, lead free and features a robust EPDM O-ring to ensure a clean leak free seal. Copper press fittings are designed for mechanical connection to ASTM B88-Type K, L and M copper tubing in hard drawn condition. Utilizing a hydraulic press tool, a watertight seal can be made in seconds without no flame, solder or flux. Each press fitting comes standard with leak before press technology to easily identify a fitting that has not been pressed. Connections can be made in wet or dry conditions reducing project downtime. These fittings are available in sizes from 1/2 in. to 1 in. and are compatible with all major hydraulic press tools. This pro pack of 20 couplings comes packed in a convenient and resealable jar.

• Connections can be made wet or dry for quick repairs on existing copper piping systems
• Create leak proof and secure connections in seconds
• Flameless press technology eliminates need for burn permits
• Multiple configurations available up from 1/2 in. up to 1 in.
• Certified to NSF/ANSI 61 and 372
• Leak before press technology assist installers in easily identifying unpressed connections
• No special or proprietary jaws are required
• Dezincification resistant
• Operating pressure 300 psi CWP
• Temperature range 32°F to 250°F depending on the application
• Suitable for underground installation
• UPC, cUPC and IPC approved
• Not suitable for steam or flammable gas service
• RIGID is a registered trademark of RIGID Inc.
• ProPress is a registered trademark of Viega NA
• VIRAX is a registered trademark of the Stanley Works
• ForceLogic is a trademark of Milwaukee tool
• DEWALT is a registered trademark of the Stanley Works

The 1 in. Copper Press x Press Repair Coupling with No Stop copper press fitting by Apollo is NSF listed, lead free and features a robust EPDM o-ring to ensure a clean leak free seal. Copper press fittings by Apollo are designed for mechanical connection to ASTM B88-Type K, L, & M copper tubing in hard drawn condition. Utilizing a hydraulic press tool, a watertight seal can be made in seconds without no flame, solder or flux. Each press fitting comes standard with leak before press technology to easily identify a fitting that has not been pressed. Connections can be made in wet or dry conditions reducing project downtime. These fittings are available in sizes from 1/2 in. to 1 in. and are compatible with all major hydraulic press tools.

• Connections can be made wet or dry for quick repairs on existing copper piping systems
• Create leak proof and secure connections in seconds
• Flameless press technology eliminates need for burn permits
• Multiple configurations available up from 1/2 in. up to 1 in.
• Certified to NSF/ANSI 61 and 372
• Leak before press technology assist installers in easily identifying unpressed connections
• No special or proprietary jaws are required
• Dezincification resistant
• Operating pressure 300 psi CWP
• Temperature range 32°F to 250°F depending on the application
• Suitable for underground installation
• UPC, cUPC and IPC approved
• Not suitable for steam or flammable gas service
• RIGID is a registered trademark of RIGID Inc.
• ProPress is a registered trademark of Viega NA
• VIRAX is a registered trademark of the Stanley works
• FORCE LOGIC is a trademark of Milwaukee tool
• DEWALT is a registered trademark of the Stanley works

The 1 in. Copper Press x Press Coupling with Dimple Stop copper press fitting is NSF listed, lead free and features a robust EPDM O-Rings to ensure a clean leak free seal. Copper press fittings are designed for mechanical connection to ASTM B88-Type K, L and M copper tubing in hard drawn condition. Utilizing a hydraulic press tool, a watertight seal can be made in seconds without no flame, solder or flux. Each press fitting comes standard with leak before press technology to easily identify a fitting that has not been pressed. Connections can be made in wet or dry conditions reducing project downtime. These fittings are available in sizes from 1/2 in. to 1 in. and are compatible with all major hydraulic press tools.

• Connections can be made wet or dry for quick repairs on existing copper piping systems
• Create leak proof and secure connections in seconds
• Flameless press technology eliminates need for burn permits
• Multiple configurations available up from 1/2 in. up to 1 in.
• Certified to NSF/ANSI 61 and 372
• Leak before press technology assist installers in easily identifying unpressed connections
• No special or proprietary jaws are required
• Dezincification resistant
• Operating pressure 300 psi CWP
• Temperature range 32°F to 250°F depending on the application
• Suitable for underground installation
• UPC, cUPC and IPC approved
• Not suitable for steam or flammable gas service
• Rigid is a registered trademark of Rigid Inc.
• ProPress is a registered trademark of Viega NA
• VIRAX is a registered trademark of the Stanley works
• FORCE LOGIC is a trademark of Milwaukee tool
• DEWALT is a registered trademark of the Stanley works