Dwv Elbows
The NIBCO 3 in. PVC DWV 90 degree Hub x Hub Elbow is designed for use with DWV systems to help remove wastewater from plumbing fixtures. The fitting features a PVC construction that requires a primer before solvent cementing. PVC DWV is easy to install and is joined by solvent cementing or threading. PVC fittings exhibit high corrosion and chemical resistance and will not rust, scale, pit or corrode.
- PVC construction
- For use with DWV systems to help remove wastewater from plumbing fixtures
- Helps air circulate in drainage piping
- Solvent weld connections
- Apply a primer to the PVC before cementing
- Maximum working pressure of 5 psi
Complete the installation of your non-pressurized drain, waste and vent system with the NIBCO 2 in. PVC DWV 45 degree Spigot x Hub Street Elbow. This PVC fitting changes the direction of piping 45 degree .
- PVC construction
- For use with non-pressurized drain, waste and vent systems to help remove wastewater from plumbing fixtures
- Solvent welded connections
- Apply a primer to the PVC before cementing
- Maximum working pressure of 5 psi
Install the NIBCO 3 in. PVC DWV 45 degree Spigot x Hub Street Elbow to help remove wastewater from plumbing fixtures and appliances. This durable plastic elbow provides air circulation within piping and is designed for use in non-pressurized sanitary system DWV applications. PVC DWV is easy to install and is joined by solvent cementing or threading.
- PVC plastic construction
- Changes the direction of piping by 45 degree
- Suitable for use in non-pressurized sanitary system DWV applications
- Provides air circulation within piping
- (1) 3 in. spigot connection and one 3 in. hub connection
- Solvent-welded connections
- Requires a primer (sold separately) before cementing
- 5 psi maximum working pressure
Install the NIBCO 1-1/2 in. PVC DWV 45 degree Spigot x Hub Street Elbow to remove wastewater from plumbing fixtures and appliances. This durable plastic elbow provides air circulation within piping and is designed for use in non-pressurized sanitary system DWV applications. PVC DWV is easy to install and is joined by solvent cementing or threading.
- PVC plastic construction
- Changes the direction of piping by 45 degree
- Suitable for use in non-pressurized sanitary system DWV applications
- Provides air circulation within piping
- 1 spigot connection, 1 hub connection
- Solvent-welded connections
- Requires a primer (sold separately) before cementing
- 5 psi maximum working pressure
Use the NIBCO 4 in. PVC DWV 45 degree Spigot x Hub Street Elbow to help complete the installation of your DWV system. The fitting features a PVC construction that requires a primer before solvent cementing. PVC DWV is easy to install and is joined by solvent cementing or threading.
- PVC construction
- For use with DWV systems to help remove wastewater from plumbing fixtures
- Helps air circulate in drainage piping
- Changes the direction of piping 45 degree
- Solvent weld connections
- Apply a primer to the PVC before cementing
Use the NIBCO 2 in. PVC DWV 90 degree Spigot x Hub Street Elbow to complete installation of DWV system. The fitting features a PVC construction and changes the direction of PVC piping 90 degree . PVC DWV is easy to install and is joined by solvent cementing or threading.
- PVC construction
- For use with DWV systems to help remove wastewater from plumbing fixtures
- Helps air circulate in drainage piping
- Changes the direction of PVC piping 90 degree
- Solvent weld connections
- Apply a primer to PVC before cementing
Use the NIBCO 1-1/2 PVC DWV 90 degree Spigot x Hub Street Elbow to help complete the installation of your DWV system. The fitting features a PVC construction and changes the direction of PVC piping 90 degree . PVC fittings exhibit high corrosion and chemical resistance and will not rust, scale, pit or corrode.
- PVC construction
- For use with DWV systems to help remove wastewater from plumbing fixtures
- Solvent weld connections
- Apply a primer to the PVC before cementing
- Maximum working pressure of 5 psi
Use the NIBCO 3 in. PVC DWV 90 degree Spigot x Hub Street Elbow with your DWV system to help remove wastewater from plumbing fixtures. The fitting features a PVC construction that requires a primer before solvent cementing. PVC DWV is easy to install and is joined by solvent cementing or threading.
- PVC construction
- For use with DWV systems to help remove wastewater from plumbing systems
- Helps air circulate in drainage piping
- Changes the direction of PVC piping 90 degree
- Solvent weld connections
- Apply a primer to the PVC before cementing
- Maximum working pressure of 5 psi
The NIBCO 1-1/2 in. PVC DWV 22-1/2- street elbow features a spigot x hub connection and is used to change the direction of flow. Polyvinyl chloride (PVC) is the most frequently specified of all thermoplastic materials because of its light weight, durability, and cost-effectiveness. PVC fittings exhibit high corrosion and chemical resistance and will not rust, scale, pit or corrode.
- Changes direction of PVC piping 22-1/2 degree from a fitting hub to PVC pipe size
- Solvent welded connections
- PVC requires a primer before cementing
- Smooth interior finish for reduced friction and material buildup
- Helps remove waste water and waterborne wastes from plumbing fixtures and appliances
- Do not test or use with compressed air or other gases
- Maximum service temperature 140 degree F
- NSF/ANSI standard 14
- UL Listed 94V-0
The NIBCO 2 in. PVC DWV 90 degree long turn street elbow features a spigot x hub connection and long radius and is used to change the direction of flow. Please refer to NIBCO technical data sheets and catalogs for engineering and installation information. Polyvinyl chloride (PVC) is the most frequently specified of all thermoplastic materials because of its light weight, durability, and cost-effectiveness. PVC DWV is easy to install and is joined by solvent cementing or threading. PVC fittings exhibit high corrosion and chemical resistance and will not rust, scale, pit or corrode.
- Not for use with compressed air or other gases
- ASTM D2665 and D3311
- NSF/ANSI standard 14
- Maximum service temperature 140 degree F
- UL Listed 94V-0
- Size range 1-1/4 in. to 4 in.
The NIBCO 2 in. PVC DWV 22-1/2 Hub x Spigot Street Elbow. DWV is used for non pressurized sanitary system Drain, Waste, and Vent. There are 2 types of DWV plastic: ABS (black plastic) and PVC (white plastic). The sanitary drainage and vent piping are installed to remove waste water and water-borne wastes from the plumbing fixtures and appliances. DWV also provides a circulation of air within the drainage piping. ABS (black) and PVC (white) plastic pipe and fittings have identical uses.
- Changes direction of PVC piping 22-1/2 in. from a fitting hub to PVC pipe size
- Solvent welded connections
- PVC requires a primer before cementing
- Smooth interior finish for reduced friction and material buildup
- Helps remove waste water and waterborne wastes from plumbing fixtures and appliances
- Do not test or use with compressed air or other gases
- Maximum service temperature 140 degree F
The NIBCO PVC DWV 90 degree vent elbow is used in residential and commercial drain, waste and vent systems. The PVC DWV 90 degree vent elbow features a hub x hub connection and the abrupt 90 degree angle is used to change the direction of flow in the venting side of the system. Please refer to NIBCO technical data sheets and catalogs for engineering and installation information.
- Changes direction in vent piping 90 degree
- Solvent welded connections
- PVC requires a primer before cementing
- Maximum service temperature 140 degree F
- Not for use with compressed air or other gases
- NSF/ANSI standard 14
- UL Listed 94V-0
- NSF U.P. certified
The NIBCO 3 in. PVC DWV 22-1/2 Hub x Spigot Street Elbow. DWV is used for non pressurized sanitary system Drain, Waste, and Vent. There are 2 types of DWV plastic: ABS (black plastic) and PVC (white plastic). The sanitary drainage and vent piping are installed to remove waste water and water-borne wastes from the plumbing fixtures and appliances. DWV also provides a circulation of air within the drainage piping. ABS (black) and PVC (white) plastic pipe and fittings have identical uses. The only reason for selecting 1 material over another is either the cost of the material or local plumbing code restrictions.
- Changes direction of PVC piping 22-1/2 degree
- Solvent welded connections
- PVC requires a primer before cementing
- Smooth interior finish for reduced friction and material buildup
- Helps remove waste water and waterborne wastes from plumbing fixtures and appliances
- Do not test or use with compressed air or other gases
- Maximum service temperature 140 degree F
The NIBCO 4 in. PVC DWV 22-1/2 (1/16 Bend) Hub x Spigot Street Elbow. DWV is used for non pressurized sanitary system Drain, Waste, and Vent. The sanitary drainage and vent piping are installed to remove waste water and water-borne wastes from the plumbing fixtures and appliances. DWV also provides a circulation of air within the drainage piping. ABS (black) and PVC (white) plastic pipe and fittings have identical uses.
- Changes direction of PVC piping 22-1/2 degree from a fitting hub to PVC pipe size
- Solvent welded connections
- PVC requires a primer before cementing
- Smooth interior finish for reduced friction and material buildup
- Helps remove waste water and waterborne wastes from plumbing fixtures and appliances
- Do not test or use with compressed air or other gases
- Maximum service temperature 140 degree F
The NIBCO 3 in. PVC DWV 90 degree Long Turn Street Elbow features a spigot x hub connection and long radius and is used to change the direction of flow. The NIBCO PVC DWV 90 degree long turn street elbow is used in residential and commercial drain, waste and vent systems. PVC fittings exhibit high corrosion and chemical resistance and will not rust, scale, pit or corrode.
- Polyvinyl chloride (PVC) is the most frequently specified of all thermoplastic materials because of its light weight, durability, and cost-effectiveness
- PVC DWV is easy to install and is joined by solvent cementing or threading
- NSF/ANSI standard 14
- ASTM D2665 and D3311
- UL Listed 94V-0
- Maximum pressure 5 psi
With the NIBCO 4 in. PVC DWV 90 degree Spigot x Hub Street Elbow, you can complete the installation of your DWV system. PVC construction helps air circulate in drainage piping, but be sure to apply a primer to the PVC before solvent cementing. PVC fittings exhibit high corrosion and chemical resistance and will not rust, scale, pit or corrode.
- PVC construction
- For use with DWV systems to help remove wastewater from plumbing systems
- Helps circulate air in drainage piping
- Changes the direction of PVC piping 90 degree
- Solvent welded connections
- Apply a primer to PVC before cementing
- Maximum working pressure of 5 psi
Nibco 2" X 2" X 1-1/2" DWV PVC Hub Long Radius Combination Tee-Wye. Maximum Service Temperature 140degree f. Do not test or use with compressed air or other gases. ASTM D2665 and D3311. NSF/ANSI Standard 14. UL Listed 94V-0. NSF U.P. Certified. Mfg #K15715I
- Maximum Service Temperature 140degree f
- Do not test or use with compressed air or other gases
- ASTM D2665 and D3311
- NSF/ANSI Standard 14
The NIBCO 1-1/2 in. PVC DWV 90 degree Hub x Hub Vent Elbow. DWV is used for non pressurized sanitary system Drain, Waste, and Vent. There are 2 types of DWV plastic: ABS (black plastic) and PVC (white plastic). The sanitary drainage and vent piping are installed to remove waste water and water-borne wastes from the plumbing fixtures and appliances. DWV also provides a circulation of air within the drainage piping.
- Changes direction in vent piping 90 degree
- Maximum working pressure of 5 psi
- PVC requires a primer before cementing
- Solvent weld connections
- ABS (black) and PVC (white) plastic pipe and fittings have identical uses the only reason for selecting 1 material over another is either the cost of the material or local plumbing code restrictions
- NSF/ANSI standard 14
- UL Listed 94V-1
- NSF U.P. certified
Nibco 1-1/2" PVC DWV 60-Degree Hub X Hub Elbow Fitting. Maximum Service Temperature 140degree f. Do not test or use with compressed air or other gases. ASTM D2665 and D3311. NSF/ANSI Standard 14. UL Listed 94V-0. NSF U.P. Certified. Mfg #K44030I
- Maximum Service Temperature 140degree f
- Do not test or use with compressed air or other gases
- ASTM D2665 and D3311
- NSF/ANSI Standard 14
Nibco 3" PVC DWV 90-Degree Hub X Hub Vent Elbow. Maximum Service Temperature 140degree f. Not for use with compressed air or other gases. ASTM D2665 and D3311. NSF/ANSI Standard 14. UL Listed 94V-0. NSF U.P. Certified. Mfg #K05360I
- Maximum Service Temperature 140degree f
- Not for use with compressed air or other gases
- ASTM D2665 and D3311
- NSF/ANSI Standard 14
Nibco 2" PVC DWV 60-Degree Hub X Hub Elbow Fitting. Maximum Service Temperature 140degree f. Do not test or use with compressed air or other gases. ASTM D2665 and D3311. NSF/ANSI Standard 14. UL Listed 94V-0. NSF U.P. Certified. Mfg #K44035I
- Maximum Service Temperature 140degree f
- Do not test or use with compressed air or other gases
- ASTM D2665 and D3311
- NSF/ANSI Standard 14
Nibco 1-1/2" DWV PVC 90 Degree Hub X Hub X Hub Double Elbw. Maximum Service Temperature 140degree f. Do not test or use with compressed air or other gases. ASTM D2665 and D3311. NSF/ANSI Standard 14. UL Listed 94V-0. NSF U.P. Certified. Mfg #K28530I
- Maximum Service Temperature 140degree f
- Do not test or use with compressed air or other gases
- ASTM D2665 and D3311
- NSF/ANSI Standard 14
Nibco 1-1/2 " PVC DWV All Hub Long-Radius Combination Tee-Wye Fitting. Maximum Service Temperature 140degree f. Do not test or use with compressed air or other gases. ASTM D2665 and D3311. NSF/ANSI Standard 14. UL Listed 94V-0. NSF U.P. Certified. Mfg #K15705I
- Maximum Service Temperature 140degree f
- Do not test or use with compressed air or other gases
- ASTM D2665 and D3311
- NSF/ANSI Standard 14
Nibco 3" PVC DWV 60-Degree Hub X Hub Elbow Fitting. Maximum Service Temperature 140degree f. Do not test or use with compressed air or other gases. ASTM D2665 and D3311. NSF/ANSI Standard 14. UL Listed 94V-0. NSF U.P. Certified. Mfg #K44040I
- Maximum Service Temperature 140degree f
- Do not test or use with compressed air or other gases
- ASTM D2665 and D3311
- NSF/ANSI Standard 14