This 1/2 in. Polyethylene 90-Degree Insert x Insert Elbow is used to install pool, well, pond and submersible pumps (pumps not included). The elbow features polyethylene construction.

• Use to install pool pumps, well pumps, pond pumps and submersible pumps (pumps not included)
• Installs with stainless-steel clamps (not included)
• Polyethylene construction
• Corrosion- and chemical resistant
• Cold-water pressure for sprinklers and irrigation

This 1/2 in. Polyethylene 90 Insert x MPT Male Elbow is corrosion- and chemical resistant. The elbow features polypropylene construction. Is installed with stainless-steel clamps (not included).

• Use to install pool pumps, well pumps, pond pumps and submersible pumps (pumps not included)
• Installs with stainless-steel clamps (not included)
• Polyethylene construction
• Corrosion- and chemical resistant
• Cold-water pressure for sprinklers and irrigation
• Rated for under ground use

Cold water pressure for sprinkler and irrigation. Used to change direction. Adapts to standard male pipe threads.

• Use with PE pipe
• install with stainless steel clamps
• Used to install pool, well, pond, and submersible pumps
• Corrosion and chemical resistant

This innovative and patented Twist-In polypropylene 1 in. barb x 1/2 in. female pipe thread adapter elbow can be used to connect polyethylene pipe to a male threaded connection originating from a valve or alternative type of male threaded fitting. There is no restriction on the number of connections that can be made to achieve desire pipe length. For an additionally secure connection is recommended that stainless steel clamps are used to secure fitting to pipe.

• Made from polypropylene plastic
• Not compatible with compressed air or gases
• Designed for easy installation without tools
• Patented double-helix design makes secure connections very easy
• For use with polypropylene pipe
• 100% corrosion resistant
• ASTM D-2609 ANSI/NSF 14 and 28
• By twisting the fitting clockwise, completion of a secure connection is easier than before
• Cold water use only

This innovative and patented Twist-In polypropylene 1 in. female pipe thread adapter elbow can be used to connect polyethylene pipe to a male threaded connection originating from a valve or alternative type of male threaded fitting. There is no restriction on the number of connections that can be made to achieve desire pipe length. For an additionally secure connection is recommended that stainless steel clamps are used to secure fitting to pipe.

• Made from polypropylene plastic
• Not compatible with compressed air or gases
• Designed for easy installation without tools
• Patented double-helix design makes secure connections very easy
• For use with polypropylene pipe
• 100% corrosion resistant
• ASTM D-2609 ANSI/NSF 14 and 27
• By twisting the fitting clockwise, completion of a secure connection is easier than before
• Cold water use only

This innovative and patented Twist-In polypropylene 1/2 in. elbow connects 2-sections of IPS-sized polyethylene pipe or hose to one another. There is no restriction on the number of connections that can be made to achieve desire pipe length. For an additionally secure connection is recommended that stainless steel clamps are used to secure fitting to pipe.

• Made from polypropylene plastic
• Not compatible with compressed air or gases
• Designed for easy installation without tools
• Patented double-helix design makes secure connections very easy
• For use with polyethylene pipe
• 100% corrosion resistant
• ASTM D-2609 ANSI/NSF 14 and 18
• By twisting the fitting clockwise, completion of a secure connection is easier than before
• Cold water use only

This innovative and patented Twist-In polypropylene 1 in. male pipe thread adapter elbow can be used to connect polyethylene pipe to a male threaded connection originating from a valve or alternative type of female threaded fitting. There is no restriction on the number of connections that can be made to achieve desire pipe length. For an additionally secure connection is recommended that stainless steel clamps are used to secure fitting to pipe.

• Made from polypropylene plastic
• Not compatible with compressed air or gases
• Designed for easy installation without tools
• Patented double-helix design makes secure connections very easy
• For use with polypropylene pipe
• 100% corrosion resistant
• ASTM D-2609 ANSI/NSF 14 and 49
• By twisting the fitting clockwise, completion of a secure connection is easier than before
• Cold water use only

This innovative and patented Twist-In polypropylene 3/4 in. elbow connects 2-sections of IPS-sized polyethylene pipe or hose to one another. There is no restriction on the number of connections that can be made to achieve desire pipe length. For an additionally secure connection is recommended that stainless steel clamps are used to secure fitting to pipe.

• Made from polypropylene plastic
• Not compatible with compressed air or gases
• Designed for easy installation without tools
• Patented double-helix design makes secure connections very easy
• For use with polypropylene pipe
• 100% corrosion resistant
• ASTM D-2609 ANSI/NSF 14 and 21
• By twisting the fitting clockwise, completion of a secure connection is easier than before
• Cold water use only

This innovative and patented Twist-In polypropylene 1/2 in. male pipe thread adapter elbow can be used to connect polyethylene pipe to a female threaded connection originating from a valve or alternative type of male threaded fitting. There is no restriction on the number of connections that can be made to achieve desire pipe length. For an additionally secure connection is recommended that stainless steel clamps are used to secure fitting to pipe.

• Made from polypropylene plastic
• Not compatible with compressed air or gases
• Designed for easy installation without tools
• Patented double-helix design makes secure connections very easy
• For use with polypropylene pipe
• 100% corrosion resistant
• ASTM D-2609 ANSI/NSF 14 and 50
• By twisting the fitting clockwise, completion of a secure connection is easier than before
• Cold water use only

This innovative and patented Twist-In polypropylene 3/4 in. barb x 1/2 in. female pipe thread adapter elbow can be used to connect polyethylene pipe to a male threaded connection originating from a valve or alternative type of male threaded fitting. There is no restriction on the number of connections that can be made to achieve desire pipe length. For an additionally secure connection is recommended that stainless steel clamps are used to secure fitting to pipe.

• Made from polypropylene plastic
• Not compatible with compressed air or gases
• Designed for easy installation without tools
• Patented double-helix design makes secure connections very easy
• For use with polypropylene pipe
• 100% corrosion resistant
• ASTM D-2609 ANSI/NSF 14 and 30
• By twisting the fitting clockwise, completion of a secure connection is easier than before
• Cold water use only

This innovative and patented Twist-In polypropylene 1 in. barb x 3/4 in. female pipe thread adapter elbow can be used to connect polyethylene pipe to a male threaded connection originating from a valve or alternative type of male threaded fitting. There is no restriction on the number of connections that can be made to achieve desire pipe length. For an additionally secure connection is recommended that stainless steel clamps are used to secure fitting to pipe.

• Made from polypropylene plastic
• Not compatible with compressed air or gases
• Designed for easy installation without tools
• Patented double-helix design makes secure connections very easy
• For use with polypropylene pipe
• 100% corrosion resistant
• ASTM D-2609 ANSI/NSF 14 and 31
• By twisting the fitting clockwise, completion of a secure connection is easier than before
• Cold water use only

This innovative and patented Twist-In polypropylene 1 in. elbow connects 2-sections of IPS-sized polyethylene pipe or hose to one another. There is no restriction on the number of connections that can be made to achieve desire pipe length. For an additionally secure connection is recommended that stainless steel clamps are used to secure fitting to pipe.

• Made from polypropylene plastic
• Not compatible with compressed air or gases
• Designed for easy installation without tools
• Patented double-helix design makes secure connections very easy
• For use with polyethylene pipe
• 100% corrosion resistant
• ASTM D-2609 ANSI/NSF 14 and 17
• By twisting the fitting clockwise, completion of a secure connection is easier than before
• Cold water use only

This innovative and patented Twist-In polypropylene 1/2 in. female pipe thread adapter elbow can be used to connect polyethylene pipe to a male threaded connection originating from a valve or alternative type of male threaded fitting. There is no restriction on the number of connections that can be made to achieve desire pipe length. For an additionally secure connection is recommended that stainless steel clamps are used to secure fitting to pipe.

• Made from polypropylene plastic
• Not compatible with compressed air or gases
• Designed for easy installation without tools
• Patented double-helix design makes secure connections very easy
• For use with polypropylene pipe
• 100% corrosion resistant
• ASTM D-2609 ANSI/NSF 14 and 29
• By twisting the fitting clockwise, completion of a secure connection is easier than before
• Cold water use only

This innovative and patented Twist-In polypropylene 1-1/4 in. elbow connects 2-sections of IPS-sized polyethylene pipe or hose to one another. There is no restriction on the number of connections that can be made to achieve desire pipe length. For an additionally secure connection is recommended that stainless steel clamps are used to secure fitting to pipe.

• Made from polypropylene plastic
• Not compatible with compressed air or gases
• Designed for easy installation without tools
• Patented double-helix design makes secure connections very easy
• For use with polypropylene pipe
• 100% corrosion resistant
• ASTM D-2609 ANSI/NSF 14 and 19
• By twisting the fitting clockwise, completion of a secure connection is easier than before
• Cold water use only

This innovative and patented Twist-In polypropylene 3/4 in. male pipe thread adapter elbow can be used to connect polyethylene pipe to a male threaded connection originating from a valve or alternative type of male threaded fitting. There is no restriction on the number of connections that can be made to achieve desire pipe length. For an additionally secure connection is recommended that stainless steel clamps are used to secure fitting to pipe.

• Made from polypropylene plastic
• Not compatible with compressed air or gases
• Designed for easy installation without tools
• Patented double-helix design makes secure connections very easy
• For use with polypropylene pipe
• 100% corrosion resistant
• ASTM D-2609 ANSI/NSF 14 and 51
• By twisting the fitting clockwise, completion of a secure connection is easier than before
• Cold water use only

This innovative and patented Twist-In polypropylene 1-1/2 in. elbow connects 2-sections of IPS-sized polyethylene pipe or hose to one another. There is no restriction on the number of connections that can be made to achieve desire pipe length. For an additionally secure connection is recommended that stainless steel clamps are used to secure fitting to pipe.

• Made from polypropylene plastic
• Not compatible with compressed air or gases
• Designed for easy installation without tools
• Patented double-helix design makes secure connections very easy
• For use with polyethylene pipe
• 100% corrosion resistant
• ASTM D-2609 ANSI/NSF 14 and 18
• By twisting the fitting clockwise, completion of a secure connection is easier than before
• Cold water use only

This innovative and patented Twist-In polypropylene 3/4 in. female pipe thread adapter elbow can be used to connect polyethylene pipe to a male threaded connection originating from a valve or alternative type of male threaded fitting. There is no restriction on the number of connections that can be made to achieve desire pipe length. For an additionally secure connection is recommended that stainless steel clamps are used to secure fitting to pipe.

• Made from polypropylene plastic
• Not compatible with compressed air or gases
• Designed for easy installation without tools
• Patented double-helix design makes secure connections very easy
• For use with polypropylene pipe
• 100% corrosion resistant
• ASTM D-2609 ANSI/NSF 14 and 32
• By twisting the fitting clockwise, completion of a secure connection is easier than before
• Cold water use only