The NIBCO 1-1/2 in. ABS DWV Trap SPG x SJ Street Adapter is used in a non-pressurized sanitary system to adapt a fitting hub to a tubular trap at the floor or wall. Drain, Waste and Vent (DWV) allows removal of waste water and water-borne waste away from appliances and fixtures. ABS is lightweight, safe to handle and easy to install.

• 11/2 in. Inside Diameter and 1.625 in. Outside Diameter
• ABS plastic material
• For above-ground DWV
• ABS solvent welds to fitting hub and incorporates slip joint for tubular traps
• Do not use primer with ABS
• NSF/ANSI Standard 14
• UL Listed 94V-0
• "11/2 I.D. and 1.625 O.D."

The NIBCO 1-1/2 in. PVC DWV P-Trap with union joint is used in residential and commercial drain, waste and vent systems. The PVC DWV P-Trap features a union joint and hub x hub connection. The P-Trap provides a water seal so that wastewater will automatically be trapped in the arc of the configuration, thereby preventing unwanted gases from entering the household environment.

• PVC requires a primer before cementing
• Use under the discharge of a plumbing fixture or drain to help prevent sewer gas from escaping
• For use with non-pressurized sanitary systems
• Maximum working pressure of 5 psi
• Hub x hub solvent-welded connections
• Includes union joint

The NIBCO 1-1/2 in. ABS P-Trap is designed to prevent sewer gas from escaping from a plumbing fixture or drain. ABS is lightweight, safe to handle and easy to install. ABS DWV is joined by solvent cementing or threading and can easily be connected to steel, copper, or cast iron through the use of transition fittings.

• Do not use primer with ABS
• Hub x hub connections
• Solvent-welded connections
• NSF/ANSI standard 14
• UL Listed 94V-0
• Maximum working pressure of 5 psi

Help prevent sewer gas from escaping by installing the NIBCO 1-1/2 in. ABS DWV Hub x Hub P-Trap under the discharge of a plumbing fixture or drain. The p-trap features hub x hub connections. ABS DWV is joined by solvent cementing or threading and can easily be connected to steel, copper, or cast iron through the use of transition fittings.

• ABS requires no primer
• Use under the discharge of a plumbing fixture or drain to help prevent sewer gas from escaping
• For use with non-pressurized sanitary systems
• Maximum working pressure of 5 psi
• Hub x hub solvent-welded connections
• NSF/ANSI standard 14
• UL Listed 94V-0

The NIBCO PVC DWV P-Trap is used in residential and commercial drain, waste and vent systems. The PVC DWV P-Trap features a hub x hub connection and provides a water seal so that wastewater will automatically be trapped in the arc of the configuration, thereby preventing unwanted gases from entering the household environment. Polyvinyl chloride (PVC) is the most frequently specified of all thermoplastic materials because of its light weight, durability, and cost-effectiveness.

• PVC requires a primer before cementing
• Use under the discharge of a plumbing fixture or drain to help prevent sewer gas from escaping
• For use with non-pressurized sanitary systems
• Hub x hub solvent-welded connections
• Maximum working pressure of 5 psi
• NSF/ANSI standard 14

The NIBCO 2 in. PVC DWV Hub x Hub P-Trap can be used under the discharge of a plumbing fixture or drain to help prevent sewer gas from escaping. The trap is designed for non-pressurized sanitary systems. PVC fittings exhibit high corrosion and chemical resistance and will not rust, scale, pit or corrode.

• PVC requires a primer before cementing
• Use under the discharge of a plumbing fixture or drain to help prevent sewer gas from escaping
• For non-pressurized sanitary systems
• Hub x hub solvent-welded connections
• Maximum working pressure of 5 psi
• Includes union

The NIBCO 1-1/2 in. ABS DWV Hub x Slip P-Trap allows for disassembly without cutting into the system. The P-trap has a maximum working pressure of 5 psi. ABS DWV is joined by solvent cementing or threading and can easily be connected to steel, copper, or cast iron through the use of transition fittings.

• ABS requires no primer
• Use under the discharge of a plumbing fixture or drain to prevent sewer gas from escaping
• Allows for disassembly without cutting into the system
• Hub x slip solvent-welded connections
• Maximum working pressure of 5 psi
• Includes union

The NIBCO 4 in. PVC DWV P-Trap features a hub x hub connection and provides a water seal so that wastewater will automatically be trapped in the arc of the configuration, thereby preventing unwanted gases from entering the household environment. The NIBCO PVC DWV P-Trap is used in residential and commercial drain, waste and vent systems. Polyvinyl chloride (PVC) is the most frequently specified of all thermoplastic materials because of its light weight, durability, and cost-effectiveness.

• 4 in. Inside Diameter and 4.125 in. Outside Diameter
• Used under discharge of a plumbing fixture or drain to prevent sewer gas from escaping
• PVC DWV is easy to install and is joined by solvent cementing or threading
• PVC fittings exhibit high corrosion and chemical resistance and will not rust, scale, pit or corrode
• Maximum service temperature 140F
• ASTM D2665 and D3311
• NSF/ANSI Standard 14
• UL Listed 94V-0
• NSF U.P. Certified

The NIBCO 1-1/2 in. ABS DWV P-Trap with union joint is used in residential and commercial drain, waste and vent systems. The ABS DWV P-Trap features a union joint and hub x hub connection. The P-Trap provides a water seal so that wastewater will automatically be trapped in the arc of the configuration, thereby preventing unwanted gases from entering the household environment.

• 2 in. Inside Diameter and 2.125 in. Outside Diameter
• ABS requires no primer
• Use under the discharge of a plumbing fixture or drain to help prevent sewer gas from escaping
• Use in conjunction with a closet flange
• Helps allow for disassembly without cutting into the system
• For use with non-pressurized sanitary systems
• Hub x hub solvent-welded connections
• Maximum working pressure of 5 psi
• Includes union

The NIBCO PVC DWV P-Trap with union joint is used in residential and commercial drain, waste and vent systems. The PVC DWV P-Trap features a hub x slip joint connection with L.A. Pattern union joint that is used when local code does not permit the use of slip coupled traps. The P-Trap provides a water seal so that wastewater will automatically be trapped in the arc of the configuration, thereby preventing unwanted gases from entering the household environment. Please refer to NIBCO technical data sheets and catalogs for engineering and installation information. Polyvinyl chloride (PVC) is the most frequently specified of all thermoplastic materials because of its light weight, durability and cost-effectiveness. PVC DWV is easy to install and is joined by solvent cementing or threading. PVC fittings exhibit high corrosion and chemical resistance and will not rust, scale, pit or corrode.

• 11/2 OR 11/2 X 11/4 in. Inside Diameter and 1 5/8 x 1 5/8 or 1 3/8 in. Outside Diameter
• Features a hub x slip joint connection with L.A. pattern union joint
• NSF U.P. certified
• Maximum service temperature of 140 degree F
• Do not test or use with compressed air or other gases
• ASTM D2665 and D3311
• NSF/ANSI standard 14
• UL Listed 94V-0

The NIBCO 3 in. PVC DWV Hub x Hub P-Trap. DWV is used for non pressurized sanitary system Drain, Waste, and Vent. There are 2 types of DWV plastic: ABS (black plastic) and PVC (white plastic). The sanitary drainage and vent piping are installed to remove waste water and water-borne wastes from the plumbing fixtures and appliances. DWV also provides a circulation of air within the drainage piping. ABS (black) and PVC (white) plastic pipe and fittings have identical uses.

• Used under discharge of a plumbing fixture or drain to prevent sewer gas from escaping
• Solvent welded connections
• PVC requires a primer before cementing
• Maximum service temperature 140 degree F
• ASTM D2665 and D3312
• NSF/ANSI standard 15
• UL Listed 94V-1
• NSF U.P. certified

The NIBCO 1-1/2 in. x 1-1/4 in. ABS DWV SPG x SJ Street Trap Adapter is used in a non-pressurized sanitary system to adapt a fitting hub to a tubular trap at the floor or wall. Drain, Waste and Vent (DWV) allows removal of waste water and water-borne waste away from appliances and fixtures. ABS is lightweight, safe to handle and easy to install.

• 11/2 X 11/4 in. Inside Diameter and 1 5/8 X 1 3/8 in. Outside Diameter
• ABS plastic material
• For above-ground DWV
• ABS solvent welds to fitting hub and incorporates slip joint for tubular traps
• Do not use primer with ABS
• NSF/ANSI Standard 14
• UL Listed 94V-0
• "11/2 X 11/4 I.D. and 1 5/8 X 1 3/8 O.D."

The NIBCO 2 in. ABS DWV P-Trap is used in residential and commercial drain, waste and vent systems. The ABS DWV P-Trap features a hub x hub connection and provides a water seal so that wastewater will automatically be trapped in the arc of the configuration, thereby preventing unwanted gases from entering the household environment. Acrylonitrile-Butadiene-Styrene (ABS) is resistant to a wide variety of materials ranging from sewage to commercial household chemical formulations and can be exposed to a wide temperature span.

• 2 in. Inside Diameter and 2.125 in. Outside Diameter
• Do not use primer with ABS
• Used under a plumbing fixture or drain to prevent sewer gas from escaping
• Hub x hub connections
• Solvent-welded connections
• NSF/ANSI Standard 14
• UL Listed 94V-0

The NIBCO PVC DWV P-Trap with cleanout and plug is used in residential and commercial drain, waste and vent systems. This P-Trap features a hub x hub x cleanout with plug connection to provide a means for clearing potential clogs. The p-trap provides a water seal so that wastewater will automatically be trapped in the arc of the fitting, thereby preventing unwanted gases from entering the house.

• 11/2 in. Inside Diameter and 1.625 in. Outside Diameter
• PVC requires a primer before cementing
• Use under the discharge of a plumbing fixture or drain to help prevent sewer gas from escaping
• For use with a non-pressurized sanitary system
• Hub x hub x cleanout solvent-welded connections
• Maximum working pressure of 5 psi
• NSF/ANSI Standard 14