The NIBCO 3 in. PVC DWV 90 degree Hub x Hub Elbow is designed for use with DWV systems to help remove wastewater from plumbing fixtures. The fitting features a PVC construction that requires a primer before solvent cementing. PVC DWV is easy to install and is joined by solvent cementing or threading. PVC fittings exhibit high corrosion and chemical resistance and will not rust, scale, pit or corrode.

• PVC construction
• For use with DWV systems to help remove wastewater from plumbing fixtures
• Helps air circulate in drainage piping
• Solvent weld connections
• Apply a primer to the PVC before cementing
• Maximum working pressure of 5 psi

Complete the installation of your non-pressurized drain, waste and vent system with the NIBCO 2 in. PVC DWV 45 degree Spigot x Hub Street Elbow. This PVC fitting changes the direction of piping 45 degree .

• PVC construction
• For use with non-pressurized drain, waste and vent systems to help remove wastewater from plumbing fixtures
• Solvent welded connections
• Apply a primer to the PVC before cementing
• Maximum working pressure of 5 psi

The 3/4 in. Tectite by Apollo Push-To-Connect Elbow is the fastest, cleanest and simplest way to create a 90 joint of any combination of copper, CPVC, PE-RT and PEX pipe without the use of tools, solder, open flame or glue. Simply insert the pipe to allow the high-strength stainless steel teeth to grip the pipe securely against the specially designed O-ring. Fitting removal and reuse is just as simple using a simple demount clip (sold separately). After assembly, fittings may be rotated for simpler installation in tight spaces. All Tectite by Apollo fittings are approved for use in both potable water and hydronic heating piping systems.

• Constructed of lead free dezincification resistant (DZR) brass for superior reliability
• Push-to-connect joints require no heat, solder, solvents or tools
• Push-to-connect design allows for a simple and fast installation on any combination of copper, PEX, CPVC or PE-RT pipe
• Fittings can be rotated after being installed for ease of use in tight spaces
• Ideal for potable water and hydronic heating applications
• Listed by IAPMO and listed to ASSE 1061/NSF 64
• Meets UPC, IPC and cUPC standard requirements
• Demount clip allows for fitting removal (sold separately)
• Approved for behind-the-wall with no access and burial
• Corrosion resistant for greater longevity
• Maximum working pressure of 200 psi and maximum temperature of 250 degree F

Use the NIBCO 3 in. PVC DWV 90 degree Spigot x Hub Street Elbow with your DWV system to help remove wastewater from plumbing fixtures. The fitting features a PVC construction that requires a primer before solvent cementing. PVC DWV is easy to install and is joined by solvent cementing or threading.

• PVC construction
• For use with DWV systems to help remove wastewater from plumbing systems
• Helps air circulate in drainage piping
• Changes the direction of PVC piping 90 degree
• Solvent weld connections
• Apply a primer to the PVC before cementing
• Maximum working pressure of 5 psi

The 3/4 in. SharkBite Push-to-Connect Elbow allows you to make a 90 connection to any combination of 3/4 in. Copper, CPVC or PEX Pipe. SharkBite fittings are the easiest way to join pipe and do not require soldering, clamps, unions, glue or tools to complete the job. Just insert the pipe and the stainless steel teeth bite down and grip tight, while a specially formulated O-ring compresses to create a perfect seal. Disassembly is just as fast using the simple disconnect tool so fittings and valves can be easily changed and reused. They can even be rotated after assembly for easier installation in tight spaces. SharkBite Fittings are certified for potable water supply and hydronic heating applications. Get SharkBite and get a grip on your next plumbing project.

• Lead free DZR brass construction for durability and reliability
• Use to connect to any combination of copper, PEX, CPVC, or PE-RT pipes
• Innovative push-to-connect design makes for quick and easy installation
• Push-to-connect fittings require no solder, glue, unions, or tools
• Rated to 200F and 400 PSI
• Meets all UPC, IPC and cUPC requirements

Use the NIBCO 4 in. PVC DWV 45 degree Spigot x Hub Street Elbow to help complete the installation of your DWV system. The fitting features a PVC construction that requires a primer before solvent cementing. PVC DWV is easy to install and is joined by solvent cementing or threading.

• PVC construction
• For use with DWV systems to help remove wastewater from plumbing fixtures
• Helps air circulate in drainage piping
• Changes the direction of piping 45 degree
• Solvent weld connections
• Apply a primer to the PVC before cementing

SharkBite 3/4 in. Push-to-Connect Brass 90-Degree Elbow Fitting Pro Pack (4-Pack) is the fastest way to connect PEX, Copper, CPVC, PE-RT, or HDPE pipe in any combination. No soldering, clamps, unions, glue, or special tools required. Simply insert the pipe and the teeth bite down and grip tight, while a specially formulated O-ring compresses to create a watertight seal. Changes can easily be made by rotating the fitting after installation. Removing the fitting is just as fast using a disconnect tool so fittings and valves can be easily changed or reused. Designed with stainless steel gripping teeth for a secure connection, chlorine-resistant O-ring for a long-lasting seal and backed by a 25-year warranty.

• Push-to-Connect fittings are ideal for installation in tight spaces
• Rated to 200 degree F and 200 PSI
• Approved for underground and behind-the-wall applications with no access panels (wrapping required when burying underground)
• Can be installed on wet or dry lines and pressure tested immediately, no waiting on soldered joints to cool or solvents to dry
• Low-lead DZR corrosion resistant brass body
• Code approved, IAPMO listed, for details see Specifications
• 25-Year Warranty when used with PEX, copper, CPVC & PE-RT Pipe
• 5-Year Warranty when used with SDR-9 HDPE Pipe

Viega ProPress is the trusted copper press joining solution. Since its introduction in 1999, it has reduced overall job costs, saved time and increased reliability on jobsites across the globe. Viega is the only company with Smart Connect, a technology that helps installers easily identify an unpressed fitting, providing them with added confidence in their connections. With system-matched tools and jaws, press connections are made in seconds, making Viega ProPress suitable for virtually any type of project.

• Viega Smart Connect makes secure connection in less than 7 seconds
• Minimizes system downtime by allowing for wet connection
• Fast and easy to use
• No flame, solder, flux or heavy equipment needed
• Helps installers easily identify unpressed connections during pressure testing
• Lead free

Viega ProPress is the trusted copper press joining solution. Since its introduction in 1999, it has reduced overall job costs, saved time and increased reliability on jobsites across the globe. Viega is the only company with Smart Connect, a technology that helps installers easily identify an unpressed fitting, providing them with added confidence in their connections. With system-matched tools and jaws, press connections are made in seconds, making Viega ProPress suitable for virtually any type of project.

• Viega Smart Connect makes secure connection in less than 7 seconds
• Minimizes system downtime by allowing for wet connection
• Fast and easy to use
• No flame, solder, flux or heavy equipment needed
• Helps installers easily identify unpressed connections during pressure testing
• Lead free

The 1/2 in. SharkBite Push-to-Connect x MNPT Adapter allows you to make a 90 connection to 1/2 in. pipe using a Push-to-Connect connection on 1 end and gives you a 1/2 in. Male NPT Adapter on the opposite end. SharkBite fittings are the easiest way to join copper, CPVC or PEX pipe in any combination with no soldering, clamps, unions or glue. Just insert the pipe and the stainless steel teeth bite down and grip tight, while a specially formulated O-ring compresses to create a perfect seal. Disassembly is just as fast using the simple disconnect tool so fittings and valves can be easily changed and reused. They can even be rotated after assembly for easier installation in tight spaces. SharkBite Fittings are certified for potable water supply and hydronic heating applications. Get SharkBite and get a grip on your next plumbing project.

• Lead free DZR brass construction for durability and reliability
• Use to connect to any combination of copper, PEX, CPVC, or PE-RT pipes
• Innovative push-to-connect design makes for quick and easy installation
• Push-to-connect fittings require no solder, glue, unions, or tools
• Rated to 200 ° F and 400 PSI
• Meets all UPC, IPC and cUPC requirements

The 1/2 in. Tectite by Apollo Push-To-Connect Elbow is the fastest, cleanest and simplest way to create a 90 joint of any combination of copper, CPVC, PE-RT and PEX pipe without the use of tools, solder, open flame or glue. Simply insert the pipe to allow the high-strength stainless steel teeth to grip the pipe securely against the specially designed O-ring. Fitting removal and reuse is just as simple using a simple demount clip (sold separately). After assembly, fittings may be rotated for simpler installation in tight spaces. All Tectite by Apollo fittings are approved for use in both potable water and hydronic heating piping systems.

• Constructed of lead free dezincification resistant (DZR) brass for superior reliability
• Push-to-connect joints require no heat, solder, solvents or tools
• Push-to-connect design allows for a simple and fast installation on any combination of copper, PEX, CPVC or PE-RT pipe
• Fittings can be rotated after being installed for ease of use in tight spaces
• Ideal for potable water and hydronic heating applications
• Listed by IAPMO and listed to ASSE 1061/NSF 64
• Meets UPC, IPC and cUPC standard requirements
• Demount clip allows for fitting removal (sold separately)
• Approved for behind-the-wall with no access and burial
• Corrosion resistant for greater longevity
• Maximum working pressure of 200 psi and maximum temperature of 250 degree F

Viega ProPress is the trusted copper press joining solution. Since its introduction in 1999, it has reduced overall job costs, saved time and increased reliability on jobsites across the globe. Viega is the only company with Smart Connect, a technology that helps installers easily identify an unpressed fitting, providing them with added confidence in their connections. With system-matched tools and jaws, press connections are made in seconds, making Viega ProPress suitable for virtually any type of project.

• Viega smart connect makes secure connection in less than 7-seconds
• Minimizes system downtime by allowing for wet connection
• Fast and easy to use
• No flame, solder, flux, or heavy equipment needed
• Helps installers easily identify unpressed connections during pressure testing
• Lead free

Install the NIBCO 1-1/2 in. PVC DWV 45 degree Spigot x Hub Street Elbow to remove wastewater from plumbing fixtures and appliances. This durable plastic elbow provides air circulation within piping and is designed for use in non-pressurized sanitary system DWV applications. PVC DWV is easy to install and is joined by solvent cementing or threading.

• PVC plastic construction
• Changes the direction of piping by 45 degree
• Suitable for use in non-pressurized sanitary system DWV applications
• Provides air circulation within piping
• 1 spigot connection, 1 hub connection
• Solvent-welded connections
• Requires a primer (sold separately) before cementing
• 5 psi maximum working pressure

The NIBCO 2 in. PVC DWV 22-1/2 Hub x Spigot Street Elbow. DWV is used for non pressurized sanitary system Drain, Waste, and Vent. There are 2 types of DWV plastic: ABS (black plastic) and PVC (white plastic). The sanitary drainage and vent piping are installed to remove waste water and water-borne wastes from the plumbing fixtures and appliances. DWV also provides a circulation of air within the drainage piping. ABS (black) and PVC (white) plastic pipe and fittings have identical uses.

• Changes direction of PVC piping 22-1/2 in. from a fitting hub to PVC pipe size
• Solvent welded connections
• PVC requires a primer before cementing
• Smooth interior finish for reduced friction and material buildup
• Helps remove waste water and waterborne wastes from plumbing fixtures and appliances
• Do not test or use with compressed air or other gases
• Maximum service temperature 140 degree F

The NIBCO 3 in. PVC DWV 22-1/2 Hub x Spigot Street Elbow. DWV is used for non pressurized sanitary system Drain, Waste, and Vent. There are 2 types of DWV plastic: ABS (black plastic) and PVC (white plastic). The sanitary drainage and vent piping are installed to remove waste water and water-borne wastes from the plumbing fixtures and appliances. DWV also provides a circulation of air within the drainage piping. ABS (black) and PVC (white) plastic pipe and fittings have identical uses. The only reason for selecting 1 material over another is either the cost of the material or local plumbing code restrictions.

• Changes direction of PVC piping 22-1/2 degree
• Solvent welded connections
• PVC requires a primer before cementing
• Smooth interior finish for reduced friction and material buildup
• Helps remove waste water and waterborne wastes from plumbing fixtures and appliances
• Do not test or use with compressed air or other gases
• Maximum service temperature 140 degree F

Securely connect copper tubes with the 1 1/4 in. by 1 1/4 in. ProPress 90° elbow. Designed for use with ASTM B88 and B75 copper tubing, this fitting is used to change the fluid flow direction via the piping. Press connections make installing this elbow quick and efficient. Unlike traditional pipe fittings, there's no need for calibration, flame or heavy equipment. Instead, Viega ProPress elbows install in just 4 easy steps: cut the copper tube to length, remove any burrs and surface imperfections, measure and mark the fitting insertion depth, and use a press tool to connect the Viega ProPress elbow for a secure connection. Smart Connect technology identifies unpressed connections during pressure testing to ensure proper connections the first time and eliminate callbacks. Approved to the most codes and standards of any other press fitting system (IPC, UPC and NSF included), and with more than 400 different fitting configurations to suit virtually any type of plumbing or HVAC job, Viega ProPress elbows are the top choice of professionals around the globe.

• Install propress elbows up to 60% faster than soldering
• Press elbow quickly repairs connections, wet or dry
• Designed for use with 1 1/4 in. ASTM b88 and b75 tubing, not compatible with pex
• Compatible systems include potable water, hydronics and more
• Installs in 7 seconds or less with a press tool - no flame, solder or flux required
• Viega smart connect technology helps installers identify unpressed fittings
• Press technology eliminates the need for burn permits or fire watch
• Wet or dry connections allow quick repairs on existing systems
• Durable internal EPDM rubber seals for watertight connections
• Rated for 0-250ºF, up to 300 PSI for water applications
• Zero lead solution certified under NSF-61-380
• Reliability guaranteed by 50-year limited warranty

Securely connect tubes with the ProPress copper 45degree street elbow. Designed for use with ASTM B88 and B75 copper tubing, street elbows allow for more convenient connection options in tight situations. Press connections make installing this 5degree street elbow quick and efficient. Unlike traditional pipe fittings, there's no need for calibration, flame or heavy equipment. Instead, Viega Prepress street elbows install in just four easy steps: cut the copper tube to length, remove any burrs and surface imperfections, measure and mark the fitting insertion depth and use a press tool to connect the Viega Prepress street elbow for a secure connection. Smart Connect technology identifies unpressed connections during pressure testing to ensure proper connections the first time and eliminate callbacks. Approved to the most codes and standards of any other copper press fitting system (IPC, UPC and NSF included) and with more than 400 different fitting configurations to suit virtually any type of plumbing or HVAC job, Viega Prepress street elbows are the top choice of professionals around the globe.

• Install ProPress street elbows up to 60% faster than soldering
• Press street elbow quickly repairs connections, wet or dry
• Designed for use with ¾ in. ASTM B88 and B75 tubing, not compatible with PEX
• Compatible systems include potable water, hydronics and more
• Installs in 7-seconds or less with a press tool, no flame, solder or flux required
• Viega smart connect technology helps installers identify unpressed fittings
• Press technology eliminates the need for burn permits or fire watch
• Wet or dry connections allow quick repairs on existing systems
• Durable internal EPDM rubber seals for watertight connections
• Rated for 0°F to 250°F, up to 300 psi for water applications
• Zero lead solution certified under NSF-61-383
• Reliability guaranteed by 50-year limited warranty

The 3/8 in. SharkBite Push-to-Connect Elbow allows you to make a 90 connection to any combination of 3/8 in. Copper, cPVC or PEX Pipe. SharkBite fittings are the easiest way to join pipe and do not require soldering, clamps, unions, glue or tools to complete the job. Just insert the pipe and the stainless steel teeth bite down and grip tight, while a specially formulated O-ring compresses to create a perfect seal. Disassembly is just as fast using the simple disconnect tool so fittings and valves can be easily changed and reused. They can even be rotated after assembly for easier installation in tight spaces. SharkBite Fittings are certified for potable water supply and hydronic heating applications. Get SharkBite and get a grip on your next plumbing project.

• Lead free DZR brass construction for durability and reliability
• Use to connect to any combination of copper, PEX, CPVC, or PE-RT pipes
• Innovative push-to-connect design makes for quick and easy installation
• Push-to-connect fittings require no solder, glue, unions, or tools
• Fitting can be rotated on pipe after installation making it easier to work in tight spaces
• Designed for potable water distribution as well as hydronic heating applications
• Corrosion resistant to improve longevity
• Certified as a manufactured joint and for underground and behind-the-wall applications without access panels
• Demount clip allows user to release the fitting from the pipe for convenient installation flexibility (sold separately)
• Rated to 200 degree F and 200 psi

Install the NIBCO 3 in. PVC DWV 45 degree Spigot x Hub Street Elbow to help remove wastewater from plumbing fixtures and appliances. This durable plastic elbow provides air circulation within piping and is designed for use in non-pressurized sanitary system DWV applications. PVC DWV is easy to install and is joined by solvent cementing or threading.

• PVC plastic construction
• Changes the direction of piping by 45 degree
• Suitable for use in non-pressurized sanitary system DWV applications
• Provides air circulation within piping
• (1) 3 in. spigot connection and one 3 in. hub connection
• Solvent-welded connections
• Requires a primer (sold separately) before cementing
• 5 psi maximum working pressure

The 1/2 in. Tectite by Apollo Push-To-Connect x 1/2 in. FNPT Drop Ear Elbow is the fastest, cleanest and simplest way to create a 90 joint of any combination of copper, CPVC, PE-RT and PEX pipe without the use of tools, solder, open flame or glue. This fitting has Tectite by Apollo push-to-connect technology on one end and FNPT threads on the opposite end. Simply insert the pipe to allow the high-strength stainless steel teeth to grip the pipe securely against the specially designed O-ring. Fitting removal and reuse is just as simple using a simple demount clip (sold separately). After assembly, fittings may be rotated for simpler installation in tight spaces. All Tectite by Apollo fittings are approved for use in both potable water and hydronic heating piping systems.

• Constructed of lead free dezincification resistant (DZR) brass for superior reliability
• Push-to-connect joints require no heat, solder, solvents or tools
• Push-to-connect design allows for a simple and fast installation on any combination of copper, PEX, CPVC or PE-RT pipe
• Fittings can be rotated after being installed for ease of use in tight spaces
• Ideal for potable water and hydronic heating applications
• Listed by IAPMO and listed to ASSE 1061/NSF 64
• Meets UPC, IPC and cUPC standard requirements
• Demount clip allows for fitting removal (sold separately)
• Approved for behind-the-wall with no access and burial
• Corrosion resistant for greater longevity
• Maximum working pressure of 200 psi and maximum temperature of 250F

Nibco 6 PVC DWV 22-1/2-Degree Hub X Hub Elbow. Maximum Service Temperature 140degree f. Do not test or use with compressed air or other gases. ASTM D2665 and D3311. NSF/ANSI Standard 14. UL Listed 94V-0. NSF U.P. Certified. Mfg #K07950I

• Maximum Service Temperature 140degree f
• Do not test or use with compressed air or other gases
• ASTM D2665 and D3311
• NSF/ANSI Standard 14

The NIBCO 2 in. PVC DWV 90 degree long turn street elbow features a spigot x hub connection and long radius and is used to change the direction of flow. Please refer to NIBCO technical data sheets and catalogs for engineering and installation information. Polyvinyl chloride (PVC) is the most frequently specified of all thermoplastic materials because of its light weight, durability, and cost-effectiveness. PVC DWV is easy to install and is joined by solvent cementing or threading. PVC fittings exhibit high corrosion and chemical resistance and will not rust, scale, pit or corrode.

• Not for use with compressed air or other gases
• ASTM D2665 and D3311
• NSF/ANSI standard 14
• Maximum service temperature 140 degree F
• UL Listed 94V-0
• Size range 1-1/4 in. to 4 in.

Attach pipes to fixtures or connect dissimilar pipes with the Viega ProPress Zero-Lead Bronze Adapter. Designed for use with ASTM B88 and B75 copper tubing, this 2-ended adapter features a 3/4 in. press connection and a 3/4 in. female pipe thread connection. The press connection end makes installing this adapter fitting quick and efficient. Unlike traditional pipe fittings, there's no need for calibration, flame or heavy equipment. Instead, Viega ProPress adapters install in just 3 easy steps: cut the copper tube to length and remove any burrs or imperfections, measure and mark the fitting depth and use a press tool to connect the Viega ProPress adapter for a secure connection. Smart Connect technology identifies unpressed fittings during pressure testing to ensure proper connections the first time and eliminate callbacks. Approved to the most codes and standards of any other copper press fitting system (IPC, UPC and NSF included) and with more than 400 different fitting configurations to suit virtually any type of plumbing or HVAC job, Viega ProPress pipe fittings are the top choice of professionals around the globe.

• Easily transition copper tubing to fixtures or dissimilar pipes
• For use with ASTM B88 and B75 tubing
• ProPress fitting installs up to 60% faster compared to soldering
• Designed for use with ASTM B88 and B75 tubing, not compatible with PEX
• Approved for over 250 applications in HVAC, plumbing, fuel and more
• Installs in 7-seconds or less with a press tool no flame, solder or flux required
• Viega smart connect helps installers identify unpressed fittings
• Press technology eliminates need for burn permits or fire watch
• Wet or dry connections allow quick repairs on existing systems
• Durable internal EPDM rubber seals for watertight connections
• Rated for 0ºF to 250ºF, up to 300 psi for water applications
• Zero lead solution certified under NSF-61-372
• Reliability guaranteed by 50-year limited warranty

The NIBCO PVC DWV 90 degree vent elbow is used in residential and commercial drain, waste and vent systems. The PVC DWV 90 degree vent elbow features a hub x hub connection and the abrupt 90 degree angle is used to change the direction of flow in the venting side of the system. Please refer to NIBCO technical data sheets and catalogs for engineering and installation information.

• Changes direction in vent piping 90 degree
• Solvent welded connections
• PVC requires a primer before cementing
• Maximum service temperature 140 degree F
• Not for use with compressed air or other gases
• NSF/ANSI standard 14
• UL Listed 94V-0
• NSF U.P. certified