The PVC DWV sanitary street tee is used in residential and commercial drain, waste and vent systems. The PVC DWV sanitary street tee features a spigot x hub x hub connection and a flowing sweep to aid in the evacuation of waste and used fluids. The tee allows for a connection to be made in continuous pipeline and branch out to a different direction.

• 2 in. Inside Diameter and 2.125 in. Outside Diameter
• PVC DWV is easy to install and is joined by solvent cementing or threading
• Maximum service temperature of 140 degree F
• Do not test or use with compressed air or other gases
• ASTM D2665 and D3311
• NSF/ANSI standard 14
• UL listed 94V-0

The NIBCO PVC DWV sanitary street tee is used in residential and commercial drain, waste and vent systems. The PVC DWV sanitary street tee features a spigot x hub x hub connection and a flowing sweep to aid in the evacuation of waste and used fluids. The tee allows for a connection to be made in continuous pipeline and branch out to a different direction. Please refer to NIBCO technical data sheets and catalogs for engineering and installation information. Polyvinyl chloride (PVC) is the most frequently specified of all thermoplastic materials because of its light weight, durability and cost-effectiveness. PVC DWV is easy to install and is joined by solvent cementing or threading. PVC fittings exhibit high corrosion and chemical resistance and will not rust, scale, pit or corrode.

• 3 in. Inside Diameter and 3.125 in. Outside Diameter
• UL Listed 94V-0
• NSF U.P. certified
• Maximum service temperature of 140 degree F
• Not for use with compressed air or other gases
• ASTM D2665 and D3311
• NSF/ANSI standard 14
• Size range 1-1/2 in. to 4 in.

Viega ProPress is the trusted copper press joining solution. Since its introduction in 1999, it has reduced overall job costs, saved time and increased reliability on jobsites across the globe. Viega is the only company with Smart Connect, a technology that helps installers easily identify an unpressed fitting, providing them with added confidence in their connections. With system-matched tools and jaws, press connections are made in seconds, making Viega ProPress suitable for virtually any type of project.

• Viega Smart Connect makes secure connection in less than 7 seconds
• Minimizes system downtime by allowing for wet connection
• Fast and easy to use
• No flame, solder, flux or heavy equipment needed
• Helps installers easily identify unpressed connections during pressure testing
• Lead free

The 3/4 in. SharkBite Push-to-Connect Tee is the easiest way to join copper, cPVC or PEX pipe in any combination with no soldering, clamps, unions or glue. Just insert the pipe and the stainless steel teeth bite down and grip tight, while a specially formulated O-ring compresses to create a perfect seal. Disassembly is just as fast using the simple disconnect tool so fittings and valves can be easily changed and reused. They can even be rotated after assembly for easier installation in tight spaces. SharkBite Fittings are certified for potable water supply and hydronic heating applications. Get SharkBite and get a grip on your next plumbing project.

• Lead free DZR brass construction for durability and reliability
• Use to connect to any combination of copper, PEX, CPVC or PE-RT pipes
• Innovative push-to-connect design makes for quick and easy installation
• Push-to-connect fittings require no solder, glue, unions or tools
• Rated to 200 ° F and 400 PSI
• Meets all UPC, IPC and cUPC requirements

The 1/2 in. SharkBite Push-to-Connect Tee is the easiest way to join copper, cPVC or PEX pipe in any combination with no soldering, clamps, unions or glue. Just insert the pipe and the stainless steel teeth bite down and grip tight, while a specially formulated O-ring compresses to create a perfect seal. Disassembly is just as fast using the simple disconnect tool so fittings and valves can be easily changed and reused. They can even be rotated after assembly for easier installation in tight spaces. SharkBite Fittings are certified for potable water supply and hydronic heating applications. Get SharkBite and get a grip on your next plumbing project.

• Lead free DZR brass construction for durability and reliability
• Use to connect to any combination of copper, PEX, CPVC or PE-RT pipes
• Innovative push-to-connect design makes for quick and easy installation
• Push-to-connect fittings require no solder, glue, unions or tools
• Rated to 200 ° F and 400 PSI
• Meets all UPC, IPC and cUPC requirements

The NIBCO 2 in. PVC DWV test tee features a hub x hub x cleanout connection with a plug to test the tightness of the system by assessing potential leakage. The NIBCO PVC DWV test tee is used in residential and commercial drain, waste and vent systems. Polyvinyl chloride (PVC) is the most frequently specified of all thermoplastic materials because of its light weight, durability, and cost-effectiveness.

• PVC DWV is easy to install and is joined by solvent cementing or threading
• PVC fittings exhibit high corrosion and chemical resistance and will not rust, scale, pit or corrode
• Apply a primer to the PVC before cementing
• Helps air circulate in drainage piping
• Solvent weld connections
• Maximum working pressure of 5 psi

The NIBCO 1-1/2 in. PVC DWV test tee features a hub x hub x cleanout connection with a plug to test the tightness of the system by assessing potential leakage. The NIBCO PVC DWV test tee is used in residential and commercial drain, waste and vent systems. Polyvinyl chloride (PVC) is the most frequently specified of all thermoplastic materials because of its light weight, durability, and cost-effectiveness.

• PVC DWV is easy to install and is joined by solvent cementing or threading
• PVC fittings exhibit high corrosion and chemical resistance and will not rust, scale, pit or corrode
• Helps air circulate in drainage piping
• Maximum working pressure of 5 psi
• ASTM D2665 and D3311
• NSF/ANSI Standard 14
• UL Listed 94V-0
• NSF U.P. Certified

The NIBCO 3 in. PVC DWV All-Hub Sanitary Tee is designed for non-pressurized sanitary systems to connect a branch line into a vertical PVC drain line. The maximum working pressure is 5 psi. PVC fittings exhibit high corrosion and chemical resistance and will not rust, scale, pit or corrode.

• PVC requires a primer before cementing
• Maximum working pressure of 5 psi
• All-hub solvent-welded connections
• Smooth interior finish for reduced friction and material buildup
• Helps remove waste water and waterborne wastes from plumbing fixtures and appliances
• Do not test or use with compressed air or other gases
• Maximum service temperature 140 degree F

The NIBCO PVC sanitary tee is used in residential and commercial drain, waste and vent systems. The PVC DWV sanitary tee features a hub x hub x hub connection and a flowing sweep to aid in the evacuation of waste and used fluids. The tee allows for a connection to be made in continuous pipeline and branch out to a different direction. Polyvinyl chloride (PVC) is the most frequently specified of all thermoplastic materials because of its light weight, durability, and cost-effectiveness. PVC DWV is easy to install and is joined by solvent cementing or threading.

• PVC requires a primer before cementing
• Connects a branch line into a horizontal PVC drain line
• For use with non-pressurized sanitary systems
• All-hub solvent-welded connections
• Maximum working pressure of 5 psi
• Smooth interior finish for reduced friction and material buildup
• Helps remove wastewater and waterborne wastes from plumbing fixtures and appliances
• Do not test or use with compressed air or other gases
• Maximum service temperature 140 degree F

The 3/4 in. x 1/2 in. x 3/4 in. SharkBite Push-to-Connect Tee is the easiest way to join copper, cPVC or PEX pipe in any combination with no soldering, clamps, unions or glue. Just insert the pipe and the stainless steel teeth bite down and grip tight, while a specially formulated O-Rings compresses to create a perfect seal. Disassembly is just as fast using the simple disconnect tool so fittings and valves can be easily changed and reused. They can even be rotated after assembly for easier installation in tight spaces. Get SharkBite and get a grip on your next plumbing project.

• Lead free DZR brass construction for durability and reliability
• Use to connect to any combination of copper, PEX, CPVC or PE-RT pipes
• Innovative push-to-connect design makes for quick and easy installation
• Push-to-connect fittings require no solder, glue, unions or tools
• Rated to 200 ° F and 400 PSI
• Meets all UPC, IPC and cUPC requirements

The SharkBite Disconnect Tong is the easiest way to disconnect SharkBite fittings in hard to reach places where it can be tough to get leverage on the release collar. The Stainless Steel Disconnect Tongs are the perfect tool for anyone frequently using SharkBite Fittings. The Tool depresses the release collar using the force applied by your hand to allow the stainless-steel teeth of the fitting to release and the fitting to be removed.

• Stainless steel for durability
• Easy 1-handed operation
• Color coded handle matches corresponding color on fitting bag
• Available in 1/2 in., 3/4 in. and 1 in. sizes
• Used with SharkBite copper tube size push-to-connect fittings
• SharkBite fittings can be used to connect copper, PEX or CPVC in any combination

The SharkBite Disconnect Tong is the easiest way to disconnect SharkBite fittings in hard to reach places where it can be tough to get leverage on the release collar. The Stainless Steel Disconnect Tongs are the perfect tool for anyone frequently using SharkBite Fittings. The Tool depresses the release collar using the force applied by your hand to allow the stainless-steel teeth of the fitting to release and the fitting to be removed.

• Stainless steel for durability
• Easy 1-handed operation
• Color coded handle matches corresponding color on fitting bag
• Available in 1/2 in., 3/4 in. and 1 in. sizes
• Used with SharkBite copper tube size push-to-connect fittings
• SharkBite fittings can be used to connect copper, PEX or CPVC in any combination

The 3/4 in. x 3/4 in. x 1/2 in. SharkBite Push-to-Connect Reducing Tee allows you to make a connection from 3/4 in. Pipe and reduce down at the tee to 1/2 in. pipe. SharkBite fittings are the easiest way to join copper, cPVC or PEX pipe in any combination with no soldering, clamps, unions or glue. Just insert the pipe and the stainless steel teeth bite down and grip tight, while a specially formulated O-ring compresses to create a perfect seal. Disassembly is just as fast using the simple disconnect tool so fittings and valves can be easily changed and reused. They can even be rotated after assembly for easier installation in tight spaces. Get SharkBite and get a grip on your next plumbing project.

• Lead free DZR brass construction for durability and reliability
• Use to connect to any combination of copper, PEX, CPVC or PE-RT pipes
• Innovative push-to-connect design makes for quick and easy installation
• Push-to-connect fittings require no solder, glue, unions or tools
• Rated to 200 ° F and 400 PSI
• Meets all UPC, IPC and cUPC requirements

The NIBCO 4 in. x 4 in. x 4 in. x 4 in. PVC DWV test tee features a hub x hub x cleanout connection with a plug to test the tightness of the system by assessing potential leakage. The NIBCO PVC DWV test tee is used in residential and commercial drain, waste and vent systems. Polyvinyl chloride (PVC) is the most frequently specified of all thermoplastic materials because of its light weight, durability, and cost-effectiveness.

• PVC DWV is easy to install and is joined by solvent cementing or threading
• PVC fittings exhibit high corrosion and chemical resistance and will not rust, scale, pit or corrode
• Solvent weld connections
• Apply a primer to the PVC before cementing
• Helps air circulate in drainage piping
• Maximum working pressure of 5 psi
• Do not test or use with compressed air or other gases

Use the SharkBite 3/4 in. x 1/2 in. x 1/2 in. Brass Push-to-Connect Tee to join combinations of copper, CTS cPVC and PEX tubing (all sold separately). This fitting is constructed from durable brass and features a lead-free design. It is certified for use underground and in behind-the-wall applications.

• Lead free DZR brass construction for durability and reliability
• Use to connect to any combination of copper, PEX, CPVC or PE-RT pipes
• Innovative push-to-connect design makes for quick and easy installation
• Push-to-connect fittings require no solder, glue, unions or tools
• Rated to 200 ° F and 400 PSI
• Meets all UPC, IPC and cUPC requirements

The NIBCO 4 in. PVC DWV Hub x Hub x Hub Sanitary Tee can be used to connect a branch line into a vertical PVC drain line. The tee is designed for use with non-pressurized systems. PVC fittings exhibit high corrosion and chemical resistance and will not rust, scale, pit or corrode.

• PVC requires a primer before cementing
• Connects a branch line into a vertical PVC drain line
• Use for non-pressurized sanitary systems
• Helps remove waste water and waterborne wastes from plumbing fixtures and appliances
• Hub x hub x hub solvent-welded connections
• Smooth interior finish for reduced friction and material buildup
• Maximum service temperature 140 degree F
• Do not test or use with compressed air or other gases

The NIBCO 3 in. PVC Hub x Hub x FIPT Test Tee can be used to connect a branch line into a vertical PVC drain line. The tee features Hub x hub x FIPT solvent-welded connections. VC fittings exhibit high corrosion and chemical resistance and will not rust, scale, pit or corrode.

• PVC requires a primer before cementing
• Connects a branch line into a vertical PVC drain line
• For use with a non-pressurized sanitary system
• Hub x hub x FIPT solvent-welded connections
• Maximum working pressure of 5 psi
• Smooth interior finish for reduced friction and material buildup
• Helps remove waste water and waterborne wastes from plumbing fixtures and appliances
• Do not test or use with compressed air or other gases
• Maximum service temperature 140 degree F

The 1/2 in. x 1/2 in. x 1/2 in. Tectite by Apollo Push-To-Connect Tee is the fastest, cleanest and simplest way to join any combination of copper, CPVC, PE-RT and PEX pipe without the use of tools, solder, open flame or glue. Simply insert the pipe to allow the high-strength stainless steel teeth to grip the pipe securely against the specially designed O-ring. Fitting removal and reuse is just as simple using a simple demount clip (sold separately). After assembly, fittings may be rotated for simpler installation in tight spaces. All Tectite by Apollo fittings are approved for use in both potable water and hydronic heating piping systems.

• Constructed of lead free dezincification resistant (DZR) brass for superior reliability and strength
• Specifically designed to allow transitions between copper, CPVC and PEX to polybutylene pipe
• Push-to-connect design allows for a simple and fast installation on any combination of copper, PEX, CPVC or PE-RT pipe
• Fittings can be rotated after being installed for ease of use in tight spaces
• Ideal for potable water and hydronic heating applications
• Listed by IAPMO and listed to ASSE 1061/NSF 68
• Meets UPC, IPC and cUPC standard requirements
• Demount clip allows for fitting removal (sold separately)
• Approved for behind-the-wall with no access and burial
• Corrosion resistant for greater longevity
• Maximum working pressure of 200 psi and maximum temperature of 250 degree F

Viega ProPress is the trusted copper press joining solution. Since its introduction in 1999, it has reduced overall job costs, saved time and increased reliability on jobsites across the globe. Viega is the only company with Smart Connect, a technology that helps installers easily identify an unpressed fitting, providing them with added confidence in their connections. With system-matched tools and jaws, press connections are made in seconds, making Viega ProPress suitable for virtually any type of project.

• Viega smart connect makes secure connection in less than 7-seconds
• Minimizes system downtime by allowing for wet connection
• Fast and easy to use
• No flame, solder, flux, or heavy equipment needed
• Helps installers easily identify unpressed connections during pressure testing
• Lead free

The NIBCO 1-1/2 in. PVC DWV All-Hub Sanitary Tee connects a branch line into a vertical PVC drain line in a non-pressurized sanitary system. The tee has a maximum working pressure of 5 psi. PVC fittings exhibit high corrosion and chemical resistance and will not rust, scale, pit or corrode.

• PVC requires a primer before cementing
• Connects a branch line into a vertical PVC drain line
• For use with a non-pressurized sanitary system
• All-hub solvent-welded connections
• Maximum working pressure of 5 psi
• Smooth interior finish for reduced friction and material buildup
• Helps remove waste water and waterborne wastes from plumbing fixtures and appliances
• Do not test or use with compressed air or other gases
• Maximum service temperature 140 degree F

SharkBite 1/2 in. Push-to-Connect Brass Tee Fitting Pro Pack (4-Pack) is the fastest way to connect PEX, Copper, CPVC, PE-RT, or HDPE pipe in any combination. No soldering, clamps, unions, glue, or special tools required. Simply insert the pipe and the teeth bite down and grip tight, while a specially formulated O-ring compresses to create a watertight seal. Changes can easily be made by rotating the fitting after installation. Removing the fitting is just as fast using a disconnect tool so fittings and valves can be easily changed or reused. Designed with stainless steel gripping teeth for a secure connection, chlorine-resistant O-ring for a long-lasting seal and backed by a 25-year warranty.

• Push-to-Connect fittings are ideal for installation in tight spaces
• Rated to 200 degree F and 200 PSI
• Approved for underground and behind-the-wall applications with no access panels (wrapping required when burying underground)
• Can be installed on wet or dry lines and pressure tested immediately, no waiting on soldered joints to cool or solvents to dry
• Low-lead DZR corrosion resistant brass body
• Code approved, IAPMO listed, for details see Specifications
• 25-Year Warranty when used with PEX, copper, CPVC & PE-RT Pipe
• 5-Year Warranty when used with SDR-9 HDPE Pipe

The NIBCO Press System wrot copper tee features an inboard bead and yellow HNBR O-ring. Simply applying pressure from a pressing tool tightens the O-ring onto the tube, ensuring a clean, robust seal in seconds with no flame, solder or flux. The tee has press connections and allows for a connection to be made in a continuous pipeline and branch out to a different direction. NIBCO press fittings are the fastest, easiest way to join copper tubing systems. NIBCO PressG fittings are designed to join with seamless copper water tube in residential and commercial gas and compressed air systems. The press fittings can also be installed underground. NIBCO PressG fittings are user friendly, quick and easy to install. When properly crimped a unique "N" witness mark is clearly visible. Please refer to NIBCO technical data sheets and catalogs for engineering and installation information. NIBCO PressG fittings features a full range of precision engineered copper and copper alloy fittings, commercial valves, accessories, pressing tools, jaws and chains. In addition to its inherent qualities of beauty, durability and low maintenance, copper's reusability makes it an ideal application in sustainable projects. NIBCO PressG copper fittings are backed by a 25-year limited warranty. Because of its longstanding reputation for innovation and precision in design and manufacturing, NIBCO is the preferred brand in the industry.

• Operating pressure 200 psi max, (125 psi for natural gas applications) depending on the application
• Temperature range -40°F to 180°F
• ASTM B75 alloy C12200 copper
• IFGC international fuel gas code
• NFPA 54/Z223.1 national fuel gas code
• NFPA 58 liquified petroleum gas code
• UPC chapter 12 fuel piping
• NFPA 30 flammable and combustible liquids code
• NFPA 30A code for motor fuel dispensing facilities and repair garages
• NFPA 31 standard for the installation of oil burning equipment (supply line only)
• Third party certified to ANSI LC4/CSA 6.32
• Third party certifiefd to IAPMO/UPC LCL-4
• ICC-ES PMG 1036

The NIBCO 3 in. PVC DWV test tee features a hub x hub x cleanout connection with a plug to test the tightness of the system by assessing potential leakage. The NIBCO PVC DWV test tee is used in residential and commercial drain, waste and vent systems. Polyvinyl chloride (PVC) is the most frequently specified of all thermoplastic materials because of its light weight, durability, and cost-effectiveness.

• PVC DWV is easy to install and is joined by solvent cementing or threading
• PVC fittings exhibit high corrosion and chemical resistance and will not rust, scale, pit or corrode
• Solvent weld connections
• Helps air circulate in drainage piping
• Apply a primer to the PVC before cementing
• Maximum working pressure of 5 psi

The NIBCO Press System wrot copper tee features an inboard bead and yellow HNBR O-ring. Simply applying pressure from a pressing tool tightens the O-ring onto the tube, ensuring a clean, robust seal in seconds with no flame, solder or flux. The tee has press connections and allows for a connection to be made in a continuous pipeline and branch out to a different direction. NIBCO press fittings are the fastest, easiest way to join copper tubing systems. NIBCO PressG fittings are designed to join with seamless copper water tube in residential and commercial gas and compressed air systems. The press fittings can also be installed underground. NIBCO PressG fittings are user friendly, quick and easy to install. When properly crimped a unique "N" witness mark is clearly visible. Please refer to NIBCO technical data sheets and catalogs for engineering and installation information. NIBCO PressG fittings features a full range of precision engineered copper and copper alloy fittings, commercial valves, accessories, pressing tools, jaws and chains. In addition to its inherent qualities of beauty, durability and low maintenance, copper's reusability makes it an ideal application in sustainable projects. NIBCO PressG copper fittings are backed by a 25-year limited warranty. Because of its longstanding reputation for innovation and precision in design and manufacturing, NIBCO is the preferred brand in the industry.

• Operating pressure 200 psi maximum, (125 psi for natural gas applications) depending on the application
• Temperature range -40°F to 180°F
• ASTM B75 alloy C12200 copper
• IFGC (international fuel gas code)
• NFPA 54/Z223.1 national fuel gas code
• NFPA 58 liquified petroleum gas code
• UPC chapter 12 fuel piping
• NFPA30 flammable and combustible liquids code
• NFPA30A code for motor fuel dispensing facilities and repair garages
• NFPA 31 standard for the installation of oil burning equipment (supply line only)
• Third party certified to ANSI LC4/CSA 6.32
• Third party certified to IAPMO/UPC LCL-4
• ICC-ES PMG 1036