Complete the installation of DWV system with the NIBCO 3 in. PVC DWV 60 Hub x Hub Elbow. The PVC fitting changes the direction of piping 60 . PVC DWV is easy to install and is joined by solvent cementing or threading.

• PVC construction
• For use with DWV systems to help remove wastewater from plumbing fixtures
• Helps air circulate in drainage piping
• Changes the direction in piping 60 degree
• Solvent welded connections
• Apply a primer to the PVC before cementing

The ¾ in. barb x ½ in. barb brass elbow fitting offers contractors labor savings and installation flexibility, ideal for hospital or residential projects. Used to make sharp 90 degree turns, the fitting doesn't require soldering, heating, or specialty tools for speedy installation. The lead-free eco-brass construction delivers dependability and peace of mind for building owners. High-temp and freeze-resistant materials allows for adaptation to hot and cold water applications for PEX systems.

• High-temp and freeze-resistant materials adapt to both hot and cold water applications for PEX systems
• Crimp installation eliminates the need for soldering, heating or specialty tools
• Lead-free, eco-brass construction holds up to years of use and ensures sanitation
• 90 degree bend allows for sharp turn flow of potable water from a single indoor main line
• Pressure ratings of up to 80 PSI at 200 degree F handles the high demand of commercial usage
• NSF 61-certified
• 25-year warranty proven to last the lifetime of the building

The NIBCO 4 in. x 4 in. x 2 in. PVC DWV 90 degree elbow with low heel inlet features hub connections and is used to change the direction of flow. Polyvinyl chloride (PVC) is the most frequently specified of all thermoplastic materials because of its light weight, durability, and cost-effectiveness. PVC DWV is easy to install and is joined by solvent cementing or threading.

• NIBCO PVC DWV 90 degree elbow is used in residential and commercial drain, waste and vent systems
• PVC fittings exhibit high corrosion and chemical resistance and will not rust, scale, pit or corrode
• Maximum service temperature of 140 degree F
• ASTM D2665 and D3311
• NSF/ANSI standard 14
• UL Listed 94V-0

The NIBCO 90 degree elbow features a solder cup, male solder end, and a close rough radius. The fitting provides a means of changing the pipeline direction 90 degree . They are used when velocity is not a problem. Please refer to NIBCO technical data sheets and catalogs for engineering and installation information. In addition to its inherent qualities of beauty, durability and low maintenance, copper's reusability makes it an ideal application in sustainable projects. NIBCO copper fittings are manufactured in an ISO 9001 certified facility, and backed by a 50-year limited warranty. Because of its longstanding reputation for innovation and precision in design and manufacturing, NIBCO is the preferred brand in the industry.

• Dezincification resistant
• ASTM B75 alloy C12200
• Third-party certified to NSF/ANSI 61 and 372
• Material and workmanship per ASME B16.22
• Material, workmanship and dimensions per MSS SP-104
• NFPA 99 health care facilities gas and vacuum systems and the compressed gas association, pamphlet G4.1 (medical gas)
• Lead free

The NIBCO PVC DWV soil pipe adapter is used in residential and commercial drain, waste and vent systems. The adapter is used in a non-pressurized sanitary system which removes water-borne waste from plumbing and appliances. It adapts PVC piping to cast iron using cement and clamp or rubber sleeve.

• 3 in. Inside Diameter and 3.125 in. Outside Diameter
• Primer must be used before cementing PVC
• Use with clamp or rubber sleeve
• For above-ground DWV
• Adapts PVC to cast iron using solvent
• Smooth interior finish for reduced friction and material buildup
• Helps remove waste water and waterborne wastes from plumbing fixtures and appliances
• Do not test or use with compressed air or other gases
• Maximum service temperature 140F

This pipe fitting is easy to use for both contractors and the do-it-yourself. Ideal for use with copper, brass, iron pipe on oil. Not for underground use.

• Withstand temperatures up to 180 degree F
• Pressure up to 100 psi
• Do not over-tighten
• 2-year warranty against defect
• Lead free
• Brass

The 3/4 in. barb x 1/2 in. barb x 1/2 in. barb brass tee fitting offers contractors labor savings and installation flexibility, ideal for hospital or residential projects. The crimp insert fitting doesn't require soldering, heating or specialty tools. The lead-free eco-brass construction delivers dependability and peace of mind for building owners. Operates at a whisper noise level. High-temp and freeze-resistant materials perfect for hot and cold water applications for PEX system.

• High-temp and freeze-resistant materials adapt to both hot and cold water applications for PEX systems
• Crimp installation eliminates the need for soldering, heating or specialty tools
• Lead-free, eco-brass construction holds up to years of use and ensures sanitation
• T-shape allows for multi-directional flow of potable water from a single indoor main line
• Pressure ratings of up to 80 psi at 200 degree F handles the high demand of commercial usage
• 360 degree uniform pressure delivers more flow than required by fixture demand
• NSF 61 certified
• 25-year warranty proven to last the lifetime of the building

Streamline Copper Fittings have been the leading brand of copper fittings for over 80-years. Our product selection has grown to become the most extensive in the industry. Quality, consistency and reliability have made the Streamline brand trusted and specified all around the world.

• For use in above-ground potable water supply systems
• UL recognized to 700 psi
• Constructed of high-grade copper or bronze materials
• Made to applicable ASME standards B16.15, B16.18, B16.22, B16.24, B16.50, B1.20.1
• Wrot fittings meet NSF 61G
• Specified brand of industry professionals

ApolloPEX is cross-linked polyethylene tubing designed for use within potable water piping systems. ApolloPEX Pipe provides superior durability, corrosion resistance and flexibility for the most demanding environments. ApolloPEX is available in red, white and blue for the simple identification of cold water, hot water and main water lines. The ApolloPEX system is a comprehensive piping system comprised of brass fittings, poly alloy fittings, manifolds, valves, fasteners, tools and tubing designed for implementation in water delivery systems, simple or complex.

• Superior flexibility reduces the number of fittings required for installation which also reduces leak points within piping systems
• Durable and corrosion resistant pipe endures most installation environments
• Suitable for wet or dry installations and immediate pressure testing
• Compatible with ApolloPEX system fittings and tectite by Apollo push-to-connect fittings
• Listed to NSF 14 and CSA B137.5 for use in potable water distribution piping systems
• Center-pull coil speeds installation
• Available in coils (25 ft. - 500 ft.) and sticks (2 ft. - 20 ft.) some sizes special order only
• Pressure & Temperature: 160 psi @ 73° F, 100 psi @ 180° F
• Designed, manufactured and tested to meet or exceed the requirements of ASTM F-876/877/2023 and CSA B137.5
• The tubing may be installed in concrete, gypsum based lightweight concrete, sand, asphalt, in or under wood flooring, or behind wallboard or plaster
• Type B cross-linked polyethylene

The NIBCO Press System wrot copper tee features an inboard bead and yellow HNBR O-ring. Simply applying pressure from a pressing tool tightens the O-ring onto the tube, ensuring a clean, robust seal in seconds with no flame, solder or flux. The tee has press connections and allows for a connection to be made in a continuous pipeline and branch out to a different direction. NIBCO press fittings are the fastest, easiest way to join copper tubing systems. NIBCO PressG fittings are designed to join with seamless copper water tube in residential and commercial gas and compressed air systems. The press fittings can also be installed underground. NIBCO PressG fittings are user friendly, quick and easy to install. When properly crimped a unique "N" witness mark is clearly visible. Please refer to NIBCO technical data sheets and catalogs for engineering and installation information. NIBCO PressG fittings features a full range of precision engineered copper and copper alloy fittings, commercial valves, accessories, pressing tools, jaws and chains. In addition to its inherent qualities of beauty, durability and low maintenance, copper's reusability makes it an ideal application in sustainable projects. NIBCO PressG copper fittings are backed by a 25-year limited warranty. Because of its longstanding reputation for innovation and precision in design and manufacturing, NIBCO is the preferred brand in the industry.

• Operating pressure 200 psi max, (125 psi for natural gas applications) depending on the application
• Temperature range -40°F to 180°F
• ASTM B75 alloy C12200 copper
• IFGC international fuel gas code
• NFPA 54/Z223.1 national fuel gas code
• NFPA 58 liquified petroleum gas code
• UPC chapter 12 fuel piping
• NFPA 30 flammable and combustible liquids code
• NFPA 30A code for motor fuel dispensing facilities and repair garages
• NFPA 31 standard for the installation of oil burning equipment (supply line only)
• Third party certified to ANSI LC4/CSA 6.32
• Third party certifiefd to IAPMO/UPC LCL-4
• ICC-ES PMG 1036

The NIBCO Press System wrot copper tee features an inboard bead and yellow HNBR O-ring. Simply applying pressure from a pressing tool tightens the O-ring onto the tube, ensuring a clean, robust seal in seconds with no flame, solder or flux. The tee has press connections and allows for a connection to be made in a continuous pipeline and branch out to a different direction. NIBCO press fittings are the fastest, easiest way to join copper tubing systems. NIBCO PressG fittings are designed to join with seamless copper water tube in residential and commercial gas and compressed air systems. The press fittings can also be installed underground. NIBCO PressG fittings are user friendly, quick and easy to install. When properly crimped a unique "N" witness mark is clearly visible. Please refer to NIBCO technical data sheets and catalogs for engineering and installation information. NIBCO PressG fittings features a full range of precision engineered copper and copper alloy fittings, commercial valves, accessories, pressing tools, jaws and chains. In addition to its inherent qualities of beauty, durability and low maintenance, copper's reusability makes it an ideal application in sustainable projects. NIBCO PressG copper fittings are backed by a 25-year limited warranty. Because of its longstanding reputation for innovation and precision in design and manufacturing, NIBCO is the preferred brand in the industry.

• Operating pressure 200 psi max, (125 psi for natural gas applications) depending on the application
• Temperature range -40°F to 180°F
• ASTM B75 alloy C12200 copper
• IFGC international fuel gas code
• NFPA 54/Z223.1 national fuel gas code
• NFPA 58 liquified petroleum gas code
• UPC chapter 12 fuel piping
• NFPA 30 flammable and combustible liquids code
• NFPA 30A code for motor fuel dispensing facilities and repair garages
• NFPA 31 standard for the installation of oil burning equipment (supply line only)
• Third party certified to ANSI LC4/CSA 6.32
• Third party certifiefd to IAPMO/UPC LCL-4
• ICC-ES PMG 1036

This item is used in hot and cold water plumbing applications. It is made of Stainless steel (type 304). The mechanical fastener is used to secure Zurn Pex tubing to Zurn Qick/Sert1 fittings.

• Utilizes one tool
• Used in hot water plumbing applications
• Used in cold water plumbing applications
• Stainless steel
• Crimp ring 3/8 in.
• Easy to install

The fitting reducer features a male solder end and solder cup. The fitting provides a means for reducing the size of a line. NIBCO copper fittings are manufactured in an ISO 9001 certified facility, and backed by a 50-year limited warranty.

• Lead-free wrot copper solder pressure fitting reducer is used in residential and commercial systems such as potable water, air conditioning and refrigeration
• Dezincification resistant
• Options also include cleaned and bagged for oxygen service (medical gas)
• Lead-free wrot copper solder pressure fitting reducer is durable and low maintenance
• MSS SP-104
• ASME B16.22
• Third-party certified to NSF/ANSI 61 and 372

Southland offers both black and galvanized welded steel nipples in 15 diameters from 1/8 in. to 6 in. and with different lengths ranging from Close up to 12 in. Available individually or in pre-packaged assortments, we also offer a full selection of ready cut welded steel pipes in the same diameters lengths ranging from 18 up to 72. All galvanized are zinc coated for use in water applications complying with the NSF 372 lead-free requirements.

• ANSI/ASME B.16.3, B-16.14, B16-39 and Threads: ANSI B1.20.1
• Steel nipples/Pre-Cut Pipe meet material: ANSI/ASTM A.733.A5320; Threads: ANSI B1.20.1
• Galvanized Steel Nipple can be used in residential drainage and potable water applications. The nipple can be used to repair pipe or make an extension from a fitting or existing pipe.
• Nipple complies with NSF 372 lead free
• Long useful life
• Easy to install, ready to use

This 3/8 in. compression connector features a solid brass construction. It is chrome plated finish. It can be used in both indoors and outdoors.

• Made of brass
• Lead free
• Fittings
• Chrome plated
• Individually packed
• Solder

This brass compression coupling features a solid brass construction. It use with copper tubing. All of its features comply with state lead-free requirements.

• Made of cast brass
• 5 in. in length
• Lead free
• Easy to connect
• Fittings
• Join by threading

This pipe fitting is easy to use for both contractors and the do-it-yourself. Ideal for use with copper, brass, iron pipe on oil. Not for underground use.

• Withstand temperatures up to 212 degree F
• Pressure up to 400 psi
• 2-year warranty against defect
• Do not over-tighten
• Red brass
• Nipple

This pipe fitting is easy to use for both contractors and the do-it-yourself. Ideal for use with copper, brass, iron pipe on oil. Not for underground use.

• Withstand temperatures up to 212 degree F
• Pressure up to 400 psi
• 2-year warranty against defect
• Do not over-tighten
• Red brass
• Nipple

The NIBCO 6 in. x 4 in. PVC DWV Spigot x Hub Flush Bushing can be inserted into a PVC sitting hub to reduce the hub to a smaller pipe size. The bushing is designed for use with drain, waste and vent piping systems. PVC fittings exhibit high corrosion and chemical resistance and will not rust, scale, pit or corrode.

• PVC requires the use of a primer before cementing
• Used with sanitary drainage and vent piping
• Inserts into a PVC sitting hub to reduce the hub to a smaller pipe size
• Spigot x hub connections
• Solvent-welded connections
• Smooth interior finish for reduced friction and material buildup
• Helps remove waste water and waterborne wastes from plumbing fixtures and appliances
• Do not test or use with compressed air or other gases
• Maximum service temperature 140 degree F

The NIBCO PVC DWV 45-degree wye is a used in residential and commercial drain, waste and vent systems. The PVC DWV 45-degree wye features a hub x hub x hub connection and allows for a connection to be made in continuous pipeline and branch out to a different direction. Please refer to NIBCO technical data sheets and catalogs for engineering and installation information. Polyvinyl chloride (PVC) is the most frequently specified of all thermoplastic materials because of its light weight, durability, and cost-effectiveness. PVC DWV is easy to install and is joined by solvent cementing or threading. PVC fittings exhibit high corrosion and chemical resistance and will not rust, scale, pit or corrode. NIBCO plastic fittings are backed by a 5-year limited warranty. Because of its longstanding reputation for innovation and precision in design and manufacturing, NIBCO is the preferred brand in the industry.

• Maximum service temperature of 140 degree F
• Do not test or use with compressed air or other gases
• ASTM D2665 and D3311
• NSF/ANSI standard 14
• ASTM D2665 and D3311
• NSF/ANSI standard 14
• UL Listed 94V-0

This pipe fitting is easy to use for both contractors and the do-it-yourself. Ideal for use with copper, brass, iron pipe on oil, natural gas, water and air lines. Tapered pipe threads are manufactured to exacting quality and standards.

• Withstand temperatures up to 212 degree F
• Pressure up to 200 psi
• Brass reducing bushing only
• 5-year warranty against defect
• Forged brass
• Bushing

The NIBCO Press System wrot copper tee features an inboard bead and yellow HNBR O-ring. Simply applying pressure from a pressing tool tightens the O-ring onto the tube, ensuring a clean, robust seal in seconds with no flame, solder or flux. The tee has press connections and allows for a connection to be made in a continuous pipeline and branch out to a different direction. NIBCO press fittings are the fastest, easiest way to join copper tubing systems. NIBCO PressG fittings are designed to join with seamless copper water tube in residential and commercial gas and compressed air systems. The press fittings can also be installed underground. NIBCO PressG fittings are user friendly, quick and easy to install. When properly crimped a unique "N" witness mark is clearly visible. Please refer to NIBCO technical data sheets and catalogs for engineering and installation information. NIBCO PressG fittings features a full range of precision engineered copper and copper alloy fittings, commercial valves, accessories, pressing tools, jaws and chains. In addition to its inherent qualities of beauty, durability and low maintenance, copper's reusability makes it an ideal application in sustainable projects. NIBCO PressG copper fittings are backed by a 25-year limited warranty. Because of its longstanding reputation for innovation and precision in design and manufacturing, NIBCO is the preferred brand in the industry.

• Operating pressure 200 psi maximum, (125 psi for natural gas applications) depending on the application
• Temperature range -40°F to 180°F
• ASTM B75 alloy C12200 copper
• IFGC (international fuel gas code)
• NFPA 54/Z223.1 national fuel gas code
• NFPA 58 liquified petroleum gas code
• UPC chapter 12 fuel piping
• NFPA30 flammable and combustible liquids code
• NFPA30A code for motor fuel dispensing facilities and repair garages
• NFPA 31 standard for the installation of oil burning equipment (supply line only)
• Third party certified to ANSI LC4/CSA 6.32
• Third party certified to IAPMO/UPC LCL-4
• ICC-ES PMG 1036

The ApolloPex 4-Port Open Manifold are ideal for the safe distribution of hot or cold water. They are suitable for new construction or remodel applications and are unaffected by aggressive water issues. ApolloPex manifolds can be secured into place using copper crimps, stainless steel pinch clamps or stainless steel crimp sleeves (all sold separately). The ApolloPex system is a comprehensive piping system comprised of brass fittings, poly alloy fittings, manifolds, valves, fasteners, tools and tubing designed for implementation in water delivery systems, simple or complex.

• Durable poly-alloy material
• 4 PEX-B barb port outlets
• Compatible with PEX-B pipe (sold separately)
• 3/4 in. inlet with 1/2 in. outlets
• Fewer joints means fewer fitting and connections required and reduces potential leak points
• ASTM F877/F1807 specification
• NSF 61 certified

This braided vinyl tubing is made from polyester braided reinforced polyvinyl chloride and has the strength to withstand 4-times the working pressure of single wall PVC. The smooth, dense bore of the tubing maximizes the flow rate and reduces sediment buildup. It has excellent resistance to acids, alkalis and many solvents and handles a wide variety of chemicals, gases and liquids.

• Easy to use
• Made with polyester braided reinforced PVC non-toxic material
• Excellent resistance to acids, alkalis and many solvents
• Handles a wide variety of chemicals, gases and liquids
• Provides superior performance under severe operating conditions
• Excellent for hydraulic, pneumatic and vacuum lines

Apollo Expansion PEX is cross-linked polyethylene tubing designed for use within potable water piping systems. Produced using a Peroxide method, Apollo Expansion PEX is PEX-A pipe. Having been in use for over 50 years PEX-A pipe has the highest rate of cross-linking of any PEX pipe. Apollo Expansion PEX is the most flexible PEX pipe available. Apollo Expansion PEX Pipe provides superior durability, corrosion resistance and flexibility for the most demanding environments. Apollo Expansion PEX is available in red, white and blue for the simple identification of cold water, hot water and main water lines. The Apollo Expansion PEX system is a comprehensive cold expansion piping system comprised of brass fittings, poly alloy fittings, manifolds, valves, fasteners, tools and tubing designed for implementation in water delivery systems, simple or complex.

• Pipe is red in color for easy identification of hot water distribution lines within a piping system
• Apollo expansion PEX pipe is compatible with both expansion and crimp, clamp or sleeve methods of joining
• Compatible with Tectite by Apollo push-to-connect fittings
• Meets or exceeds the following standards: ASTM F876, F877, F1807, F1960, F2023, F2080 and F2159
• Heat-reparable if kinked during installation thus further eliminating additional repair connections
• Shape memory inherent in PEX-a tubing results in the shrinking of expanded pipe to normal size, creating strong, durable and reliable ASTM F1960 fitting connections
• Maximum cross-linking increases flexibility and resistance to cracking
• Available in a variety of lengths including 100 ft. and 300 ft. coils
• Compatible with Uponor and Wirsbo PEX piping systems
• Apollo expansion PEX (PEX-A) has less coil memory than traditional PEX pipe and resists the urge to remain coiled
• Maximum Pressures & Temperatures: 160 psi @ 73.4° F, 100 psi @ 180° F, 80 psi @ 200° F
• The pipe may be installed in concrete, gypsum-based lightweight concrete, sand, asphalt, in or under wood flooring, or behind wallboard or plaster
• cNSFus-pw
• CSA B137.18

The reducing coupling features solder cups. The fitting provides a means of connecting larger size tube to smaller size tube. NIBCO copper fittings are manufactured in an ISO 9001 certified facility, and backed by a 50-year limited warranty.

• Lead-free wrot copper solder reducing coupling is used in residential and commercial systems such as potable water, air conditioning and refrigeration
• Dezincification resistant
• Options also include cleaned and bagged for oxygen service (medical gas)
• Lead-free wrot copper solder reducing coupling is durable and low maintenance
• MSS SP-104
• ASME B16.22
• Third-party certified to NSF/ANSI 61 and 372

The NIBCO 3 in. ABS Double Sanitary Tee can be used to bring 2 ABS DWV branch lines into 1 vertical drain line. ABS is lightweight, safe to handle and easy to install. ABS DWV is joined by solvent cementing or threading and can easily be connected to steel, copper, or cast iron through the use of transition fittings. Acrylonitrile-Butadiene-Styrene (ABS) is resistant to a wide variety of materials ranging from sewage to commercial household chemical formulations and can be exposed to a wide temperature span.

• 3 in. Inside Diameter and 3.125 in. Outside Diameter
• Do not use primer with ABS
• Used to bring 2 ABS DWV branch lines into a vertical drain line
• Hub x hub connections
• Solvent-welded connections
• NSF/ANSI Standard 14
• CSA B181.1
• "3 I.D. and 3.125 O.D."

Choosing a lead-free brass compression fitting ensures safety and peace of mind for years to come. It is not recommended for use with steel tubing. Compression fitting is easy to use for both contractors and the do-it-yourself.

• Withstand temperatures 212 degree F
• Pressure up to 125 psi
• 2-year warranty against defect
• Comp
• Forged brass
• Cap

CPVC/Stainless Steel Adaptor Female x Socket. This product complies with all Federal Low Lead laws. Item molded in the USA.

• Product is lead free rated for use in hot- and cold-water distribution systems
• Do not use with compressed air or gasses
• Stainless steel prevents dezincification
• Molded in the USA contractor-grade PlatinumXCELL resin
• NSF low lead rated

This pipe fitting is easy to use for both contractors and the do-it-yourself. Ideal for use with copper, brass, iron pipe on oil. Not for underground use.

• Withstand temperatures up to 180 degree F
• Pressure up to 100 psi
• Do not over-tighten
• 2-year warranty against defect
• Lead free
• Brass

Can be used which makes them an economical choice. For use with copper, brass, aluminum and welded steel hydraulic tubing that can be flared. Not for underground use.

• Withstand temperatures up to 212 degree F
• Pressure up to 250 psi
• Brass
• 2-year warranty against defect
• Lead free
• Adapter

The NIBCO 2 in. PVC DWV 60 degree Hub x Hub Elbow features a PVC construction that helps air circulate in piping used with DWV systems. The fitting bends at a 60 degree angle to change the direction of piping. PVC DWV is easy to install and is joined by solvent cementing or threading.

• PVC construction
• For use with DWV systems to help remove wastewater from plumbing fixtures
• Helps air circulate in drainage piping
• Changes the direction of piping 60 degree
• Solvent weld connections
• Apply a primer to the PVC before cementing

Fix your copper pipe with the Mueller 1 in. C x C Copper Union. This copper fitting is constructed of Wrot Copper for long lasting durability and strength. The design meets all applicable plumbing standards.

• Three piece fitting that joins two sections of pipe, but allows them to be disconnected without cutting the pipe
• For use in pressure applications
• Wrot copper construction
• Easy to join and install
• Made to applicable ASME standards B16.15, B16.18, B16.22, B16.24, B16.50, B1.20.1

Female Adapter

• Slip x Fip
• This product is used in wide range of applications
• Easily Fits and this is easy to install
• Do not use LASCO fittings for compressed air or gases
• Do not test PVC piping systems with compressed air or gases
• Do not use fittings with liquids not recommended by LASCO
• ASTM D-2464 - Threaded Poly (Vinyl Chloride) (PVC) Plastic Pipe Fittings, Schedule 80
• ASTM D-2467 - Socket Type Poly (Vinyl Chloride) (PVC) Plastic Pipe Fittings, Schedule 80