Pipe, Tubing & Fittings
The NIBCO PVC DWV male adapter is used in residential and commercial drain, waste and vent systems. The PVC DWV male adapter features a hub x male NPT thread connection and provides a means for adapting a solvent weld connection to a threaded connection. Polyvinyl chloride (PVC) is the most frequently specified of all thermoplastic materials because of its light weight, durability, and cost-effectiveness.
- PVC requires a primer before cementing
- For above-ground DWV
- Adapts PVC pipe to standard female pipe threads using solvent
- Smooth interior finish for reduced friction and material buildup
- Helps remove waste water and waterborne wastes from plumbing fixtures and appliances
- Do not test or use with compressed air or other gases
- Maximum service temperature 140 degree F
ApolloPEX is cross-linked polyethylene tubing designed for use within potable water piping systems. ApolloPEX Pipe provides superior durability, corrosion resistance and flexibility for the most demanding environments. ApolloPEX is available in red, white and blue for the simple identification of cold water, hot water and main water lines. The ApolloPEX system is a comprehensive piping system comprised of brass fittings, poly alloy fittings, manifolds, valves, fasteners, tools and tubing designed for implementation in water delivery systems, simple or complex.
- Superior flexibility reduces the number of fittings required for installation which also reduces leak points within piping systems
- Durable and corrosion resistant pipe endures most installation environments
- Suitable for wet or dry installations and immediate pressure testing
- Compatible with ApolloPEX system fittings and tectite by Apollo push-to-connect fittings
- Listed to NSF 14 and CSA B137.5 for use in potable water distribution piping systems
- Center-pull coil speeds installation
- Available in coils (25 ft. - 500 ft.) and sticks (2 ft. - 20 ft.) some sizes special order only
- Pressure & Temperature: 160 psi @ 73° F, 100 psi @ 180° F
- Designed, manufactured and tested to meet or exceed the requirements of ASTM F-876/877/2023 and CSA B137.5
- The tubing may be installed in concrete, gypsum based lightweight concrete, sand, asphalt, in or under wood flooring, or behind wallboard or plaster
- Type B cross-linked polyethylene
The Apollo Expansion PEX 1/2 in. x 3/4 in. Brass PEX-A Reducing Barb Coupling is simple to install. Apollo Expansion PEX barb fittings are a key component to one of the most economical potable water piping systems. Also capable of integration into hydronic heating systems, Apollo Expansion PEX couplings must be secured into place Apollo Expansion PEX sleeves or comparable expansion-type sleeve or ring (all sold separately). The Apollo Expansion PEX system is a comprehensive piping system comprised of lead free brass fittings, poly alloy fittings, manifolds, valves, fasteners, tools and tubing designed for implementation in water delivery systems, simple or complex. A cold-expansion tool (sold separately) is required for installation.
- Compatible with Uponor and Wirsbo PEX piping systems
- Larger internal diameter of Apollo expansion PEX fittings results in a 25% greater flow rate within the system
- Constructed of lead free DeZincification Resistant (DZR) brass for superior reliability and strength
- Cold-expansion tool (sold separately) is required for installation
- Meets or exceeds ASTM F1960 standard
- Meets UPC, IPC, and cUPC standard requirements
- Must secured in place using Apollo Expansion PEX sleeves or other PEX-A expansion sleeves/rings
- NSF Listed
- Barb x barb connection for PEX-A plumbing systems
- Go/no-go gauges are never required
- To ensure secure connections every time, fittings cannot be dry fit
- Rated to 200 degree F and 200 psi
- Item is not compatible with PEXb pipe, crimp-style (ASTM 1807) or pinch clamp (ASTM F2098) piping systems
The 1/2 in. SharkBite Push-Fit x FNPT Adapter allows you to make a connection to 1/2 in. pipe using a push-fit connection and then gives you a 1/2 in. Female NPT Adapter on the opposite end. SharkBite fittings are the easiest way to join copper, cPVC or PEX pipe in any combination with no soldering, clamps, unions or glue. Just insert the pipe and the stainless steel teeth bite down and grip tight, while a specially formulated O-ring compresses to create a perfect seal. Disassembly is just as fast using the simple disconnect tool so fittings and valves can be easily changed and reused. They can even be rotated after assembly for easier installation in tight spaces. SharkBite Fittings are certified for potable water supply and hydronic heating applications. Get SharkBite and get a grip on your next plumbing project.
- Lead free DZR brass construction for durability and reliability
- Use to connect to any combination of copper, PEX, CPVC, or PE-RT pipes
- Innovative push-to-connect design makes for quick and easy installation
- Push-to-connect fittings require no solder, glue, unions, or tools
- Rated to 200 degree F and 200 psi
- Meets all UPC, IPC and cUPC requirements
The 3/4 in. male sweat x 3/4 in. barb copper adapter fitting offers contractors labor savings and flexibility, ideal for commercial or residential projects. Designed to fit inside a wrought copper fitting and with PEX systems, the innovative construction eliminates the need for soldering, heating, or specialty tools. The lead-free cooper material delivers dependability for building owners. High-temp and freeze-resistant materials allows for adaptation to hot and cold water applications.
- High-temp and freeze-resistant materials adapt to both hot and cold water applications for PEX systems
- Crimp installation eliminates the need for soldering, heating or specialty tools
- Cooper construction holds up to years of use and ensures sanitation
- Pressure ratings of up to 80 psi at 200 degree F handles the high demand of commercial usage
- NSF 61-certified
- 25-year warranty proven to last the lifetime of the building
Streamline Copper Fittings have been the leading brand of copper fittings for over 80-years. Our product selection has grown to become the most extensive in the industry. Quality, consistency and reliability have made the Streamline brand trusted and specified all around the world.
- For use in above-ground potable water supply systems
- UL recognized to 700 psi
- Constructed of high-grade copper or bronze materials
- Made to applicable ASME standards B16.15, B16.18, B16.22, B16.24, B16.50, B1.20.1
- Wrot fittings meet NSF 61G
- Specified brand of industry professionals
This pipe fitting is easy to use for both contractors and the do-it-yourself. Ideal for use with copper, brass, iron pipe on oil. Not for underground use.
- Withstand temperatures up to 212 degree F
- Pressure up to 400 psi
- 2-year warranty against defect
- Do not over-tighten
- Red brass
- Nipple
This pipe fitting is easy to use for both contractors and the do-it-yourself. Ideal for use with copper, brass, iron pipe on oil. Not for underground use.
- Withstand temperatures up to 212 degree F
- Pressure up to 400 psi
- 2-year warranty against defect
- Do not over-tighten
- Red brass
- Nipple
This 3/8 in. compression connector features a solid brass construction. It is chrome plated finish. It can be used in both indoors and outdoors.
- Made of brass
- Lead free
- Fittings
- Chrome plated
- Individually packed
- Solder
The ¾ in. barb x ½ in. barb brass elbow fitting offers contractors labor savings and installation flexibility, ideal for hospital or residential projects. Used to make sharp 90 degree turns, the fitting doesn't require soldering, heating, or specialty tools for speedy installation. The lead-free eco-brass construction delivers dependability and peace of mind for building owners. High-temp and freeze-resistant materials allows for adaptation to hot and cold water applications for PEX systems.
- High-temp and freeze-resistant materials adapt to both hot and cold water applications for PEX systems
- Crimp installation eliminates the need for soldering, heating or specialty tools
- Lead-free, eco-brass construction holds up to years of use and ensures sanitation
- 90 degree bend allows for sharp turn flow of potable water from a single indoor main line
- Pressure ratings of up to 80 PSI at 200 degree F handles the high demand of commercial usage
- NSF 61-certified
- 25-year warranty proven to last the lifetime of the building
Southland offers both black and galvanized welded steel nipples in 15 diameters from 1/8 in. to 6 in. and with different lengths ranging from Close up to 12 in. Available individually or in pre-packaged assortments, we also offer a full selection of ready cut welded steel pipes in the same diameters lengths ranging from 18 up to 72. All galvanized are zinc coated for use in water applications complying with the NSF 372 lead-free requirements.
- ANSI/ASME B.16.3, B-16.14, B16-39 and Threads: ANSI B1.20.1
- Steel nipples/Pre-Cut Pipe meet material: ANSI/ASTM A.733.A5320; Threads: ANSI B1.20.1
- Galvanized Steel Nipple can be used in residential drainage and potable water applications. The nipple can be used to repair pipe or make an extension from a fitting or existing pipe.
- Nipple complies with NSF 372 lead free
- Long useful life
- Easy to install, ready to use
The Apollo ExpansionPEX 1/2 in. Brass PEX-A Barb x 3/4 in. Reducing Female Sweat Adapter is simple to install is designed as an economical solution for the transition from copper tubing to PEX-A tubing. Apollo ExpansionPEX barb fittings are a key component to one of the most economical potable water piping systems. Also capable of integration into hydronic heating systems, Apollo ExpansionPEX couplings must be secured into place Apollo ExpansionPEX sleeves or comparable expansion-type sleeve or ring (all sold separately). The Apollo ExpansionPEX system is a comprehensive piping system comprised of lead free brass fittings, poly alloy fittings, manifolds, valves, fasteners, tools and tubing designed for implementation in water delivery systems, simple or complex. A cold-expansion tool (sold separately) is required for installation.
- Individually bagged
- Larger internal diameter of Apollo ExpansionPEX fittings results in a 25% greater flow rate within the system
- Constructed of lead free dezincification resistant (DZR) brass for superior reliability and strength
- Cold-expansion tool (sold separately) is required for installation
- Meets or exceeds ASTM F1960 standard
- Meets UPC, IPC and cUPC standard
- Must secured in place using Apollo ExpansionPEX sleeves or other PEX-A expansion sleeves/rings
- NSF listed
- Barb x solder connection for PEX-A plumbing systems
- Go/no-go gauges are never required
- To ensure secure connections every time, fittings cannot be dry fit
- Rated to 200 degree F and 200 psi
- Item is not compatible with PEXb pipe, crimp-style (ASTM 1807) or pinch clamp (ASTM F2098) piping systems
Can be used which makes them an economical choice. For use with copper, brass, aluminum and welded steel hydraulic tubing that can be flared. Not for underground use.
- Withstand temperatures up to 212 degree F
- Pressure up to 150 psi
- Brass
- 2-year warranty against defect
- Leaded
- Adapter
Fix your copper pipe with the Mueller 3/4 in. Copper Cap. This copper fitting is constructed of Wrot Copper for long lasting durability and strength. The design meets all applicable plumbing standards.
- For use in above-ground potable water supply systems
- UL recognized to 700 psi
- Constructed of high-grade copper or bronze materials
- Made to applicable ASME standards B16.15, B16.18, B16.22, B16.24, B16.50, B1.20.1
- Wrot fittings meet NSF 61G
- Specified brand of industry professionals
The NIBCO 2 in. PVC DWV 60 degree Hub x Hub Elbow features a PVC construction that helps air circulate in piping used with DWV systems. The fitting bends at a 60 degree angle to change the direction of piping. PVC DWV is easy to install and is joined by solvent cementing or threading.
- PVC construction
- For use with DWV systems to help remove wastewater from plumbing fixtures
- Helps air circulate in drainage piping
- Changes the direction of piping 60 degree
- Solvent weld connections
- Apply a primer to the PVC before cementing
The 3/4 in. barb x 1/2 in. barb QickSert elbow offers contractors labor savings and flexibility, making it ideal for commercial or residential projects. The polymer construction provides protection against corrosion, chemicals and chlorine. Immediately full strength upon installation, the fitting delivers dependability and peace of mind for building owners. Extreme temperature and pressure resistant materials allows the fitting to adapt aggressive water environments with PEX systems.
- High-temp and freeze-resistant materials adapt to both hot and cold-water applications for PEX systems
- Durable polymer material provides corrosion and chemical/chlorine resistance, ideal for aggressive water environments
- High strength design allows for longest UV exposure of up to 6-months without degradation and over 700 lbs. of pressure before failure
- Versatile design works with existing PEX systems and crimp fittings
- Pressure ratings of up to 80 psi at 200 degree F handles the high demand of commercial usage
- NSF 61 and ANSI certified
- 25-year warranty proven to last the lifetime of the building
CPVC/Stainless Steel Adaptor Female x Socket. This product complies with all Federal Low Lead laws. Item molded in the USA.
- Product is lead free rated for use in hot- and cold-water distribution systems
- Do not use with compressed air or gasses
- Stainless steel prevents dezincification
- Molded in the USA contractor-grade PlatinumXCELL resin
- NSF low lead rated
This 45 degree elbow is made of durable, corrosion-resistant CPVC material. Used to change direction in piping. Solvent weld design makes it easy for DIY plumbing projects and installation.
- Meets ASTM D2846
- Do not use with compressed air or other gasses
- Solvent weld joints
- Slip x slip connection
- Rated for 400 psi at 73 degree and 100 psi at 180 degree
- CPVC systems are accepted by all major model building codes
Can be used which makes them an economical choice. For use with copper, brass, aluminum and welded steel hydraulic tubing that can be flared. Not for underground use.
- Withstand temperatures up to 212 degree F
- Pressure up to 150 psi
- Brass
- 2-year warranty against defect
- Leaded
- Adapter
This PVC pipe is used for drain, waste, and vent applications. Dual rated for pressure and drainage. Solvent weld design makes it easy for DIY plumbing projects and installation.
- Meets ASTM D1785
- Iron pipe size
- NSF listed
- Compatible with all Genova Sch 40 DWV fittings
- Plumb line feature to use as a reference mark relative to the degree marks on Genova fittings
- Plain end
The 3/4 in. x 20 ft. blue straight length piping provides impact resistance and eases installation for contractors, making it ideal for residential and commercial projects. Free of BPA, lead and toxins the piping offers high purity and operates at a quiet noise level. The 25-year warranty is proven to last the lifetime of the building. The high-temp and freeze-resistant material allows the piping to adapt to hot and cold water applications.
- High-temp and freeze-resistant materials adapt to both hot and cold water applications for PEX systems
- Corrosion resistance eliminates the possibility of mineral buildup, extending the life of the system
- Pressure rating of up to 80 psi at 200 degree F handles the high demand of commercial usage
- BPA, lead-free construction holds up for years of use
- Non-toxic materials ensure the highest purity and safety NSF 14 and 61 certified
- ASTM F876 / F877 certified 25-year warranty
Streamline Copper Fittings have been the leading brand of copper fittings for over 80-years. Our product selection has grown to become the most extensive in the industry. Quality, consistency and reliability have made the Streamline brand trusted and specified all around the world.
- For use in above-ground potable water supply systems
- UL recognized to 700 psi
- Constructed of high-grade copper or bronze materials
- Made to applicable ASME standards B16.15, B16.18, B16.22, B16.24, B16.50, B1.20.1
- Wrot fittings meet NSF 61G
- Specified brand of industry professionals
The 3/4 in. by 20 ft. red straight length piping provides impact resistance and eases installation for contractors, making it ideal for residential and commercial projects. Free of BPA, lead and toxins the piping offers high purity and operates at a quiet noise level. The 25-year warranty is proven to last the lifetime of the building. The high-temp and freeze-resistant material allows the piping to adapt to hot and cold water applications.
- High-temp and freeze-resistant materials adapt to both hot and cold water applications for PEX systems
- Corrosion resistance eliminates the possibility of mineral buildup, extending the life of the system
- Pressure rating of up to 80 psi at 200 degree F handles the high demand of commercial usage
- BPA, lead-free construction holds up for years of use
- Non-toxic materials ensure the highest purity and safety
- NSF 14 and 61 certified
- ASTM F876/F877 certified
- 25-year warranty
Can be used which makes them an economical choice. For use with copper, brass, aluminum and welded steel hydraulic tubing that can be flared. Not for underground use.
- Withstand temperatures up to 212 degree F
- Pressure up to 150 psi
- Brass
- 2-year warranty against defect
- Lead free
- Adapter