The NIBCO PVC DWV male adapter is used in residential and commercial drain, waste and vent systems. The PVC DWV male adapter features a hub x male NPT thread connection and provides a means for adapting a solvent weld connection to a threaded connection. Polyvinyl chloride (PVC) is the most frequently specified of all thermoplastic materials because of its light weight, durability, and cost-effectiveness.

• PVC requires a primer before cementing
• For above-ground DWV
• Adapts PVC pipe to standard female pipe threads using solvent
• Smooth interior finish for reduced friction and material buildup
• Helps remove waste water and waterborne wastes from plumbing fixtures and appliances
• Do not test or use with compressed air or other gases
• Maximum service temperature 140 degree F

ApolloPEX is cross-linked polyethylene tubing designed for use within potable water piping systems. ApolloPEX Pipe provides superior durability, corrosion resistance and flexibility for the most demanding environments. ApolloPEX is available in red, white and blue for the simple identification of cold water, hot water and main water lines. The ApolloPEX system is a comprehensive piping system comprised of brass fittings, poly alloy fittings, manifolds, valves, fasteners, tools and tubing designed for implementation in water delivery systems, simple or complex.

• Superior flexibility reduces the number of fittings required for installation which also reduces leak points within piping systems
• Durable and corrosion resistant pipe endures most installation environments
• Suitable for wet or dry installations and immediate pressure testing
• Compatible with ApolloPEX system fittings and tectite by Apollo push-to-connect fittings
• Listed to NSF 14 and CSA B137.5 for use in potable water distribution piping systems
• Center-pull coil speeds installation
• Available in coils (25 ft. - 500 ft.) and sticks (2 ft. - 20 ft.) some sizes special order only
• Pressure & Temperature: 160 psi @ 73° F, 100 psi @ 180° F
• Designed, manufactured and tested to meet or exceed the requirements of ASTM F-876/877/2023 and CSA B137.5
• The tubing may be installed in concrete, gypsum based lightweight concrete, sand, asphalt, in or under wood flooring, or behind wallboard or plaster
• Type B cross-linked polyethylene

The Apollo Expansion PEX 1/2 in. x 3/4 in. Brass PEX-A Reducing Barb Coupling is simple to install. Apollo Expansion PEX barb fittings are a key component to one of the most economical potable water piping systems. Also capable of integration into hydronic heating systems, Apollo Expansion PEX couplings must be secured into place Apollo Expansion PEX sleeves or comparable expansion-type sleeve or ring (all sold separately). The Apollo Expansion PEX system is a comprehensive piping system comprised of lead free brass fittings, poly alloy fittings, manifolds, valves, fasteners, tools and tubing designed for implementation in water delivery systems, simple or complex. A cold-expansion tool (sold separately) is required for installation.

• Compatible with Uponor and Wirsbo PEX piping systems
• Larger internal diameter of Apollo expansion PEX fittings results in a 25% greater flow rate within the system
• Constructed of lead free DeZincification Resistant (DZR) brass for superior reliability and strength
• Cold-expansion tool (sold separately) is required for installation
• Meets or exceeds ASTM F1960 standard
• Meets UPC, IPC, and cUPC standard requirements
• Must secured in place using Apollo Expansion PEX sleeves or other PEX-A expansion sleeves/rings
• NSF Listed
• Barb x barb connection for PEX-A plumbing systems
• Go/no-go gauges are never required
• To ensure secure connections every time, fittings cannot be dry fit
• Rated to 200 degree F and 200 psi
• Item is not compatible with PEXb pipe, crimp-style (ASTM 1807) or pinch clamp (ASTM F2098) piping systems

The 1/2 in. SharkBite Push-Fit x FNPT Adapter allows you to make a connection to 1/2 in. pipe using a push-fit connection and then gives you a 1/2 in. Female NPT Adapter on the opposite end. SharkBite fittings are the easiest way to join copper, cPVC or PEX pipe in any combination with no soldering, clamps, unions or glue. Just insert the pipe and the stainless steel teeth bite down and grip tight, while a specially formulated O-ring compresses to create a perfect seal. Disassembly is just as fast using the simple disconnect tool so fittings and valves can be easily changed and reused. They can even be rotated after assembly for easier installation in tight spaces. SharkBite Fittings are certified for potable water supply and hydronic heating applications. Get SharkBite and get a grip on your next plumbing project.

• Lead free DZR brass construction for durability and reliability
• Use to connect to any combination of copper, PEX, CPVC, or PE-RT pipes
• Innovative push-to-connect design makes for quick and easy installation
• Push-to-connect fittings require no solder, glue, unions, or tools
• Rated to 200 degree F and 200 psi
• Meets all UPC, IPC and cUPC requirements

The 3/4 in. male sweat x 3/4 in. barb copper adapter fitting offers contractors labor savings and flexibility, ideal for commercial or residential projects. Designed to fit inside a wrought copper fitting and with PEX systems, the innovative construction eliminates the need for soldering, heating, or specialty tools. The lead-free cooper material delivers dependability for building owners. High-temp and freeze-resistant materials allows for adaptation to hot and cold water applications.

• High-temp and freeze-resistant materials adapt to both hot and cold water applications for PEX systems
• Crimp installation eliminates the need for soldering, heating or specialty tools
• Cooper construction holds up to years of use and ensures sanitation
• Pressure ratings of up to 80 psi at 200 degree F handles the high demand of commercial usage
• NSF 61-certified
• 25-year warranty proven to last the lifetime of the building

Streamline Copper Fittings have been the leading brand of copper fittings for over 80-years. Our product selection has grown to become the most extensive in the industry. Quality, consistency and reliability have made the Streamline brand trusted and specified all around the world.

• For use in above-ground potable water supply systems
• UL recognized to 700 psi
• Constructed of high-grade copper or bronze materials
• Made to applicable ASME standards B16.15, B16.18, B16.22, B16.24, B16.50, B1.20.1
• Wrot fittings meet NSF 61G
• Specified brand of industry professionals

This pipe fitting is easy to use for both contractors and the do-it-yourself. Ideal for use with copper, brass, iron pipe on oil. Not for underground use.

• Withstand temperatures up to 212 degree F
• Pressure up to 400 psi
• 2-year warranty against defect
• Do not over-tighten
• Red brass
• Nipple

This pipe fitting is easy to use for both contractors and the do-it-yourself. Ideal for use with copper, brass, iron pipe on oil. Not for underground use.

• Withstand temperatures up to 212 degree F
• Pressure up to 400 psi
• 2-year warranty against defect
• Do not over-tighten
• Red brass
• Nipple

This 3/8 in. compression connector features a solid brass construction. It is chrome plated finish. It can be used in both indoors and outdoors.

• Made of brass
• Lead free
• Fittings
• Chrome plated
• Individually packed
• Solder

The ¾ in. barb x ½ in. barb brass elbow fitting offers contractors labor savings and installation flexibility, ideal for hospital or residential projects. Used to make sharp 90 degree turns, the fitting doesn't require soldering, heating, or specialty tools for speedy installation. The lead-free eco-brass construction delivers dependability and peace of mind for building owners. High-temp and freeze-resistant materials allows for adaptation to hot and cold water applications for PEX systems.

• High-temp and freeze-resistant materials adapt to both hot and cold water applications for PEX systems
• Crimp installation eliminates the need for soldering, heating or specialty tools
• Lead-free, eco-brass construction holds up to years of use and ensures sanitation
• 90 degree bend allows for sharp turn flow of potable water from a single indoor main line
• Pressure ratings of up to 80 PSI at 200 degree F handles the high demand of commercial usage
• NSF 61-certified
• 25-year warranty proven to last the lifetime of the building

Southland offers both black and galvanized welded steel nipples in 15 diameters from 1/8 in. to 6 in. and with different lengths ranging from Close up to 12 in. Available individually or in pre-packaged assortments, we also offer a full selection of ready cut welded steel pipes in the same diameters lengths ranging from 18 up to 72. All galvanized are zinc coated for use in water applications complying with the NSF 372 lead-free requirements.

• ANSI/ASME B.16.3, B-16.14, B16-39 and Threads: ANSI B1.20.1
• Steel nipples/Pre-Cut Pipe meet material: ANSI/ASTM A.733.A5320; Threads: ANSI B1.20.1
• Galvanized Steel Nipple can be used in residential drainage and potable water applications. The nipple can be used to repair pipe or make an extension from a fitting or existing pipe.
• Nipple complies with NSF 372 lead free
• Long useful life
• Easy to install, ready to use

Can be used which makes them an economical choice. For use with copper, brass, aluminum and welded steel hydraulic tubing that can be flared. Not for underground use.

• Withstand temperatures up to 212 degree F
• Pressure up to 150 psi
• Brass
• 2-year warranty against defect
• Leaded
• Adapter

Fix your copper pipe with the Mueller 3/4 in. Copper Cap. This copper fitting is constructed of Wrot Copper for long lasting durability and strength. The design meets all applicable plumbing standards.

• For use in above-ground potable water supply systems
• UL recognized to 700 psi
• Constructed of high-grade copper or bronze materials
• Made to applicable ASME standards B16.15, B16.18, B16.22, B16.24, B16.50, B1.20.1
• Wrot fittings meet NSF 61G
• Specified brand of industry professionals

The NIBCO 2 in. PVC DWV 60 degree Hub x Hub Elbow features a PVC construction that helps air circulate in piping used with DWV systems. The fitting bends at a 60 degree angle to change the direction of piping. PVC DWV is easy to install and is joined by solvent cementing or threading.

• PVC construction
• For use with DWV systems to help remove wastewater from plumbing fixtures
• Helps air circulate in drainage piping
• Changes the direction of piping 60 degree
• Solvent weld connections
• Apply a primer to the PVC before cementing

CPVC/Stainless Steel Adaptor PEX Barb x Socket. This product complies with all Federal Low Lead laws. Item molded in the USA.

• Lead free
• NSF low lead rated
• Stainless steel
• USA made

The future is here with Viega PureFlow Press. As the leader in press technology, Viega was the first to offer a true press system to the PEX market. Available in sizes from 3/8 in. to 2 in.

• Factory assembled fittings reduce installation errors on the job site
• Viega smart connect technology for pureflow press polymer helps identify un-pressed connections
• Available in 2-materials, proprietary zero lead bronze and high-performance polymer
• System matched tools provide a consistent connection every time
• NSF 14 and NSF61-G approved for potable water systems and suitable for radiant heating systems
• Press connection

The Tectite by Apollo 1 in. Brass Push-To-Connect PVC (Iron Pipe Size) Slip Repair Coupling is an innovation designed to make a quick repairs to Schedule 40, Schedule 80 and Schedule 120 PVC pipe. The slip capability allows a section (up to 2 in.) of pipe to be cut out allowing for the easy installation of the fitting where rigid pipes do not allow movement. Simply insert the slip coupling on to the pipe and using the Tectite by Apollo demount clip (included) to slip the fitting back onto the other end of pipe completing the connection. Great for emergencies and freeze repairs, the Tectite by Apollo Push-To-Connect PVC (Iron Pipe Size) Slip Repair Coupling is the fastest, cleanest and simplest way to repair PVC pipe without the use of tools, solder, open flame or glue. Unlike standard PVC repair methods, Tectite by Apollo Push-To-Connect PVC (Iron Pipe Size) Slip Repair Couplings can be installed in wet conditions Fitting removal and reuse is just as simple using a simple demount clip (included). After assembly, fitting may be rotated for simpler installation in tight spaces. All Tectite by Apollo fittings are approved for use in both potable water and hydronic heating piping systems.

• Constructed of lead free dezincification resistant (DZR) brass for superior reliability
• Push-to-connect joints require no heat, solder, solvents or tools
• Push-to-connect design allows for a simple and fast installation on any schedule 40, 80 or 120 PVC pipe
• Fittings can be rotated after being installed for ease of use in tight spaces
• Ideal for potable water and hydronic heating applications
• Listed by IAPMO and listed to ASSE 1061/NSF 61
• Meets UPC, IPC, and cUPC standard requirements
• Demount clip allows for fitting removal (included)
• Approved for behind-the-wall with no access and burial
• Corrosion resistant for greater longevity
• Maximum working pressure of 200 psi and maximum temperature of 250 degree F

• Connects Cast Iron, Plastic, Steel, Copper and Tubular, Drain Waste and Vent Systems
• Neoprene Gasket with 300 Series Stainless Steel Shield and Clamps
• Boca, Sbcci Approved
• Connects Cast Iron, Plastic, Steel, Copper and Tubular, Drain Waste and Vent Systems
• Neoprene Gasket with 300 Series Stainless Steel Shield and Clamps
• Boca, Sbcci Approved

Can be used which makes them an economical choice. For use with copper, brass, aluminum and welded steel hydraulic tubing that can be flared. Not for underground use.

• Withstand temperatures up to 212 degree F
• Pressure up to 150 psi
• Brass
• 2-year warranty against defect
• Lead free
• Adapter

LASCO Fittings, Inc., specializes in the production and sale of injection molded fittings for Irrigation, Plumbing, Industrial, Pool/Spa and Retail markets. LASCO Fittings, Inc.s comprehensive line of PVC injection molded fittings offers a variety of configurations in sizes 3/8 through 12. Schedule 80 fittings are manufactured to ASTM D 2467.

• ASTM D-1784 Rigid Poly (Vinyl Chloride) (PVC) Compounds and Chlorinated Poly (Vinyl Chloride) (CPVC) Compounds
• ASTM D-2464 Threaded Poly (Vinyl Chloride) (PVC) Plastic Pipe Fittings, Schedule 80
• ASTM D-2467 Socket Type Poly (Vinyl Chloride) (PVC) Plastic Pipe Fittings, Schedule 80
• ASTM F-1970 Standard Specification for Special Engineered Fittings, Appurtenances or Valves for use in Poly (Vinyl Chloride) (PVC) or Chlorinated Poly (Vinyl Chloride) (CPVC) Systems
• LASCO Schedule 80 Fittings are produced from PVC Type 1, Cell Classifi cation 12454- B
• NSF (National Sanitation Foundation) for potable water services
• DO NOT USE LASCO FITTINGS FOR COMPRESSED AIR OR GASES
• DO NOT USE FITTINGS WITH LIQUIDS NOT RECOMMENDED BY LASCO

Zurn Copper Crimp Ring, 1/2 In. Annealed copper crimp ring Used in hot and cold water plumbing applications. For use with SDR9 tubing. This product is manufactured in China.

• Zurn Copper Crimp Ring, 1/2 In
• Annealed copper crimp ring Used in hot and cold water plumbing applications For use with SDR9 tubing
• This product is manufactured in China
• 25 year limited warranty
• Copper
• Used in hot and cold water plumbing applications
• For use with SDR9 tubing

The future is here with Viega PureFlow Press. As the leader in press technology, Viega was the first to offer a true press system to the PEX market. Available in sizes from 3/8 in. to 2 in.

• Factory assembled fittings reduce installation errors on the job site
• Viega smart connect technology for PureFlow press polymer helps identify un-pressed connections
• Available in 2-materials, proprietary zero lead bronze and high-performance polymer
• System matched tools provide a consistent connection every time
• NSF 14 and NSF61-G approved for potable water systems and suitable for radiant heating systems
• Press connection

Can be used which makes them an economical choice. For use with copper, brass, aluminum and welded steel hydraulic tubing that can be flared. Not for underground use.

• Withstand temperatures up to 212 degree F
• Pressure up to 150 psi
• Brass
• 2-year warranty against defect
• Leaded
• Adapter

This PVC pipe is used for drain, waste, and vent applications. Dual rated for pressure and drainage. Solvent weld design makes it easy for DIY plumbing projects and installation.

• Meets ASTM D1785
• Iron pipe size
• NSF listed
• Compatible with all Genova Sch 40 DWV fittings
• Plumb line feature to use as a reference mark relative to the degree marks on Genova fittings
• Plain end