Special Compound For Lp and Natural Gas. Soft and Slow Drying. Meets CSA Tolerances -50 degree F - +400 degree F. 200 psi Liquid To 1200 psi.

• Special compound for LP and natural gas
• Soft and slow drying
• Never seizes
• Allows easy assembly
• Non-toxic
• Cream colored

Thixotropic Non-Drip Paste For Pipe Joint Threads. On Lines Carrying Water. Never Hardens, Joints Separate Easily, No Lead.

• No drip paste for pipe joint threads
• On lines carrying water
• Never hardens
• Joints separate easily
• No lead
• Limited warranty

Oatey Pink Water Line Thread Seal Tape is a high-density PTFE sealing tape. Provides a fast, positive seal for water lines, sewage lines and sprinkler systems. Oatey products have earned the trust of plumbing professionals for over 100 years.

• 1/2 in. x 260 in. pink thread seal tape
• Designed for use on metal or plastic threaded piping up to 1-1/2 in. diameter
• Can be used with piping in air, water, sewage, hydraulic lines and sprinkler systems
• Made with PTFE construction for longevity
• 3 mils thick, 1.20-1.50 grams/cubic centimeter density
• Complies with MIL-T-27730A

Oatey Clear Cleaner is a fast-acting cleaner that removes surface dirt, grease and grime. It is formulated for all schedules and diameters of ABS, PVC and CPVC pipe and fittings. It's clear finish flows freely, evaporates quickly, will not stain most surfaces and applies easily with included in-lid dauber. Oatey products have earned the trust of plumbing professionals for over 100 years.

• Easy to apply with included in-lid dauber
• Fast-acting cleaner for ABS, PVC and CPVC pipe and fittings
• Removes surface dirt, oils and other contaminants from piping
• Clear in color, will not stain most surfaces
• Formulated for all schedules and diameters of ABS, PVC and CPVC pipe and fittings
• Clear finish flows freely and evaporates quickly
• All Oatey solvent cement and primer products are certified to UL Greenguard Gold
• Low VOC cleaner that meets California South Coast Air Quality Management Districts (SCAQMD) 1168/316A or BAAQMD Method 40 requirements, and complies with NSF/ANSI 61 health effects requirements

Easily and effectively seal and lubricate threaded pipe joints with the Weld-On Pipe Stick Joint Compound. This convenient pipe stick thread sealant can be quickly applied to both plastic and metal pipe threads, preventing rust and corrosion and allowing easier disassembly of pipes and fittings. The lead-free, nontoxic formula can be used on potable water systems, as well as steam, oil, butane, and propane lines with pressures up to 10,000 PSI and temperatures up to 750 degrees Fahrenheit.

• Thread sealant for metal and plastic pipe
• Convenient stick design for easy application
• Prevents rust and corrosion of the pipe threading, allowing for easier disassembly
• Lead-free, non-toxic formula
• For use on water, steam, oil, butane, and propane lines
• For pipe, metal and plastic

Weld On Cap Dauber. DQ-150 Cap Dauber 1 in. for up to 3 in. Pipe Diameter. Replacement For Lost Or Hardened Daubers. Natural Material.

• 1 1/2" Cap Dauber
• Dauber is conveniently attached to the bottom of the screw cap for application of primer and cement
• Cap creates a tight seal, preventing primers and solvent cements from drying out
• Practical design ensures you always have an applicator on hand
• Blue handle
• Weld On

All-purpose solvent cement is a multi-purpose product specially formulated with solvents and resins for bonding ABS, PVC or CPVC piping systems. Medium-bodied solvent cement has excellent gap filling properties. Creates a strong bond between plastic pipe and fittings.

• All-purpose solvent cement can be used on ABS, PVC or CPVC piping systems
• Medium bodied all-purpose cement can be used up to 6 in. Dia piping
• All-purpose solvent cement can be used for potable water, pressure pipe and drain, waste and vent piping
• Meets performance requirements of ASTM D-2564, D-2235 and F-493
• Check with local building/plumbing codes for acceptability of all-purpose solvent cement
• Packaged in metal can with dauber stem for easy application

will not Harden, Crack Or Crumble. For Setting Closet Bowls, Sink Strainers. Not For Use On Marble.

• Will not harden, crack or crumble
• Used for setting closet bowls
• Used for setting sink strainers
• Not for use on marble
• Limited warranty
• Stainless

Weld On Cap Dauber. DP-75 Cap Dauber for 3/4 in. up to 1 in. Pipe Diameter. Replacement For Lost Or Hardened Daubers. Natural Material.

• 3/4" Cap Dauber
• Dauber is conveniently attached to the bottom of the screw cap for application of primer and cement
• Cap creates a tight seal, preventing primers and solvent cements from drying out
• Practical design ensures you always have an applicator on hand
• Weld On
• Replacement

Oatey All-Purpose ABS, PVC and CPVC Medium Bodied Clear Cement is recommended for DWV, potable water and irrigation applications. Its medium body has excellent gap filling properties and is easy to apply with included in-lid dauber. This milky-clear, all-purpose cement can be used to solvent weld all schedules and classes of ABS, PVC and CPVC pipe and fittings up to 6 in. diameter with interference fit. Oatey products have earned the trust of plumbing professionals for over 100 years.

• 32 oz. all-purpose solvent cement with dauber
• For DWV, irrigation and potable water applications
• Solvent welds ABS, PVC and CPVC pipe
• Medium viscosity easily fills gaps and provides more working time
• Recommended application temperature of 40°F to 110°F / 4°C to 43°C
• Cement appears off-white in the can but dries clear when applied in a thin film
• All Oatey solvent cement and primer products are certified to UL Greenguard Gold
• Low VOC solvent cement that meets California South Coast Air Quality Management Districts (SCAQMD) 1168/316A or BAAQMD Method 40 requirements
• Meets ASTM Standards D2564, D2235 and F505

Oatey Heavy Duty Gray PVC Cement is formulated for use on all schedules and classes PVC pipe and fitting up to 12" diameter with interference fit, up to 18" for non-pressure.

• Lo-V.O.C. Solvent Cement meets California South Coast Air Quality Management District (SCAQMD) 1168/316A or BAAQMD Method 40 and various environmental requirements
• Thick formula fills gaps in large diameter pipe and loose fitting joints
• Recommended application temperature 40°F to 110°F / 4°C to 43°C
• Meets ASTM D2564

Oatey PVC All Weather Medium Bodied Fast Set Clear Cement is recommended for potable water, drain, waste and vent applications. It is formulated to perform in all weather conditions from -15 degree F to 110 degree F and applies easily with included in-lid dauber. This clear, low VOC, medium bodied, fast set cement can be used to solvent weld all schedules and classes of PVC pipe and fittings up to 6 in. diameter with interference fit. Oatey products have earned the trust of plumbing professionals for over 100 years.

• Medium-bodied clear cement for use on all schedules and classes of PVC pipe and fittings up to 6 in. Dia with interference fit
• Low-VOC solvent cement meets California South Coast Air Quality Management District (SCAQMD) 1168 Amp/316 Amp or BAAQMD method 40 and various environmental requirements
• Recommended application temperature -15 degree F to 110 degree F / -26 degree C to 43 degree C
• Recommended for potable water, drain, waste and vent systems
• No primer needed on non-pressure DWV applications, where local codes permit
• Meets ASTM D-2564

Effectively prepare your plastic pipe and fitting surfaces for solvent cement bonding with Weld-On PC-64 PVC/CPVC Primer-Conditioner. Suitable for use with all types, classes, and schedules of PVC and CPVC pipes and fittings, this solvent primer and conditioner features a dual-action formula to ensure proper pipe welding. The primer-conditioner acts as a cleanser, effectively removing grease, oil, and dirt from the bonding surfaces, and it also penetrates and softens the joining surfaces, helping to promote maximum fusion during welding. Follow with the solvent cement of your choice to achieve a strong, high-contact, and long-lasting joint. A preferred choice of contractors worldwide, Weld-On solvent cements and primers are recognized globally for their industry-leading strength and ease-of-use. Commonly referred to as PVC glue, PVC solvent cement fuses pipes and fittings at the molecular level for a durable, high-contact, and long-lasting joint. Choose from a wide selection of Weld-On solvent cements to find the product that is perfect for your application.

• Weld-On 10875 PC-64 Purple PVC/CPVC Primer-Conditioner, Low-VOC, 1/4 pint Can with Applicator Cap, Metal Can
• Fast-acting purple primer pre-softens surfaces to ensure proper PVC/CPVC welding--an essential first step before application of solvent cement
• Compatible with all classes and schedules of PVC and CPVC
• Not for use with potable water systems or applications where codes are involved
• Low-VOC content minimizes environmental impact and helps improve crew working conditions
• Purple primer/cleaner

Oatey PVC Rain-R-Shine Medium Bodied Fast Set Blue Cement is recommended for pool and spa, irrigation, potable water, pressure pipe and DWV applications. It is formulated for wet conditions and quick pressurization, and is easy to apply with included in-lid dauber. This blue, medium bodied, fast set cement can be used to solvent weld all schedules and classes of PVC pipe and fittings up to 6 in. diameter with interference fit. Oatey products have earned the trust of plumbing professionals for over 100 years.

• Rain-R-Shine blue cement solvent welds PVC, dauber included
• Hot cement designed for wet conditions
• Very fast setting for quick pressurization and quick installation
• Can be used on PVC pipe and fittings up to 6 in. diameter with interference fit
• For pool and spa, irrigation, potable water, pressure pipe and DWV applications
• Recommended application temperature of 40°F to 110°F / 4°C to 43°C
• All Oatey solvent cement and primer products are certified to UL Greenguard Gold
• Meets ASTM Standard D2564 and complies with NSF/ANSI 61 health effects requirements
• Please refer to the Oatey Limited Warranty for warranty details

Oatey White PTFE Thread Seal Tape provides a clean, positive seal on threaded connections. Made of durable PTFE, this white-colored thread sealing tape resists tearing and stretching for easy, efficient application. Oatey products have earned the trust of plumbing professionals for over 100 years.

• 1/2 in. x 520 in. white thread seal tape
• Provides a clean, positive seal on threaded connections
• Resists tearing and stretching for easy, efficient application
• Made with PTFE construction for longevity
• Can be used on plastic, brass, copper, aluminum, galvanized steel or black iron piping
• 3 mils thick, 07 grams/cubic centimeter density
• Complies with Military Spec No A-A-58092 & UL 31 RO

GASOILA Soft-Set Thread Sealant will provide the right thread sealant for the task at hand. This pint of soft-set thread sealant features a non-toxic PTFE paste that will ensure a positive seal is in place. This pipe sealant can be used on several different surfaces such as brass, copper, stainless steel, aluminum, tin, galvanized, CPVC, PVC plastics, nylon, polyethylene, polypropylene and more. Our soft-set thread is pliable for applications in even the most extreme of conditions while withstanding high pressure ratings for both liquids and gases. Product is not intended for use with oxygen.

• Soft setting, non-toxic PTFE paste
• Use on threaded brass, copper, stainless steel, aluminum, black pipe, tin, polyethylene, polypropylene, polybutylene, ABS, PVC nylon and galvanized pipe threads, hoses and more diesel oil, propane, butane LPG, cutting oils, ammonia, aliphatic solvents, acids, steam, potable water, compressed air and more
• Remains pliable in cold temperatures, working range is -100 degree F - 600 degree F
• Pressure range is 10,000 psi when sealing liquids and 3,000 psi when sealing gases
• Used by mechanical contractors, plumbers, gas utilities, service station installers, manufacturing plants, etc.
• Use on all metals and most plastics

Ensure the strongest bond possible between pipes and fittings by preparing your surfaces with Weld-On C-65 PVC/CPVC/ABS/Styrene Cleaner. This pipe cleaner effectively removes oil, grease, and dirt from the surfaces of all sizes, classes, and schedules of PVC, CPVC, ABS, and styrene. Use an applicator to apply and scrub the water-thin solvent cleaner onto pipes and fittings before continuing with the appropriate Weld-On primer and solvent cement. Weld-On C-65 may be used on FlowGuard Gold pipes and fittings and may also be used as a brush cleaner. A preferred choice of contractors worldwide, Weld-On solvent cements, cleaners, and primers are recognized globally for their industry-leading strength and ease-of-use. Commonly referred to as PVC glue, PVC solvent cement fuses pipes and fittings at the molecular level for a durable, high-contact, and long-lasting joint. Choose from a wide selection of Weld-On solvent cements to find the product that is perfect for your application.

• Low-VOC cleaner for removal of oil and grease from the surfaces of PVC, CPVC, ABS and STYRENE pipe and fittings
• Designed for use before the application of Weld-On pipe primers and solvent cements
• Can be used on all sizes, classes, and schedules of PVC, CPVC, ABS, and styrene
• Low-VOC content minimizes environmental impact and helps improve crew working conditions
• May be used on FlowGuard Gold pipes and fittings; may also be used as a brush cleaner
• Must be used only as a cleaner

The Oatey 16 oz. Purple Primer is formulated from a mixture of solvents and is designed to remove contaminants such as dirt and oils from the surface of PVC and CPVC pipe and fittings. Includes an in-lid applicator.

• Purple-tinted aggressive primer for use on PVC and CPVC pipe and fittings
• Low-V.O.C. solvent cement meets California south coast air quality management district (SCAQMD) 1168/316A or BAAQMD method 40 and various environmental requirements
• Removes surface dirt, grease and grime as well as softens the pipe surface to allow a fast, secure solvent weld
• For use in areas where plumbing code calls for verification that a primer has been used
• NSF listed
• Meets ASTM F-656

The Oatey 4 oz. Purple Primer is formulated from a mixture of solvents. Designed to remove dirt, oils and other contaminants from the surface of PVC or CPVC piping. Low volatile organic compound (VOC).

• Pre-softens PVC and CPVC pipe and fitting surfaces
• Can be used on any diameter of PVC or CPVC piping
• Do not use on ABS pipe installations
• Meets ASTM F-656
• Removes surface dirt, grease and grime as well as softens the pipe surface to allow a fast, secure solvent weld
• For use in areas where plumbing code calls for verification that a primer has been used

Contains A High Grade Mineral Oil and A Proper Balance Of Lard Oil, Sulfur, Chlorine and A Wetting Agent. For Hand Threading Applications and Iron, Steel, Stainless Steel and Other Metal Material. Formulated with active sulfur.

• Contains a high grade mineral oil
• Contains the proper balance of oil, sulfur, chlorine and wetting agent
• For use in hand threading applications
• High film strength
• Contains a high grade mineral oil and a proper balance of lard oil, sulfur, chlorine and a wetting agent for hand threading applications and iron, steel, stainless steel also for us in other metal material
• Limited warranty

Oatey PVC All Weather Medium Bodied Fast Set Clear Cement is recommended for potable water, drain, waste and vent applications. It is formulated to perform in all weather conditions from -15 degree F to 110 degree F and applies easily with included in-lid dauber. This clear, low VOC, medium bodied, fast set cement can be used to solvent weld all schedules and classes of PVC pipe and fittings up to 6 in. diameter with interference fit. Oatey products have earned the trust of plumbing professionals for over 100 years.

• All weather clear cement solvent welds PVC, dauber included
• For potable water, drain, waste and vent applications
• For all schedules and weather conditions, including the very cold
• Can be used on all schedules and classes of PVC pipe and fittings up to 6 in. diameter with interference fit
• Recommended application temperature of -15 degree F to 110 degree F / -26 degree C to 43 degree C
• No primer needed on non-pressure DWV, where local codes permit
• All Oatey solvent cement and primer products are certified to UL Greenguard Gold

Contains A High Grade Mineral Oil and A Proper Balance Of Lard Oil, Sulfur, Chlorine and A Wetting Agent. For Hand Threading Applications and Iron, Steel, Stainless Steel. Also for us in other Metal Material.

• Contains a high grade mineral oil
• Contains the proper balance of oil, sulfur, chlorine and wetting agent
• For use in hand threading applications
• High film strength
• For lubricating and cooling dies and cutting machines
• Gallon size

The Oatey 32 oz. PVC Primer and Cleaner is formulated from a mixture of solvents and is designed to remove dirt, oils and other contaminants from the surface of PVC and CPVC piping. Clear primer will not stain most surfaces. Includes in-lid applicator.

• Clear aggressive primer for use on PVC and CPVC pipe and fittings
• Lo-V.O.C. solvent cement meets California South Coast Air Quality Management District (SCAQMD) 1168/316A or BAAQMD method 40 and various environmental requirements
• Removes surface dirt, grease and grime as well as softens the pipe surface to allow a fast, secure solvent weld
• NSF listed
• Meets ASTM F656
• 32 oz. resealable can

Won't Harden, Crack Or Crumble. For Setting Closet Bowls, Sink Strainers. Not For Use On Marble.

• Will not support bacteria
• Easily workable, soft, pliable material
• Do not use on marble, synthetic marble, other porous surfaces or on plastic lavatories and fixtures
• Meets federal specification TT-P-1536A
• 5 lb. size
• Will not harden, crack or crumble

Contains A High Grade Mineral Oil and A Proper Balance Of Lard Oil, Sulfur, Chlorine and A Wetting Agent. For Hand Threading Applications and Iron, Steel, Stainless Steel and Other Metal Material. Superior quality.

• Specially formulated to give sharp clean threads and extend die life
• Can be used on stainless steel, heavy duty cutting, threading tapping and broaching of steel
• Superior quality cutting oil that can be used on most metals
• Gives sharper threads
• Gallon size
• Limited warranty

Oatey Blue Lava Medium Bodied Fast Set Hot Cement is recommended for DWV repair, irrigation, and pool and spa applications. It is formulated for wet conditions, quick pressurization and fast installation, and is easy to apply with included in-lid dauber. This blue, medium body, very fast setting PVC cement can be used to solvent weld all schedules and classes of PVC pipe and fittings up to 6 in. diameter with interference fit. Oatey products have earned the trust of plumbing professionals for over 100 years.

• Very fast setting blue cement solvent welds PVC, dauber included
• For DWV repair, irrigation, and pool and spa applications
• Fast pressurization and joint strength development in all weather
• Can be used on all schedules and classes of PVC pipe and fittings up to 6 in. diameter with interference fit
• No primer needed on non-pressure DWV, where local codes permit
• Recommended application temperature of 40°F to 110°F / 4°C to 43°C
• All Oatey solvent cement and primer products are certified to UL Greenguard Gold
• Meets ASTM Standard D2564 and complies with NSF/ANSI 61 health effects requirements
• Please refer to the Oatey Limited Warranty for warranty details

Oatey PVC Heavy Duty Medium Set Clear Cement is recommended for DWV, pressure pipe, potable water and electrical applications. Its thick formula fills gaps in large diameter pipe and loose-fitting joints and is easy to apply with included in-lid dauber. This clear, heavy duty, medium set cement can be used to solvent weld all schedules and classes of PVC pipe and fittings with interference fit up to 18 in. diameter for non-pressure and 12 in. diameter for pressure pipes. Oatey products have earned the trust of plumbing professionals for over 100 years.

• Clear cement solvent welds PVC pipe and fittings, dauber included
• For DWV, pressure pipe, potable water and electrical applications
• Thicker formula fills gaps for strong bond and easy application
• Can be used on all schedules and classes of PVC pipe and fittings with interference fit, up to 12 in. diameter for pressure and 18 in. for non-pressure pipes
• Recommended application temperature of 40°F to 110°F / 4°C to 43°C
• All Oatey solvent cement and primer products are certified to UL Greenguard Gold
• Meets ASTM Standard D2564 and complies with NSF/ANSI 61 health effects requirements
• Please refer to the Oatey Limited Warranty for warranty details

Clear Primer is recommended for use with PVC and CPVC pipe and fittings. Clear Primer is formulated to remove dirt and oil from the surface of the piping, as well as soften the piping in preparation for solvent welding. This product is compliant with California South Coast Air Quality Management District (SCAQMD) Rule 1168 and Ozone Transport Commission (OTC) regulations for Volatile Organic Compound emission levels.

• Meets ASTM F656
• Lo-VOC solvent cement meets SCAQMD 1168/316A or BAAQMD method 40 and various environmental requirements
• NSF listed
• Removes surface dirt, grease and grime as well as softens the pipe surface to allow a fast, secure solvent weld
• Clear in color
• For use on PVC cement

Oatey PVC All Weather Medium Bodied Fast Set Clear Cement is recommended for potable water, drain, waste and vent applications. It is formulated to perform in all weather conditions from -15 degree F to 110 degree F and applies easily with included in-lid dauber. This clear, low VOC, medium bodied, fast set cement can be used to solvent weld all schedules and classes of PVC pipe and fittings up to 6 in. diameter with interference fit. Oatey products have earned the trust of plumbing professionals for over 100 years.

• Clear, mixed-solvent cleaner
• Can be used on ABS, PVC and CPVC pipe and fittings
• Quickly removes grime from pipe surfaces
• Will not stain most surfaces
• Removes dirt, oils and other contaminants from piping
• In lid applicator

Multi Purpose Weld On Cement 1/4 Pint Clear. Low VOC, Medium Bodied, Fast Setting. For all Rigid PVC, cPVC, ABS and Styrene. Up to 4 in. Schedule 80, 6 in. All Other.

• Multi purpose weld on cement 1/4 Pint clear
• Medium-bodied, high-strength light amber PVC and CPVC cement applies smoothly and sets quickly
• Low-VOC formula reduces solvent emissions for a better working environment
• Compatible with all rigid PVC and CPVC pipes and fittings up to 6 inches and up to 4 inches Schedule 80; not for transition use between dissimilar materials
• Meets SCAQMD Rule 1168/316A, NSF/ANSI 14 performance specifications; contributes toward satisfying Indoor Environmental Quality credits (IEQ credit 4.1) for LEED v4
• Low VOC

Oatey Medium Orange CPVC Cement is formulated for use on all schedules and classes of CPVC pipe and fittings up to 6 in. Dia with interference fit. This cement has medium viscosity for easy installation. Meets ASTM F493.

• Medium-bodied orange cement for use on all schedules and classes of CPVC pipe and fittings up to 6 in. Dia with interference fit
• Lo-V.O.C. solvent cement meets California south coast air quality management district(SCAQMD) 1168/316A or BAAQMD method 40 and various environmental requirements
• For residential and commercial hot and cold water systems up to 200 degree F / 93 degree C
• Recommended application temperature 40 degree F to 110 degree F / 4 degree C to 43 degree C
• Approved for Corzan CPVC piping systems
• Meets ASTM F493

Weld-On 773 ABS Solvent Cement delivers high-strength bonding and stability that contractors can rely on for a variety of ABS piping installations. This black ABS pipe cement creates a deep, fusion between all classes and schedules of rigid ABS pipes and fittings with an interference fit up to an 8-inch diameter. Weld-On 773 ABS cement is great for plumbing applications, such as DWV (drain, waste, and vent) systems and sewers, as well as electrical conduits and foam core pipes. Thanks to its medium-bodied viscosity and fast relative set time, this ABS solvent cement applies smoothly and sets rapidly to facilitate efficient ABS welding. A preferred choice of contractors worldwide, Weld-On solvent cements are recognized globally for their industry-leading strength and ease-of-use. Commonly referred to as ABS glue, ABS solvent cement fuses pipes and fittings at the molecular level for a durable, high-contact, and long-lasting joint. Choose from a wide selection of Weld-On solvent cements to find the product that is perfect for your application.

• ABS tank fill kit
• Medium-bodied, high-strength black ABS cement applies smoothly and sets quickly
• Low-VOC formula reduces solvent emissions for a better working environment
• Compatible with all rigid ABS pipes and fittings up to 8 inches
• Meets SCAQMD Rule 1168/316A, ASTM D2235, NSF/ANSI 14, performance specifications; contributes toward satisfying Indoor Environmental Quality credits (IEQ credit 4.1) for LEED v4
• Low VOC

Premium pipe thread sealant with PTFE. Provides a positive seal on pipe thread, joints, fittings, hoses, nozzles, LPG cylinders, pump assemblies, motors, oil burners, hydraulics, compressors, engines, housings, plugs, fuel lines, couplings and more. Excellent resistance to gasoline, up to 20% alcohol and petroleum blends, petroleum solvents, kerosene, diesel oil, propane, butane, LPG, cutting oils, ammonia, aliphatic solvents, acids, steam, potable water, compressed air and more.

• Soft-setting, non-hardening and non-toxic paste with PTFE
• Use on threaded brass, copper, stainless steel, aluminum, black pipe, tin, polyethylene, polypropylene, polybutylene, ABS, PVC nylon and galvanized pipe threads, hoses and more
• Pressure range is 10,000 psi when sealing liquids and 3,000 psi when sealing gases
• Remains pliable in cold temperatures, working range is -100 degree F to 600 degree F
• Not for use on oxygen systems
• Temperature range: -100 degree F to 600 degree F (-74 degree C to 318 degree C); pressure range: to 10,000 psi sealing liquids; to 3,000 psi sealing gases

Oatey White PTFE Thread Seal Tape provides a clean, positive seal on threaded connections. Made of durable PTFE, this white-colored thread sealing tape resists tearing and stretching for easy, efficient application. Oatey products have earned the trust of plumbing professionals for over 100 years.

• 3/4 in. x 260 in. white thread seal tape
• Provides a clean, positive seal on threaded connections
• Resists tearing and stretching for easy, efficient application
• Made with PTFE construction for longevity
• Can be used on plastic, brass, copper, aluminum, galvanized steel or black iron piping
• 3 mils thick, 07 grams/cubic centimeter density
• Complies with Military Spec No A-A-58092 & UL 31 RO

Ensure the strongest bond possible between pipes and fittings by preparing your surfaces with Weld-On C-65 PVC/CPVC/ABS/Styrene Cleaner. This pipe cleaner effectively removes oil, grease, and dirt from the surfaces of all sizes, classes, and schedules of PVC, CPVC, ABS, and styrene. Use an applicator to apply and scrub the water-thin solvent cleaner onto pipes and fittings before continuing with the appropriate Weld-On primer and solvent cement. Weld-On C-65 may be used on FlowGuard Gold pipes and fittings and may also be used as a brush cleaner. A preferred choice of contractors worldwide, Weld-On solvent cements, cleaners, and primers are recognized globally for their industry-leading strength and ease-of-use. Commonly referred to as PVC glue, PVC solvent cement fuses pipes and fittings at the molecular level for a durable, high-contact, and long-lasting joint. Choose from a wide selection of Weld-On solvent cements to find the product that is perfect for your application.

• Low-VOC cleaner for removal of oil and grease from the surfaces of PVC, CPVC, ABS and STYRENE pipe and fittings
• Designed for use before the application of Weld-On pipe primers and solvent cements
• Can be used on all sizes, classes, and schedules of PVC, CPVC, ABS, and styrene
• Low-VOC content minimizes environmental impact and helps improve crew working conditions
• May be used on FlowGuard Gold pipes and fittings; may also be used as a brush cleaner
• C-65

Ensure the strongest bond possible between pipes and fittings by preparing your surfaces with Weld-On C-65 PVC/CPVC/ABS/Styrene Cleaner. This pipe cleaner effectively removes oil, grease, and dirt from the surfaces of all sizes, classes, and schedules of PVC, CPVC, ABS, and styrene. Use an applicator to apply and scrub the water-thin solvent cleaner onto pipes and fittings before continuing with the appropriate Weld-On primer and solvent cement. Weld-On C-65 may be used on FlowGuard Gold pipes and fittings and may also be used as a brush cleaner. A preferred choice of contractors worldwide, Weld-On solvent cements, cleaners, and primers are recognized globally for their industry-leading strength and ease-of-use. Commonly referred to as PVC glue, PVC solvent cement fuses pipes and fittings at the molecular level for a durable, high-contact, and long-lasting joint. Choose from a wide selection of Weld-On solvent cements to find the product that is perfect for your application.

• Low-VOC cleaner for removal of oil and grease from the surfaces of PVC, CPVC, ABS and STYRENE pipe and fittings
• Designed for use before the application of Weld-On pipe primers and solvent cements
• Can be used on all sizes, classes, and schedules of PVC, CPVC, ABS, and styrene
• Low-VOC content minimizes environmental impact and helps improve crew working conditions
• May be used on FlowGuard Gold pipes and fittings; may also be used as a brush cleaner
• Removes grease, oil and dirt from bonding surfaces

Medium bodied, fast setting, low VOC multi-purpose cement for all classes and schedules with interference fit through 6 in. (160 mm) of diameter, Sch. 80 through 4 in. (110 mm) of diameter. High-strength cement for PVC and CPVC pipe and fittings. Can be used on ABS and styrene low-pressure systems.

• Low VOC
• Medium-bodied, high-strength light amber PVC and CPVC cement applies smoothly and sets quickly
• Low-VOC formula reduces solvent emissions for a better working environment
• Compatible with all rigid PVC and CPVC pipes and fittings up to 6 inches and up to 4 inches Schedule 80; not for transition use between dissimilar materials
• Meets SCAQMD Rule 1168/316A, NSF/ANSI 14 performance specifications; contributes toward satisfying Indoor Environmental Quality credits (IEQ credit 4.1) for LEED v4
• For PVC and CPVC pipe
• Multi-purpose

Specially formulated for joining the seams of vinyl shower pan liners, the Weld-On 660 PVC Shower Pan Liner Solvent Cement produces long-lasting, water-resistant bonds. This fast-drying solvent cement provides instant strength, which increases as the solvent dissipates. To use, simply apply the clear PVC solvent cement to the desired shower pan liner seams, press them together, and hold for a few seconds until you feel the grab begin. The bond strength will be good within a few minutes and excellent within 24-48 hours, continuing to strengthen for weeks. This solvent cement has a working time of 2-20 minutes and can be used on both wet and dry surfaces. A preferred choice of contractors worldwide, Weld-On solvent cements are recognized globally for their industry-leading strength and ease-of-use. Commonly referred to as PVC glue, PVC solvent cement fuses pipes and fittings at the molecular level for a durable, high-contact, and long-lasting joint. Choose from a wide selection of Weld-On solvent cements to find the product that is perfect for your application.

• Fast-drying solvent cement for PVC shower pan liners
• Joins sheets of PVC shower pan liner together; provides a permanent watertight seal
• Good bond strength develops within a few minutes and is excellent within 24-48 hours; continues to strengthen for weeks
• Can be used on both wet and dry surfaces; working time of 2-20 minutes
• Low-VOC formula reduces solvent emissions for a better working environment
• PVC

Create permanent and water-tight fusion between CPVC pipes and fittings with Weld-On FlowGuard Gold CPVC Solvent Cement. Designed for both residential and industrial plumbing systems, this CPVC pipe cement is suitable for copper-tube-size pipes and fittings with an interference fit up to a 2 in. Dia and is compatible with water piping systems up to 180° F (82° C). This Solvent Cement has been approved for use on FlowGuard Gold CPVC piping systems. In addition to residential and commercial plumbing applications, the pipe cement can also be used for potable water systems in mobile homes and recreational vehicles. For added ease of use, this 1-step cement can be applied without primer if codes permit. And thanks to its medium-bodied viscosity and fast relative set time, this CPVC solvent cement applies smoothly and sets quickly to facilitate efficient CPVC welding, even in wet environments. A preferred choice of contractors worldwide, Weld-On solvent cements are recognized globally for their industry-leading strength and ease-of-use. Commonly referred to as CPVC glue, CPVC solvent cement fuses pipes and fittings at the molecular level for a durable and long-lasting joint. Choose from a wide selection of Weld-On solvent cements to find the product that is perfect for your application.

• Medium-bodied, fast-setting, low-VOC CPVC cement for copper tube size pipe and fittings with interference fit through 2 in. (63 mm) diameter
• Medium-bodied, high-strength yellow CPVC cement applies smoothly and sets quickly, even in wet environments
• Low-VOC formula reduces solvent emissions for a better working environment
• Compatible with copper-tube-size pipes and fittings up to 2 in. with a maximum temperature of 180° F (82° C)
• Meets SCAQMD Rule 1168/316A, ASTM D2846, ASTM F493, NSF/ANSI 14, and NSF/ANSI 61 performance specifications, contributes toward satisfying Indoor Environmental Quality credits (IEQ credit 4.1) for LEED v4
• Product is available in 1/4 pt. (118 ml), 1/2 pt. (237 ml), 1 pt. (473 ml), 1 qt. (946 ml) and 1 Gal. (3.785 l) metal cans

Oatey Great White Pipe Joint Compound with PTFE lubricates and seals all threaded joints. Both non-hardening and non-toxic, Great White can be used on plastic or metal threads in systems carrying water, steam, caustics or dilute acids. It includes a convenient in-lid brush for easy application. Oatey products have earned the trust of plumbing professionals for over 100 years.

• 8 oz. pipe joint compound
• Lubricates and seals all threaded joints
• For use on lines carrying water, steam, caustics or dilute acids
• Compatible with PVC, CPVC, ABS, cycolac, polypropylene, iron, steel or copper
• Approved for use on Flowguard Gold, Blazemaster and Corzan piping systems
• Withstands up to 10,000 PSI on liquids from -50° to 500°F and up to 3,000 PSI on gases from -50° to 400°F
• Low odor, non-hardening, non-toxic and non-staining
• Allows for easy disassembly without stripping or damaging threads
• Includes convenient in-lid brush applicator
• Certified to NSF, IAPMO and FBC

Formulated for versatility, Weld-On 780 PVC Plumbing Solvent Cement delivers high-strength bonding and stability that plumbing professionals can rely on for a variety of piping installations. This PVC plumbing cement creates a deep fusion between pipes and fittings with an interference fit up to a 4 in. Dia. It is suitable for all classes and schedules of PVC, except Schedule 80. The clear PVC plumbing solvent cement excels across a range of applications, including potable water pressure systems, sewers and DWV (drain, waste and vent) systems. with its regular-bodied viscosity and fast relative set time, this PVC plumbing solvent cement applies smoothly and sets quickly to facilitate efficient PVC welding. A preferred choice of contractors worldwide, Weld-On solvent cements are recognized globally for their industry-leading strength and ease-of-use. Commonly referred to as PVC glue, PVC solvent cement fuses pipes and fittings at the molecular level for a durable and long-lasting joint. Choose from a wide selection of Weld-On solvent cements to find the product that is perfect for your application.

• Product is highly durable
• Regular-bodied, high-strength clear PVC plumbing cement applies smoothly and sets quickly
• Low-VOC formula reduces solvent emissions for a better working environment
• Compatible with all PVC pipes and fittings up to 4 in. (except schedule 80)
• Meets SCAQMD Rule 1168/316A, ASTMD2564, NSF/ANSI 14 and NSF/ANSI 61 performance specifications, contributes toward satisfying Indoor Environmental Quality credits for LEED v4
• Weld on

Weld-On 773 ABS Solvent Cement delivers high-strength bonding and stability that contractors can rely on for a variety of ABS piping installations. This black ABS pipe cement creates a deep, fusion between all classes and schedules of rigid ABS pipes and fittings with an interference fit up to an 8 in. diameter. Weld-On 773 ABS cement is great for plumbing applications, such as DWV (drain, waste, and vent) systems and sewers, as well as electrical conduits and foam core pipes. Thanks to its medium-bodied viscosity and fast relative set time, this ABS solvent cement applies smoothly and sets rapidly to facilitate efficient ABS welding. A preferred choice of contractors worldwide, Weld-On solvent cements are recognized globally for their industry-leading strength and ease-of-use. Commonly referred to as ABS glue, ABS solvent cement fuses pipes and fittings at the molecular level for a durable, high-contact, and long-lasting joint. Choose from a wide selection of Weld-On solvent cements to find the product that is perfect for your application.

• Medium-bodied, fast-setting, low-voc ABS cement for all classes and schedules with interference fit through 8 in. (200 mm) diameter
• Medium-bodied, high-strength black ABS cement applies smoothly and sets quickly
• Low-voc formula reduces solvent emissions for a better working environment
• Compatible with all rigid ABS pipes and fittings up to 8 in.
• Meets scaqmd rule 1168/316 a, ASTM d2235, nsf/ansi 14, performance specifications contributes toward satisfying indoor environmental quality credits (ieq credit 4.1 ) for leed v4
• High strength ABS solvent cement

Effectively prepare your plastic pipe and fitting surfaces for solvent cement bonding with Weld-On PC-64 PVC/CPVC Primer-Conditioner. Suitable for use with all types, classes, and schedules of PVC and CPVC pipes and fittings, this solvent primer and conditioner features a dual-action formula to ensure proper pipe welding. The primer-conditioner acts as a cleanser, effectively removing grease, oil, and dirt from the bonding surfaces, and it also penetrates and softens the joining surfaces, helping to promote maximum fusion during welding. Follow with the solvent cement of your choice to achieve a strong, high-contact, and long-lasting joint. A preferred choice of contractors worldwide, Weld-On solvent cements and primers are recognized globally for their industry-leading strength and ease-of-use. Commonly referred to as PVC glue, PVC solvent cement fuses pipes and fittings at the molecular level for a durable, high-contact, and long-lasting joint. Choose from a wide selection of Weld-On solvent cements to find the product that is perfect for your application.

• Non-bodied solvent conditioner prepares pipes and fittings by removing oil, grease, and dirt
• Fast-acting purple primer pre-softens surfaces to ensure proper PVC/CPVC welding--an essential first step before application of solvent cement
• Compatible with all classes and schedules of PVC and CPVC
• Not for use with potable water systems or applications where codes are involved
• Low-VOC content minimizes environmental impact and helps improve crew working conditions
• Pint

Oatey Great Blue Pipe Joint Compound is a non-separating thread sealant formulated to seal threaded connections on metal and plastic pipe up to and including 2 in. in diameter. Its uniform, smooth consistency allows for easy application on lines carrying water, natural gas (except oxygen), steam, air lines, caustics and dilute acids. Oatey products have earned the trust of plumbing professionals for over 100 years.

• 8 oz. pipe joint compound
• Seals and lubricates metal or plastic threaded joints
• Uniform, smooth consistency for easy application
• Compatible with PVC, CPVC, ABS, polyethylene, polypropylene, iron, steel, copper or brass threads up to and including 2 in. diameter
• For use on lines carrying water, natural gas (except oxygen), steam, air lines, caustics and dilute acids
• Flexible, non-hardening and non-toxic
• Withstands up 10,000 PSI on liquids from -50° to 500°F and up to 3,000 PSI on gases from -50° to 400°F
• Low odor, easy clean-up
• Certified to NSF, IAPMO and CSA

Ensure the strongest bond possible between pipes and fittings by preparing your surfaces with Weld-On C-65 PVC/CPVC/ABS/Styrene Cleaner. This pipe cleaner effectively removes oil, grease and dirt from the surfaces of all sizes, classes and schedules of PVC, CPVC, ABS and styrene. Use an applicator to apply and scrub the water-thin solvent cleaner onto pipes and fittings before continuing with the appropriate Weld-On primer and solvent cement. Weld-On C-65 may be used on FlowGuard Gold pipes and fittings and may also be used as a brush cleaner. A preferred choice of contractors worldwide, Weld-On solvent cements, cleaners and primers are recognized globally for their industry-leading strength and ease-of-use. Commonly referred to as PVC glue, PVC solvent cement fuses pipes and fittings at the molecular level for a durable, high-contact and long-lasting joint. Choose from a wide selection of Weld-On solvent cements to find the product that is perfect for your application.

• Low-voc cleaner for removal of oil and grease from the surfaces of PVC, cPVC, ABS and styrene pipe and fittings
• Designed for use before the application of Weld-On pipe primers and solvent cements
• Can be used on all sizes, classes and schedules of PVC, cPVC, ABS and styrene
• Low-voc content minimizes environmental impact and helps improve crew working conditions
• May be used on flowguard gold pipes and fittings may also be used as a brush cleaner
• Weld on c-65

Oatey PVC Medium Bodied Fast Set Clear Cement is recommended for DWV, pressure pipe, potable water and electrical applications. Its medium body has excellent gap filling properties and is easy to apply with included in-lid dauber. This clear, fast set cement can be used to solvent weld all schedules and classes of PVC pipe and fittings up to 6 in. diameter with interference fit. Oatey products have earned the trust of plumbing professionals for over 100 years.

• Clear cement solvent welds PVC pipe and fittings, dauber included
• For DWV, pressure pipe, potable water and electrical applications
• Easy-to-apply medium body has excellent gap filling properties
• Can be used on all schedules and classes of PVC pipe and fittings up to 6 in. diameter with interference fit
• Recommended application temperature of 40°F to 110°F / 4°C to 43°C
• All Oatey solvent cement and primer products are certified to UL Greenguard Gold
• Meets ASTM Standard D2564 and complies with NSF/ANSI 61 health effects requirements
• Please refer to the Oatey Limited Warranty for warranty details

Christy's Red Hot Blue Glue 8 fl. oz. PVC Pipe Cement is ideal for situations needing quick or immediate pressurization. It gap-filling capabilities make it a good choice for working in most types of weather conditions to seal pressure and non-pressure, potable and non-potable PVC pipes. Size of 8 fl. oz.

• PVC solvent cement that works in most of weather conditions, wet or dry
• Fast, quick set that is ideal for situations requiring quick or immediate pressurization
• Medium-bodied formulation that provides excellent gap-filling capability and a bond for life
• Low VOC formulation that is environmentally friendly
• For use on pressure and non-pressure, potable and non-potable PVC pipe through 6 in., interference fit
• Can has applicator in lid for ease of use
• Meets ASTM D-2564 standards and is NSF 14/61 listed
• Blue in color to show quantity applied
• NSF and IAPMO listed for PW, DWV and SW

Hercules Megatape is a heavy-duty, pro-grade thread-sealing tape that's built to apply, look and perform better than traditional thread tape. At 3.5 mils thick, Megatape won't trip or tear and requires fewer wraps, giving you the confidence of a strong, secure seal without the hassle. This all-purpose PTFE tape seals threads on virtually any piping system, including stainless steel pipe, cast iron, PVC, CPVC and ABS pipe, brass and chrome fittings, and has connections. Megatape offers improved aesthetics compared to colored tapes; its gray color makes it ideal for use with stainless steel or chrome pipe. Behold the power of Hercules, products built to last and trusted by plumbers to withstand even the toughest conditions.

• 1/2 in. x 260 in. thread seal tape
• 3.5 mils thickness resists tearing and ripping
• PTFE construction ensures longevity
• Seals threads on virtually any piping system, including stainless steel pipe, cast iron, PVC, CPVC and ABS pipe, brass and chrome fittings, and gas connections
• Gray color provides an aesthetically clean look when used with chrome or stainless steel pipe
• cUL-listed to take on strenuous applications
• Chemically inert