Special Compound For Lp and Natural Gas. Soft and Slow Drying. Meets CSA Tolerances -50 degree F - +400 degree F. 200 psi Liquid To 1200 psi.

• Special compound for LP and natural gas
• Soft and slow drying
• Never seizes
• Allows easy assembly
• Non-toxic
• Cream colored

Thixotropic Non-Drip Paste For Pipe Joint Threads. On Lines Carrying Water. Never Hardens, Joints Separate Easily, No Lead.

• No drip paste for pipe joint threads
• On lines carrying water
• Never hardens
• Joints separate easily
• No lead
• Limited warranty

Oatey Pink Water Line Thread Seal Tape is a high-density PTFE sealing tape. Provides a fast, positive seal for water lines, sewage lines and sprinkler systems. Oatey products have earned the trust of plumbing professionals for over 100 years.

• 1/2 in. x 260 in. pink thread seal tape
• Designed for use on metal or plastic threaded piping up to 1-1/2 in. diameter
• Can be used with piping in air, water, sewage, hydraulic lines and sprinkler systems
• Made with PTFE construction for longevity
• 3 mils thick, 1.20-1.50 grams/cubic centimeter density
• Complies with MIL-T-27730A

Oatey Clear Cleaner is a fast-acting cleaner that removes surface dirt, grease and grime. It is formulated for all schedules and diameters of ABS, PVC and CPVC pipe and fittings. It's clear finish flows freely, evaporates quickly, will not stain most surfaces and applies easily with included in-lid dauber. Oatey products have earned the trust of plumbing professionals for over 100 years.

• Easy to apply with included in-lid dauber
• Fast-acting cleaner for ABS, PVC and CPVC pipe and fittings
• Removes surface dirt, oils and other contaminants from piping
• Clear in color, will not stain most surfaces
• Formulated for all schedules and diameters of ABS, PVC and CPVC pipe and fittings
• Clear finish flows freely and evaporates quickly
• All Oatey solvent cement and primer products are certified to UL Greenguard Gold
• Low VOC cleaner that meets California South Coast Air Quality Management Districts (SCAQMD) 1168/316A or BAAQMD Method 40 requirements, and complies with NSF/ANSI 61 health effects requirements

Easily and effectively seal and lubricate threaded pipe joints with the Weld-On Pipe Stick Joint Compound. This convenient pipe stick thread sealant can be quickly applied to both plastic and metal pipe threads, preventing rust and corrosion and allowing easier disassembly of pipes and fittings. The lead-free, nontoxic formula can be used on potable water systems, as well as steam, oil, butane, and propane lines with pressures up to 10,000 PSI and temperatures up to 750 degrees Fahrenheit.

• Thread sealant for metal and plastic pipe
• Convenient stick design for easy application
• Prevents rust and corrosion of the pipe threading, allowing for easier disassembly
• Lead-free, non-toxic formula
• For use on water, steam, oil, butane, and propane lines
• For pipe, metal and plastic

Weld On Cap Dauber. DQ-150 Cap Dauber 1 in. for up to 3 in. Pipe Diameter. Replacement For Lost Or Hardened Daubers. Natural Material.

• 1 1/2" Cap Dauber
• Dauber is conveniently attached to the bottom of the screw cap for application of primer and cement
• Cap creates a tight seal, preventing primers and solvent cements from drying out
• Practical design ensures you always have an applicator on hand
• Blue handle
• Weld On

All-purpose solvent cement is a multi-purpose product specially formulated with solvents and resins for bonding ABS, PVC or CPVC piping systems. Medium-bodied solvent cement has excellent gap filling properties. Creates a strong bond between plastic pipe and fittings.

• All-purpose solvent cement can be used on ABS, PVC or CPVC piping systems
• Medium bodied all-purpose cement can be used up to 6 in. Dia piping
• All-purpose solvent cement can be used for potable water, pressure pipe and drain, waste and vent piping
• Meets performance requirements of ASTM D-2564, D-2235 and F-493
• Check with local building/plumbing codes for acceptability of all-purpose solvent cement
• Packaged in metal can with dauber stem for easy application

will not Harden, Crack Or Crumble. For Setting Closet Bowls, Sink Strainers. Not For Use On Marble.

• Will not harden, crack or crumble
• Used for setting closet bowls
• Used for setting sink strainers
• Not for use on marble
• Limited warranty
• Stainless

Weld On Cap Dauber. DP-75 Cap Dauber for 3/4 in. up to 1 in. Pipe Diameter. Replacement For Lost Or Hardened Daubers. Natural Material.

• 3/4" Cap Dauber
• Dauber is conveniently attached to the bottom of the screw cap for application of primer and cement
• Cap creates a tight seal, preventing primers and solvent cements from drying out
• Practical design ensures you always have an applicator on hand
• Weld On
• Replacement

Oatey All-Purpose ABS, PVC and CPVC Medium Bodied Clear Cement is recommended for DWV, potable water and irrigation applications. Its medium body has excellent gap filling properties and is easy to apply with included in-lid dauber. This milky-clear, all-purpose cement can be used to solvent weld all schedules and classes of ABS, PVC and CPVC pipe and fittings up to 6 in. diameter with interference fit. Oatey products have earned the trust of plumbing professionals for over 100 years.

• 32 oz. all-purpose solvent cement with dauber
• For DWV, irrigation and potable water applications
• Solvent welds ABS, PVC and CPVC pipe
• Medium viscosity easily fills gaps and provides more working time
• Recommended application temperature of 40°F to 110°F / 4°C to 43°C
• Cement appears off-white in the can but dries clear when applied in a thin film
• All Oatey solvent cement and primer products are certified to UL Greenguard Gold
• Low VOC solvent cement that meets California South Coast Air Quality Management Districts (SCAQMD) 1168/316A or BAAQMD Method 40 requirements
• Meets ASTM Standards D2564, D2235 and F505

Oatey Heavy Duty Gray PVC Cement is formulated for use on all schedules and classes PVC pipe and fitting up to 12" diameter with interference fit, up to 18" for non-pressure.

• Lo-V.O.C. Solvent Cement meets California South Coast Air Quality Management District (SCAQMD) 1168/316A or BAAQMD Method 40 and various environmental requirements
• Thick formula fills gaps in large diameter pipe and loose fitting joints
• Recommended application temperature 40°F to 110°F / 4°C to 43°C
• Meets ASTM D2564

Oatey PVC All Weather Medium Bodied Fast Set Clear Cement is recommended for potable water, drain, waste and vent applications. It is formulated to perform in all weather conditions from -15 degree F to 110 degree F and applies easily with included in-lid dauber. This clear, low VOC, medium bodied, fast set cement can be used to solvent weld all schedules and classes of PVC pipe and fittings up to 6 in. diameter with interference fit. Oatey products have earned the trust of plumbing professionals for over 100 years.

• Medium-bodied clear cement for use on all schedules and classes of PVC pipe and fittings up to 6 in. Dia with interference fit
• Low-VOC solvent cement meets California South Coast Air Quality Management District (SCAQMD) 1168 Amp/316 Amp or BAAQMD method 40 and various environmental requirements
• Recommended application temperature -15 degree F to 110 degree F / -26 degree C to 43 degree C
• Recommended for potable water, drain, waste and vent systems
• No primer needed on non-pressure DWV applications, where local codes permit
• Meets ASTM D-2564

Effectively prepare your plastic pipe and fitting surfaces for solvent cement bonding with Weld-On PC-64 PVC/CPVC Primer-Conditioner. Suitable for use with all types, classes, and schedules of PVC and CPVC pipes and fittings, this solvent primer and conditioner features a dual-action formula to ensure proper pipe welding. The primer-conditioner acts as a cleanser, effectively removing grease, oil, and dirt from the bonding surfaces, and it also penetrates and softens the joining surfaces, helping to promote maximum fusion during welding. Follow with the solvent cement of your choice to achieve a strong, high-contact, and long-lasting joint. A preferred choice of contractors worldwide, Weld-On solvent cements and primers are recognized globally for their industry-leading strength and ease-of-use. Commonly referred to as PVC glue, PVC solvent cement fuses pipes and fittings at the molecular level for a durable, high-contact, and long-lasting joint. Choose from a wide selection of Weld-On solvent cements to find the product that is perfect for your application.

• Weld-On 10875 PC-64 Purple PVC/CPVC Primer-Conditioner, Low-VOC, 1/4 pint Can with Applicator Cap, Metal Can
• Fast-acting purple primer pre-softens surfaces to ensure proper PVC/CPVC welding--an essential first step before application of solvent cement
• Compatible with all classes and schedules of PVC and CPVC
• Not for use with potable water systems or applications where codes are involved
• Low-VOC content minimizes environmental impact and helps improve crew working conditions
• Purple primer/cleaner

Oatey PVC Rain-R-Shine Medium Bodied Fast Set Blue Cement is recommended for pool and spa, irrigation, potable water, pressure pipe and DWV applications. It is formulated for wet conditions and quick pressurization, and is easy to apply with included in-lid dauber. This blue, medium bodied, fast set cement can be used to solvent weld all schedules and classes of PVC pipe and fittings up to 6 in. diameter with interference fit. Oatey products have earned the trust of plumbing professionals for over 100 years.

• Rain-R-Shine blue cement solvent welds PVC, dauber included
• Hot cement designed for wet conditions
• Very fast setting for quick pressurization and quick installation
• Can be used on PVC pipe and fittings up to 6 in. diameter with interference fit
• For pool and spa, irrigation, potable water, pressure pipe and DWV applications
• Recommended application temperature of 40°F to 110°F / 4°C to 43°C
• All Oatey solvent cement and primer products are certified to UL Greenguard Gold
• Meets ASTM Standard D2564 and complies with NSF/ANSI 61 health effects requirements
• Please refer to the Oatey Limited Warranty for warranty details

Oatey White PTFE Thread Seal Tape provides a clean, positive seal on threaded connections. Made of durable PTFE, this white-colored thread sealing tape resists tearing and stretching for easy, efficient application. Oatey products have earned the trust of plumbing professionals for over 100 years.

• 1/2 in. x 520 in. white thread seal tape
• Provides a clean, positive seal on threaded connections
• Resists tearing and stretching for easy, efficient application
• Made with PTFE construction for longevity
• Can be used on plastic, brass, copper, aluminum, galvanized steel or black iron piping
• 3 mils thick, 07 grams/cubic centimeter density
• Complies with Military Spec No A-A-58092 & UL 31 RO

GASOILA Soft-Set Thread Sealant will provide the right thread sealant for the task at hand. This pint of soft-set thread sealant features a non-toxic PTFE paste that will ensure a positive seal is in place. This pipe sealant can be used on several different surfaces such as brass, copper, stainless steel, aluminum, tin, galvanized, CPVC, PVC plastics, nylon, polyethylene, polypropylene and more. Our soft-set thread is pliable for applications in even the most extreme of conditions while withstanding high pressure ratings for both liquids and gases. Product is not intended for use with oxygen.

• Soft setting, non-toxic PTFE paste
• Use on threaded brass, copper, stainless steel, aluminum, black pipe, tin, polyethylene, polypropylene, polybutylene, ABS, PVC nylon and galvanized pipe threads, hoses and more diesel oil, propane, butane LPG, cutting oils, ammonia, aliphatic solvents, acids, steam, potable water, compressed air and more
• Remains pliable in cold temperatures, working range is -100 degree F - 600 degree F
• Pressure range is 10,000 psi when sealing liquids and 3,000 psi when sealing gases
• Used by mechanical contractors, plumbers, gas utilities, service station installers, manufacturing plants, etc.
• Use on all metals and most plastics

Ensure the strongest bond possible between pipes and fittings by preparing your surfaces with Weld-On C-65 PVC/CPVC/ABS/Styrene Cleaner. This pipe cleaner effectively removes oil, grease, and dirt from the surfaces of all sizes, classes, and schedules of PVC, CPVC, ABS, and styrene. Use an applicator to apply and scrub the water-thin solvent cleaner onto pipes and fittings before continuing with the appropriate Weld-On primer and solvent cement. Weld-On C-65 may be used on FlowGuard Gold pipes and fittings and may also be used as a brush cleaner. A preferred choice of contractors worldwide, Weld-On solvent cements, cleaners, and primers are recognized globally for their industry-leading strength and ease-of-use. Commonly referred to as PVC glue, PVC solvent cement fuses pipes and fittings at the molecular level for a durable, high-contact, and long-lasting joint. Choose from a wide selection of Weld-On solvent cements to find the product that is perfect for your application.

• Low-VOC cleaner for removal of oil and grease from the surfaces of PVC, CPVC, ABS and STYRENE pipe and fittings
• Designed for use before the application of Weld-On pipe primers and solvent cements
• Can be used on all sizes, classes, and schedules of PVC, CPVC, ABS, and styrene
• Low-VOC content minimizes environmental impact and helps improve crew working conditions
• May be used on FlowGuard Gold pipes and fittings; may also be used as a brush cleaner
• Must be used only as a cleaner

The Oatey 16 oz. Purple Primer is formulated from a mixture of solvents and is designed to remove contaminants such as dirt and oils from the surface of PVC and CPVC pipe and fittings. Includes an in-lid applicator.

• Purple-tinted aggressive primer for use on PVC and CPVC pipe and fittings
• Low-V.O.C. solvent cement meets California south coast air quality management district (SCAQMD) 1168/316A or BAAQMD method 40 and various environmental requirements
• Removes surface dirt, grease and grime as well as softens the pipe surface to allow a fast, secure solvent weld
• For use in areas where plumbing code calls for verification that a primer has been used
• NSF listed
• Meets ASTM F-656

The Oatey 4 oz. Purple Primer is formulated from a mixture of solvents. Designed to remove dirt, oils and other contaminants from the surface of PVC or CPVC piping. Low volatile organic compound (VOC).

• Pre-softens PVC and CPVC pipe and fitting surfaces
• Can be used on any diameter of PVC or CPVC piping
• Do not use on ABS pipe installations
• Meets ASTM F-656
• Removes surface dirt, grease and grime as well as softens the pipe surface to allow a fast, secure solvent weld
• For use in areas where plumbing code calls for verification that a primer has been used

Contains A High Grade Mineral Oil and A Proper Balance Of Lard Oil, Sulfur, Chlorine and A Wetting Agent. For Hand Threading Applications and Iron, Steel, Stainless Steel and Other Metal Material. Formulated with active sulfur.

• Contains a high grade mineral oil
• Contains the proper balance of oil, sulfur, chlorine and wetting agent
• For use in hand threading applications
• High film strength
• Contains a high grade mineral oil and a proper balance of lard oil, sulfur, chlorine and a wetting agent for hand threading applications and iron, steel, stainless steel also for us in other metal material
• Limited warranty

Oatey PVC All Weather Medium Bodied Fast Set Clear Cement is recommended for potable water, drain, waste and vent applications. It is formulated to perform in all weather conditions from -15 degree F to 110 degree F and applies easily with included in-lid dauber. This clear, low VOC, medium bodied, fast set cement can be used to solvent weld all schedules and classes of PVC pipe and fittings up to 6 in. diameter with interference fit. Oatey products have earned the trust of plumbing professionals for over 100 years.

• All weather clear cement solvent welds PVC, dauber included
• For potable water, drain, waste and vent applications
• For all schedules and weather conditions, including the very cold
• Can be used on all schedules and classes of PVC pipe and fittings up to 6 in. diameter with interference fit
• Recommended application temperature of -15 degree F to 110 degree F / -26 degree C to 43 degree C
• No primer needed on non-pressure DWV, where local codes permit
• All Oatey solvent cement and primer products are certified to UL Greenguard Gold

Contains A High Grade Mineral Oil and A Proper Balance Of Lard Oil, Sulfur, Chlorine and A Wetting Agent. For Hand Threading Applications and Iron, Steel, Stainless Steel. Also for us in other Metal Material.

• Contains a high grade mineral oil
• Contains the proper balance of oil, sulfur, chlorine and wetting agent
• For use in hand threading applications
• High film strength
• For lubricating and cooling dies and cutting machines
• Gallon size

The Oatey 32 oz. PVC Primer and Cleaner is formulated from a mixture of solvents and is designed to remove dirt, oils and other contaminants from the surface of PVC and CPVC piping. Clear primer will not stain most surfaces. Includes in-lid applicator.

• Clear aggressive primer for use on PVC and CPVC pipe and fittings
• Lo-V.O.C. solvent cement meets California South Coast Air Quality Management District (SCAQMD) 1168/316A or BAAQMD method 40 and various environmental requirements
• Removes surface dirt, grease and grime as well as softens the pipe surface to allow a fast, secure solvent weld
• NSF listed
• Meets ASTM F656
• 32 oz. resealable can

Won't Harden, Crack Or Crumble. For Setting Closet Bowls, Sink Strainers. Not For Use On Marble.

• Will not support bacteria
• Easily workable, soft, pliable material
• Do not use on marble, synthetic marble, other porous surfaces or on plastic lavatories and fixtures
• Meets federal specification TT-P-1536A
• 5 lb. size
• Will not harden, crack or crumble