The 3/4" BFP-9CH Hose Connection Vacuum Breaker with chrome finish is utilized in low health hazard applications such as service sinks, laundry tubs, and standard 3/4" hose bibbs for protection against backsiphonage of polluted water into the potable water supply. The BFP-9 includes a breakaway set screw to eliminate unauthorized removal, and features a maximum working water pressure of 125 psi and a maximum working water temperature of 180 degree F. Designed for hose bibb attachment, BFP-9 materials include a brass valve body, buna nitrile elastomers, acetal polymers, and stainless steel internals, with an optional chrome finish.

• Ideal for 3/4" hose bibb, sink, and laundry tub applications for versatile installation
• Backsiphonage is prevented in an economically sound way for low lifetime costs
• Includes breakaway screw for unauthorized removal prevention
• Stainless steel internals resist corrosion
• ASSE Listed 1011
• IAPMO Listed
• CSA Certified B64.2 (BFP-8F)
• UPC Certified B64.2 (BFP-9)

The TP1100A-4C-150C Temperature and Pressure Relief Valve has a 3-3/32 in. probe and is set at 150 psi, and is utilized on water heating storage vessels for protection against over-temperature or excessive pressure, primarily on water heaters in residential applications. The copper thermal element is epoxy-coated for added theft protection. TP1100A materials include cast brass or bronze for the main valve body, stainless steel internals and springs, and epoxy-coated copper tube probes.

• Commonly used on residential water heaters
• Protection from excessive pressure reduces risk of damage in residential applications
• Thermal element protected with epoxy coating
• CSA Compliance to ANSI Z21.22/CSA 4.4
• Certified to ASME Section IV by National Board
• Easy to Install
• Water conserving
• Maximum water savings
• 1.1 GPF
• AquaVantage flush valve

Intermediate atmospheric vent, for laboratory equipment, processing tanks, sterilizers and dairy equipment. Can be used on hot or cold lines under continuous pressure. Brass body, stainless steel parts, integral strainer, can be installed horizontally or vertically, Maximum pressure 175 psi.

• Forged brass body for durability
• Compact design
• Stainless steel internal parts
• Horizontal or vertical installation

Intermediate atmospheric vent For laboratory equipment, processing tanks, sterilizers and dairy equipment. Can be used on hot or cold lines under continuous pressure. Brass body, stainless steel parts, integral strainer Can be installed horizontally or vertically Max. pressure 175 psi Maximum emergency backflow temperature 250 degree F.

• Compact design
• Stainless steel internal parts
• Horizontal or vertical installation
• Forged brass body for durability
• Max. emergency backflow temperature 250 degree F
• Maximum pressure 175 psi

This 1/2 in. anti-siphon vacuum breaker hot or cold water repair kit prevents the reverse flow of polluted water from entering into the potable water supply due to back siphonage. It consists of a disk and disc float, a bonnet and O-ring. It has a full size orifice to assure pipe size capacity and maximum flow. It is ideal for low flow, non-continuous hot or cold water health hazard installations such as on laboratory equipment. Maximum Pressure is 125 psi (8.6 bar).

• Consists of a disk and disc float, a bonnet and O-ring
• No special tools required for changing parts
• All parts are made of high quality materials
• Hot or cold water use
• Maximum pressure is 125 psi
• Factory replacement kit

This 1/4-3/8 in. anti-siphon vacuum breaker hot or cold water repair kit prevents the reverse flow of polluted water from entering into the potable water supply due to back siphonage. It consists of a disk and disc float, a bonnet and O-ring. It has a full size orifice to assure pipe size capacity and maximum flow. It is ideal for low flow, non-continuous hot or cold water health hazard installations such as on laboratory equipment. Maximum Pressure is 125psi (8.6 bar).

• Factory replacement kit
• No special tools required for changing parts
• All parts are made of high quality materials
• Hot or cold water
• Ideal for low flow hot or cold water
• Max. pressure 125psi