The Everbilt Lead Free Ball Valve with Drain is constructed of heavy forged brass and has a lever handle with Female connections on both ends. Designed for residential and commercial use on water air, steam, oil or gas. Full port for maximum flow and minimum pressure drops. This multi-purpose manual lever ball valve has excellent corrosion resistance and is fit for many applications.

• Extremely low return rate
• Forged brass construction
• Lead free design is suitable for all potable water supply installations
• Easy quarter-turn operation
• Suitable for oil, water and gas
• Side tap allows non-pressure side to be drained when valve is in the closed position
• Threaded connections

SharkBite Push-to-connect ball valve is the easiest way to install a new or replacement shut-off ball valve. The single lever quarter-turn control allows for easy operation and the valve is perfect for potable water and hydronic applications where a shut-off is needed. No soldering, clamps, unions, glue, or special tools are required. Simply insert the pipe and the teeth bite down and grip tight, while a specially formulated O-ring compresses to create a watertight seal. Changes can easily be made by rotating the valve after installation. Removing the valve is just as fast using a disconnect tool so the valve can be easily changed or reused. Designed with stainless steel gripping teeth for a secure connection, a chlorine-resistant O-ring for a long-lasting seal, and backed by a 25-year warranty.

• Compatible with PEX, copper, CPVC, PE-RT, and HDPE pipe
• Push-to-connect fittings are ideal for installation in tight spaces
• Rated to 200 degrees Fahrenheit and 200 PSI
• Approved for underground and behind-the-wall applications with no access panels (wrapping required when burying underground)
• Can be installed on wet or dry lines and pressure tested immediately, no waiting on soldered joints to cool or solvents to dry
• Low-lead DZR corrosion-resistant brass body
• Code approved, IAPMO listed, for details see Specifications
• 25-Year warranty when used with PEX, copper, CPVC & PE-RT pipe
• 5-Year warranty when used with SDR-9 HDPE pipe
• Meets all UPC, IPC, and cUPC requirements
• Demount clip allows user to release the fitting from the pipe for convenient installation flexibility (sold separately)
• Rated to 200 degree F and 200 psi
• 3/4 in. pipe insertion depth - 1-1/8 in.

The 1/2-inch barb x 1/2-inch barb brass fitting provides contractors with speedy installation and cost savings that is perfect for commercial or residential applications. The versatile construction can be uses to either isolate a fixture or main line for easy maintenance and repairs. The lead-free eco-brass construction delivers dependability and peace of mind for building owners. High-temp and freeze-resistant materials allows for adaptation to hot and cold water applications for PEX systems.

• High-temp and freeze-resistant materials adapt to both hot and cold water applications for PEX systems
• This versatile brass valve can be used to either isolate a fixture or main line for easy maintenance and repairs
• Cooper construction holds up to years of use and ensures sanitation
• Pressure ratings of up to 80 PSI at 200 degrees Fahrenheit handles the high demand of commercial usage
• NSF 61 certified
• 25-year warranty proven to last the lifetime of the building

The NIBCO lead-free brass ball valve with threaded end connections provides bubble-tight shutoff. The valve's PTFE seats and lead free ball exhibit high corrosion resistance properties. The valve is ideal for hot/cold water and gas applications. The NIBCO lead-free brass ball valve provides ease of operation with quarter-turn (90 degrees) open to close. The two-piece valve features threaded end connections for easy installation.

• Lead free
• Full port
• Blowout-proof stem
• IAPMO listed to NSF/ANSI-61-8, NSF/ANSI-372 and UPC-IGC-157
• CSA ANSI Z21.15 / CSA 9.1
• CSA ASME B16.44: 5 psig (maximum)
• CSA ASME B16.33: 125 psig (maximum)
• CSA CAN / CGA 3.16
• CSA CGA CR91-002: 1/2 psig, 2 psig and 5 psig
• FM 1140 approved 175 wwp
• UL 1477 (YQNZ): compressed gas shutoff valves 250 psi
• UL 842 (YRPV): gas shutoff valves 250 psi
• UL 842 (YRBX): flammable liquid shut off valves 250 psi
• UL 842 (MHKZ): manual valves 250 psi
• UL 125 (YSDT): LP-gas shutoff valves 250 psi
• UL subject 258 (VQGU): trim and drain valves
• Valve pressure rating 600 psi/41.4 bar non-shock cold working pressure

SharkBite Push-to-connect ball valve is the easiest way to install a new or replacement shut-off ball valve. The single lever quarter-turn control allows for easy operation and the valve is perfect for potable water and hydronic applications where a shut-off is needed. No soldering, clamps, unions, glue, or special tools are required. Simply insert the pipe and the teeth bite down and grip tight, while a specially formulated O-ring compresses to create a watertight seal. Changes can easily be made by rotating the valve after installation. Removing the valve is just as fast using a disconnect tool so the valve can be easily changed or reused. Designed with stainless steel gripping teeth for a secure connection, a chlorine-resistant O-ring for a long-lasting seal, and backed by a 25-year warranty.

• Compatible with PEX, copper, CPVC, PE-RT, and HDPE pipe
• Push-to-connect fittings are ideal for installation in tight spaces
• Rated to 200 degrees Fahrenheit and 200 PSI
• Approved for underground and behind-the-wall applications with no access panels (wrapping required when burying underground)
• Can be installed on wet or dry lines and pressure tested immediately, no waiting on soldered joints to cool or solvents to dry
• Low-lead DZR corrosion-resistant brass body
• Code approved, IAPMO listed, for details see Specifications
• 25-Year warranty when used with PEX, copper, CPVC & PE-RT pipe
• 5-Year warranty when used with SDR-9 HDPE pipe
• Meets all UPC, IPC, and cUPC requirements
• Demount clip allows user to release the fitting from the pipe for convenient installation flexibility (sold separately)
• Rated to 200 degree F and 200 psi
• 1/2 in. pipe insertion depth - 15/16 in.

The 3/4 in. barb x 3/4 in. barb brass fitting provides contractors with speedy installation and cost savings that is perfect for commercial or residential applications. The versatile construction can be uses to either isolate a fixture or main line for easy maintenance and repairs. The lead-free eco-brass construction delivers dependability and peace of mind for building owners. High-temp and freeze-resistant materials allows for adaptation to hot and cold-water applications for PEX systems.

• High-temp and freeze-resistant materials adapt to both hot and cold water applications for PEX systems
• Versatile brass valve can be used to either isolate a fixture or main line for easy maintenance and repairs
• Cooper construction holds up to years of use and ensures sanitation
• Pressure ratings of up to 80 PSI at 200 degree F handles the high demand of commercial usage
• NSF 61 certified
• 25-years warranty proven to last the lifetime of the building