Homewerks Worldwide's spring loaded inline check valves help to prevent backflow and provide pressure relief in irrigation systems. Our high quality design provides durability and reliability through its brass construction, rubber O ring seal, and stainless steel spring. This check valve is optimal in centrifugal, jet, and submersible pump systems.

• Durable brass construction
• Prevents backflow in irrigation systems
• Optimal in centrifugal, jet, and submersible pump systems
• Stainless steel spring
• Resilient rubber O-ring seal
• Maximum pressure 200 psi
• Maximum temperature 180 degree F
• Cracking pressure or minimum pressure to open the valve is 0.863 psi
• FIP x FIP ends

The lead-free Swing Check Valve from Everbilt blocks back pressure that could damage expensive components of a pumping system. Constructed from durable brass, it is designed to automatically allow flow in the forward direction and block back pressure when water flows in the reverse direction. It is suited for horizontal operation and contains threaded ends.

• In-line back flow preventer
• Complies with 0.25% weighted average lead content on wetted surfaces
• For horizontal installation
• Threaded ends
• Automatic operation
• Durable brass body

The Homewerks Worldwide Lead Free Brass Swing Check Valves keeps water from backing up into a municipal water supply and prevents backflow from wells and boiler systems. They have a screwed cap, swing type disc and integral seat. Brass design provides durability. Recommended for residential and commercial applications.

• In-line back flow preventer
• Complies with 0.25% weighted average lead content on wetted surfaces
• For horizontal or vertical installation
• Threaded ends
• Durable brass construction
• Maximum pressure 200 psi

Prevent backflow with the 3/4 in. ProPress Check Valve. Press connections make installing this check valve quick and efficient. Unlike traditional pipe fittings, there's no need for calibration, flame or heavy equipment. Instead, Viega ProPress check valves install in just 4 easy steps: cut the copper tube to length, remove any burrs and surface imperfections, measure and mark the fitting insertion depth, and use a press tool to connect the Viega ProPress check valve for a secure connection. Smart Connect technology identifies unpressed connections during pressure testing to ensure proper connections the first time and eliminate callbacks. Approved to the most codes and standards of any other press fitting system (IPC, UPC and NSF included), and with more than 400 different fitting configurations to suit virtually any type of plumbing or HVAC job, Viega ProPress check valves are the top choice of professionals around the globe.

• Designed for use with 1/2 in. ASTM B88 and B75 tubing, not compatible with PEX
• Compatible systems include potable water, hydronics and more
• Installs in 7 seconds or less with a press tool - no flame, solder or flux required
• Viega smart connect technology helps installers identify unpressed fittings
• Press technology eliminates the need for burn permits or fire watch
• Wet or dry connections allow quick repairs on existing systems
• Durable internal EPDM rubber seals for watertight connections
• Rated for 0-250ºF, up to 300 PSI for water applications
• Zero lead solution certified under NSF-61-371
• Reliability guaranteed by 50-year limited warranty
• Zero lead solution certified under NSF-61-372
• Reliability guaranteed by 2-year limited warranty

The product is high quality and reliability and durability. The product is ease to use and attractive styling. The product is wide selection of product choices and great value.

• High quality
• Reliability
• Durability
• Attractive styling
• Wide selection
• Great value

PVC Check Valves are durable, reliable and worry-free. Check valves prevent water from flowing back into the pump with a rubber flapper, helping your sewage system to perform at its best. It contains a durable stainless-steel spring with an O-ring seal. Cannot be used with compressed air.

• Constructed of heavy-duty PVC
• Compatible with PVC schedule, 40 and 80-piping (not included)
• Prevents siphoning of materials back into the main lines
• Not for use with compressed air
• Corrosion resistant
• 1-year limited lifetime warranty

Homewerks Worldwide's spring loaded inline check valves help to prevent backflow and provide pressure relief in irrigation systems. Our high quality design provides durability and reliability through its brass construction, rubber O ring seal, and stainless steel spring. This check valve is optimal in centrifugal, jet, and submersible pump systems.

• Durable brass construction
• Prevents backflow in irrigation systems
• Optimal in centrifugal, jet, and submersible pump systems
• Stainless steel spring
• Resilient rubber O-ring seal
• Maximum pressure 200 psi
• Maximum temperature 180 degree F
• Cracking pressure or minimum pressure to open the valve is 1.403 psi
• FIP x FIP ends

PVC Check Valves are durable, reliable and worry-free. Check valves prevent water from flowing back into the pump with a rubber flapper, helping your sewage system to perform at its best. It contains a durable stainless-steel spring with an O-ring seal. Cannot be used with compressed air.

• Constructed of heavy-duty PVC
• Compatible with PVC schedule, 40 and 80-piping (not included)
• Prevents siphoning of materials back into the main lines
• Not for use with compressed air
• Corrosion resistant
• 1-year limited lifetime warranty

The 3/4 in. Tectite by Apollo Push-to-Connect check valve is the most economical method of preventing backflow in piping systems. Can be installed vertically or horizontally. Removable with the use of Demount Clip.

• Constructed of lead free dezincification resistant (DZR) brass for superior reliability and strength
• May be installed vertically or horizontally
• Stainless steel spring design provides reliable performance
• Push-to-connect design allows for a simple and fast installation on any combination of copper, PEX, CPVC or PE-RT pipe
• Fittings can be rotated after being installed for ease of use in tight spaces
• Ideal for potable water and hydronic heating applications
• Listed by IAPMO and listed to ASSE 1061/NSF 61
• Meets UPC, IPC, and cUPC standard requirements
• Demount clip allows for fitting removal (sold separately)
• Approved for behind-the-wall with no access and burial
• Corrosion resistant for greater longevity
• Maximum working pressure of 200 psi and maximum temperature of 250 degree F

For sump pump applications the THD1020 can be used with any 1.25 in. or 1.5 in. sump pump. The THD1020 features 1.25 in. or 1.5 in. combination rubber adapters and the industry's most durable check valve flapper. This is the world's most reliable sump pump check valve.

• Can be used with any 1.25 in. or 1.5 in. discharge sump pump
• 1.25 in. or 1.5 in. combination adapters
• Fits 1.25 in. or 1.5 in. black, galvanized and DWV Sch. 40 pipe
• Industries most durable flapper
• All stainless steel clamps
• Strong, durable ABS body
• Millions in service

SharkBite 3/4 in. Push-to-Connect Brass Check Valve is the fastest way to connect PEX, Copper, CPVC, PE-RT, or HDPE pipe in any combination. No soldering, clamps, unions, glue, or special tools required. Simply insert the pipe and the teeth bite down and grip tight, while a specially formulated O-ring compresses to create a watertight seal. Changes can easily be made by rotating the fitting after installation. Removing the fitting is just as fast using a disconnect tool so fittings and valves can be easily changed or reused. Designed with stainless steel gripping teeth for a secure connection, chlorine-resistant O-ring for a long-lasting seal and backed by a 25-year warranty.

• Push-to-Connect fittings are ideal for installation in tight spaces
• Rated to 200 degree F and 200 PSI
• Approved for underground and behind-the-wall applications with no access panels (wrapping required when burying underground)
• Can be installed on wet or dry lines and pressure tested immediately, no waiting on soldered joints to cool or solvents to dry
• Low-lead DZR corrosion resistant brass body
• Code approved, IAPMO listed, for details see Specifications
• 25-Year Warranty when used with PEX, copper, CPVC & PE-RT Pipe
• 5-Year Warranty when used with SDR-9 HDPE Pipe
• Listed by IAPMO and design certified and listed to ASSE 1061/NSF 61
• Meets all UPC, IPCand cUPC requirements
• Demount clip allows user to release the fitting from the pipe for convenient installation flexibility (sold separately)
• 3/4 in. Pipe Insertion Depth = 1-1/8 in.

The Homewerks Worldwide Lead Free Brass Swing Check Valves keeps water from backing up into a municipal water supply and prevents backflow from wells and boiler systems. They have a screwed cap, swing type disc and integral seat. Brass design provides durability. Recommended for residential and commercial applications.

• In-line back flow preventer
• Complies with 0.25% weighted average lead content on wetted surfaces
• For horizontal or vertical installation
• Threaded ends
• For residential and commercial applications
• Durable brass body

Everbilt Lead Free Brass Swing Check Valves are designed for piping systems that contain expensive components that need to be protected at all costs, such as pumping systems. Swing check valves are used to block back pressure that could damage these systems. Designed from brass, these swing check valves are built to automatically allow flow in the forward direction and block back pressure when water flows in the reverse direction. When the fluid flows in the direction indicated on the valve body, the flap opens on the hinge to allow water to pass through. When the flow stops, the weight of the flap automatically closes and prevents backflow.

• In-line back flow preventer
• Complies with 0.25% weighted average lead content on wetted surfaces
• For horizontal installation
• Automatic operation
• Sweat x sweat connections
• Durable brass body

The lead-free Swing Check Valve from Everbilt blocks back pressure that could damage expensive components of a pumping system. Constructed from durable brass, it is designed to automatically allow flow in the forward direction and block back pressure when water flows in the reverse direction. It is suited for horizontal operation and contains threaded ends.

• In-line back flow preventer
• Complies with 0.25% weighted average lead content on wetted surfaces
• For horizontal installation
• Automatic operation
• Durable brass construction
• Sweat x sweat connections

Homewerks Worldwide's spring loaded inline check valves help to prevent backflow and provide pressure relief in irrigation systems. Our high quality design provides durability and reliability through its brass construction, rubber O ring seal, and stainless steel spring. This check valve is optimal in centrifugal, jet, and submersible pump systems.

• Durable brass construction
• Prevents backflow in irrigation systems
• Optimal in centrifugal, jet, and submersible pump systems
• Stainless steel spring
• Resilient rubber O-ring seal
• Maximum pressure 200 psi
• Maximum temperature 180 degree F
• Cracking pressure or minimum pressure to open the valve is 0.696 psi
• FIP x FIP ends

The Homewerks Worldwide PVC Check Valve is durable, reliable and worry-free. Check valves prevent water from flowing back into a pump with a rubber flapper, helping your sewage system to perform at its best. It contains a durable stainless-steel spring with an O-ring seal. Cannot be used with compressed air.

• Constructed of heavy-duty PVC
• Fits both Sch. 40 and 80 pipe
• Prevents siphoning of materials back into the main lines
• Not for use with compresses air
• Corrosion resistant
• Can be used underground

The 1/2 in. Tectite by Apollo Push-to-Connect check valve is the most economical method of preventing backflow in piping systems. Can be installed vertically or horizontally. Removable with the use of Demount Clip.

• Constructed of lead free dezincification resistant (DZR) brass for superior reliability and strength
• May be installed vertically or horizontally
• Stainless steel spring design provides reliable performance
• Push-to-connect design allows for a simple and fast installation on any combination of copper, PEX, CPVC or PE-RT pipe
• Fittings can be rotated after being installed for ease of use in tight spaces
• Ideal for potable water and hydronic heating applications
• Listed by IAPMO and listed to ASSE 1061/NSF 61
• Meets UPC, IPC, and cUPC standard requirements
• Demount clip allows for fitting removal (sold separately)
• Approved for behind-the-wall with no access and burial
• Corrosion resistant for greater longevity
• Maximum working pressure of 200 psi and maximum temperature of 250 degree F

The Homewerks Worldwide Lead Free Brass Swing Check Valves keeps water from backing up into a municipal water supply and prevents backflow from wells and boiler systems. They have a screwed cap, swing type disc and integral seat. Brass design provides durability. Recommended for residential and commercial applications.

• In-line back flow preventer
• Complies with 0.25% weighted average lead content on wetted surfaces
• For horizontal installation
• Threaded ends
• Automatic operation
• Durable brass construction

The Homewerks Worldwide Lead Free Brass Swing Check Valves keeps water from backing up into a municipal water supply and prevents backflow from wells and boiler systems. They have a screwed cap, swing type disc and integral seat. Brass design provides durability. Recommended for residential and commercial applications.

• In-line back flow preventer
• Complies with 0.25% weighted average lead content on wetted surfaces
• For horizontal installation
• Threaded ends
• Automatic operation
• Durable brass construction

Has Chrome Plated Brass Body, 17 Gauge 1-1/4" X 6" Tailpiece, and Chrome Plated Stopper Head With O-Ring Seal. A "Golden Compound" Basin Gasket & Brass Friction Ring Are Also Included. Vertical Lift Rod & Horizontal Ball Joint Rod Are Both Fully Adjustable

• Measures 6 in. H x 1.25 in. W x 6 in. D
• Body made of 17-gauge brass with chrome plating
• Features fully adjustable vertical lift and horizontal ball joint rods
• Comes with golden compound basin gasket and brass friction ring

Heavy brass Tub Wastes are designed to fit standard bath waste shoes. Replace OEM bath wastes, eliminate need to use Pop-Up Levers, Plugs and Rods. Solid brass LIFT & TURN Stoppers are designed for easy use & are vandal-resistant. Polished chrome finish.

• Product-specific design fits standard bath waste shoes
• Lift and turn mechanism allows for convenient use
• Chrome polished to ensure maximum strength
• Vandal-resistant construction for enhanced durability

2 years warranty against defect. Installed in-line to prevent backflow. The valve opens allowing full flow in 1 direction and closes to seal and prevent backflow and maintain prime.

• Withstand temperatures up to 176 degree F
• Pressure up to 150 psi
• Higher flow rate
• Sweat
• Sweat x sweat
• Check

2 years warranty against defect. Installed in-line to prevent backflow. The valve opens allowing full flow in 1 direction and closes to seal and prevent backflow and maintain prime.

• Withstand temperatures up to 176 degree F
• Pressure up to 150 psi
• Higher flow rate
• Threaded
• FIP x FIP
• Check

SharkBite 1/2 in. Push-to-Connect Brass Check Valve is the fastest way to connect PEX, Copper, CPVC, PE-RT, or HDPE pipe in any combination. No soldering, clamps, unions, glue, or special tools required. Simply insert the pipe and the teeth bite down and grip tight, while a specially formulated O-ring compresses to create a watertight seal. Changes can easily be made by rotating the fitting after installation. Removing the fitting is just as fast using a disconnect tool so fittings and valves can be easily changed or reused. Designed with stainless steel gripping teeth for a secure connection, chlorine-resistant O-ring for a long-lasting seal and backed by a 25-year warranty.

• Push-to-Connect fittings are ideal for installation in tight spaces
• Rated to 200 degree F and 200 PSI
• Approved for underground and behind-the-wall applications with no access panels (wrapping required when burying underground)
• Can be installed on wet or dry lines and pressure tested immediately, no waiting on soldered joints to cool or solvents to dry
• Low-lead DZR corrosion resistant brass body
• Code approved, IAPMO listed, for details see Specifications
• 25-Year Warranty when used with PEX, copper, CPVC & PE-RT Pipe
• 5-Year Warranty when used with SDR-9 HDPE Pipe
• Listed by IAPMO and design certified and listed to ASSE 1061/NSF 61
• Meets all UPC, IPCand cUPC requirements
• Demount clip allows user to release the fitting from the pipe for convenient installation flexibility (sold separately)
• 1/2 in Pipe Insertion Depth = 15/16 in.