• Lead free compliant

WARNING FOR CALIFORNIA RESIDENTS: This product contains chemicals known to the State of California to cause cancer and birth defects and other reproductive harm. www.p65warnings.ca.gov Brass ball valve 2-piece Full port Press X Press ends 200 PSIG @ 250 degree .

• Two Piece Full Port Brass Ball Valve
• Press x Press Ends
• 200 psig Non-Shock @ 250 Degrees F
• Blow-out Proof Stem
• For Potable Water Service
• Certified NSF/ANSI 61 and NSF/ANSI 372

This 3/4 in. lead free brass water pressure reducing valve is designed to reduce incoming water pressure to protect plumbing systems and reduce water consumption for commercial, industrial, and residential applications. The easy maintenance assembly consists of a replaceable seat module, NPT threaded female union inlet by NPT female outlet and a bypass feature to control thermal expansion pressure. The temperature range is 33 to 160 degree F (0.5 to 71 degree C). The standard pressure setting is 50 psi (345 kPa) with maximum working pressure at 300 psi (20.7 BAR).

• Bypass feature controls thermal expansion pressure
• Sealed spring cage with stainless steel cage screws
• Integral stainless steel strainer removable for cleaning
• Replaceable seat module
• 3/4 in. NPT threaded female union inlet by NPT female outlet
• Standard pressure setting is 50 psi

The NIBCO lead-free brass ball valve provides ease of operation with quarter-turn (90 degree ) open to close. The 2-piece valve features threaded end connections for easy installation. Please refer to NIBCO technical data sheet, valve selection guide and catalog for engineering and installation information. Choose NIBCO ball valves for the most specified, versatile and economical valve option in commercial and residential applications. NIBCO specialty valves are backed by a NIBCO INC. 2-year limited warranty.

• 3/4 in. Inside Diameter and 0.875 in. Outside Diameter
• Valve pressure rating 600 psi/41.4 bar non-shock cold working pressure (1/4 in. to 2 in.)
• Valve pressure rating 400 psi/27.6 bar non-shock cold working pressure (2-1/2 in. to 4 in.)
• Full port
• Blowout-proof stem
• Threaded end connections
• Standard lever handle
• IAPMO listed to NSF/ANSI-61-8, NSF/ANSI-372 and UPC-IGC-157
• CSA ANSI Z21.15/CSA 9.1 (1/4 in. to 4 in.)
• CSA ASME B16.33: 125 psi (maximum) (1/4 in. to 4 in.)
• CSA CAN/CGA 3.16 (1/4 in. to 4 in. )
• CSA CGA CR91-002: 1/2 psi, 2 psi, and 5 psi (1/4 in. to 4 in.)
• UL 1477 (YQNZ): compressed gas shutoff valves - 250 psi (1/4 in. to 4 in.)
• UL 842 (YRBX): flammable liquid shutoff valves - 250 psi (1/4 in. to 4 in.)
• UL 842 (YRPV): gas shutoff valves - 250 psi (1/4 in. to 4 in.)
• UL 842 (MHKZ): manual valves - 250 psi (1/4 in. to 4 in.)
• UL 125 (YSDT): LP-gas shutoff valves - 250 psi (1/4 in. to 4 in.)

The NIBCO lead-free. brass ball valve provides ease of operation with quarter-turn (90 degree ) open to close. The 2-piece valve features solder end connections for easy installation. Please refer to NIBCO technical data sheet, valve selection guide and catalog for engineering and installation information. Choose NIBCO ball valves for the most specified, versatile and economical valve option in commercial and residential applications. NIBCO specialty valves are backed by a NIBCO INC. 2-year limited warranty.

• 1/2 in. Inside Diameter and 0.625 in. Outside Diameter
• Valve pressure rating 600 psi/41.4 bar non-shock cold working pressure (3/8 in. to 2 in.)
• Valve pressure rating 400 psi/27.6 bar non-shock cold working pressure (2-1/2 in. to 3 in.)
• Full port
• Blowout-proof stem
• Standard lever handle
• Female solder cup end connections
• IAPMO listed to NSF/ANSI-61-8, NSF/ANSI-372 and UPC-IGC-157
• "1/2 I.D. and 0.625 O.D."

WARNING FOR CALIFORNIA RESIDENTS: This product contains chemicals known to the State of California to cause cancer and birth defects and other reproductive harm https://www.p65warnings.ca.gov Brass ball valve 2-piece Full port Press X Press ends 200 PSIG @ 250 degree .

• Two Piece Full Port Brass Ball Valve
• Press x Press Ends
• 200 psig Non-Shock @ 250 Degrees F
• Blow-Out Proof Stem
• For Potable Water Service
• Certified NSF/ANSI 61 and NSF/ANSI 372

This 1/2 in. lead free straight pattern boiler drain shutoff is designed for water service use in commercial and residential hydronic heating systems. It provides positive shutoff for boiler drain or sill cock applications. This shutoff consists of a lead-free body construction and 1/2 in. dual connection for either solder or male IPS and 3/4 in. hose thread connection, Teflon stem packing, and cast iron handwheel. The maximum pressure is 200 psi (14 BAR) WOG and maximum temperature is 180 degree F (82 degree C).

• Lead free construction
• Straight pattern
• Dual inlet connection, male IPS or solder inlet
• Hose thread outlet
• For use in commercial and residential hydronic heating systems
• Max. pressure 200 psi; max. temperature 180 degree F

The NIBCO lead-free* brass ball valve with threaded end connections provides bubble-tight shutoff. The valve's PTFE seats and lead free ball exhibit high corrosion resistance properties. The valve is ideal for hot/cold water and gas applications. The NIBCO lead-free brass ball valve provides ease of operation with quarter-turn (90 degrees) open to close. The two-piece valve features threaded end connections for easy installation. Please refer to NIBCO technical data sheet, valve selection guide and catalog for engineering and installation information. Choose NIBCO ball valves for the most specified, versatile and economical valve option in commercial and residential applications. NIBCO specialty valves are backed by a NIBCO INC. 2-year limited warranty.

• Valve pressure rating 600 psi/41.4 bar non-shock cold working pressure (1/4" to 2")
• Valve pressure rating 400 psi/27.6 bar non-shock cold working pressure (2-1/2" to 4")
• Full port
• Blowout-proof stem
• Threaded end connections
• IAPMO listed to NSF/ANSI-61-8, NSF/ANSI-372 and UPC-IGC-157
• CSA ANSI Z21.15 / CSA 9.1 (1/4" to 4")
• CSA ASME B16.44: 5 psig (maximum) (1/4" to 4") / CSA ASME B16.33: 125 psig (maximum) (1/4" to 4")
• CSA CAN / CGA 3.16 (1/4" to 4")
• CSA CGA CR91-002: 1/2 psig, 2 psig, and 5 psig (1/4" to 4")
• FM 1140 approved 175 wwp
• UL 1477 (YQNZ): Compressed gas shutoff valves 250 psi (1/4" to 4") / UL 842 (YRBX): Flammable liquid shutoff valves 250 psi (1/4" to 4")
• UL 842 (YRPV): Gas shutoff valves 250 psi (1/4" to 4") / UL 842 (MHKZ): Manual valves 250 psi (1/4" to 4")
• UL 125 (YSDT): LP-Gas shutoff valves 250 psi (1/4" to 4")
• UL Subject 258 (VQGU): Trim and drain valves (1/4" to 2")
• Size range 1/4" to 4"

The NIBCO lead-free, brass ball valve with solder end connections provides bubble-tight shutoff. The valve's PTFE seats and lead-free ball exhibit high corrosion resistance properties. The valve is ideal for hot/cold water applications. The NIBCO brass ball valve provides ease of operation with quarter-turn (90 degrees) open to close. The two-piece valve features solder end connections for easy installation.

• 3/4 in. Inside Diameter and 0.875 in. Outside Diameter
• Lead free
• Valve pressure rating 600 psi/41.4 bar non-shock cold working pressure
• Full port
• Blowout-proof stem
• Standard lever handle
• Female solder cup end connections
• IAPMO listed to NSF/ANSI-61-8, NSF/ANSI-372 and UPC-IGC-157

BrassCraft 3/8In. OD Female Compression Inlet x 3/8 In. OD Compression Outlet 1/4-Turn Straight Ball Valve controls water flow to household plumbing fixtures. The straight valve is most often used where the water pipe enters the room from the floor. With a quarter turn of the valve handle, you are able to stop the flow of water leading to the plumbing fixture, allowing for maintenance and repair without shutting off the water to the entire home.

• Machined one-piece brass body provides strength, durability and long-lasting performance
• 3/8 in. Nom Female Comp Inlet x 3/8 in. OD Comp Outlet
• Compatible with copper pipe
• For use in potable water distribution systems and recirculating water systems that produce continuous use temperatures above 115 degree F
• Machined body provides strength, durability and long-lasting performance
• Easy-to-remove handle protects against accidental operation during rough-ins
• Plated stem provides corrosion resistance and prevents o-ring damage. Metal handle is designed for durability, corrosion resistance & a sleek appearance
• 100% leak tested to ensure reliable, leak-free performance
• For indoor use
• Temperature rating: 40 degree to 180 degree F
• Pressure rating: 125 psi maximum
• IAPMO listed to ASME A112.18.1 / CSA B125.1

The NIBCO lead-free brass ball valve with threaded end connections provides bubble-tight shutoff. The valve's PTFE seats and lead free ball exhibit high corrosion resistance properties. The valve is ideal for hot/cold water and gas applications. The NIBCO lead-free brass ball valve provides ease of operation with quarter-turn (90 degrees) open to close. The two-piece valve features threaded end connections for easy installation.

• Lead free
• Valve pressure rating 600 psi/41.4 bar non-shock cold working pressure
• Full port
• Blowout-proof stem
• IAPMO listed to NSF/ANSI-61-8, NSF/ANSI-372 and UPC-IGC-157
• CSA ANSI Z21.15 / CSA 9.1
• CSA ASME B16.44: 5 psig (maximum)
• CSA ASME B16.33: 125 psig (maximum)
• CSA CAN / CGA 3.16
• CSA CGA CR91-002: 1/2 psig, 2 psig and 5 psig (1/4 in. to 4 in. )
• FM 1140 approved 175 wwp
• UL 1477 (YQNZ): compressed gas shutoff valves 250 psi
• UL 842 (YRBX): flammable liquid shut off valves 250 psi
• UL 842 (YRPV): gas shutoff valves 250 psi
• UL subject 258 (VQGU): trim and drain valves

IPS Water-Tite Icemaker Valve Outlet Box With 1/4 Turn Valve, PEX, Lead Free. 1/4 turn chrome valve, Snap-On frame accommodates 1 in. drywall. One piece box and flange design needs no additional support framing labor. Lead free.

• Lead-free compliant (valves feature white handle and check mark stamping)
• Rough opening: 5 in. W x 4 78 in. H x 3 in. D; faceplate dimension 8 in. W x 7 516 in. H
• 1-piece box and flange design needs no additional support framing nor support framing labor
• Snap-on faceplate accommodates up to 1 in. drywall
• Water-Tite
• Lead free
• 1/4 turn
• Snap on frame
• Icemaker box
• Chrome valve

This 3/4 inch lead free straight pattern boiler drain shutoff is designed for water service use in commercial and residential hydronic heating systems. It provides positive shutoff for boiler drain or sill cock applications. This shutoff consists of a lead free body construction and 3/4 inch male IPS and 3/4 inch hose thread connection, Teflon stem packing, and cast iron handwheel. The maximum pressure is 200 psi (14 bar) WOG and maximum temperature is 180 degrees F (82 degrees C).

• Lead free construction
• Straight pattern
• Male IPS inlet
• Hose thread outlet
• For use in commercial and residential hydronic heating systems
• Max. pressure 200 psi; maximum temperature 180 degree F

This 3/4 inch lead free water pressure reducing valve is designed to reduce incoming water pressure to protect plumbing systems and reduce water consumption for commercial, industrial and residential applications. The easy maintenance assembly consists of a lead free cast copper silicon alloy body construction, NPT threaded union inlet and NPT female outlet connection, stainless steel integral strainer, thermoplastic seat module, thermal expansion bypass and a sealed spring cage for waterworks pit installations. The temperature range is 33 to 180 degrees F (0.5 to 82 degrees C). Suitable for up to 400 psi (27.6 bar), the pressure range can be adjusted from 25 to 75 psi (172 to 517 kPa) with the standard setting at 50 psi (345 kPa).

• Serviceable in line
• Integral stainless steel strainer removable for cleaning
• Thermoplastic seat and cage
• Sealed spring cage for accessible outdoor or pit installations
• 3/4 in. NPT threaded union inlet and NPT female outlet connection
• Pressure range can be adjusted from 25 to 75 psi with the standard setting at 50 psi

IPS Water-Tite Icemaker Valve Outlet Box With 1/4 Turn Valve And Water Hammer Arrestor, PEX, Lead Free. Water Hammer Arrestor Installed. 1/4 Turn Chrome Valve, Lead Free.

• Lead-free compliant (valves feature white handle and check mark stamping)
• Rough opening: 5 in. W x 4 78 in. H x 3 in. D; faceplate dimension 8 in. W x 7 516 in. H
• 1-piece box and flange design needs no additional support framing nor support framing labor
• Snap-on faceplate accommodates up to in. drywall
• Water-Tite
• Icemaker valve outlet box
• 1/4 turn
• PEX
• Lead free
• Water hammer arrestor

• Lead free compliant

The NIBCO lead-free, brass ball valve with solder end connections provides bubble-tight shutoff. The valve's PTFE seats and lead-free ball exhibit high corrosion resistance properties. The valve is ideal for hot/cold water applications.

• 11/2 in. Inside Diameter and 1.625 in. Outside Diameter
• Full port
• Blowout-proof stem
• Female solder cup end connections
• CSA certified to ASME B16.44
• Valve pressure rating 600 psi/41.4 bar non-shock cold working pressure
• Standard lever handle
• "11/2 I.D. and 1.625 O.D."

The NIBCO lead-free, brass ball valve with solder end connections provides bubble-tight shutoff. The valve's PTFE seats and lead-free ball exhibit high corrosion resistance properties. The valve is ideal for hot/cold water applications. The NIBCO brass ball valve provides ease of operation with quarter-turn (90 degree ) open to close. The two-piece valve features solder end connections for easy installation.

• Lead free
• Full port
• Blowout-proof stem
• Standard lever handle
• Female solder cup end connections
• NSF/ANSI-61-8
• NSF/ANSI-372
• UPC-IGC-157

SharkBite 3/4 in. Push-to-Connect Brass Check Valve is the fastest way to connect PEX, Copper, CPVC, PE-RT, or HDPE pipe in any combination. No soldering, clamps, unions, glue, or special tools required. Simply insert the pipe and the teeth bite down and grip tight, while a specially formulated O-ring compresses to create a watertight seal. Changes can easily be made by rotating the fitting after installation. Removing the fitting is just as fast using a disconnect tool so fittings and valves can be easily changed or reused. Designed with stainless steel gripping teeth for a secure connection, chlorine-resistant O-ring for a long-lasting seal and backed by a 25-year warranty.

• Push-to-Connect fittings are ideal for installation in tight spaces
• Rated to 200 degree F and 200 PSI
• Approved for underground and behind-the-wall applications with no access panels (wrapping required when burying underground)
• Can be installed on wet or dry lines and pressure tested immediately, no waiting on soldered joints to cool or solvents to dry
• Low-lead DZR corrosion resistant brass body
• Code approved, IAPMO listed, for details see Specifications
• 25-Year Warranty when used with PEX, copper, CPVC & PE-RT Pipe
• 5-Year Warranty when used with SDR-9 HDPE Pipe
• Listed by IAPMO and design certified and listed to ASSE 1061/NSF 61
• Meets all UPC, IPCand cUPC requirements
• Demount clip allows user to release the fitting from the pipe for convenient installation flexibility (sold separately)
• 3/4 in. Pipe Insertion Depth = 1-1/8 in.

This 3/4 inch lead free temperature and pressure relief valve is designed to provide automatic temperature and pressure protection to hot water supply tanks and hot water heaters up to 105,000 BTU per hour. This two in one relief valve provides a proven and cost effective means to protect against excessive temperature and pressure emergency conditions. It features a lead free copper alloy body with NPT male inlet and NPT female outlet connections, a unique thermostat with special thermo-bonded coating, and test lever. The temperature relief is 210 degrees F (99 degrees C) and the pressure relief is set at 150 psi (10.3 bar).

• Lead free copper alloy body
• Extension thermostat with thermo-bonded coating
• Stainless steel spring
• ASME rated and CSA listed
• Pressure relief range is 75 to 150 psi
• ASME rated, CSA Listed
• NPT male inlet and NPT female outlet connections
• Used to provide automatic temperature and pressure protection to hot water supply tanks and hot water heaters up to 105,000 BTU/hr
• ANSI Z21.22 certified
• Automatic reseating

• Lead free compliant

Cash Acme pressure regulating valves are designed to reduce incoming water pressure to a safe pressure to protect plumbing components. They also help to prevent pressure surges from entering the household from the main line. High pressure can cause damage to appliances and plumbing. A pressure regulator should be installed after the main line to help protect plumbing. The Cash Acme EB-45 is a half-cartridge based pressure reducing and regulating valve with a lead free bronze body. The valve resembles traditional regulators with a spring chamber and an adjusting screw but offers the high performance of a cartridge based valve. Fitted with the SharkBite Connection system the EB-45 can be installed using a push-fit connection that can be installed on any combination of Copper, CPVC, or PEX Pipe.

• Solid lead-free bronze construction
• Factory set to regulate flow to a safe 45 psi, adjustable from 10-70 psi
• Direct SharkBite connections allow for a push-fit connection on any combination of copper, CPVC, PEX
• Integrated internal by-pass mechanism
• Cartridge based design allows for quick and easy service
• Certified to ASSE 1003 and CSA B356 and listed by ASSE and IAPMO (cUPC)
• Push-fit design allows for easy installation with no glue or solder required
• Designed for use where inlet pressure does not exceed 400 psi
• Suited for hot (up to 180) or cold water service

IPS Water-Tite Icemaker Valve Outlet Box With 1/4 Turn Valve And Water Hammer Arrestor, cPVC, Lead Free. Water Hammer Arrestor Installed. 1/4 Turn Chrome Valve. Lead Free.

• Lead-free compliant (valves feature white handle and check mark stamping)
• Rough opening: 5 in. W x 4 78 in. H x 3 in. D; faceplate dimension 8 in. W x 7 516 in. H
• 1-piece box and flange design needs no additional support framing nor support framing labor
• Snap-on faceplate accommodates up to in. drywall
• Water-Tite
• Ice maker valve outlet box
• 1/4 turn valve
• Water hammer arrestor
• cPVC
• Lead free

The NIBCO lead-free, brass ball valve with solder end connections provides bubble-tight shutoff. The valve's PTFE seats and lead-free ball exhibit high corrosion resistance properties. The valve is ideal for hot/cold water applications.

• Lead free
• Full port
• Blowout-proof stem
• Standard lever handle
• Female solder cup end connections
• IAPMO listed to NSF/ANSI-61-8, NSF/ANSI-372
• Valve pressure rating 600 psi/41.4 in. bar non-shock cold working pressure (3/8 in. to 2 in.)