Frost Free Sillcock. Chrome-Plated Brass. 1/2 in. Male and 1/2 in. Solder Multi-turn.

• Chrome-plated brass body and tube for corrosion resistance
• 3/4 in. hose thread outlet
• Automatically drains upon water shutoff
• Notched flange allows stable installation on siding

The Everbilt Lead Free Ball Valve with Drain is constructed of heavy forged brass and has a lever handle with Female connections on both ends. Designed for residential and commercial use on water air, steam, oil or gas. Full port for maximum flow and minimum pressure drops. This multi-purpose manual lever ball valve has excellent corrosion resistance and is fit for many applications.

• Extremely low return rate
• Forged brass construction
• Lead free design is suitable for all potable water supply installations
• Easy quarter-turn operation
• Suitable for oil, water and gas
• Side tap allows non-pressure side to be drained when valve is in the closed position
• Threaded connections

SharkBite Push-to-connect ball valve is the easiest way to install a new or replacement shut-off ball valve. The single lever quarter-turn control allows for easy operation and the valve is perfect for potable water and hydronic applications where a shut-off is needed. No soldering, clamps, unions, glue, or special tools are required. Simply insert the pipe and the teeth bite down and grip tight, while a specially formulated O-ring compresses to create a watertight seal. Changes can easily be made by rotating the valve after installation. Removing the valve is just as fast using a disconnect tool so the valve can be easily changed or reused. Designed with stainless steel gripping teeth for a secure connection, a chlorine-resistant O-ring for a long-lasting seal, and backed by a 25-year warranty.

• Compatible with PEX, copper, CPVC, PE-RT, and HDPE pipe
• Push-to-connect fittings are ideal for installation in tight spaces
• Rated to 200 degrees Fahrenheit and 200 PSI
• Approved for underground and behind-the-wall applications with no access panels (wrapping required when burying underground)
• Can be installed on wet or dry lines and pressure tested immediately, no waiting on soldered joints to cool or solvents to dry
• Low-lead DZR corrosion-resistant brass body
• Code approved, IAPMO listed, for details see Specifications
• 25-Year warranty when used with PEX, copper, CPVC & PE-RT pipe
• 5-Year warranty when used with SDR-9 HDPE pipe
• Meets all UPC, IPC, and cUPC requirements
• Demount clip allows user to release the fitting from the pipe for convenient installation flexibility (sold separately)
• Rated to 200 degree F and 200 psi
• 3/4 in. pipe insertion depth - 1-1/8 in.

The 1/2-inch barb x 1/2-inch barb brass fitting provides contractors with speedy installation and cost savings that is perfect for commercial or residential applications. The versatile construction can be uses to either isolate a fixture or main line for easy maintenance and repairs. The lead-free eco-brass construction delivers dependability and peace of mind for building owners. High-temp and freeze-resistant materials allows for adaptation to hot and cold water applications for PEX systems.

• High-temp and freeze-resistant materials adapt to both hot and cold water applications for PEX systems
• This versatile brass valve can be used to either isolate a fixture or main line for easy maintenance and repairs
• Cooper construction holds up to years of use and ensures sanitation
• Pressure ratings of up to 80 PSI at 200 degrees Fahrenheit handles the high demand of commercial usage
• NSF 61 certified
• 25-year warranty proven to last the lifetime of the building

The NIBCO lead-free brass ball valve with threaded end connections provides bubble-tight shutoff. The valve's PTFE seats and lead free ball exhibit high corrosion resistance properties. The valve is ideal for hot/cold water and gas applications. The NIBCO lead-free brass ball valve provides ease of operation with quarter-turn (90 degrees) open to close. The two-piece valve features threaded end connections for easy installation.

• Lead free
• Full port
• Blowout-proof stem
• IAPMO listed to NSF/ANSI-61-8, NSF/ANSI-372 and UPC-IGC-157
• CSA ANSI Z21.15 / CSA 9.1
• CSA ASME B16.44: 5 psig (maximum)
• CSA ASME B16.33: 125 psig (maximum)
• CSA CAN / CGA 3.16
• CSA CGA CR91-002: 1/2 psig, 2 psig and 5 psig
• FM 1140 approved 175 wwp
• UL 1477 (YQNZ): compressed gas shutoff valves 250 psi
• UL 842 (YRPV): gas shutoff valves 250 psi
• UL 842 (YRBX): flammable liquid shut off valves 250 psi
• UL 842 (MHKZ): manual valves 250 psi
• UL 125 (YSDT): LP-gas shutoff valves 250 psi
• UL subject 258 (VQGU): trim and drain valves
• Valve pressure rating 600 psi/41.4 bar non-shock cold working pressure

The Apollo ExpansionPEX Ice Maker Outlet Box includes a 1/2 in. Brass PEX-A barb ice maker valve and is simple to install. It provides flow control through an anti-stick and smooth operating quarter-turn handle. Ideal for installations of ice makers, refrigerators and filtered water dispensers. Apollo ExpansionPEX barb fittings are a key component of the most economical potable water piping systems. Apollo ExpansionPEX barb connections must be secured into place Apollo ExpansionPEX sleeves or comparable expansion-type sleeve or ring (all sold separately). The Apollo ExpansionPEX system is a comprehensive piping system comprised of lead free brass fittings, poly alloy fittings, manifolds, valves, fasteners, tools and tubing designed for implementation in water delivery systems, simple or complex. A cold-expansion tool (sold separately) is required for installation.

• Valve constructed of lead free dezincification resistant (DZR) brass for superior reliability and strength
• Designed exclusively for use within type A PEX piping systems
• 1/4 in. O.D. male compression outlet
• Box design allows for left or right stud mounting
• Snap in place faceplate allows for up to 3/4 in. drywall
• Ideal for installations of ice makers, refrigerators and filtered water dispensers
• Larger internal diameter of Apollo ExpansionPEX fittings results in a 25% greater flow rate within the system
• Meets or exceeds ASTM F1960 standard
• Meets UPC, IPC, and cUPC standard requirements
• Must secured in place using Apollo ExpansionPEX sleeves or other PEX-A expansion sleeves/rings (all sold separately)
• NSF listed
• Barb x barb connection for PEX-A plumbing systems
• Go/no-go gauges are never required
• To ensure secure connections every time, fittings cannot be dry fit
• Maximum working pressure of 200 psi and maximum temperature of 200 degree F

SharkBite Push-to-connect ball valve is the easiest way to install a new or replacement shut-off ball valve. The single lever quarter-turn control allows for easy operation and the valve is perfect for potable water and hydronic applications where a shut-off is needed. No soldering, clamps, unions, glue, or special tools are required. Simply insert the pipe and the teeth bite down and grip tight, while a specially formulated O-ring compresses to create a watertight seal. Changes can easily be made by rotating the valve after installation. Removing the valve is just as fast using a disconnect tool so the valve can be easily changed or reused. Designed with stainless steel gripping teeth for a secure connection, a chlorine-resistant O-ring for a long-lasting seal, and backed by a 25-year warranty.

• Compatible with PEX, copper, CPVC, PE-RT, and HDPE pipe
• Push-to-connect fittings are ideal for installation in tight spaces
• Rated to 200 degrees Fahrenheit and 200 PSI
• Approved for underground and behind-the-wall applications with no access panels (wrapping required when burying underground)
• Can be installed on wet or dry lines and pressure tested immediately, no waiting on soldered joints to cool or solvents to dry
• Low-lead DZR corrosion-resistant brass body
• Code approved, IAPMO listed, for details see Specifications
• 25-Year warranty when used with PEX, copper, CPVC & PE-RT pipe
• 5-Year warranty when used with SDR-9 HDPE pipe
• Meets all UPC, IPC, and cUPC requirements
• Demount clip allows user to release the fitting from the pipe for convenient installation flexibility (sold separately)
• Rated to 200 degree F and 200 psi
• 1/2 in. pipe insertion depth - 15/16 in.

This unique lead-free saddle valve comes with a compression end that is already assembled with a captive sleeve, which puts even pressure on the tubing, ensuring a tight seal. Use with copper, brass, aluminum, thermoplastic and plastic tubing. Not recommended for use with steel tubing.

• Withstand temperatures up to 160 degree F
• Pressure up to 100 psi
• 2 years warranty against defect
• Without shutting off water
• Needle
• Compression

2 years warranty against defect. Extended garden hose threads for secure connection. Adjustable packing nut.

• Withstand temperatures up to 176 degree F
• Pressure up to 125 psi
• High flow
• Cast brass
• MIP x MHT
• Sillcock

The 3/4 in. barb x 3/4 in. barb brass fitting provides contractors with speedy installation and cost savings that is perfect for commercial or residential applications. The versatile construction can be uses to either isolate a fixture or main line for easy maintenance and repairs. The lead-free eco-brass construction delivers dependability and peace of mind for building owners. High-temp and freeze-resistant materials allows for adaptation to hot and cold-water applications for PEX systems.

• High-temp and freeze-resistant materials adapt to both hot and cold water applications for PEX systems
• Versatile brass valve can be used to either isolate a fixture or main line for easy maintenance and repairs
• Cooper construction holds up to years of use and ensures sanitation
• Pressure ratings of up to 80 PSI at 200 degree F handles the high demand of commercial usage
• NSF 61 certified
• 25-years warranty proven to last the lifetime of the building

The product is high quality and reliability and durability. The product is ease to use and attractive styling. The product is wide selection of product choices and great value. And it is made in Taiwan.

• High quality
• Reliable performance
• Easy to install
• Durability
• Wide selection
• Great value

This frost free sillcock features a solid brass construction. It is chrome plated finish. It is with integral vacuum breaker. It meets ASSE 1019 and ASME A112.18.1/CSA B125 Standards.

• Brass body construction
• Chrome plated
• 3/4 in. hose thread outlet
• Iron handle
• Frost-free sillcock
• With integral vacuum breaker

2 years warranty against defect. Extended garden hose threads for secure connection. Adjustable packing nut.

• Withstand temperatures up to 176 degree F
• Pressure up to 125 psi
• High flow
• Cast brass
• MIP x MHT
• Sillcock

Try our Add-A-Line Full-Slip Valve tee. This valve features a one piece forged brass compression and sweat tee body. It's 7/8 in. compression trunks provide easy and totally torchless installations.

• Adding water lines has never been easier
• Perfect for adding humidifiers, dishwashers, or ice makers
• Quality brass ball valve replaces cheap saddle valves that leak and clog
• Compression trunks are perfect for adding lines near HVAC or plastic drainage pipe that may get damaged by a soldering torch
• Very durable
• Torchless installations

2 years warranty against defect. Installed in-line to prevent backflow. The valve opens allowing full flow in 1 direction and closes to seal and prevent backflow and maintain prime.

• Withstand temperatures up to 176 degree F
• Pressure up to 150 psi
• Higher flow rate
• Sweat
• Sweat x sweat
• Check

Installed in a 3 in. PVC white DWV piping drainage system. This is to provide waste water backflow protection to fixtures and floor drains, below the flood plane. Provided with a rubber O-ring, and cap for inside cleaning and inspection.

• Protects basements and other low level areas from the backflow of sanitary sewer, storm sewer, or septic system
• Positive seal created by neoprene O-ring
• Injection molded in PVC
• Easy to install
• Comes complete with O-ring
• Flame retardant, will not support combustion in the presence of an ignition source
• Hand tightened lid plus a half turn provides a complete seal
• Can be buried up to 16 in. when used with a CANPLAS backwater valve sleeve kit

Perfect for residential and commercial irrigation, the Everbilt Garden Valve provides a positive shut off and hose outlet connection on vertical piping. Easily open and close the valve by rotating the handle. It is designed to fit on all standard garden hoses. It is constructed of durable, rust-resistant heavy-duty brass.

• Multi-turn handle controls water flow
• 3/4 in. FIP threaded inlet
• 3/4 in. hose thread outlet fits most 3/4 in. garden hoses
• Durable, corrosion resistant brass construction
• 1-year limited warranty
• Maximum pressure 125 psi

2 years warranty against defect. Installed in-line to prevent backflow. The valve opens allowing full flow in 1 direction and closes to seal and prevent backflow and maintain prime.

• Withstand temperatures up to 176 degree F
• Pressure up to 150 psi
• Higher flow rate
• Threaded
• FIP x FIP
• Check

2 years warranty against defect. Installed in-line to prevent backflow. The valve opens allowing full flow in 1 direction and closes to seal and prevent backflow and maintain prime.

• Withstand temperatures up to 176 degree F
• Pressure up to 150 psi
• Higher flow rate
• Sweat
• Sweat x sweat
• Check

The Everbilt Lead Free Gate Valves feature a simple design that can quickly and reliably block or permit the flow of fluids, gases or fumes. These valves contain a gate mechanism that when lifted opens the valve and when lowered closes it. They are easy to install thanks to threaded ends and their small footprint makes these metal gate valves perfect for piping systems where space is tight. Metal gate valves are durable and can withstand high temperatures, so common applications include indoor residential and commercial plumbing systems as well as numerous outdoor applications.

• Lead free forged brass body
• Features a non-rising stem that enables operation in tight spaces
• Multi-turn handle operation
• Lead free design is suitable for all potable water supply installations
• During installation, only apply heat to valve while in the open position
• Can be soldered onto type K, L, or M rigid copper pipe
• Valve not intended to throttle the flow of water, use only in a fully opened or fully closed position
• Suitable for non-shock operating pressures up to 200 psi

The Everbilt Lead Free Gate Valves feature a simple design that can quickly and reliably block or permit the flow of fluids, gases or fumes. These valves contain a gate mechanism that when lifted opens the valve and when lowered closes it. They are easy to install thanks to threaded ends and their small footprint makes these metal gate valves perfect for piping systems where space is tight. Metal gate valves are durable and can withstand high temperatures, so common applications include indoor residential and commercial plumbing systems as well as numerous outdoor applications.

• Lead free forged brass body
• Features a non-rising stem that enables operation in tight spaces
• Multi-turn handle operation
• Lead free design is suitable for all potable water supply installations
• During installation, only apply heat to valve while in the open position
• Can be soldered onto type K, L, or M rigid copper pipe
• Suitable for non-shock operating pressures up to 200 psi
• Valve not intended to throttle the flow of water, use only in a fully opened or fully closed position

2 years warranty against defect. Brass Female threaded Sillcock Valve is used as a garder hose valve. Features a 45 angle spout with male hose threads.

• Withstand temperatures up to 176 degree F
• Pressure up to 125 psi
• Brass construction
• Seal washer
• Sillcock
• Sweat x MHT

Installed in a 4" PVC white DWV piping drainage system. This is to provide waste water backflow protection to fixtures and floor drains, below the flood plane. Provided with a rubber o-ring, and cap forinside cleaning and inspection.

• Protects basements and other low level areas from the backflow of sanitary sewer, storm sewer, or septic system
• Positive seal created by neoprene O-ring
• Injection molded in PVC
• Easy to install
• Comes complete with O-ring
• Flame retardant, will not support combustion in the presence of an ignition source
• Hand tightened lid plus a half turn provides a complete seal
• Can be buried up to 16 in. when used with a CANPLAS backwater valve sleeve kit