Would you like to know if water gets too high in your sump or sewage pit? Is it code in your area to have a high water alarm on your sump or sewage pit? If so, the PS-WS is an accessory for The Pro Series Deluxe Float Controller (DFC2, VSC2, TSC2) that will activate a warning light, an audible alarm, send a signal to the remote terminal, and send information through the USB port when water reaches the sensor (allowing for text, email and in app notifications using the PS-WiFi). It simply attaches to the discharge pipe with included mounting hardware and the 10 foot cord plugs in at the bottom of the Deluxe controller. Between the visual light, audible alarm and optional text or email notifications (when using the PS-WiFi) you can be In the know when you are on the go.

• Will activate a warning light, an audible alarm, send a signal to the remote terminal, and send information through the USB port when water reaches the sensor
• For use with the pro series deluxe float controller (DFC2, VSC2, TSC2) or pro series water alarm (PWA2)
• Easily attaches to the discharge pipe with included mounting hardware
• 10 ft. cord with plug

The PHCC Pro Series High Water Alarm is designed to minimize the risk of water damage by acting as an early warning system. For over two decades The Pro Series High Water Alarm has been protecting from unwanted water damage. It can be placed next to a water heater, beneath a laundry tub, under a sink, behind a refrigerator, next to the air conditioner, anywhere where water or moisture can collect. All it takes is 1/32 in. of water to sound a 110 dB alarm, detecting water before mold can grow, or alerting you to potential flood conditions. It includes 6 ft. of wire for extending the sensor to hard to reach locations. You can even increase the wire length up to 100 ft.

• Battery operated alarm can detect as little as 1/32 in. of water
• Produces a loud 110 dB alarm that can be heard throughout the house to provide an effective early warning system
• Use in a variety of locations: in a sump pit, near water heaters, refrigerators or dishwashers, next to washing machines, under sinks, close to air conditioner drain tubes or wherever there is a risk of water damage
• Battery-saver feature only uses energy when the alarm is sounding to offer a long battery life
• Accommodates the addition of more than 100 ft. of wire (additional 24-Gauge wire not included)
• Requires 9-Volt battery (not included)

• Maintenance free - no need to add battery fluid or distilled water
• Compatible with all new PHCC Pro Series backup products
• Up to 50 hours of protection (based on a 10% duty cycle) on the PS-C33 combination and PHCC-2400 battery backup sump pump system
• Up to 60 hours of protection (based on a 10% duty cycle) on the PS-C22 combination and PHCC-1730 battery backup sump pump system
• Up to 100 hours of protection (based on a 10% duty cycle) on the PS-C11 combination and PHCC-1000 battery backup sump pump system
• Runs pump intermittently for days