The Everbilt Waterfall Utility Pump is constructed of corrosion-resistant stainless steel. This unit may be used as a submersible waterfall/fountain pump. It can create streams, waterfalls or fountains in your garden pond. The water cooling/ oil free motor design is safe to use around fish. You may also use this pump as a dewatering pump where high flow is needed.

• Heavy-duty energy-efficient PSC motor reduces operating costs
• 1-1/4 in. MNPT discharge compatible with 1-1/4 in. tubing/piping
• Built-in automatic reset thermal overload protector prevents motor from overheating.
• Oil-free design is fish and plant safe
• 15 ft. power cord
• 2 year warranty

The Everbilt 1/2 HP Pedestal pump is designed to remove water from a basement sump pit. It works well in narrow sump pits with diameters of 12" or larger. This powerful pump moves up to 4,600 GPH and a maximum lift of 22 ft. The pump is constructed with a heavy-duty cast iron base, a stainless steel column, and motor shaft and comes completely assembled for easy installation. It is powered by a heavy-duty, high-efficiency dual ball bearing PSC motor with thermal overload protector and reduces operating cost. The innovative float design is protected by the motor assembly. The adjustable float allows for easy adjustment to change the operating cycle. The top handle can be used to easily move the pump.

• Heavy-duty cast iron and stainless steel construction ensures long lasting durability
• Fits in 12 in. diameter or larger sump pit
• Heavy-duty, dual ball bearing 115 volt PSC designed motor is energy efficient and reduces operating cost, fan cooled design keeps the operating temperature low
• Durable stainless steel motor shaft extends life
• Adjustable vertical float switch is pre-installed for easy installation
• Maximum lift at 22 ft.
• 1-1/2 in. female NPT discharge with 1-1/4 in. female NPT adapter included
• 8 ft. power cord with grounded plug for easy installation
• 3 year warranty

This Everbilt 1/3 HP Utility Sink pump is complete and compact. Constructed of reinforced thermoplastic, it is perfect for basement bars, laundry, utility sinks, etc. Simple installation, no need for traps, vents, and costly labor charges. Includes: pump assembly, sink drain screen, Slip check valve and Ball valve. Easily mounts directly underneath your sink when a drain line is not available.

• Perfect for draining basements wet bars, laundry or utility sinks
• Easy to install - eliminates the need for traps, vents, and costly labor charges
• Piggyback diaphragm switches for automatic or manual operation
• 115 Volt, Fan-cooled PSC motor
• 8 ft. Power Cord
• 1 Year Warranty

The Everbilt 3/4 HP rugged cast iron convertible jet pump has superior performance at depths to water to 70 ft. or less. Self-priming after pump housing is initially filled, the unit is supplied with a pre-installed 30-50 pressure switch for automatic operation and a pressure gauge to monitor pressure. The unit is supplied with both the shallow well and deep well ejectors. The unit comes with the shallow well jet ejector installed on the pump for applications with depths to water 25 ft or less (one pipe system). For deep well applications, remove the shallow well ejector from the front of the pump and replace the nozzle and venturi with the deep well venturi and nozzle supplied for deep well applications. For deep well installations with water depths over 25 ft. to 70 ft., the ejector is installed in the well using 1 in. and 1-1/4 in. piping (two-pipe system).

• Heavy-duty cast iron construction for maximum durability
• Heavy-duty, dual voltage, dual ball bearing, 115/230V motor is preset at 230 volts and has a built-in voltage switch for easy conversion to 115 volts; see instructions
• Totally enclosed fan cooled motor (TEFC) design protects the motor internals from the elements and rodents, fan cooled helps reduce motor temperature and increases life
• 30-50 pressure switch pre-installed for automatic operation. also includes 100 PSI gauge for monitoring pressure
• Supplied with shallow well ejector installed and deep well conversion components
• Shallow well application: depth to water 25 ft. or less
• Deep well application: depth to water 25 ft. - 70 ft.
• 1 year warranty

The Everbilt Jet/Tank system comes with a 1/2 HP shallow well jet pump manufactured of heavy-duty cast iron for durability. The system also includes a 6 gallon pre-charged tank (15 gallon standard tank equivalent), stainless steel braided hose and the fittings to connect the pump to the tank. The system may be used for water depths to 25 ft. which includes drilled wells, driven wells, bored wells, creeks, lakes, ponds, and other water sources when the distance to the water is 25 ft. or less. Typical applications would be water supply for small homes, cabins, farms, low-flow sprinkler systems, and utility water.

• Totally enclosed fan cooled (TEFC) motor protects motor internals from the elements, energy efficient PSC design reduces operating cost
• Dual voltage, 115/230V motor is preset at 230 volts and has a built-in voltage switch for easy conversion to 115 volts; see instructions
• Pre-mounted 30-50 pressure switch for automated operation
• Pressure gauge included for monitoring pressure
• 1-1/4 in. NPT suction and 1 inch NPT discharge
• Self-priming after pump housing is initially filled and foot valve or check valve is installed
• Certified to NSF/ANSI CAN 61 Standard for Safe Drinking Water and NSF/ANSI 372 Lead-Free Standard
• 1 year warranty

The Everbilt 1/3 HP Pedestal Sump Pump is designed to remove water from a basement sump pit. It works well in narrow sump pits with diameters of 12" or larger. The pump is constructed of non-corrosive reinforced thermoplastic and moves water up to 2,400 GPH at 10' of lift. It comes with a fully adjustable automatic float switch that turns the pump on and off. The heavy-duty, high-efficiency PSC motor has thermal overload protection.

• Fits in 12" diameter or larger sump pit
• Thermoplastic corrosion-resistant construction
• 115-Volt PSC motor
• Fully adjustable automatic switch
• Maximum lift at 20 ft.
• 1-1/4" NPT discharge
• 8 ft. power cord
• 1 Year Limited Warranty

Find the perfect pump for your basement with the Everbilt 1/2HP Pre-Plumbed Sewage Basin System. Perfect for pumping below grade toilets, washing machines and sinks to a sewer or on-site wastewater system. Arrives pre-plumbed with no internal plumbing needed and ready for installation. The system features an injection-molded structural foam polyethylene basin and cover for exceptional, heavy-duty durability. Includes a tough and solid 1/2HP cast-iron sewage pump with a strong, tethered mechanical float switch, a pump performance valve and a water-tight molded 4 in. inlet hub.

• Features an 18 in. x 30 in., 30 Gal., heavy duty sewage basin with a water-tight snap-in molded inlet hub
• Ultra-strong cover comes with 2 in. threaded discharge and vent flanges, a molded cord grommet, a molded reusable cover seal and 8-stainless bolts and washers to secure the cover to the basin
• Automatic, all cast-iron sewage pump passes 2 in. solids and features 10 ft. power and piggy-back float switch cords
• System pumps up to 6,480 GPH
• Ultra-quiet, heavy duty ABS compression fit check valve passes a full 2 in. solid
• Molded inlet hub comes with a stainless steel clamp for securing the inlet pipe

The Everbilt 1 HP rugged cast iron convertible jet pump has superior performance at depths to water to 70 ft. or less. Self-priming after pump housing is initially filled. The unit is supplied with a built-in 30/50 psi pressure switch for automatic operation and a pressure gauge. The unit is supplied with both the shallow well and deep well ejectors. The unit comes with the shallow well jet ejector installed on the pump for applications with depths to water 25 ft. and below. The deep well venturi and nozzle is supplied for deep well applications. For deep well applications with water depths over 25 ft. to 70 ft., the venturi and nozzle are placed in the well on the piping. The unit is supplied with a 1-year warranty.

• Rugged cast-iron construction
• Supplied with the shallow well jet ejector installed and supplied with the deep well components
• For professional technical support call 1-844-241-5521
• Heavy-duty dual voltage 115/230-Volt motor, pre-set at 230-Volt
• Deep well application water level: 70 ft.
• Shallow well application: depth to water 25 ft. or less
• Deep well application:depth to water 25 ft. - 70 ft.
• One-year warranty
• Call 1-844-241-5521 for Installation Help

The Everbilt Pre-Plumbed Sump Basin System is ideal for basement installations, pumping below grade drainage and grey water. The system collects and pumps wastewater to a sewer or an on-site wastewater system. The system comes pre-plumbed and ready to install; no internal plumbing is required. The system features an injection molded structural foam polyethylene basin and cover that provides superior structural toughness and reliability. It includes the Everbilt Model HDS30, 3/10 HP Cast Iron Sump Pump. This Pre-Plumbed System also includes the Everbilt Inline Sump Check Valve and a water-tight molded 4 in. inlet hub.

• Features an 18 in. x 24 in., 22.5 Gal., heavy duty sump basin with a water-tight snap-in molded inlet hub
• Comes with the Everbilt HDS30 3/10 HP cast iron sump pump
• Heavy duty structural foam injection molded basin cover features a clear view removable inspection plate, the Sump DrainTrap cover drain, 1-1/2 in. threaded discharge flange, 2 in. threaded vent flange, molded reusable PVC cover seal and 8-bolts for a gas and odor tight seal
• System pumps up to 3,160 GPH
• Ultra-quiet Everbilt inline sump pump check valve
• Molded inlet hub comes with a stainless steel clamp for securing the inlet pipe

The Everbilt sewage basin system gives you the flexibility of adding a free-standing toilet to almost any finished surface in your home, warehouse or factory. The automatic vertical float switch activates the 1/2 HP sewage pump that is contained in the sealed basin. The 1/2 HP pump removes 6,000 GPH at 10 ft. of lift. It is constructed of rugged cast-iron for maximum pump life. The non-clogging vortex impeller is designed to handle up to 2 in. solids. The unit is built with ball bearings to provide quiet operation. The graphite and ceramic mechanical seals provide extended motor life. The unit has a 2 in. NPT discharge with a 10 ft. power cord.

• Pumps 6,000 GPH at 10 ft. of lift, emptying a sewage pit quickly
• Designed to remove waste water from toilet, non-sewage basin shower, this unit is ideal for basements, room additions, factories and warehouses
• Installation is easy onto almost any surface
• Unit is supplied with 2 in. discharge and check valve assembly
• 1 year limited warranty