Maintenance Warehouse Utility Pump. 0.17 Hp Oil-Filled High-Efficiency Motor. 25 GPM @ 0' Head. Max 27' Head. 1" NPT Discharge With Garden Hose Adapter Included. 115 Volt, 60 Hz, 2.2 Amp. 1" Minimum Water Level For The Pump To Prime And Operate. Corrosion-Resistant Reinforced Thermoplastic Construction. Bottom Suction Design Filters Debris And Removes Water Down To 0.25". Handle Designed For Easy Portability. Mfg #SU125

• 0.17 Hp Oil-Filled High-Efficiency Motor
• 25 GPM @ 0' Head
• Max 27' Head
• 1" NPT Discharge With Garden Hose Adapter Included

Pro Series Pumps High Water Alarm is designed to minimize the risk of water damage by acting as an early warning system. For over two decades the Pro Series Pumps High Water Alarm has been protecting from unwanted water damage. It can be placed next to a water heater, beneath a laundry tub, under a sink, behind a refrigerator, next to the air conditioner, anywhere where water or moisture can collect. All it takes is 1/32 in. of water to sound a loud 110 dB alarm, detecting water before mold can grow, or alerting you to potential flood conditions. It includes 6 ft of wire for extending the sensor too hard to reach locations. You can even increase the wire length up to 100 ft. The built in accessory jack allows for additional sensors or a high-water float.

• Battery operated alarm can detect as little as 1/32 in. of water
• Produces a loud 110 dB alarm that can be heard throughout the house to provide an effective early warning system
• Use in a variety of locations: in a sump pit, near water heaters, refrigerators or dishwashers, next to washing machines, under sinks, close to air conditioner drain tubes or wherever there is a risk of water damage
• Sensor wire extends 6 ft. and can be lengthened for hard to reach areas, accommodates the addition of more than 100 ft. of wire (additional 24-Gauge wire not included)
• Built in accessory jack allows for an additional 360 degree water sensor PS-WS360 or a high water float PS-WS (Item 3570418)
• Battery-saver feature only uses energy when the alarm is sounding to offer a long battery life
• Requires 9-Volt battery (not included)
• 5 Year limited warranty

Utility gauge for commercial and industrial markets. Black steel case, chrome bezel, copper alloy internals. This gauge has a 2 dial, 1/4 NPT, 100 psi/bar scale.

• 2 in. dial 1/4 NPT
• Accuracy 3-2-3% of span, ASME B40.1 grade B
• 100 psi/bar scale with no logo
• Black steel case with brass wetted parts

The product is high quality and reliability and durability. The product is easy to use and attractive styling. The product is wide selection of product choices and great value.

• High quality
• Replace old and worn parts
• No special tools needed
• Easy to install

Utility water test gauge. This gauge is used for pressure tests of residential and commercial water lines. This gauge has a 300 psi scale and a 3/4 in. female swivel connection for water lines.

• 3/4 in. female copper alloy swivel connection for water lines
• Top mounted to make it easy to read when connected
• Accuracy 3-2-3% of span, ASME B40.1 grade B
• 2-1/2 in. dial and 300 psi standard

The product is well made with good surface treatment. The product is easy to use and attractive styling. It's easy to handle and install. The product is wide selection of product choices and great value.

• Easy to install with little tools required
• Competitively priced
• High quality
• Reliability

Pressure switches are used to control electrically driven water pumps, suitable for all types of pumps: jets, submersible, reciprocating, etc. Pressure switches are needed for rural water systems that rely on wells to supply their water. Water is pumped from the well or other water source to the pressure tank and as the tank fills the air in the tank becomes pressurized. When the pre-set pressure is reached, the pressure switch contacts open to stop the pump. When water is used, the pressure on the pressure tank falls and as it reaches the pre-set cut in pressure of the switch the contacts close, starting the cycle over. These pressure switches are easily adjusted by following instruction inside the switch cover.

• Standard duty
• NEMA type 1 indoor enclosure
• 2 pole, rated 1-1/2 HP at 115 Vac, 2HP at 230 Vac
• Pressure connection: 1/4 in. NPSF, pressure setting 40-60
• Adjustable cut in/out: cut out range 20-65 psig

This air valve provides a method of injecting and holding air pressure in water systems. Other uses include pressurizing piping systems for pressure test and blowing out irrigation lines. It is a general purpose valve.

• General purpose - 1/4 in. MPT tank valve
• Working pressure 0-200 psi
• Working temperature -40 degree F to +225 degree F
• Opening pressure 60 psi
• Lead free

Utility gauge for commercial and industrial markets. Black steel case, chrome bezel, copper alloy internals. This gauge has a 2 1/2 dial, 1/4 npt, 100 psi/bar scale.

• 2 12/ dial, 1/4 npt connection
• 100 psi/bar scale with no logo
• Accuracy 3-2-3% of span, ASME B40.1 Grade B
• Black steel case, brass internals, dry only case.

Utility gauge for commercial and industrial markets. Black steel case, chrome bezel, copper alloy internals. 2 in. Dial 1/4 NPT 30 psi/bar.

• 2 in. dial 1/4 NPT 30 psi
• Accuracy 3-2-3% of span, ASME B40.1 grade B
• 30 psi/bar scale no logo
• Black steel case, chrome bezel, copper alloy inter

Detectable 5 mil Underground Marking Tape, 3" x 1000' GAS

• Aluminum foil alerts about buried installation below
• Designed to identify, protect, and locate buried lines
• Black letters and colored background for clear visibility
• Designed for open trench applications

Pressure switches are used to control electrically driven water pumps, suitable for all types of pumps; jets, submersible, reciprocating, etc. Pressure switches are needed for rural water systems that rely on well to supply their water. Water is pumped from the well or other water source to the pressure tank and as the tank fills the air in the tank becomes pressurized. When the pre-set pressure is reached, the pressure switch contacts open to stop the pump. When water is used, the pressure in the pressure tank fall and as it reached the pre-set cut in pressure of the switch the contacts close, starting the cycle over. These pressure switches are easily adjusted by following instruction inside the switch cover.

• Standard duty
• NEMA type 1 indoor enclosure
• 2 pole, rated 1-1/2 HP at 115 Vac, 2HP at 230 VAC
• Pressure Connection: 1/4 in. NPSF, pressure setting 30-50
• Adjustable cut in/out: cut out range 20-65 psig

The Zoeller M53 submersible pump is used for dewatering also known as sump or effluent. The pump has a 1-1/2 in. NPT discharge and passes solids measuring up to 1/2 in. This 0.3 HP pump was designed for residential/light commercial use. The pump has an integral float for easy installation.

• Float operated
• Corrosion-resistant, powder coated epoxy finish
• No sheet metal parts to rust or corrode
• Stainless steel screws, switch arm, guard and handle
• No screens to clog
• Watertight neoprene square ring between motor and pump housing
• Solid buoyant polypropylene float
• Entire unit pressure tested after assembly
• Carbon and ceramic shaft seal

Pro Series Standby Sump Pump Batteries are the best batteries for your backup sump pump because they are designed around the system. They are uniquely constructed with heavy duty plates to store more energy, provide longer run times and last longer in standby operation. The Pro Series B12-100 will provide years of dependable service without the hassle of having to add battery fluid or distilled water. The Pro Series B12-100 battery is compatible with all current Pro Series Pumps' backup and combination sump pump systems. The high storage capacity of the B12-100 battery can run any of the current Pro Series battery backup or combination sump pump systems intermittently for days.

• Maintenance free - no need to add battery fluid or distilled water
• Runs the pump longer for more hours per charge, intermittently for days and lasts longer in standby operation
• Compatible with all new Pro Series Pumps backup and combination sump pump systems
• Up to 55 hours of protection (based on a 10% duty cycle) on the PS-C33 combination and PHCC-2400 battery backup sump pump system
• Up to 70 hours of protection (based on a 10% duty cycle) on the PS-C22 combination and PHCC-1850 battery backup sump pump system
• Up to 110 hours of protection (based on a 10% duty cycle) on the PS-C11 combination and PHCC-1000 battery backup sump pump system
• Internally threaded terminals for easy installation
• Compatible with PS-C33 Item # 110613; PHCC-2400 Item # 110610; PS-C22 Item # 110612; PHCC-1850 Item # 110609;

The Cast Iron Sump Pump (CIS-33V) is a 1/3 HP all Cast Iron sump/effluent pump with a built-in vertical switch. It is designed with commercial grade materials to be an everyday pump for the professional contractor. It is built for consistent performance using a cool running, energy efficient permanent split capacitor (PSC) motor, with upper and lower sealed ball bearings giving extreme efficiency, high capacity, and quiet operation. The Cast Iron Sump Pump has a Cast Iron vortex impeller which can pass 1/2 in. solids. It pushes 3200 GPH at 10 feet while only pulling 5 Amps. Saving on the electric bill. It is thermally protected, has Stainless Steel fasteners, built-in air relief valve, and a carbon-ceramic shaft seal with a Buna-N-Seal for long life and proven reliability. Its integral vertical switch is compact, dependable and adjustable. If you are looking for an everyday pump, The Cast Iron Sump Pump is as tough as they come.

• 4,000 GPH (67 GPM) at 0 ft. lift; 3,200 GPH (53 GPM) at 10 ft. lift
• 1/3 HP pump with energy efficient permanent split capacitor (PSC) motor
• All Cast Iron construction
• Premium pump construction includes: upper and lower sealed ball bearings for ultra-quiet operation, stainless steel fasteners for long life, carbon / ceramic seals plus 1 Buna-N-Seal, thermal protection and 1-1/2 in. discharge
• Cast iron vortex impeller can pass 1/2 in. solids
• Removable strainer
• Built-in air relief valve to help prevent air lock
• 10 ft. power cord
• 3 Year limited warranty

The sump pump check valve is installed in the discharge pipe in sump pump applications. The internal check valve keeps pump fluid from flowing back into the sump basin. Includes Stainless Steel hose clamps.

• Full port valve design
• Flapper is seated on a 15 degree angle to reduce water hammer when pump is shut off
• Design of the flapper prevents debris from building up or getting caught which ensures proper seating
• Made of durable ABS
• Maximum temperature 140 degree F (60 degree C)

A Reliance Pump Tank is a must for any home that uses a pump to draw water from a well. We utilize a parabolic (cone-shaped) diaphragm that eliminates rubbing against itself or the tank wall, causing premature failure. A properly sized pump and pump tank will work as a team to meet your needs and deliver many years of dependable service.

• It ensures that your pump will run for at least one minute each time it cycles, as required by pump manufacturers
• It stores a supplemental water supply between pump cycles, to reduce the number of cycles throughout the day, and helps prolong pump life
• It helps maintain water pressure within your system, ensuring proper operation of your dishwasher and washing machine, and robust flow for showering and bathing
• Strong, flexible butyl diaphragm, powder-coated inner shell for permanent separation of air and water

Utility gauge for commercial and industrial markets. This pressure gauge has a 60 psi/bar scale and dry only. The dial size is 2 in. with a 1/4 NPT connection.

• 2 in. dial 1/4 NPT connection
• Accuracy 3-2-3% of span, ASME B40.1 grade B
• 60 psi/bar scale with no logo
• Black steel case with brass internals

The product is high quality and reliability and durability. The product is ease to use and attractive styling. The product is wide selection of product choices and great value.

• High tensile serrated arms
• Machined flange for support against tank wall
• Replaceable seals
• Dual inlet thread for connecting pipe, locknut

The Pro Series Pumps Deluxe Dual Float Controller (DFC2) is a premium product. It has a cage that protects the 2 micro reed switches. The second float acts as a fail-safe, providing redundancy. The dual float simply mounts to the discharge pipe, at the activation height of your choosing, with the included stainless steel hose clamp and is a piggy-back switch making it compatible with most sump pumps. For easy installation the float switch can be unplugged from the controller, the run time is adjustable (after the float drops), and the controller has universal mounting tabs. For superior user functionality, the DFC2 exercises the sump pump weekly to extend pump life and has a system operating light to display that the control box is operating properly. It also monitors pump and power conditions, sounds an alarm when problems are detected, and gives a visual light that pinpoints the remedy. Plus, it has a USB Data Port and Remote Terminal to connect to external devices, such as, one of the Pro Series Pumps Connect modules, a home automation system, or other device for remote notification.

• 2 float switches for added protection and redundancy
• Primary float switch activates the pump when water reaches the float
• Secondary float acts as a fail-safe for the first
• Sounds an alarm and alerts when power has failed, a pump or float problem is detected or the battery is low
• USB data port and remote terminal connect to external devices such as the PHCC Pro Series Pumps connect modules, home automation systems or other devices for remote notification
• Exercises the pump weekly to extend pump life
• Adjustable run time (after the float drops) from 5-45 seconds
• Adjustable to any activation height using included stainless steel hose clamp
• Float switch can be unplugged from controller for easy installation
• Optional high water accessory available (PS-WS)
• Warranty matches the Pro Series pump it is purchased with, otherwise a 1-year warranty applies

• Lead Free
• 1/4" MNPT
• 2" Face

This float valve has a dual inlet thread for connecting the pipe. It provides support against tank walls. It has a 1/2 in. MIP connection.

• Do not use this product with water systems that convey or dispense water for human consumption
• High tensile serrated arms
• Machined flange
• Replaceable seals

The M98 can be used for septic tank systems and to enhance flow step systems. This model can be used in residential or light commercial use for dewatering and transferring groundwater or effluent. The automatic pump is submersible with 1 ½ in NPT discharge.

• Corrosion-resistant, powder coated epoxy finish
• Durable cast iron construction
• Cast iron switch case, motor, pump housing and base
• No sheet metal parts to rust or corrode
• All castings are cast iron class 25-30 25000# tensile strength

The Pro Series Deluxe Vertical Switch Controller is one in a line of many Pro Series float switches available for sump, sewage and effluent applications. The Pro Series lineup gives customers more options to best fit their needs by having a Good, Better, Best philosophy. The Pro Series Deluxe Vertical Switch Controller (VSC2) is a premium product. It has a large float that rests vertically on a rod with minimal movement and sealed gold contacts for reliable high cycle operation. The vertical switch simply mounts to the discharge pipe at the activation height of your choosing with the included stainless steel hose clamp. The VSC2 is a piggy-back switch making it compatible with most sump, sewage, and effluent pumps. For easy installation the float switch can be unplugged from the controller, the run time is adjustable (after the float drops), and the controller has universal mounting tabs. For superior user features, the VSC2 exercises the pump weekly to extend pump life and has a system operating light to display that the control box is operating properly. It also monitors pump and power conditions, sounds an alarm when problems are detected and gives a visual light that pinpoints the remedy. Plus, it has a USB Data Port and Remote Terminal to connect to external devices, such as one of the Pro Series Pumps Connect modules, a home automation or security system or other devices for remote notification.

• Can be used in sump, sewage and effluent applications
• Mechanical float on rod
• Sounds an alarm and alerts when power has failed, a pump or float problem is detected or the 9V battery is low
• USB data port and remote terminal connect to external devices such as the Pro Series Pumps connect modules, home automation systems or other devices for remote notification
• Exercises the pump weekly to extend pump life
• Adjustable run time (after the float drops) from 5-45 seconds
• Adjustable to any activation height using included stainless steel hose clamp
• Float switch can be unplugged from controller for easy installation
• Minimal movement and sealed gold contacts for reliable high cycle operation
• Piggyback plug
• Easy installation
• Optional high water accessory available (PS-WS)
• Warranty matches the pro series pump it is purchased with, otherwise a 1 year warranty applies

Pressure Switches are used to control electrically driven water pumps, suitable for all types of pumps: jets, submersible, reciprocating, etc. Pressure switches are needed for rural water systems that rely on wells to supply their water. Water is pumped from the well or other water source to the pressure tank and as the tank fills the air in the tank becomes pressurized. When the pre-set pressure is reached, the pressure switch contacts open to stop the pump. When water is used, the pressure in the pressure tank falls and as it reaches the pre-set cut in pressure of the switch the contacts close, starting the cycle over. These pressure switches are easily adjusted by following instruction inside the switch cover.

• Standard duty
• NEMA type 1 indoor enclosure
• 2 pole, rated 1-1/2 HP at 115 Vac, 2HP at 230 Vac
• Pressure connection: 1/4 in. NPSF, pressure setting 20-40
• Adjustable cut in/out: cut out range 20-65 psig

Pump A Way is a durable and efficient hand pump for numerous applications inside and outside the home. The pump is manufactured of high quality impact and chemical resistant materials. Use for your entire pump project around the house. The Pump A Way is easy to use with each stroke pumping a whopping 32 oz. of liquid.

• Pump is manufactured of high quality impact and chemical resistant materials
• Some projects include removing waters from washing machines, dishwashers, sinks, showers, tubs, basins, valve boxes, condensation or drip pans, and sumps
• Pump removes a Gal. of liquid per 4 strokes
• Pump will not rust or corrode; pump is made of durable PVC
• Not made with NSF-14 (food grade) materials and is not recommended for food-based liquids

The Zoeller M63 is a 1/3 HP Premium Sump Pump. It comes with a lighted plug to insure that power is on at the receptacle. It has all cast iron construction. It has a 5 year warranty.

• 5 year warranty
• Viton seals
• Enhanced switch
• Heavy duty shaded pole motor

Zoeller M267, 1/2 HP Submersible Sewage, Effluent, Dewatering Pump. Automatic Switch, 115-Volt, with 10 ft. Cord. 2 in. Discharge and passes 2 in. Solid.

• Passes 2 in. spherical solid
• All cast iron construction
• Non-clogging vortex impeller
• Heavy duty split phase motor

The E7055-NS 1/2 HP All Cast Iron Sewage Pump provides superior performance and exceptional value. It features a high efficiency PSC (permanent split capacitor) motor which uses less amps. It also offers upper and lower sealed ball bearings which increase efficiency and allows for extremely quiet operation. The cast iron, vortex impeller can move 2 solids. The E7055-NS is water cooled, thermally protected and is rated for continuous duty. The cast iron construction is industrial grade leading to greater durability and better performance so, it can handle whatever you flush at it. These premium upgrades result in a powerful motor that offers the total package - superior efficiency, durability, longevity and performance.

• 5,340 GPH (89 GPM) at a 10 ft. lift
• 1/2 HP 7.0 Amp Energy efficient permanent split capacitor (PSC) motor
• Heavy duty all Cast Iron construction
• E7055-NS is pump only, no switch included; See below for recommended options
• Carbon / ceramic seals plus 1 Buna-N-Seal to protect the motor
• Upper and lower ball bearings for increased efficiency and ultra-quiet operation
• Water cooled (no cooling oil) thermally protected PSC motor
• Cast iron vortex impeller can pass 1/2 in. solids
• 2 in. Discharge for maximum output
• 10 ft. Grounded power cord
• Recommended Sump Vertical Switch Options: VSC2 (Best), Item # 3553973; VSC1.5 (Better) - Item # 3553972; VS (Good) - Item # 134659
• 3 Year limited warranty

• 3/4" solid steel plate door
• 10 3/4" x 11 1/8" door opening
• Three 1" diameter locking bolts
• Heavy duty dead bar behind hinge
• Doors are removable and interchangeable
• Carpeted interior floor
• Textured black finish
• 12 3/4"H x 14 1/8"W x 11 3/4"D
• 102 lbs.
• Made from high-quality steel for enhanced durability
• Heavy-duty dead bar prevents door removal during a forced entry attempt
• Three 1 in. Dia locking bolts help avert loosening
• Textured black finish offers an elegant appeal

• Fits 1" Or 1-1/4" Drop Pipe
• Comes with 2 Stainless Steel Clamps
• Made Of Deluxe Natural Rubber

Utility gauge for commercial and industrial markets. Black steel case, chrome bezel, copper alloy internals. 2 in. dial with 1/4 NPT, dry only case.

• 2 in. dial size with standard 1/4 NPT
• Black steel case with brass wetted parts
• Glass lens
• Accuracy 3-2-3% of span, ASME B40.1 grade B

The S3033-NS 1/3 HP Cast Iron / Stainless Steel Sump Pump is built with premium components for the professional contractor who wants the best. It is designed for peak performance using a water cooled, energy efficient permanent split capacitor (PSC) motor, with upper and lower sealed ball bearings giving extreme efficiency, high capacity, and ultra-quiet operation. It pushes a whopping 3000 GPH (50 GPM) at 10 ft. while only pulling 4 Amp, saving on the electric bill. It is thermally protected, has stainless steel fasteners, and dual carbon-ceramic shaft seals with a Buna-N-Seal for long life and proven reliability.

• 3,900 GPH (65 GPM) at 0 ft. lift; 3,000 GPH (50 GPM) at 10 ft. lift
• 1/3 HP, 4.0 Amp energy efficient permanent split capacitor (PSC) motor
• Heavy-duty cast iron / stainless steel construction
• S3033-NS is pump only, no switch included; see below for recommended options
• Carbon / ceramic seals plus 1 Buna-N-Seal to protect the motor
• Upper and lower ball bearings for increased efficiency and ultra-quiet operation
• Water cooled (no cooling oil) thermally protected PSC motor
• 1-1/2 in. discharge
• 10 ft. grounded power cord
• Recommended sump dual float options: DFC2 (best), item # 110607; DFC1.5 (better), item # 3553971; DFC1 (good), item # 134658
• Recommended sump vertical switch options: VSC2 (best), Item # 3553973; VSC1.5 (better) - item # 3553972; VS (good) - item # 134659
• 5-year limited warranty when purchased from and installed by a contractor, otherwise 3-year warranty

Leonard Lvc Thermostatic Assembly Less Cover & Pointer

• Includes all necessary hardware for hassle-free installation
• Sturdy stainless steel build ensures durability
• Brass finish adds an attractive aesthetic appeal
• Restores system to efficient performance

Red spirit filled economy thermometer for commercial and industrial applications. This thermometer has a 5 in. scale and 2/125 in. copper alloy stem. The temperature range is 40/280 degree F and 15/135 degree C.

• Scale size 5 in. (127 mm) white painted steel with black markings
• Accuracy +/-1 scale division
• Scale dual scale degree F and degree C temperature range 40/280 degree F and 15/135 degree C
• Well brass or steel - includes thermowell

Leonard Control Rod Group Pam-11 Pv-Cr

• Bronze build provides durability
• Ideal for repairing PAM-II-ST old style thermostatic valve
• Resists corrosion to ensure safety and reliability
• Restores system to efficient performance

The PS-C33 Combination Backup and Primary Sump Pump System comes pre-assembled with check valves installed, weep holes drilled, completely plumbed and mounted on a platform for quick and easy installation. The energy efficient primary AC sump pump will provide 3,000 GPH (50 GPM) at a 10 ft. lift and its caged dual float (DFC1.5) will deliver years of dependable service. The backup sump pump will protect from power outages, primary AC pump failure, primary AC float failure and provide extra capacity if needed. Plus, when maintenance is needed or a problem arises, it sounds an alarm, pinpoints problems, provides solutions on the control panel, and (using one of the Pro Series CONNECT Modules) can alert remotely via, text, email or in app notification. The backup system delivers 2,400 GPH (40 GPM) of pumping capacity at a 10 foot lift and will pump intermittently for days on a single charge of the Pro Series battery.

• Pre-assembled Pro Series S3033 sump pump, enhanced dual float switch and a Pro Series 2400 backup sump pump system
• AC primary sump pump capacity: 3,000 GPH (50 GPM) at 10 ft. lift
• Backup sump pump capacity: 2,400 GPH (40 GPM) at 10 ft. lift
• 2 sets of dual float switches for 4 times the protection
• Backup system monitoring controller detects irregularities, sounds an alarm, pinpoints problems and solutions on the control panel
• Alerts if AC power is out or the circuit breaker has tripped
• Monitors the battery and alarms if maintenance or replacement is needed
• USB data port and remote terminals connect to external devices such as a Pro Series connect module, home automation systems or other devices for remote notification
• Backup will assist primary sump pump if excessive amounts of water are entering the sump pit
• Battery backup system pumps intermittently for days on a single charge
• Automatically switches to battery power when AC fails
• 13 Amp charger automatically recharges and maintains the battery
• Designed for use with maintenance or maintenance free batteries
• Warning alarms can be temporarily silenced during a power outage
• Both primary and backup sump pump run weekly tests to exercise and check for proper operation
• 4-year warranty (when installed by a professional contractor, otherwise a 3-year warranty applies)
• Includes: backup pump, monitoring control box with dual float switch, charger, battery box, primary AC pump, enhanced dual float controller with caged dual float (DFC1.5), and 2 check valves pre-assembles on a sump foot

The product is high quality and reliability and durability. The product is ease to use and attractive styling. The product is wide selection of product choices and great value.

• High quality
• Reliable performance
• Durability
• Easy to install

A Reliance Pump Tank is a must for any home that uses a pump to draw water from a well. We utilize a parabolic (cone-shaped) diaphragm that eliminates rubbing against itself or the tank wall, causing premature failure. A properly sized pump and pump tank will work as a team to meet your needs and deliver many years of dependable service.

• It ensures that your pump will run for at least one minute each time it cycles, as required by pump manufacturers
• It stores a supplemental water supply between pump cycles, to reduce the number of cycles throughout the day, and helps prolong pump life
• It helps maintain water pressure within your system, ensuring proper operation of your dishwasher and washing machine, and robust flow for showering and bathing
• Strong, flexible butyl diaphragm, powder-coated inner shell for permanent separation of air and water

The product is high quality and reliability and durability. The product is ease to use and attractive styling. The product is wide selection of product choices and great value.

• High quality
• Reliability
• Durable construction
• Easy to install

Leonard Lvc Checkstop Repair Kit

• Includes all necessary hardware for easy repair
• Sturdy stainless steel build ensures durability
• Resists corrosion to ensure safety and reliability
• Restores system to efficient performance

We all know the old adage 'time is money'. The Pro Series Pumps' Quick Connect Main Pipe is a sump pump installation time saver. It is a pre-assembled discharge pipe that will make your sump pump installation quick and easy. No need to remove the pipe from the old pump. Save time from having to cut, drill, prime and glue the PVC pipe. Also, save on the cost of adapters, PVC, primer and cement. The Quick Connect Main Pipe will save you time and money.

• Makes sump pump replacement and installation easy
• No need to remove the pipe from the old pump
• Save time from having to cut, drill, prime and glue PVC pipe
• Save on cost of adapters, PVC, primer and cement
• Total length: 14.25 in.
• Pre-assembled with: 1-1/2 in. rubber coupling, 1-1/2 in. check valve, 1-1/2 in. NPT female adapter, pre-drilled weep hole, 1-1/2 in. discharge pipe and a 1-1/2 in. NPT threaded male adapter

Rugged thermoplastic body. Removes water down to 1/8 in. 1-1/4 in. discharge with garden hose adapter included. Oil-Cooled thermally protected motor, not for use in ponds with fish. 8 ft. power cord. Up to 1320 GPH. Shut-Off 25 ft. 1/4 HP submersible utility pump.

• Self-cleaning screen reduces maintenance
• Easy to use, includes 8 ft. power cord and garden hose adapter
• Cord wrap feature for organized storage
• 1-1/4 in. discharge

Heavy Duty Plated Bronze Volute For Durability. Convenient Transfer Pump For Household Use. Portable and Lightweight. Removes Water Down To 1/8 in. with Water Suction Attachment (Included). 115-Volt, 350 GPH.

• Non-submersible, multi-purpose pump is designed for emergency dewatering, draining aquariums, waterbeds and clogged sinks
• Pumps down to 1/8 in. when using the pud-l-scoop suction attachment that is included
• Self-priming at 6 ft. vertically, pump will push water 40 ft. high
• 3/4 in. GHT inlet and discharge
• Includes 6 ft. power cord, 6 ft. garden hose and pud-l-scoop suction attachment

The M264 is an automatic submersible sewage, effluent or dewatering pump. This submersible pump has a 1-1/2 in. NPT discharge. The pump can pass 3/4 in. spherical solids.

• Float operated, submersible (NEMA 6) 2 pole switch
• Durable cast iron construction - switch cap, motor and pump housing
• Engineered plastic base
• Stainless steel screws, bolts, handle, guard, arm and seal assembly
• Corrosion-resistant, powder coated epoxy finish
• Hermetically sealed, automatic reset thermal overload protection
• Upper and lower sleeve bearings running in bath of oil
• Minimum recommended basin size 18 in. x 30 in.

A Reliance Pump Tank is a must for any home that uses a pump to draw water from a well. We utilize a parabolic (cone-shaped) diaphragm that eliminates rubbing against itself or the tank wall, causing premature failure. A properly sized pump and pump tank will work as a team to meet your needs and deliver many years of dependable service.

• It ensures that your pump will run for at least one minute each time it cycles, as required by pump manufacturers
• It stores a supplemental water supply between pump cycles, to reduce the number of cycles throughout the day, and helps prolong pump life
• It helps maintain water pressure within your system, ensuring proper operation of your dishwasher and washing machine, and robust flow for showering and bathing
• Strong, flexible butyl diaphragm, powder-coated inner shell for permanent separation of air and water

A Reliance Pump Tank is a must for any home that uses a pump to draw water from a well. We utilize a parabolic (cone-shaped) diaphragm that eliminates rubbing against itself or the tank wall, causing premature failure. A properly sized pump and pump tank will work as a team to meet your needs and deliver many years of dependable service.

• It ensures that your pump will run for at least one minute each time it cycles, as required by pump manufacturers
• It stores a supplemental water supply between pump cycles, to reduce the number of cycles throughout the day, and helps prolong pump life
• It helps maintain water pressure within your system, ensuring proper operation of your dishwasher and washing machine, and robust flow for showering and bathing
• Strong, flexible butyl diaphragm, powder-coated inner shell for permanent separation of air and water

The ZOELLER 105 Drain Pump allows you to remove water where there is no gravity flow. It utilizes the proven M53 effluent pump and will pass 1/2 in. solids. Includes a 30-0181 Check Valve.

• Compact design for inside cabinets
• Passes 1/2 in. solids
• P-Trap can be placed inside basin for small spaces
• Includes check valve