This Undermount Group single compartment 18 in. x 21 in. deep undermount sink from JUST MANUFACTURING. Seamless die-drawn construction of 18-Gauge type 304 stainless steel. Interior and top surfaces polished to a non-porous Hand Blended Just Finish. Fully coated under-side insulates for sound and reduces condensation. Straight sided compartment with 1-3/4 in. radius corners provides greater capacity.

• 18-Gauge type 304 stainless steel
• Seamless die-drawn construction
• Maximum capacity straight-sided compartment with 1-3/4 in. radius corners
• Polished with a satin blended number 4-finish with highlighted bowl rim
• Fully coated underside
• Drain punch J-35 drain
• Conforms to ASME/ANSI A112.19.3M
• Deep bowl

Beauty of granite without the weight. Low maintenance Solid Surface Shampoo Bowl accommodates one user at a time, with contoured neck rest. Constructed of molded cast polymer densified solid surface material composed of polyester/acrylic resin, UV stabilizer and aluminum trihydrate, mineral fillers, and proprietary colorant. The Aquasurf solid surface material is resistant to stains, impact, and burns. Damage can be easily repaired with everyday cleaners and/or fine grit. Includes a standard bowl; stainless steel 3-1/2" basket strainer, stainless steel wall mounting bracket (wall mounting hardware), and stainless steel hole plug. Includes faucet.

Deluxe Stainless Portable Sinks are designed to provide hand washing capabilities in areas not normally equipped for it. Portable Wash-Ware units can be set up anywhere--inside or out. This model is supplied by an onboard 5 Gal. freshwater tank and operates via on-demand electric pump. The waste is collected in an onboard 6 Gal. tank. The single handle gooseneck faucet is sensor operated with battery and has a 0.5 GPM flow control.

• Swivel casters for smooth transit, roll it where you need it
• Integrated attachment points for paper towel holder, trash can accessories and soap holders
• Integrated ball-valve for easy shutoff when draining waste tank (not available on pump models)
• Hose models provide convenient hand-washing anywhere a hose can reach
• Plug-in electric pump model delivers water from a tank under cabinet if hose is out of reach
• Touchless sensor faucet reduces the spread of bacteria

This Undermount Group single compartment 16 in. x 20 in. deep undermount sink from Just Manufacturing. Seamless die-drawn construction of 18-Gauge type 304 stainless steel. Interior and top surfaces polished to a non-porous Hand Blended Just Finish. Fully coated under-side insulates for sound and reduces condensation. Straight sided compartment with 1-3/4 in. radius corners provides greater capacity.

• 18-Gauge type 304 stainless steel
• Seamless die-drawn construction
• Maximum capacity straight-sided compartment with 1-3/4 in. radius corners
• Polished with a satin blended number 4 finish with highlighted bowl rim
• Fully coated underside
• Drain punch J-35 drain
• Conforms to ASME/ANSI A112.19.3M
• Deep bowl

• Economical Bradstone weighs less than precast bowls
• Thermoset polyester bowl with stainless steel base
• Includes liquid soap dispenser, sprayhead with stainless steel support tube, spud with locknut and domed strainer, thermostatic mixing valve, stops, check, strainers, and flexible stainless steel supply lines
• Max flow rate 4.5 GPM
• Factory assembled
• 9" deep bowl, designed for heavy-duty hand washing
• Reliable foot, air, or infrared activations, or TouchTime mechanical metering
• An extremely durable plastic material made of reinforced thermosetting polyester resins
• Pre-assembled bowl and pedestal

Deluxe Stainless Portable Sinks are designed to provide hand washing capabilities in areas not normally equipped for it. Portable Wash-Ware units can be set up anywhere--inside or out. This model is supplied by an onboard 5 Gal. freshwater tank and operates via on-demand electric pump. The waste is collected in an onboard 6 Gal. tank. The single handle gooseneck faucet is sensor operated with battery and has a 0.5 GPM flow control.

• Swivel casters for smooth transit, roll it where you need it
• Integrated attachment points for paper towel holder, trash can accessories and soap holders
• Integrated ball-valve for easy shutoff when draining waste tank (not available on pump models)
• Hose models provide convenient hand-washing anywhere a hose can reach
• Plug-in electric pump model delivers water from a tank under cabinet if hose is out of reach
• Touchless sensor faucet reduces the spread of bacteria

BRADLEY WASHFOUNTAIN

• Suitable for heavy duty hand washing
• Air valve metering, infrared activation, or TouchTime® mechanical metering
• Terreon and TerreonRE are resistant to chemicals, stains, burns, and impact
• Accommodates up to 8 users at a time

This Undermount Group single compartment 18 in. x 21 in. undermount sink from JUST MANUFACTURING. Seamless die-drawn construction of 18-Gauge type 304 stainless steel. Interior and top surfaces polished to a non-porous Hand Blended Just Finish. Fully coated under-side insulates for sound and reduces condensation. Straight sided compartment with 1-3/4 in. radius corners provides greater capacity.

• 18-Gauge type 304 stainless steel
• Seamless die-drawn construction
• Maximum capacity straight-sided compartment with 1-3/4 in. radius corners
• Polished with a satin blended number 4-finish with highlighted bowl rim
• Fully coated underside
• Drain punch J-35 drain
• Conforms to ASME/ANSI A112.19.3M

This 5 Gal. fresh-water tank is designed as an accessory to the PS1000 series sinks. It provides fresh water source for the portable sink. This HDPE plastic tank is not imported.

• Fresh-water tank is designed as an accessory to the PS1000 series sinks
• Tank provides fresh water source for the portable sink
• Made of FDA approved high density polyethylene (HDPS) plastic
• 5 Gal. (18 l) capacity
• 63 mm neck finish
• Dimensions: 9-1/2 in. L x 9-1/2 in. W x 14-3/4 in. H
• Not UN rated
• Has a fixed handle
• Tank can be reconditioned and recycled
• Proudly made in the states

This 5 Gal. fresh-water tank is designed as an accessory to the EPS1000 series sinks. It provides fresh water source for the portable sink. This HDPE plastic tank is not imported.

• Fresh-water tank is designed as an accessory to the PS1000 series portable wash-ware sinks
• Tank provides fresh water source for the portable sink
• Made of FDA approved high density polyethylene (HDPS) plastic
• 5 Gal. (18 l) capacity
• 63 mm neck finish
• Dimensions: 9.46 in. L x 9.52 in. W x 14.68 in. H
• Not UN rated
• Has a fixed handle
• Tank can be reconditioned and recycled
• Proudly made in the states

This Undermount Group single compartment 16 in. x 18 in. undermount sink from JUST MANUFACTURING. Seamless die-drawn construction of 18-Gauge type 304-stainless steel. Interior and top surfaces polished to a non-porous Hand Blended Just Finish. Fully coated under-side insulates for sound and reduces condensation. Straight sided compartment with 1-3/4 in. radius corners provides greater capacity.

• 18-Gauge type 304-stainless steel
• Seamless die-drawn construction
• Maximum capacity straight-sided compartment with 1-3/4 in. radius corners
• Polished with a satin blended number 4-finish with highlighted bowl rim
• Fully coated underside
• Drain punch J-35 drain
• Conforms to ASME/ANSI A112.19.3M

This EPS back splash is designed as an accessory to the EPS1000 series sinks. It provides a backdrop to keep hand washing soap and paper towels within easy reach. Installation is simple to any EPS1000 series sink.

• Splash guard includes mounting hardware
• Helps to contain hand washing activity and keeps hand washing soap and paper towels within easy reach
• Splash guard is constructed of sturdy 18-Gauge, 304 type stainless steel and finished on all sides to a #4 satin finish
• Paper holder is constructed of sturdy 16-Gauge, 304 type stainless steel with the interior sand blasted and the exterior with a #4 satin finish
• Each bay holds a half ream of 10-1/4 in. x 3-5/8 in. folded sheets of C-fold paper towels
• Soap caddy is designed to securely hold a pump-style soap bottle of the user's choice
• 2-piece soap caddy is constructed of sturdy 16-Gauge, 304 type stainless steel, finished to a #4 satin finish
• Mounting hardware is included for the splash guard, paper holder and soap caddy
• Unit is easily mounted to the rear and sides of any EPS1000 series sink
• All sharp edges are broken

This Undermount Group single compartment 16 in. x 20 in. undermount sink from JUST MANUFACTURING. Seamless die-drawn construction of 18-Gauge type 304-stainless steel. Interior and top surfaces polished to a non-porous Hand Blended Just Finish. Fully coated under-side insulates for sound and reduces condensation. Straight sided compartment with 1-3/4 in. radius corners provides greater capacity.

• 18-Gauge type 304-stainless steel
• Seamless die-drawn construction
• Maximum capacity straight-sided compartment with 1-3/4 in. radius corners
• Polished with a satin blended number 4-finish with highlighted bowl rim
• Fully coated underside
• Drain punch J-35 drain
• Conforms to ASME/ANSI A112.19.3M

Murdock model GWJ85 series is a round pedestal mounted Hand Wash. It is barrier free and vandal resistant. It is made from 16-Gauge, type 304 stainless steel bowl mounted into a 12-Gauge, heavy-duty stainless steel support arm. The finish is a green powder coated. Unit shall be activated by a 9-Volt DC Hands Free Sensor Faucet. The faucet has a 0.5 GPM Laminar flow outlet to minimize splashing. This model complies with ANSI A117.1, Public Law 111-380 (NO LEAD), CHSC 116875; Fixture meets ADA requirements.

• ADA compliant (when properly installed)
• Resistant to sunlight, heat, moisture and wear
• Hands free sensor hand washing faucet
• Stainless steel construction for durability and easy cleaning
• Maintenance-friendly design
• Hands-free, battery-operated sensor faucet to reduce the potential spread of bacteria
• Laminar flow to minimize splash and provide the recommended flow for sufficient hand washing
• Cap over drain to reduce airborne germs

This splash guard is designed as an accessory to the PS1000 series sinks. It prevents splashing outside of the sink. Installation is simple with the eight fasteners provided.

• Splash guard includes mounting hardware
• Helps to contain hand washing activity
• Splash guard spans the width of the sink and wraps around the sides
• Easily mounted to the rear and sides of any PS1000 series sink
• 8-machine screws, washers and nuts are provided
• Constructed of sturdy 18-Gauge, 304 type stainless steel
• Exterior is a #4 satin finish
• Interior is a #4 satin finish
• All sharp edges are broken
• Protective vinyl is left adhered to the panels to provide protection during shipment and installation

BRADLEY WASHFOUNTAIN

This Undermount Group single compartment 18 in. x 24 in. deep undermount sink from JUST MANUFACTURING. Seamless die-drawn construction of 18-Gauge type 304 stainless steel. Interior and top surfaces polished to a non-porous Hand Blended Just Finish. Fully coated under-side insulates for sound and reduces condensation. Straight sided compartment with 1-3/4 in. radius corners provides greater capacity.

• 18-Gauge type 304 stainless steel
• Seamless die-drawn construction
• Maximum capacity straight-sided compartment with 1-3/4 in. radius corners
• Polished with a satin blended number 4-finish with highlighted bowl rim
• Fully coated underside
• Drain punch J-35 drain
• Conforms to ASME/ANSI A112.19.3M
• Deep bowl

This 6.5 Gal. waste-water tank is designed as an accessory to the EPS1000 series sinks. The intent is to provide wastewater source for the portable sink. This HDPE plastic tank is not imported.

• Waste-water tank is designed as an accessory to the EPS1000 series sinks
• Tank collects waste water source for the portable sink
• Made of FDA approved high density polyethylene (HDPS) plastic
• Durable, rust and dent-proof
• 6.5 Gal. (24 l) capacity
• Dimensions: 14-1/2 in. L x 8-1/2 in. W x 18-1/2 in. H
• Not UN rated
• Convenient back and top handles for easier pouring
• Spout is self-venting
• Tank can be recycled

This Undermount Group ADA compliant single compartment 18 in. x 18 in. undermount sink from Just Manufacturing. Seamless die-drawn construction of 18-Gauge type 304 stainless steel. Interior and top surfaces polished to a non-porous Hand Blended Just Finish. Fully coated under-side insulates for sound and reduces condensation. Straight sided compartment with 1-3/4 in. radius corners provides greater capacity.

• 18-Gauge type 304 stainless steel
• ADA compliant
• Seamless die-drawn construction
• Maximum capacity straight-sided compartment with 1-3/4 in. radius corners
• Fully coated underside
• Polished with a satin blended number 4 finish, with highlighted bowl rim
• Conforms to ASME/ANSI A112.19.3M

Murdock Model GWC75 series is a round wall mounted, vandal resistant Hand Wash. It has a 16-Gauge type 304 stainless steel bowl mounted into a 12-Gauge, heavy-duty stainless steel support arm. The finish is a green powder coated. Unit is activated by a 9-Volt DC Hands Free Sensor Operated Faucet with 0.5 GPM Laminar flow outlet to minimize splash. Hand Wash complies with ANSI A117.1, Public Law 111-380 (NO-LEAD), CHSC 116875. Fixture meets ADA Standing Person, and ADA Child requirements when mounted appropriately.

• Both child or adult ADA compliant (when properly installed)
• Resistant to sunlight, heat, moisture and wear
• Wall-mounted
• Barrier-free
• Stainless steel construction for durability and easy cleaning
• Maintenance-friendly design
• Hands-free, battery-operated sensor faucet to reduce the potential spread of bacteria
• Laminar flow to minimize splash and provide the recommended flow for sufficient hand washing
• Cap over drain to reduce airborne germs

This trash receptacle designed as an accessory to the PS1000 series sinks. It provides a convenient trash receptacle for used paper towels within easy reach. Installation is simple to any PS1000 series sink.

• Trash receptacle is an accessory to the PS1000 series sinks
• Conveniently mounted to the side of the sink for used paper towels
• Capacity is 7.3 Gal. (27.5 l)
• Receptacle is constructed of sturdy 18-Gauge, 304 type stainless steel
• Finished on all sides to a #4 satin finish
• 4-point mounting is very secure
• Mounting hardware allows the trash receptacle to be removed for cleaning
• Unit is easily mounted to the side of any PS1000 series sink
• All sharp edges are broken
• Corners of receptacle are rounded for safety

This Undermount Group single compartment 11 in. x 14 in. undermount sink from JUST MANUFACTURING. Seamless die-drawn construction of 18-Gauge type 304 stainless steel. Interior and top surfaces polished to a non-porous Hand Blended Just Finish. Fully coated under-side insulates for sound and reduces condensation. Straight sided compartment with 1-3/4 in. radius corners provides greater capacity.

• 18-Gauge type 304 stainless steel
• Seamless die-drawn construction
• Maximum capacity straight-sided compartment with 1-3/4 in. radius corners
• Polished with a satin blended number 4-finish with highlighted bowl rim
• Fully coated underside
• Drain punch J-35 drain
• Conforms to ASME/ANSI A112.19.3M

Eco Portable Wash-Ware units can be set up anywhere clean hands are needed, indoors or out. The design of the Eco Portable Wash-Ware unit allows for convenient flat-pack shipment with quick and easy setup. This model provides connections to 3/4 in. hoses for both fresh water and waste. The back of this unit is exposed, providing access for the hoses and connections. Casters are included. The single handle gooseneck faucet has a 0.5 GPM flow control.

• Portable hand-wash unit ships unassembled allowing for easy transport and comes ready to assemble
• Cabinet is fabricated of type 304 stainless steel with exposed surfaces polished to a #4 satin finish
• Access to plumbing and storage components is through rear of cabinet or removable front access panel
• Cabinet assembly is provided with a set of square rubber feet
• Countertop includes a marine edge to enable drainage around the rim of the integral trapezoidal lavatory bowl
• Water supply is from an existing plumbed, potable water source with a hose
• Wastewater is removed through a hose with 3/4 in. female hose thread outlet
• Handle faucet for manual activation
• Use at construction sites, screening centers, pop up testing areas
• For indoor and outdoor use
• Casters are included

This 5 Gal. waste-water tank is designed as an accessory to the PS1000 series sinks. It receives the wastewater from the portable sink. This HDPE plastic tank is not imported.

• Waste-water tank is designed as an accessory to the PS1000 series sinks
• Tank collects waste water source for the portable sink
• Made of FDA approved high density polyethylene (HDPS) plastic
• 5 Gal. (18 l) capacity
• 63 mm neck finish
• Dimensions: 9-1/2 in. L x 9-1/2 in. W x 14-3/4 in. H
• Not UN rated
• Has a fixed handle
• Tank can be reconditioned and recycled
• Proudly made in the states