Searched for "30181811"
The Fits Mansfield 210 and 211 Valve Seal is designed to fit both 2 in. 210 and 211 Mansfield flush valves. The exclusive longest lasting red rubber resists chlorine, bacteria, city water treatment, hard water, and well water. Easy to install, the 427 includes: (1) Valve Seal.
- Fits mansfield #210 and #211 flush valves
- Long lasting red rubber resists chlorine, bacteria, city water treatment, hard water, and well water
- Easy to install, mansfield flush valve seal is made of flexible rubber for a tight seal
- Flush valve seal dimensions measure, outside Dia: 10-5/16 in. I.D. measure: 9-1/2 in.
- Includes: (1) valve seal
- 5-year includes: (1) valve seal warranty
This vacuum breaker repair kit is made for REGAL and Royal valves manufactured prior to 1998. It installs with the following:
- Rubber Sleeve
- Plastic Insert
- Washer
Flush cartridge with duckbill and inlet screen. To be used with 1.6 and 1.0 GPF system. Includes all components required to tune-up systems.
- Fits most Flushmate systems
- Easy to install
- Complete tune up kits
- 1-year limited warranty
- Installation instructions included
- Before attempting any repairs turn off water and flush
Flushmate System 1.0 GPF for Mansfield 153 Tank, St Thomas, Peerless, Vitra and Western Pottery tanks. Includes vessels assemble and mounting hardware. Existing flush rod is to be reused from the replaced system.
- Complete vessel assembly
- Used with left or right hand toilet tanks
- OEM equipment, direct replacement
- 5 year limited warranty
- Easy to install
- Complete with hardware kit for mounting system to toilet tank
The Fluidmaster B212-10 replacement seal for Model #400A fill valves is a quick and easy way to restore your toilet fill valves performance. A direct replacement seal which fits the universal Fluidmaster 400A toilet fill valve, the #1 selling toilet fill valve worldwide. This part offers an easy way to solve common toilet fill problems without the need of purchasing a new toilet fill valve. Use this design to extend the life of an otherwise effective fill valve. Built with quality in mind this design comes with a 1 year warranty.
- Extend the lifespan of your 400A toilet fill valve
- Easy install
- Direct replacement for Fluidmaster model 200, 400 and 747 models
- Fix a broken fill valve without purchasing another valve
- 1 year warranty
A71 Sloan OEM Inside replacement cover. Old Or New Style Plastic Inside Covers. No Longer Necessary To Replace Old Style Outside Cover When Inside Cover Needs Replacing.
- A71
- Inside Plastic Cover
- Black
- Sloan OEM Part
Flushmate System 1.6 GPF Replaces 501-B Series for Toilet Tanks With Center Pushbutton. Designed to fit tanks with 3 in. Discharge Hole. Replacement system for all barrel shape vessels.
- Direct replacement for obsolete 501-b series
- Fits all OEM tanks equipped with 501-B, OR 501-A series
- 5 year limited warranty
- Easy to install
- Complete with mounting hardware for toilet tank
- Direct replacement system for obsolete systems and serial numbers -F3B
The Fluidmaster 703AP4 Toilet Fill Valve for Niagara Flapperless Toilets is a direct OEM replacement toilet fill valve. Designed to specifically to fit Niagara Flapperless Toilet models. This toilet fill valve helps increase your toilets performance with fast refill rates. Built for quick and easy installation, this fill valve is a cost effective DIY solution to common toilet fill problems. Built with quality and durability in mind, the 703 Amp features corrosive resistant materials, a 1 year warranty and a code approved anti-siphon operation. The Fluidmaster 703 Amp, designed to replace old or inefficient Niagara Flapperless Toilet fill valves, while optimizing your toilets refill performance.
- Preset fill rate helps deliver the correct amount of water to the toilet with each flush
- Easy-to-install, simple easy to follow directions included
- Direct replacement for Glacier Bay and Niagara flapperless toilets
- Built from corrosion-resistant materials
- Fast and effective DIY solution to common toilet fill problems
- 1 year warranty
Flushmate System 1.6 GPF, 503 series, all OEMs except KOHLER K-4404 Tank and Gerber 28-385 tank. Designed to be used with tanks with 2 in. discharge hole. For flush handle or pushbutton tanks.
- Most common replacement system
- Left or right hand tanks
- Reuse flush handle, rod, clips and screw
- 5-year limited warranty
- Includes mounting hardware for attaching to tank
- Before servicing turn off water and flush
Quiet, Exposed, Optima Plus, Battery Powered, Sensor-Activated, Single-Flush Retrofit Conversion Kits for Exposed Closet or Urinal Sloan flushometers. Sloans SFSM flushometers are activated via multi-lobular infrared sensor. The sensor sets the flushing mechanism when the user is detected and completes the flush when the user steps away.
- ADA compliant optima plus battery powered infrared side mount sensor for automatic no hands operation
- Chrome plated infrared sensor housing and non-hold-open true mechanical override full flush button
- 4 (four) size C batteries included, SFSM can be installed when handle is on left side or right side of valve
- Side mount units can be used on standard rough-in Sloan, Royal, Regal, Crown and Zurn flushometers
Oatey Flanged Clean-outs and Drains use an easy-leveling strainer mount to correct tilted drains. These drains solve the problem of drain installs knocked out of plumb after concrete is poured. Drains are constructed with durable brass strainers and clean outs.
- Use 1-package for a 1.6 Gal. toilet and 2-packages for a 3.5 Gal. toilet
- Non-toxic
- Easily flushes away with water once toilet repair is complete
- 0.6 oz.
- Gel solidifies water in 4-minutes to 5-minutes
- Helps prevent drips and leaks when removing toilet fixtures
Sloan REGAL Spud Coupling and Flange Assembly
- REGAL Spud Coupling and Flange Assembly
- Chrome
- Stainless Steel
- Genuine Sloan part
EZCarry horizontal siphon jet water closet carrier system with high performance waterway and 3 in. (76 mm) no-hub connections. System includes Dura-Coated cast iron main fitting with hydro-mechanically optimized sweep and extended 2 in. (51 mm) vent, adjustable gasketed faceplate, floor mounted pre-fab slotted foot supports with top anchoring pre-fab support base, heavy-duty 1/2 in. (13 mm) rear anchor tie down, fixture bolts, trim, stud protectors, bonded "Neo-Seal" gasket, and corrosion resistant, adjustable 3 in. (76mm) Dia x 6 in. (152 mm) coupling with integral test cap designed to increase flow velocity and line carry. EZCarry system complies with the requirements of ASME A112.6.1M up to a 500 lbs. (227 kg) static load rating.
- Propel waste up to 3-times farther, reducing the possibility of low-flow system clog for overall plumbing system protection
- Protect facilities from excessive loading with standard system design for loading up to 500 lbs.
- Reduce maintenance emergencies with carriers designed to optimize waste line carry
- Maintain a sanitary environment with wall-mounted fixture
F-5 slip joint gasket
- 1-1/2"
- Made from high-quality materials for durability
- Measures 1-1/2 in. Dia
- Compatible with the Sloan Flushometer
- Designed as an OEM replacement
Includes Override Button Assy., Lens Cover (Also Available Separately).
Chroma Plate vaccum Breaker Assembly for Sloan Manual and Sensor Operated exposed Sloan Flushometers, Toilet Applications.
- Vacuum Breaker
- 1 1/2 X 24 1/2
- Chrome Plate
- For a Water Closet
Sloan A-151-A Guide Assembly For 1.6 Closet 5301031
This flush valve replacement seal fits the American Standard Champion 4 tank Eljer Titan 4. It replaces original American Standardpart: 7301111-0070A. The seal is made of premium, longest lasting rubber and is backed by a 5 year warranty. The flush valve replacement seal fits the following Champion 4 models: 2002, 2018, 2023, 2067, 2219, 2221, 2058, 2074, 2076, 2367, 2368, 2369, 2625, 2627, 2738, 2733, and 2735.
- Exclusive longest lasting red rubber resists chlorine
- Replaces American Standard seal: 7301111-0070A
- Replaces Eljer Titan 4 seals
- Engineered materials resist chlorine
- 5 year warranty
- Easy installation
- Includes: (1) flush valve seal
Repair of flush valve components, rather than replacement of the entire unit, saves money and resources. Its metal parts, the 1 ½-inch spud nut and escutcheon, are constructed of cast brass with a chrome-plated finish. Its soft parts, the gasket and washer, are made with our chemical-resistant GO BLUE material. GO BLUE parts last up to 10x longer than the competitors', reducing maintenance costs and extending their lifespan. Zurn flush valve replacement parts and retrofit kits can be used to upgrade any diaphragm type flush valves. When you need a replacement part for repair or maintenance of a flush valve, trust Zurn for genuine, reliable parts.
- 1 ½" cast brass spud nut and escutcheon finished in polished chrome provide lasting durability
- 1 ½" gasket and washer made with our long-lasting GO BLUE material
- GO BLUE parts stand up to chloramine and other chemicals, lasting 10x longer than competitors' and keeping maintenance costs to a minimum
- For use with AquaVantage and AquaFlush flush valves
- Interchangeable with other manufacturers' flush valves
- Easy to install.
Tailpiece
- Chrome plated
- Used on all sloan Flushometers
- Brass construction
- adjustable
- Sloan OEM part
- Adjustable tailpeice
Sensor Replacement Kit
- Used on Optima Sensor activated faucets
- Black Plastic
- does not include sensor plate
- readily available
Repair of flush valve components, rather than replacement of the entire unit, saves money and resources. Designed to fit AquaVantage and AquaFlush exposed manual flush valves, Zurn's inside plastic cover (Part no. P6000-L) is made with our chemical-resistant GO BLUE material. GO BLUE parts last up to 10x longer than the competitors', reducing maintenance costs and extending their lifespan. Zurn flush valve replacement parts and retrofit kits can be used to upgrade any diaphragm type flush valves. When you need a replacement part for repair or maintenance of a flush valve, trust Zurn for genuine, reliable parts.
- GO BLUE parts stand up to chloramine and other chemicals, lasting 10x longer than competitors' and keeping maintenance costs to a minimum
- For use with AquaVantage and AquaFlush flush valves
- Interchangeable with other manufacturers' flush valves
- Ideal for commercial applications
- 3 Year Warranty
- Easy to install
Sloan G2 OPTIMA Plus Ebv-145-A Inside Cover Assembly
- Includes inner cover and solenoid
- High copper low zinc brass casting for increased resistance toward dezincification
- Fixed metering and no external volume adjustment to ensure water conservation
- Genuine Sloan Valve Company repair part
- Easy installation
- For use on G2 optima plus sensor flush valves
Protect the warranty on KOHLER products, always look for the KOHLER Genuine Parts logo. KOHLER Genuine Parts are designed by KOHLER engineers to maintain original product performance and promote product longevity. Made with premium materials for durability.
- KOHLER genuine part
- Spud assembly
- Engineered to promote product longevity
- Made with premium materials for enhanced durability
- 6 pieces
- Lifetime limited warranty