Tubular Connectors & Adapters
This washer is made of green rubber. The reinforced washer measures: .1875 in. thick, 1.5 inner diameter, 1.6875 in. outer diameter. Easy to install.
- Green rubber slip joint washer
- For either supply or drainage couplings
- Made of green rubber
- .1875 in. thick
- 1.5 in. inner diameter
- 1.6875 in. outer diameter
1-1/4 in. Slip Joint Washer is designed for use in tubular drain applications. The washer is made of durable rubber. The washer is excellent for use in the repair or replacement of sink strainers.
- Slip joint design
- Made of rubber
- Comes in 50-piece bag
- Easy installation
- Use when replacing or repairing a sink strainer
- Each 1-1/4 in. rubber slip joint washer is for use in tubular drain applications
Chrome Plated Or Plain Brass Finish. Available with Or Without Washers & Friction Rings.
No-Putty Gasket replaces plumbers putty. Creates a tight seal on all finishes and materials. Fits all standard drain attachments, quick and easy to install just peel and stick.
- Allows you to pre-fab fixtures
- Can be stacked if needed
- Won't dry out
- Stands up to the toughest commercial cleaners
- Does not stain or smudge
- No mess
1-1/2 in. Sink Drain Beveled Slip Joint Washers (2-Pack) are ideal for 1-1/2 in. slip joint connections in tubular drain applications. Durably constructed, each washer is built to last. Oatey products have earned the trust of plumbing professionals for over 100 years.
- For 1-1/2 in. slip joint connection
- Slip joint design makes washers easy to fix and replace
- Includes 2 leak-tight TPE washers
- Provides an excellent leak-tight seal for confidence
- 1-1/2 in. fitting size
- Beveled for the best fit
- 2-pack bag
- For use in tubular drain applications
- Highly durable, impact-resistant and easy to install
- Limited warranty
Thin, 3/16 in. thick I.D. 1-1/2 in. O.D. 1-3/4 in. Use when replacing or repairing a sink strainer. Slip joint design makes it easy to fix and replace.
- Made of rubber
- Slip joint design
- Easy installation
- Rubber slip joint washer is for use in tubular drain applications
- Pack of 50
- Designed to replace or repair sink strainers, each 1-1/2 in.
The product is high quality and reliability and durability. The product is easy to use and attractive styling. The product is wide selection of product choices and great value.
- Affordably priced
- Durable construction
- Easy to install with little tools required
- Easy to handle
- Fine surface
- Cost saving solution
1-1/4 in. Beveled Washers (2-Pack) are ideal for 1-1/4 in. slip joint connections in tubular drain applications. Package features 2 leak-tight washers. Oatey products have earned the trust of plumbing professionals for over 100 years.
- For 1-1/4 in. slip joint connection
- Slip joint design makes washers easy to fix and replace
- Pack includes 2 TPE reducing washers
- 1-1/4 in. fitting size
- Includes 2 leak-tight washers
- Provides an excellent seal
- Beveled for the best fit
- For use in tubular drain applications
- Highly durable, impact-resistant and easy to install
- Limited warranty
The product is well made with good surface treatment. The product is easy to use and attractive styling. It's easy to handle and install. The product is wide selection of product choices and great value.
- Fine surface
- No special tool required
- Cost saving solution
- Reliable performance
- Durable construction
- Great buy
The product is high quality and reliability and durability. The product is easy to use and attractive styling. The product is wide selection of product choices and great value.
- Chrome plated or plain brass finish
- Available with or without washers and friction rings
- Superior quality
- Easy installment
- Friendly use
- 100 pcs per bag
Thin, 1-1/2 in. x 1-1/4 in. 3/16 in. Thick I.D. 1-7/32 in., O.D. 1-23/32 in. to fit all your commercial and residential needs. Easy to install,.
- Ideal for white plastic, tubular slip joint connections
- Highly durable polypropylene plastic construction
- Super-easy installation
- Available in 1-1/4 in. and 1-1/2 in. inlet
- For use with slip joint connections
- Rubber made
1-1/4 in. x 1 -1/2 in. Slip Joint Reducing Washers (2-Pack) are for use in tubular drain applications. Durably constructed, each washer is built to last. Oatey products have earned the trust of plumbing professionals for over 100 years.
- Adapt to 1-1/2 in. and 1-1/4 in. pipe sizes
- Slip joint design makes washers easy to replace and fix
- Includes 2 leak-tight TPE reducing washers
- Provides an excellent leak-tight seal for confidence
- Adapts 1-1/4 in. to 1-1/2 in. piping
- 2-pack bag
- For use in tubular drain applications
- Highly durable, impact-resistant and easy to install
- Limited warranty
The slip joint washer has a tapered end and a flat end. When using PVC for plumbing connections, you are going to run across slip joints. A slip joint allows a raw end of pipe to slide into the threaded end of a fitting. The ends are connected and sealed with a combination of a slip nut and a slip washer.
- Cloth-inserted rubber
- Limited lifetime warranty
- Made of Polyethylene
- Beveled washer
- Helps to stop leaks
- White color
Keeney's 672PCBN coupling elbow features a 1-1/2 in. inlet and outlet. It's constructed of durable brass with a chrome plated finish for long-lasting use. All necessary nuts and washers are included. You can install with confidence knowing Keeney stands by its products with a Limited Warranty.
- 45 degree coupling for slip joint connection
- Inlet and outlet: 1-1/2 in.
- Durable 22-Gauge brass construction
- Includes heavy duty brass nuts and washers
- Designed for easy installation
- Chrome plated finish
KEENEY's 670PC straight coupling is designed for slip joint connections for easy installation. Its durable 22-Gauge brass construction offers a long-lasting solution to your plumbing needs. It features a 1-1/2-in. inlet and outlet and polished chrome finish for a high luster appearance in exposed installations. All necessary nuts and washers are included. You can install with confidence knowing KEENEY stands by its products with a Limited Warranty.
- Straight coupling with 1-1/2 in. inlet and outlet
- Slip joint connections for easy installation
- Durable brass construction for long-lasting use
- Polished chrome finish
- Includes all necessary hardware
- Limited warranty
No-Putty Gasket replaces plumbers putty, won't dry out. Self adhesive eliminates mess. Fits all standard drain attachments.
- Allows you to pre-fab fixtures
- Stands up to the toughest commercial cleaners
- Creates a tight seal on all finishes and materials
- Will not stain or smudge
- Easy to install
- No special tools required to use this item
The product is well made with good surface treatment. The product is easy to use and attractive styling. It's easy to handle and install. The product is wide selection of product choices and great value.
- Fine surface
- No special tool required
- Cost saving solution
- Reliable performance
- Durable construction
- Great buy
BASKET STRAINER WASHER 4-1/2" O.D.X 3-1/2" I.D. X 1/8" THICK
Connect your tubular drainage with this 1-1/2 in. x 1-1/2 in. Slip-Joint Nut and Washer. It is used to connect 1-1/2 in. OD tubular to 1-1/2 in. OD tubular. This item includes a rubber washer.
- Zinc die cast lock-nut & rubber washer
- Chrome finish
- Used to connect to 1-1/2 in. OD tubular
- For use with tubular drain applications
- Slip joint design
- Rubber washer included
KEENEY's straight coupling is designed for slip joint connections for easy installation. Its durable 22-Gauge brass construction offers a long-lasting solution to your plumbing needs. It features a 1-1/4 in. inlet and outlet and polished chrome finish for a high luster appearance in exposed installations. All necessary nuts and washers are included. You can install with confidence knowing KEENEY stands by its products with a Limited Warranty.
- Straight coupling with 1-1/4 in. inlet and outlet
- Slip joint connections for easy installation
- Durable brass construction for long-lasting use
- Polished chrome finish
- Includes all necessary hardware
- Limited warranty