The NCLX-5LX incorporates an inert thermal element coating that provides effective isolation from mineral deposits (liming). Cast bronze body with male inlet and female outlet, brass and stainless steel internal parts, silicone seat disc and stainless steel spring. Test lever standard. Temperature relief setting is 210 degree F (99 degree C).

• Provides effective isolation from mineral deposits and galvanic corrosion
• Completely automatic and reseats after temperature or pressure relief
• Every valve is tested for performance prior to shipping
• Listed by CSA and ASME
• Factory set at 150 psi
• Maximum temperature of 210 degree F
• Male inlet
• Female outlet
• Cast bronze body
• Brass and stainless steel internal parts

This 3/4 inch temperature and pressure relief valve is used to provide automatic temperature and pressure protection to hot water supply tanks and hot water heaters up to 105,000 BTU/hr. This valve is ASME rated and CSA listed. Temperature relief is 210 degree F (99 degree C),emperature and pressure protection to hot water supply tanks and hot water heaters up to 105,000 BTU/hr. It features a brass body with NPT male inlet and NPT female outlet connections, unique thermostat with special thermo-bonded coating, and a test lever. Model 100XL-8 is also available with 8 inch (200mm) extension thermostat. Series 100XL is ASME rated and CSA listed. Temperature relief is 210 degree F (99 degree C), Pressure relief range is 75 to 150psi (5.2 to 10.3 bar). Standard pressure settings are 75, 100, 125, or 150psi (5.27, 7.03, 8.79, or 10.55 bar).

• Required safety device on all water heaters
• Prevents water heater from blowing up
• Brass body construction
• Temperature relief is 210 degree F (99 degree C)
• Used to provide automatic temperature and pressure protection to hot water supply tanks and hot water heaters up to 105,000 BTU/hr
• ASME rated, CSA Listed
• Features unique thermostat with special thermo-bonded coating
• Includes test lever and stainless steel spring
• ANSI Z21.22 certified

This 3/4 inch lead free temperature and pressure relief valve is designed to provide automatic temperature and pressure protection to hot water supply tanks and hot water heaters up to 105,000 BTU/hr. This two-in-one relief valve provides a proven and cost effective means to protect against excessive temperature and pressure emergency conditions. It features a lead free copper alloy body with extended shank to accommodated up to 2 1/2 IN of insulation, NPT male inlet and NPT female outlet connections, a unique thermostat with special thermo-bonded coating, and test lever. The temperature relief is 210 degrees F (99 degrees C) and the pressure relief is set at 150 psi (10.3 bar).

• Lead free copper alloy body construction
• Extended shank for thick tank insulation up to 2 1/2 inches
• Extension thermostat with thermo-bonded coating
• Stainless steel spring
• Pressure relief range is 75 to 150 psi
• ASME rated, CSA Listed
• NPT male inlet and NPT female outlet connections
• Used to provide automatic temperature and pressure protection to hot water supply tanks and hot water heaters up to 105,000 BTU/hr
• ANSI Z21.22 certified
• Includes test lever and stainless steel spring

This drain tube is used on gas, electric, or oil fired residential water heaters to safely drain water discharged from the heater's temperature and pressure relief valve. It connects to the drain connection on a side-mounted relief valve that has up to 105,000 BTU/hr rating, and has a drop length of 48 in. It hand tightens to the relief valve outlet, requiring no special tools or fittings. It is UPC and IAPMO listed, and ASME A112.4.1 approved. It meets Department of Housing and Urban Development requirements.

• No special tool required to install
• Can be used on gas, electric or oil fired water heaters
• ASME approved
• Meets DOH requirements
• Used on gas, electric, or oil fired residential water heaters
• Safely drain water discharged from the heater's temperature and pressure relief valve
• Connects to the drain connection on a side-mounted relief valve that has up to 105,000 BTU/hr rating
• Drop length of 48 in.
• Hand tightens to the relief valve outlet, requiring no special tools or fittings
• UPC and IAPMO listed, and ASME A112.4.1 approved

The P1000AXL-150C Pressure Relief Valve is set at 150 psi and utilized on water heating storage vessels for protection against over-temperature or excessive pressure (not for steam service). Primarily used on storage tanks, P1000AXL materials include cast brass or bronze for the main valve body, quality stainless steel 300 series internals, stainless steel springs, and FDA approved, epoxy-coated copper tube probes. Multiple pressure relief settings and inlet/outlet connection options provide easy, ultra versatile installation capabilities, and the P1000AXL assembly shall be used where pressure only relief is required.

• Eliminates risk of over-pressure of storage tanks
• Epoxy-coating adds extra protection
• Pressure relief valve set at 150 psi
• CSA Compliance to ANSI Z21.22/CSA 4.4
• Certified to ASME Section IV by National Board
• Pressure relief valve settings of 30, 75, 125, and 150 psi offer versatility

The NCLX Temperature and Pressure Relief Valve incorporate an inert thermal element coating that provides effective isolation from mineral deposits (liming). It has male inlet and female outlet, brass and stainless steel internal parts, silicone seat disc and stainless steel spring. Test lever standard.

• Provides effective isolation from mineral deposits and galvanic corrosion
• Completely automatic and reseats after temperature or pressure relief
• Every valve is tested for performance prior to shipping
• Listed by CSA and ASME
• Factory set at 150 psi
• Maximum temperature of 210 degree F
• Male inlet
• Female outlet
• Cast bronze body
• Brass and stainless steel internal parts

The P1000AXL-30C Pressure Relief Valve is set at 30 psi and utilized on water heating storage vessels for protection against over-temperature or excessive pressure (not for steam service). Primarily used on storage tanks, P1000AXL materials include cast brass or bronze for the main valve body, quality stainless steel 300 series internals, stainless steel springs, and FDA approved, epoxy-coated copper tube probes. Multiple pressure relief settings and inlet/outlet connection options provide easy, ultra versatile installation capabilities, and the P1000AXL assembly shall be used where pressure only relief is required.

• Eliminates risk of over-pressure of storage tanks
• Epoxy-coating adds extra protection
• Pressure relief valve set at 30 psi
• CSA Compliance to ANSI Z21.22/CSA 4.4
• Certified to ASME Section IV by National Board
• Easy to install