Water Heater Accessories
The HOLDRITE expansion tank bracket is a secure and easy method for mounting an expansion tank. This universal bracket is constructed of galvanized stainless steel. Tanks of up to 5 Gal. and up to a 13 in. Dia can be supported.
- Secures expansion tank to wall
- Galvanized and stainless steel construction
- Supports tanks up to 13 in. Dia
- Supports tanks up to 5 Gal.
- Includes mounting bracket, 2 support straps and mounting screws
- Quick-release stainless steel bands
- Fast and easy installation
- Takes load weight off pipes
- HOLDRITE quick strap brand
- Water heater accessories
The Backer EHP Inc. copper based sheathed water heater available in both high and low watt densities provides a great solution for heating water with our completely tinned sheath and screw plug design to minimize galvanic action. Multiple water heater manufacturers now use this type of sheathed element as original equipment. Available replacements are the standard square flange and the straight thread screw plug.
- Sheath material platted copper sheath and platted steel screw plug
- Volt: 240-Volt
- Watt: 3500-Watt
- Design type high watt density hair pin (2 passes)
The Backer EHP Inc. copper based sheathed water heater available in both high and low watt densities provides a great solution for heating water with our completely tinned sheath and screw plug design to minimize galvanic action. Multiple water heater manufacturers now use this type of sheathed element as original equipment. Available replacements are the standard square flange and the straight thread screw plug.
- Sheath material platted copper sheath and platted steel screw plug
- Volt: 240-Volt
- Watt: 4500-Watt
- Design type high watt density fold back (2 passes)
Holdrite quick strap Water Heater Restraints are the most tested, approved and recognized water heater restraints in the market. The patented Quick Link system provides secure frontal attachment making quick strap a superior seismic mounting solution. Holdrite quick strap is preferred by DIY, DIFM and professional contractors because it provides the highest quality, safest and easiest installation.
- Water heater restraint to protect against natural disasters: earthquakes, tornadoes and hurricanes
- Easy to install for plumbers/homeowners
- Meets plumbing and real estate codes
- Patented quick link system provides secure frontal attachment
- 24 gauge galvanized steel
- California Division State Architect approval #98-018
- California Division State Architect approval #97-010
- UPC/IPC/IAPMO listed
- Up to 80 gallon water heater
- Hardware included
The Home-Flex 3/4 in. FIP x 3/4 in. FIP x 24 in. L Stainless Steel Corrugated Water Connector is designed for use in residential and commercial applications for water heater hookups. It is more flexible when compared copper corrugated products, due to its kink-free installation. Engineered of flexible lead free stainless steel, attached end fittings and built-in dielectric sleeves, it is the ideal choice for both homeowners and contractors. Extremely durable corrugated stainless-steel construction Built in dielectric sleeves negates the need for a separate dielectric union Easily adapts to water heaters with standard male pipe threads IAPMO certified.
- Extremely durable corrugated stainless-steel construction
- Built in dielectric sleeves eliminates the need for a separate dielectric union
- Easily adapts to water heaters with standard male pipe threads
- IAPMO certified
- 3/4 in. size
- 24 in. L; Minimum recommended bend radius: 2.5 in.
- 3/4" FIP connections
- Chrome plated brass supply nuts.
- Soft, thick rubber washer to create a tight seal. Follow instructions carefully and do not over tighten.
- Designed for use in residential and commercial applications for water heater hookups
- Conforms to ASME A112.18.6/CSAB125.6
This Camco 24 in. ID water heater drain pan is designed to be installed underneath a water heater. It is used to protect floors in the even of a leak or drips from the runoff tube. It is made of aluminum and will not rust or crack. It can be used for gas or electric water heaters.
- Included PVC drain fitting will fit 1 in. or 1.5 in. drain pipes
- Pre-cut side opening for drain fitting
- Electric or gas water heater use
- 24 in. I.D.
- 25 in. outside diameter
- Recyclable
- Manufacturer recommends drain pan to be 4 in. larger in diameter than the diameter of the water heater
- Will not rust or crack
- Helps prevent damage from water leaks
- Made from aluminum
The Home-Flex 3/4 in. FIP x 3/4 in. FIP x 18 in. L Stainless Steel Corrugated Water Connector is designed for use in residential and commercial applications for water heater hookups. It is more flexible when compared copper corrugated products due to its kink-free installation. Engineered of flexible lead free stainless steel, attached end fittings and built-in dielectric sleeves. It is the ideal choice for both homeowners and contractors. Extremely durable corrugated stainless-steel construction. Built in dielectric sleeves negates the need for a separate dielectric union Easily adapts to water heaters with standard male pipe threads IAPMO certified.
- Extremely durable corrugated stainless-steel construction
- Built in dielectric sleeves eliminates the need for a separate dielectric union
- Easily adapts to water heaters with standard male pipe threads
- IAPMO certified
- Corrugated stainless steel tubing is .01 in. / 25mm thick
- 18 in. L; Minimum recommended bend radius: 2.5 in.
- 3/4 in. FIP connectors
- Chrome plated brass supply nuts
- Soft, thick EPDM rubber washers to create a tight seal. Follow installation instructions carefully and do not over tighten.
- Designed for use in residential and commercial applications for water heater hookups
- For use with water only in accessible locations
- Conforms to ASME A112.18.6/CSAB125.6
Falcon Stainless Connector with 3/4 in. Female Iron Pipe by a 3/4 in. Female Iron Pipe and 24 in. in length. This Flexible Stainless Steel Corrugated connector is for use on both Water Softeners and Water Heaters. Easy to install.
- 304 series stainless steel
- Extremely flexible
- Will not corrode or rust
- High temp EPDM washer chlorine and chloramine resistant
- Highest flow rate in the industry - no restrictions
- 100% leak tested
- Supply line type
- 1.25 in. width, .4 lbs. wide
- Under lifetime warranty
- Silver color
HOME-FLEX 3/4 in. MIP x 3/4 in. FIP x 24 in. L Copper Corrugated Water Connector is designed for use in residential and commercial applications for water heater hookups. It is flexible, corrosion resistant and has attached end fittings with built-in dielectric collars. It is the ideal choice for homeowners and contractors alike.
- Extremely durable corrugated copper construction
- Built in dielectric sleeves negates the need for a separate dielectric union
- Easily adapts to water heaters with standard male pipe threads
- IAPMO certified
- 3/4 in. size; 24 in. length
- For water use only in accessible locations
- FIP connections; Minimum Bend Radius: 2.5 in.
- Zinc plated nuts
- Thick rubber washer to create a tight seal
- Designed for use in residential and commercial applications for water heater hookups
The Backer EHP Inc. copper based sheathed water heater available in both high and low watt densities provides a great solution for heating water with our completely tinned sheath and screw plug design to minimize galvanic action. Multiple water heater manufacturers now use this type of sheathed element as original equipment. Available replacements are the standard square flange and the straight thread screw plug.
- Sheath material platted copper sheath and platted steel screw plug
- Volt: 240-Volt
- Watt: 4500-Watt
- Design type high watt density fold back (2-passes)
This Camco 22 in. ID water heater drain pan is designed to be installed underneath a water heater. It is used to protect floors in the even of a leak or drips from the runoff tube. It is made of aluminum and will not rust or crack. It can be used for gas or electric water heaters.
- Included PVC drain fitting will fit 1 in. or 1.5 in. drain pipes
- Pre-cut side opening for drain fitting
- Electric or gas water heater use
- 22 in. inside diameter
- 23 in. outside diameter
- Recyclable
- Manufacturer recommends drain pan to be 4 in. larger in diameter than the diameter of the water heater
- Will not rust or crack
- Helps prevent damage from water leaks
- Fitting included
HOME-FLEX 3/4 in. FIP x 3/4 in. FIP x 18 in. L Copper Corrugated Water Connector is designed for use in residential and commercial applications for water heater hookups. It is flexible, corrosion resistant and has attached end fittings with built-in dielectric collars. It is the ideal choice for homeowners and contractors alike.
- Extremely durable corrugated copper construction
- Built in dielectric sleeves negates the need for a separate dielectric union
- Easily adapts to water heaters with standard male pipe threads
- IAPMO certified
- 3/4 in. size; 18 in. length
- For use with water only in accessible locations
- FIP connections; Minimum recommended bend radius: 2.5 in.
- Zinc plated nuts
- Thick rubber washer to create a tight seal
- Designed for use in residential and commercial applications for water heater hookups
- Conforms to ASME A112.18.6/CSAB125.6
The Backer EHP Inc. copper based sheathed water heater available in both high and low watt densities provides a great solution for heating water with our completely tinned sheath and screw plug design to minimize galvanic action. Multiple water heater manufacturers now use this type of sheathed element as original equipment. Available replacements are the standard square flange and the straight thread screw plug.
- Sheath material platted copper sheath and platted steel screw plug
- Volt: 240-Volt
- Material type constructed of rubber material
- Design type high watt density fold back (2 passes)
The Camco plastic water heater drain pan helps protect finished surfaces in the event of a water heater leak. Durable plastic construction is flexible and crack and corrode resistant. Made for use with electric water heaters. Comes with fitting attached.
- Made from durable polypropylene plastic
- Will not corrode or crack
- 26 in. ID
- 28 in. OD
- 1-1.5 in. PVC fitting included
- Pre-cut side outlet
- Recyclable
- Non-toxic
- Black finish
- Use with electric water heaters only
This thermostat is designed to replace Therm-O-Disc style 59T lower thermostats on residential water heaters. It has adjustable temperature settings, pre-set at 120 degree F by the manufacturer. This item is CSA and UL Listed from the USA and Canada. Meets specification lengths AO Smith, Bradford White, Craft master, GE, GSW, Kenmore, Maytag, Reliance, Richmond, Rheem, Russ, Sears, State and Whirlpool brand water heaters.
- UL and CSA listed
- 1-year limited warranty
- Energy efficient range setting
- Application voltage 240-Volt/208-Volt/277-Volt/120-Volt/480-Volt
- Comes from factory set at 120 degree
- Temperature settings can be adjusted from 90 degree to 150 degree
- Lower thermostat
- Wiring diagram included
- For electric water heaters
- Built in safety switch to prevent over heating
The Fluidmaster B1H24 Braided Stainless Steel Water Heater Connector is a top choice to replace and upgrade your water heater supply line. Showcasing a 24 in. length and fitting 3/4 in. FIP x 3/4 in. FIP fittings. Fluidmaster water heater water supply connectors are built to last. Made of a tough polymer core covered with braided stainless steel wire, these connectors come with a 5-year warranty. Featuring exceptional flexibility for fast and easy installation, with easy to grip and durable nickel-plated brass hex nuts, and extra-long and crimped stainless ferrules. They won't kink or crease even in tight spaces. Lead free and meeting all code requirements for flexible water connectors.
- Trust Fluidmaster to replace old, or faulty water heater connectors with a flexible upgrade
- Easy to install
- Durable braided stainless steel build
- Highly flexible to resist kinks and creases in tight spaces
- Heavy duty nickel plated brass hex nuts are easy to grip
- 3/4 in. F.I.P. x 3/4 in. F.I.P. fitting
- 24 in. L
- Lead free and meeting all code requirements
- 5-year warranty
SharkBite Max Elbow 1/2". Can be rotated after installation. No tube liner required for PEX. Mfg #UR248
- Can Be Installed On Wet Lines And Pressure Tested Immediately.
- Stainless steel retainer adds strength and durability.
- High-performance DZR lead-free brass body.
- No special tools, crimping, soldering or glue required.
This thermostat is designed to replAce Therm-O-Disc style 59T/66T thermostats on residential water heaters. It has adjustable temperature settings, pre-set at 120 degree by the manufacturer. This item is CSA and UL Listed for the USA and Canada. Meets specification lengths for most American, AO Smith, Bradford White, Craftmaster, GE, GSW, Kenmore, Maytag, Reliance, Richmond, Rheem, Russ, Sears, State and Whirlpool brand water heaters.
- UL and CSA listed
- I year limited warranty
- Energy efficient range setting
- Application voltage 240/208/277/120/480
- Factory pre-set at 120 degree F
- Adjustable temperature settings
- Therm-o-disc style
- Built-in safety switch to prevent overheating
- Bulk item - no packaging
- Universal replAcement part
The Camco 11460 22 in. Water Heater Drain Pan is used under an electric water heater to prevent damage to floors or other finished areas in the event of a water heater leak or runoff from the release valve tube. It is made of durable polypropylene plastic that will not corrode or crack. There is a pre-cut side outlet for the drain fitting used to plumb any water away from finished surfaces. Recyclable and non-toxic.
- 22 in. I.D.
- 24 in. O.D.
- For electric water heater only
- Side opening for drain fitting
- Includes 1.0 in. x 1.5 in. CPVC drain fitting kit
- Durable polypropylene construction
- Will not rust, corrode or crack
- Black color
- Tools required for drain installation
- 1-year limited warranty
Cleans heater coils thoroughly. Restores pressure and circulation in minutes, with no strong odor. Calci-Free is a unique, economical, biodegradable cleaner containing a combination of organic, inorganic and corrosion inhibiting ingredients. It is easy to use and works twice as fast as other cleaners. Use it for routine cleaning to remove calcium and other solid deposits from heating coils.
- Calci-Free tankless water heater flush cleans heater coils thoroughly, restores pressure and circulation in minutes, with no strong odor, Calci-Free is a unique, economical, biodegradable cleaner containing a combination of organic, inorganic and corrosion inhibiting ingredients, it is easy to use and works twice as fast as other cleaners
- More effective than vinegar
- Easy to use no strong odor
- Cleans heat exchanger fast
Protection Plus is a 4-year warranty extension kit to be used for new Rheem water heater installations. This item is sold in package quantity of 1 and provides a label to be placed on the water heater. With just 2 water heaters, you have the option of selling 4 warranty periods which will effectively have 4 water heaters in little more space than 2.
- 6-year limited tank warranty becomes 10-year
- 8-year limited tank warranty becomes 12-year
- Provides up to 135% additional anodic protection
- For use on all Rheem residential models except manufactured housing, marathon, point-of-use, hybrid electric, table top, condensing gas models, tankless or thermal expansion tanks
- Great up-sale opportunity
- High quality magnesium anode rod with plastic lined nipple (hot side)
- Plastic lined nipple (cold side)
- Brass 3/4 in. to 1 in. adaptor
- Warranty certificate with instructions
- Protection Plus label to be placed on water heater
This Camco 26 in. ID water heater drain pan is designed to be installed underneath a water heater. It is used to protect floors in the even of a leak or drips from the runoff tube. It is made of aluminum and will not rust or crack. It can be used for gas or electric water heaters.
- Included PVC drain fitting will fit 1 in. or 1.5 in. drain pipes
- Pre-cut side opening for drain fitting
- Electric or gas water heater use
- 26 in. inside diameter
- 27 in. outside diameter
- Recyclable
- Manufacturer recommends drain pan to be 4 in. larger in diameter than the diameter of the water heater
- Will not rust or crack
- Helps prevent damage from water leaks
- Made from aluminum
This drain pan is to be used under gas or electric water heaters to prevent damage to floors or other finished surfaces in the event of a water heater leak. It is made from aluminum which is recyclable and will not corrode. CPVC drain fitting is included.
- For gas or electric water heaters
- Includes one 1-1/2 in. CPVC fitting
- Pre-cut side opening for drain fitting
- 24 in. I.D.; 25 in. O.D.
- Can be recycled
- Recommend pan ID size should be 2 in. larger than water heater diameter
- Manufactured from aluminum
- Silver metallic finish
- For use with tank water heaters
- Helps protect your floors from damage due to water heater leaks
The Camco Polypropylene Side-Mount Runoff Tube is designed for use with a side-mounted relief valve. The tube safely carries away steam and scalding hot water in the event of accidental valve activation. Made from thermoplastic polypropylene. Tube can be cut to desired length needed.
- Attaches to the discharge outlet of a temperature- and pressure-relief valve to safely carry away steam and hot water in the event of accidental valve activation
- Can be directed to the water heater pan if the pan is plumbed to a drain or other disposal area
- Guards against accidental flooding and expensive repair
- Made of polypropylene with a zinc-plated steel fitting
- Rigid surface is ideal for gripping with standard wrenches
- Easy to install with the included gasket
- Do not connect runoff directly to a discharge drain unless an air gap is provided
- Side mount
- Can be cut to desired length
- 58 in. long