Water Heater Accessories
This 26 in. ID water heater drain pan is designed to be installed underneath a water heater. It is used to protect floors in the even of a leak or drips from the runoff tube. It is made of polypropylene plastic and will not corrode or crack. It can be used for electric water heaters. Sold in carton of 6.
- 6-pack
- Made of polypropylene plastic
- Comes with PVC fitting
- Will not corrode or crack
- Recyclable
- Non-toxic
- 26 in. I.D.
- 28 in. O.D.
- For electric water heaters
- Pre-cut side opening for drain fitting
- Manufacturer recommends drain pan to be 4 in. larger in diameter than the diameter of the water heater
The plastic hood termination can be used to conceal PVC/CPVC piping to provide a clean, sleek finish to your venting system. The product itself is made out of PVC material. It is ideal for horizontal terminations.
- 3 in. PVC compatible
- 4 in. PVC compatible
- Not approved for Canada
- 1 year warranty
- 3 in. CPVC compatible
- 4 in. CPVC compatible
- Weather resistant
- For horizontal terminations
- Prevents heavy rain and snow entering water heater
- Prevents debris from entering water heater
The Rheem PROTECH Gas Control Replacement Kit contains everything that you need to replace the Gas Valve on your Rheem gas water heater. The part is required anytime the cag control is damaged or needs replacing. The gas valve kit ensures the safe and reliable operation of your gas water heater.
- Direct replacement for Rheem, Ruud and Richmond gas water heaters
- Works on models: PROG50-42N RH67 PV
- Kit includes: gas valve and instructions
- Use only on Rheem water heaters
- Genuine OEM replacement kit
- Robust design
- Made of steel and plastic
- Repair your water heater with peace of mind using genuine Rheem parts
- 1 year limited warranty
- California residents see prop 65 warnings
The Robertshaw 110 Series Water Heating Gas Valves are designed for universal replacement applications in water tanks. All models feature a built-in, non-cycling Energy Cut-Off (ECO) system to shut off all gas to the water heater in case of excessive water temperatures. The ECO is designed to detect over-temperature conditions and to open. Once opened, the control will not function and a new replacement will be required.
- Outlet size: 1/2 in. inverted flare
- Pressure regulation: 4.0 in. WC natural gas
- Shank length: 1-3/8 in.
- Inlet size: 1/2 in. pipe
- Flow setting: 45,000 BTU
- Temperature: 160 degree F (71 degree C)
- Gas type: NG
- Sensing element: 5-1/2 in.
- Pressure tap: manifold
- Mounting: 3/4 in. NPT
- Domestic, commercial and recreational vehicle applications
Rheem's Burner Assembly Replacement Kit contains everything that you need to replace the burner assembly on your Rheem gas water heater. The kit is required anytime the burner assembly needs to be replaced. Kit ensures safe and reliable operation.
- For use on Rheem and Ruud water heaters
- Works on PROG50-42N RH67 PV
- Genuine OEM replacement part
- 1-year limited warranty
- Burner assembly is made from steel and other durable, high temperature materials
- Fix your water heater with peace of mind using genuine Rheem parts
- Easy installation
- Developed for use with Rheem water heaters
- California residents see prop 65 warnings
- Kit includes burner, pilot, gas supply tube and igniter
Lower T-Stat, 1-19/32" X 2-1/8".
OEM replacement gas valve for the Series 100 Premier Plus residential propane water heaters used on models with 30 gallons tanks through 50 gallon tanks. Can also be used on equivelant American & U.S. Craftmaster brands Series 100 units. Made to fit on units with 1" insulation. Gas valve made by Honewell.
OEM replacement gas valve for the Series 100 Premier Plus residential natural gas water heaters used on models with 30 gallons tanks through 50 gallon tanks. Can also be used on equivelant American & U.S. Craftmaster brands Series 100 units. Made to fit on units with 1" insulation. Gas valve made by Honewell.
The Camco flared dip tube is a non-metallic tube that directs incoming cold water into a water heater. It directs water to the bottom of the tank so that the water in the upper part of the tank will stay warm. It can be cut to desired length if too long. The gasket is included.
The Camco flared dip tube is a non-metallic tube that directs incoming cold water into a water heater. It directs water to the bottom of the tank so that the water in the upper part of the tank will stay warm. It can be cut to desired length if too long. The gasket is included.
- Water inlet dip tube
- 52 in. vertical length
- Can be cut to desired length
- Gasket included
- No-break poly resin
- PEX material
- Directs cold water to the bottom of the water heater
- Flared opening
- Non-metallic
- Anti-siphon hole breaks damaging siphon action
Rheum's Burner Assembly Replacement Kit contains everything that you need to replace the burner assembly on your Rheem gas water heater. The kit is required anytime the burner assembly needs to be replaced. Kit ensures safe and reliable operation.
- For use on Rheem and Ruud water heaters
- Works on PROG50-38N RH60
- Genuine OEM replacement part
- 1-year limited warranty
- Burner assembly is made from steel and other durable, high temperature materials
- Fix your water heater with peace of mind using genuine Rheem parts
- Easy installation
- Developed for use with Rheem water heaters
- California residents see prop 65 warnings
- Kit contains everything that you need to safely replace the burner assembly on your Rheem or Ruud water heater
- Water Heater Thermopile
- For 100 And 101 Series
- High Quality Product
- Kit Contains Two 18" Water Connectors, Two 3/4" Dielectric Nipples, One Teflon Tape and Two 7/8" OD X 3/4" Mip Compression Adapters
The Heat Exchanger needs to be flushed to prevent damage from Scale Build-up. Isolation Valves allow for full diagnostic testing and easy flushing of the system. Please refer to the Owners Guide or Installation Manual for more information regarding this procedure.
- Easy to install
- Copper material
- Compatible with:NR501 series NR662 series NR83 series NR981 series NRC661 series NRC711 series NRC98 series NRC1111 series NRC663 series NC380 series (F only)
- Will give the install a nice and clean finished look
- 3/4 in.
- Sweat ISO valves
- Hot water valve included
- Cold water valve included
- Installation manual inside box
- 500,000 BTu/hr pressure relive valve
Upper T-Stat with High Limit 2-Elements, 1-19/32" X 3-27/32".
Use this product on appropriate gas water heaters. Please follow instructions carefully. Instructions should be included with products.
- Please refer to instructions for installation
- If you can't install this product contact a qualified person
- Follow safety precautions
- 1 year limited warranty
- Metal construction
- Replacement thermostat
- Durable
- Long lasting
- Comes in a single
- Gray finish
OEM replacement gas valve for the Series 100 Premier Plus residential natural gas water heaters used on models with 30 gallons tanks through 50 gallon tanks. Can also be used on equivelant American & U.S. Craftmaster brands Series 100 units. Made to fit on units with 2" insulation. Gas valve made by Honewell.
The Rheem PROTECH Gas Control Replacement Kit contains everything that you need to replace the Gas Valve on your Rheem gas water heater. The part is required anytime the cag control is damaged or needs replacing. The gas valve kit ensures the safe and reliable operation of your gas water heater.
- Direct replacement for Rheem, Ruud and Richmond gas water heaters
- Fits model: PROG50S-40N RH61
- Kit includes: Gas Valve and Installation Instructions
- Use only on Rheem water heaters
- Genuine OEM replacement kit
- Robust design
- Made of durable steel and plastic
- 1 year limited warranty
- Repair your water heater with peace of mind using genuine Rheem parts
- California residents see prop 65 warnings
THERMOSTAT WATER HEATER UPPER - CARDED
NORITZ flex vent 2 in. kit, 35 ft. for EZ98DV and EZ111DV. This kit is for installation through existing B-vent. It contains step-by-step start up guide.
- Kit is only for vertical terminations
- Optional venting for EZ series heaters
- Flexible polypropylene venting included
- Additional accessories to complete the venting application
- Up to 35 ft.
- Easy to install
- Cuts installation time in half
- Contains rain cap
- Not allowable for horizontal terminations
- Vent through existing B-vent
Precisely engineered accessories can add even more reliability, convenience and flexibility to Rinnai Tankless Water Heaters. With Rinnai Common Venting, up to eight tankless water heater units share the same vent system. This allows for significantly fewer wall or roof cuts, less labor, and longer vent lengths than ever possible with single-unit tankless water heater venting.
- Concentric venting reduces install time and costs
- Engineered concentric venting especially for gas appliances
- Easy assembly/adjustment
- Concentric venting allows for secure connection
- 5 in. condensing horizontal termination kit 21 in
- HE series tankless water heaters (Condensing)
- White finish
- Package quantity: 1
- Plastic construction
- 1-year limited warranty
- *Note. Rinnai is changing the language in its warranty terms and conditions found in the current User Installation manuals. The existing statement will be replaced by the following: "This Limited Warranty applies only to products that are installed in the United States and Canada. Improper installation may void this Limited Warranty. It is recommended that a trained and qualified professional who has attended a Rinnai installation training class complete your installation." All warranties (old or new manual) will be honored as written above.
HOME-FLEX 3/4 in. MIP x 3/4 in. FIP x 15 in. L Copper Corrugated Water Connector is designed for use in residential and commercial applications for water heater hookups. It is flexible, corrosion resistant and has attached end fittings with built-in dielectric collars. It is the ideal choice for homeowners and contractors alike.
- Extremely durable corrugated copper construction
- Built in dielectric sleeves negates the need for a separate dielectric union
- Easily adapts to water heaters with standard male pipe threads
- IAPMO certified
- 3/4 in. size
- 15 in. L; Minimum recommended bend radius: 2.5 in.
- Sweat x FIP connections
- Zinc plated nuts
- Thick rubber washer to create a tight seal
- Designed for use in residential and commercial applications for water heater hookups
Use this product on appropriate gas water heaters. Please follow instructions carefully. Instructions should be included with products.
- Please refer to instructions for installation
- If you can't install this product contact a qualified person
- Follow safety precautions
- 1 year limited warranty
- Ceramic material
- Replacement gas valve
- Durable
- Long lasting
- Comes in a single
- White finish
Use this product on appropriate gas water heaters. Please follow instructions carefully. Instructions should be included with products.
Use this product on appropriate gas water heaters. Please follow instructions carefully. Instructions should be included with products.
- Please refer to instructions for installation
- If you can't install this product contact a qualified person
- Follow safety precautions
- 1-year limited warranty
- Metal construction
- Replacement thermostat
- Durable
- Long lasting
- Comes in a single
- Gray finish
