This Camco 22 in. ID water heater drain pan is designed to be installed underneath a water heater. It is used to protect floors in the even of a leak or drips from the runoff tube. It is made of aluminum and will not rust or crack. It can be used for gas or electric water heaters.

• Included PVC drain fitting will fit 1 in. or 1.5 in. drain pipes
• Pre-cut side opening for drain fitting
• Electric or gas water heater use
• 22 in. inside diameter
• 23 in. outside diameter
• Recyclable
• Manufacturer recommends drain pan to be 4 in. larger in diameter than the diameter of the water heater
• Will not rust or crack
• Helps prevent damage from water leaks
• Fitting included

This thermostat is designed to replace Therm-O-Disc style 59T lower thermostats on residential water heaters. It has adjustable temperature settings, pre-set at 120 degree F by the manufacturer. This item is CSA and UL Listed from the USA and Canada. Meets specification lengths AO Smith, Bradford White, Craft master, GE, GSW, Kenmore, Maytag, Reliance, Richmond, Rheem, Russ, Sears, State and Whirlpool brand water heaters.

• UL and CSA listed
• 1-year limited warranty
• Energy efficient range setting
• Application voltage 240-Volt/208-Volt/277-Volt/120-Volt/480-Volt
• Comes from factory set at 120 degree
• Temperature settings can be adjusted from 90 degree to 150 degree
• Lower thermostat
• Wiring diagram included
• For electric water heaters
• Built in safety switch to prevent over heating

This thermostat is designed to replAce Therm-O-Disc style 59T/66T thermostats on residential water heaters. It has adjustable temperature settings, pre-set at 120 degree by the manufacturer. This item is CSA and UL Listed for the USA and Canada. Meets specification lengths for most American, AO Smith, Bradford White, Craftmaster, GE, GSW, Kenmore, Maytag, Reliance, Richmond, Rheem, Russ, Sears, State and Whirlpool brand water heaters.

• UL and CSA listed
• I year limited warranty
• Energy efficient range setting
• Application voltage 240/208/277/120/480
• Factory pre-set at 120 degree F
• Adjustable temperature settings
• Therm-o-disc style
• Built-in safety switch to prevent overheating
• Bulk item - no packaging
• Universal replAcement part

The Camco 11460 22 in. Water Heater Drain Pan is used under an electric water heater to prevent damage to floors or other finished areas in the event of a water heater leak or runoff from the release valve tube. It is made of durable polypropylene plastic that will not corrode or crack. There is a pre-cut side outlet for the drain fitting used to plumb any water away from finished surfaces. Recyclable and non-toxic.

• 22 in. I.D.
• 24 in. O.D.
• For electric water heater only
• Side opening for drain fitting
• Includes 1.0 in. x 1.5 in. CPVC drain fitting kit
• Durable polypropylene construction
• Will not rust, corrode or crack
• Black color
• Tools required for drain installation
• 1-year limited warranty

This drain pan is to be used under gas or electric water heaters to prevent damage to floors or other finished surfaces in the event of a water heater leak. It is made from aluminum which is recyclable and will not corrode. CPVC drain fitting is included.

• For gas or electric water heaters
• Includes one 1-1/2 in. CPVC fitting
• Pre-cut side opening for drain fitting
• 24 in. I.D.; 25 in. O.D.
• Can be recycled
• Recommend pan ID size should be 2 in. larger than water heater diameter
• Manufactured from aluminum
• Silver metallic finish
• For use with tank water heaters
• Helps protect your floors from damage due to water heater leaks

The Camco Polypropylene Side-Mount Runoff Tube is designed for use with a side-mounted relief valve. The tube safely carries away steam and scalding hot water in the event of accidental valve activation. Made from thermoplastic polypropylene. Tube can be cut to desired length needed.

• Attaches to the discharge outlet of a temperature- and pressure-relief valve to safely carry away steam and hot water in the event of accidental valve activation
• Can be directed to the water heater pan if the pan is plumbed to a drain or other disposal area
• Guards against accidental flooding and expensive repair
• Made of polypropylene with a zinc-plated steel fitting
• Rigid surface is ideal for gripping with standard wrenches
• Easy to install with the included gasket
• Do not connect runoff directly to a discharge drain unless an air gap is provided
• Side mount
• Can be cut to desired length
• 58 in. long

This thermostat is designed to replAce Therm-O-Disc style 59T lower thermostats on residential water heaters. It has adjustable temperature settings, pre-set at 120 degree by the manufacturer. This item is CSA and Ul Listed from the USA and Canada. Meets specification lengths for most American, AO Smith, Bradford White, Craftmaster, GE, GSW, Kenmore, Maytag, Reliance, Richmond, Rheem, Russ, Sears, State and Whirlpool brand water heaters.

• UL and CSA listed
• I year limited warranty
• Energy efficient range setting
• Application voltage 240/208/277/120/480
• Factory pre-set at 120 degree F
• Adjustable temperature settings
• Therm-o-disc style
• Lower thermostat
• Wiring diagram included
• Universal replAcement part

To be used for inlet and outlet hook-ups and other uses where dissimilar metals occur in piping and plumbing systems. Thermoplastic lining prevents corrosion. 3/4 in. NPT x 3/4 in. NPT x 2.5 in. L. Can be used with electric or gas water heaters.

• For inlet and outlet hookups where dissimilar metals occur in piping and plumbing systems
• 2.5 in. L
• 3/4 in NPT x 3/4 in. NPT
• Plastic lining prevents corrosion
• Galvanized metal
• 2/card
• Use for water heater inlet and outlet connections
• Dielectric
• Silver
• Pair

This thermostat is designed to replace Therm-O-Disc style 59T/66T thermostats on residential water heaters. It has adjustable temperature settings, pre-set at 120 degree F by the manufacturer. Meets specification lengths, AO Smith, Bradford White, Craft master, GE, GSW, Kenmore, Maytag, Reliance, Richmond, Rheem, Russ, Sears, State and Whirlpool brand water heaters.

• UL and CSA listed
• 1-year limited warranty
• Energy efficient temperature range setting
• Application voltage 240-Volt/208-Volt/277-Volt/120-Volt/480-Volt
• High limit control
• Temperature can be set from 90 degree to 150 degree
• Built-in safety switch to prevent overheating
• Wiring diagram included
• For electric water heaters
• Upper thermostat

The Camco 11360 24 in. Water Heater Drain Pan is used under an electric water heater to prevent damage to floors or other finished areas in the event of a water heater leak or runoff from the release valve tube. It is made of durable polypropylene plastic that will not corrode or crack. There is a pre-cut side outlet for the drain fitting used to plumb any water away from finished surfaces. Recyclable and non-toxic.

• For electric water heaters only
• 24 in. ID ; 26 in. OD
• Recyclable
• Included PVC drain fitting will fit 1 in. or 1.5 in. drain pipe
• 2.5 in. H
• Pans are injection molded for superior strength and durability

This 5 in. element wrench fits all standard screw-in elements and 1-1.5 in. nuts. Used to remove an element from an electric water heater. Works with a screwdriver. Goes into offsets where an adjustable wrench cannot.

• Zinc-plated metal
• 5 in. L
• Fits standard screw-in elements
• Easy to use
• USE with screwdriver
• Fits 1-1.5 in. nuts
• Fits into offsets that are not accessible with an adjustable wrench
• Element removal tool
• Great for DIY
• Lightweight

This Therm-O-Disc Style Plumber's Pack Water Heater Repair Kit contains (2) 4500-Watt 240-Volt elements and one upper and one lower thermostat. The thermostats are Therm-O-Disc Style. The elements are high watt density zinc-plated copper. Installation instructions included.

• Easy to install
• Fits most water heater models
• High watt density elements
• Convenient repair pack
• CSA listed
• UL listed for USA and Canada
• Built in safety switch on upper thermostat to prevent overheating
• Zinc-plated copper elements
• Includes Therm-O-Disc thermostats
• Includes 2 elements and 2 thermostats

This drain pan is to be used under an electric water heater to prevent water damage to floors or other finished surfaces in the event of a water heater leak. It is made from durable polypropylene plastic. Product is non-toxic and recyclable. CPVC drain fitting is included.

• For electric water heaters
• Includes 1-1/2 in. CPVC fitting
• Pre-cut side opening for drain fitting
• 24 in. I.D.; 26 in. O.D.
• Can be recycled
• Recommend pan ID size should be 2 in. larger than water heater diameter
• Manufactured from durable and flexible polypropylene
• Black finish
• For use with tank water heaters
• Helps protect your floors from damage due to water heater leaks

This Camco 20 in. I.D. water heater drain pan is designed to be installed underneath a water heater. It is used to protect floors in the event of a leak or drips from the runoff tube. It is made of aluminum and will not rust or crack. It can be used for gas or electric water heaters.

• For use with both electric and gas heaters
• Durable aluminum construction
• Prevents potentially-damaging water leaks or drips from the activation of a temperature and pressure relief valve on a water heater
• Pre-cut side opening accommodates the 1 in. to 1.5 in. drain fitting (included)
• Resists cracking and breaking
• Diameter of the pan should be at least 4 in. greater than the diameter of the water heater
• Included PVC drain fitting will fit 1 in. or 1.5 in. drain pipes
• 20 in. inside diameter
• 21 in. outside diameter
• Recyclable

This drain pan is to be used under a gas or electric water heater to prevent damage to floors or other finished surfaces in the event of a water heater leak. It is made from durable polypropylene plastic. Product is non-toxic and recyclable. CPVC drain fitting is included.

• For gas or electric water heaters
• Includes one 1-1/2 in. CPVC fitting
• Pre-cut side opening for drain fitting
• 22 in. I.D.; 23 in. O.D.
• Can be recycled
• Recommend pan size ID should be 2 in. larger than water heater diameter
• Manufactured from aluminum
• Silver finish
• For tank water heaters
• Helps protect your floors from damage due to water heater leaks

The Camco 22 in. I.D. plastic water heater pan is made for use under electric water heaters to help protect your floors from leaks or runoff from T and P valve activation. It is made from durable polypropylene plastic and comes with a 1-1/2 in. PVC drain fitting. A drain opening is set in the side to allow you to direct any water to the outside or to the nearest drain.

• Made from durable polypropylene plastic
• 20 in. inside diameter
• 22 in. outside diameter
• Will not rust, corrode, or crack
• Recyclable
• Non-toxic
• Pre-cut side outlet
• Includes PVC drain fitting
• Black finish

The Camco Plastic Upper Thermostat is ideal for use with electric residential water heaters that have both an upper and lower heating element. There is a built-in safety switch to prevent over-heating. Instructions and wiring diagram are included.

• For use with residential electric water heaters
• Compatible with State, A.O. smith and other water heater brands
• CSA listed and UL Listed for USA and Canada
• Plastic construction
• Apcom style WH10A
• Upper thermostat
• Factory pre-set at 120 degree F (hot)
• Adjustable temperature
• Plastic terminal protector included
• Application voltage: 240-Volt/208-Volt/120-Volt
• High limit control

This thermostat is designed to replAce Therm-O-Disc style 59T/66T thermostats on residential water heaters that use just a single element and thermostat. It has adjustable temperature settings, pre-set at 120 by the manufacturer. This item is CSA and UL Listed for the USA and Canada. Meets specification lengths for most American, AO Smith, Bradford White, Craftmaster, GE, GSW, Kenmore, Maytag, Reliance, Richmond, Rheem, Russ, Sears, State and Whirlpool brand water heaters.

• UL and CSA listed
• I year limited warranty
• Energy efficient range setting
• Application voltage 240/208/277/120/480
• Factory pre-set at 120 degree F
• Adjustable temperature settings
• Therm-o-disc style
• Built-in safety switch to prevent overheating
• Bulk item - no packaging
• Not for use with water heaters that have both upper and lower thermostats/elements

The tankless drain pan is designed to fit underneath most whole house tankless water heaters. Provides both water damage protection and flushing maintenance convenience. The pans are injection molded to give them superior strength and durability.

• Includes 1 in./1-1/2 in. dual size PVC drain fitting
• Polypropylene material will not crack or break
• Recyclable
• Fits most tankless water heaters with a maximum depth of 13 in. and width of 20-1/2 in.
• Measures 21.5 in. W x 16 in. H x 13.4 in. D
• Non toxic
• Pan is convenient when flushing the unit during routine maintenance
• Makes routine flushing maintenance easier
• Mount directly into wall
• Tankless unit can be mounted above or slightly inside the pan

This lower thermostat is to be used with an electric residential tank water heater that has both an upper and lower heating element. It has an adjustable heat setting. It is used in the lower thermostat position to control heat to the lower heating element.

• Application voltage is 240-Volt/208-Volt/120-Volt
• Apcom style WH9
• Terminal protector is included
• Temperature is factory pre-set at an optimal 120 degree F
• Temperature ranges are from 110 degree F to 160 degree F
• Use in lower position on a dual element electric tank water heater
• For use with electric water heaters only
• Plastic and metal construction
• UL Listed for USA and Canada
• Instructions and wiring diagram are included

This drain pan is to be used under gas or electric water heaters to prevent water damage to floors or other finished surfaces in the event of a water heater leak. It is made from aluminum which is recyclable and will not corrode. CPVC fitting is included.

• For gas or electric water heaters
• Includes one 1-1/2 in. CPVC fitting
• Pre-cut side opening for drain fitting
• 26 in. I.D.; 27 in. O.D.
• Can be recycled
• Recommend pan ID size should be 2 in. larger than water heater diameter
• Manufactured from aluminum
• Silver metallic finish
• For tank water heaters
• Helps protect your floors from damage due to water heater leaks

This drain pan is to be used under an electric water heater to prevent water damage to floors or other finished surfaces in the event of a water heater leak. It is made from durable polypropylene plastic. Product is non-toxic and recyclable. CPVC drain fitting is included.

• For electric water heaters
• Includes one 1-1/2 in. CPVC fitting
• Pre-cut side opening for drain fitting
• 26 in. I.D.; 28 in. O.D.
• Can be recycled
• Recommend pan ID size should be 2 in. larger than water heater diameter
• Manufactured from durable and flexible polypropylene
• Black finish
• For tank water heaters
• Helps protect your floors from damage due to water heater leaks

Dielectric water heater heat trap nipple 2-Pack. Improves the energy efficiency of a water heaters by reducing heat loss through inlet and outlet pipes. Dielectric Inert Thermoplastic lining helps prevent corrosion that can occur when different metals are joined in water.

• Limited 1-year warranty
• Thermoplastic lining
• Self-cleaning
• 3/4 in. NPT x 3/4 in. NPT
• Silver
• For water heater connector
• Dielectric heat trap
• Used with water heater inlet and outlet hookups
• 3 inches long
• Male x male
• Pack of 2

The Camco CPVC drain pan fitting is a replacement fitting for all Camco water heater drain pans, including tankless water heater pans. It comes with a lock nut and washer. Can also be used to replace the fitting on Camco washing machine drain pans.

• Made of CPVC material
• CPVC is required by code in some areas
• Includes drain fitting, locknut and washer
• Replacement for lost or damaged water heater drain pan fittings
• Connect to drain hole in pan, and to drain pipe, to direct leaking water away from finished areas
• Installing, position washer and lock nut on inside of pan
• Can be used for a bottom drain outlet or a side drain outlet (if sides are deep enough)
• Fitting goes into a 1-3/8 in. drain hole
• Cut drain hole in pan if hole is not pre-cut
• Instructions included

The Camco 5/8 in. O.D. x 42 in. Flexible 3 Section anode rod extends the life of your water heater and protects it from corrosion. The anode rod is a self-sacrificing rod that attracts the minute pieces of metal that cause corrosion. This product also features a precision milled thumb wheel for easy adjustment and multi-segment design that allows the anode to flex for easy installs in low overhead clearance situations.

• Multi-segment design allows anode to flex for easy installs in low overhead clearance situations
• Greatly extends the life of your water heater by reducing the effects of galvanic corrosion
• 3/4 in. - 14 NPT threads
• 5/8 in. O.D. x 42 in. L
• Aluminum construction
• Prevents or deters corrosion of any metal exposed to water inside the water heater
• Attracts corrosion causing particles away from your water heater
• UL Listed
• 1-year limited manufacturer's warranty
• Camco boasts a long-standing tradition of customer service and excellence in the RV industry

This drain pan is for use under an electric water heater to prevent water damage to floors or other finished surfaces in the event of a water heater leak. It is made from durable polypropylene plastic. Product is non-toxic and recyclable. CPVC drain fitting is included.

• For electric water heaters
• Includes one 1-1/2 in. CPVC fitting
• Pre-cut side opening for drain fitting
• 22 in. I.D. ; 24 in. O.D.
• Can be recycled
• Recommend pan ID size should be 2 in.larger that water heater diameter
• Manufactured from durable and flexible polypropylene
• Black finish
• For use with tank water heaters
• Helps protect your floors from water damage due to water heater leaks

This Center Top Mount Runoff Tube is connected to the water heater's T and P valve to route steam with after runoff into the water heater drain pan or outside of the structure via piping so that finished surfaces will not be damaged by the moisture. It is made of thermoplastic polypropylene. The tube has a 59 in. vertical height but can be cut to desired length, The horizontal arm is 12 in.

• Runoff tube
• Center top mount
• Thermoplastic polypropylene
• 12 in. horizontal
• 59 in. vertical
• Connects to T and P Valve
• Used to route steam with after runoff from the T and P valve into the drain pan or to the outside of the structure via pipe
• Can be cut to desired length
• Rigid surface can be gripped with standard wrenches

This thermostat is designed to replace Therm-O-Disc style 59T/66T thermostats on residential water heaters that use just a single element and thermostat. It has adjustable temperature settings, pre-set at 120 degree F by the manufacturer. Meets specification lengths, AO Smith, Bradford White, Craft master, GE, GSW, Kenmore, Maytag, Reliance, Richmond, Rheem, Russ, Sears, State and Whirlpool brand water heaters.

• UL and CSA listed
• 1-year limited warranty
• Energy efficient range setting
• Application voltage 240-Volt/208-Volt/277-Volt/120-Volt/480-Volt
• Factory setting at 120 degree F
• Can be adjusted from 90 degree to 150 degree
• Built-in safety switch to prevent overheating
• Wiring diagram included
• For electric water heaters
• Not for use with water heaters that have both upper and lower thermostats/elements

The Camco PVC drain pan fitting is a replacement fitting for all Camco water heater drain pans, including tankless water heater pans. It comes with a lock nut and washer. Can also be used to replace the fitting on Camco washing machine drain pans.

• Made of PVC material
• Check local codes to determine if PVC or CPVC fitting is required
• Includes drain fitting, locknut and washer
• Replacement for lost or damaged water heater drain pan fittings
• Connect to drain hole in pan, and to drain pipe, to direct leaking water away from finished areas
• Installing, position washer and lock nut on inside of pan
• Can be used for a bottom drain outlet or a side drain outlet (if sides are deep enough)
• Fitting goes into a 1-3/8 in. drain hole
• Cut drain hole in pan if hole is not pre-cut
• Instructions included

This self-sacrificing aluminum anode rod is used in a water heater to help protect any exposed metal in the tank from corrosion. The 3-section flexible design allows for the anode rod to be installed in spaces where overhead clearance above the water heater is limited and a standard anode rod would not fit. The dielectric nipple allows it to be installed in the hot water outlet so that an extra anode rod can be used when water is extremely high in mineral content and the homeowner wants extra protection for the water heater, or when the water heater does not come with an anode rod. It is 42 in. long and 3/4 in. OD.

• 3.4 in. OD
• Flexible 3-section
• 42 in. L
• Aluminum
• 5 in. dielectric nipple
• Used to protect any exposed metal in the tank from corrosion
• 3-section feature allows for flexibility to install when there is low clearance above the water heater
• Aluminum with traces of zinc helps to reduce sulfur small
• Self-sacrificing
• Replace more often if water has high mineral content

This Apcom Style Plumber's Pack Water Heater Repair Kit contains (2) 4500-Watt 240-Volt elements and one upper and one lower thermostat. The thermostats are Apcom Style. The elements are high watt density zinc-plated copper. Installation instructions included.

• Easy to install
• Fits most electric water heater models
• High watt density elements
• Convenient repair pack
• CSA Listed
• UL Listed for USA and Canada
• Built in safety switch on upper thermostat to prevent overheating
• Includes 2 thermostats and 2 elements
• Zinc-plated copper elements
• Includes Apcom thermostats

This 26 in. ID water heater drain pan is designed to be installed underneath a water heater. It is used to protect floors in the even of a leak or drips from the runoff tube. It is made of polypropylene plastic and will not corrode or crack. It can be used for electric water heaters. Sold in carton of 6.

• 6-pack
• Made of polypropylene plastic
• Comes with PVC fitting
• Will not corrode or crack
• Recyclable
• Non-toxic
• 26 in. I.D.
• 28 in. O.D.
• For electric water heaters
• Pre-cut side opening for drain fitting
• Manufacturer recommends drain pan to be 4 in. larger in diameter than the diameter of the water heater

This Apcom Style Plumber's Pack Water Heater Repair Kit contains (2) 4500-Watt 240-Volt elements and one upper and one lower thermostat. The thermostats are Apcom Style. The elements are low watt density zinc-plated copper. Installation instructions included.

• Easy to install
• Fits most water heater models
• Low watt density elements
• Convenient repair pack
• CSA listed
• UL listed for USA and Canada
• Built in safety switch on upper thermostat to prevent overheating
• Includes 2 thermostats and 2 elements
• Zinc-plated copper elements
• Includes Apcom thermostats

The Camco Therm-O-Disc Style Plumber's Pack Water Heater Repair Kit contains (2) 4500-Watt 240-Volt elements and 1 upper and 1 lower thermostat. The thermostats are Therm-O-Disc Style. Installation instructions included.

• Easy to install
• Fits most water heater models
• Low watt density elements
• Convenient repair pack
• Save money by purchasing parts together
• Contains 2 elements, 1 upper, and 1 lower thermostat
• Therm-O-disc style thermostats
• Elements are 4500-Watt 240-Volt
• Elements are UL Listed for USA and Canada
• Thermostats are CSA listed and UL Listed for USA and Canada

The Camco flared dip tube is a non-metallic tube that directs incoming cold water into a water heater. It directs water to the bottom of the tank so that the water in the upper part of the tank will stay warm. It can be cut to desired length if too long. The gasket is included.

• Water inlet dip tube
• 52 in. vertical length
• Can be cut to desired length
• Gasket included
• No-break poly resin
• PEX material
• Directs cold water to the bottom of the water heater
• Flared opening
• Non-metallic
• Anti-siphon hole breaks damaging siphon action