This Camco 22 in. ID water heater drain pan is designed to be installed underneath a water heater. It is used to protect floors in the even of a leak or drips from the runoff tube. It is made of aluminum and will not rust or crack. It can be used for gas or electric water heaters.

• Included PVC drain fitting will fit 1 in. or 1.5 in. drain pipes
• Pre-cut side opening for drain fitting
• Electric or gas water heater use
• 22 in. inside diameter
• 23 in. outside diameter
• Recyclable
• Manufacturer recommends drain pan to be 4 in. larger in diameter than the diameter of the water heater
• Will not rust or crack
• Helps prevent damage from water leaks
• Fitting included

The Camco 11360 24 in. Water Heater Drain Pan is used under an electric water heater to prevent damage to floors or other finished areas in the event of a water heater leak or runoff from the release valve tube. It is made of durable polypropylene plastic that will not corrode or crack. There is a pre-cut side outlet for the drain fitting used to plumb any water away from finished surfaces. Recyclable and non-toxic.

• For electric water heaters only
• 24 in. ID ; 26 in. OD
• Recyclable
• Included PVC drain fitting will fit 1 in. or 1.5 in. drain pipe
• 2.5 in. H
• Pans are injection molded for superior strength and durability

This drain pan is for use under an electric water heater to prevent water damage to floors or other finished surfaces in the event of a water heater leak. It is made from durable polypropylene plastic. Product is non-toxic and recyclable. CPVC drain fitting is included.

• For electric water heaters
• Includes one 1-1/2 in. CPVC fitting
• Pre-cut side opening for drain fitting
• 22 in. I.D. ; 24 in. O.D.
• Can be recycled
• Recommend pan ID size should be 2 in.larger that water heater diameter
• Manufactured from durable and flexible polypropylene
• Black finish
• For use with tank water heaters
• Helps protect your floors from water damage due to water heater leaks

This thermostat is designed to replAce Therm-O-Disc style 59T/66T thermostats on residential water heaters. It has adjustable temperature settings, pre-set at 120 degree by the manufacturer. This item is CSA and UL Listed for the USA and Canada. Meets specification lengths for most American, AO Smith, Bradford White, Craftmaster, GE, GSW, Kenmore, Maytag, Reliance, Richmond, Rheem, Russ, Sears, State and Whirlpool brand water heaters.

• UL and CSA listed
• I year limited warranty
• Energy efficient range setting
• Application voltage 240/208/277/120/480
• Factory pre-set at 120 degree F
• Adjustable temperature settings
• Therm-o-disc style
• Built-in safety switch to prevent overheating
• Bulk item - no packaging
• Universal replAcement part

The Camco Polypropylene Side-Mount Runoff Tube is designed for use with a side-mounted relief valve. The tube safely carries away steam and scalding hot water in the event of accidental valve activation. Made from thermoplastic polypropylene. Tube can be cut to desired length needed.

• Attaches to the discharge outlet of a temperature- and pressure-relief valve to safely carry away steam and hot water in the event of accidental valve activation
• Can be directed to the water heater pan if the pan is plumbed to a drain or other disposal area
• Guards against accidental flooding and expensive repair
• Made of polypropylene with a zinc-plated steel fitting
• Rigid surface is ideal for gripping with standard wrenches
• Easy to install with the included gasket
• Do not connect runoff directly to a discharge drain unless an air gap is provided
• Side mount
• Can be cut to desired length
• 58 in. long

The Camco 11460 22 in. Water Heater Drain Pan is used under an electric water heater to prevent damage to floors or other finished areas in the event of a water heater leak or runoff from the release valve tube. It is made of durable polypropylene plastic that will not corrode or crack. There is a pre-cut side outlet for the drain fitting used to plumb any water away from finished surfaces. Recyclable and non-toxic.

• 22 in. I.D.
• 24 in. O.D.
• For electric water heater only
• Side opening for drain fitting
• Includes 1.0 in. x 1.5 in. CPVC drain fitting kit
• Durable polypropylene construction
• Will not rust, corrode or crack
• Black color
• Tools required for drain installation
• 1-year limited warranty

This thermostat is designed to replAce Therm-O-Disc style 59T lower thermostats on residential water heaters. It has adjustable temperature settings, pre-set at 120 degree by the manufacturer. This item is CSA and Ul Listed from the USA and Canada. Meets specification lengths for most American, AO Smith, Bradford White, Craftmaster, GE, GSW, Kenmore, Maytag, Reliance, Richmond, Rheem, Russ, Sears, State and Whirlpool brand water heaters.

• UL and CSA listed
• I year limited warranty
• Energy efficient range setting
• Application voltage 240/208/277/120/480
• Factory pre-set at 120 degree F
• Adjustable temperature settings
• Therm-o-disc style
• Lower thermostat
• Wiring diagram included
• Universal replAcement part

This drain pan is to be used under gas or electric water heaters to prevent damage to floors or other finished surfaces in the event of a water heater leak. It is made from aluminum which is recyclable and will not corrode. CPVC drain fitting is included.

• For gas or electric water heaters
• Includes one 1-1/2 in. CPVC fitting
• Pre-cut side opening for drain fitting
• 24 in. I.D.; 25 in. O.D.
• Can be recycled
• Recommend pan ID size should be 2 in. larger than water heater diameter
• Manufactured from aluminum
• Silver metallic finish
• For use with tank water heaters
• Helps protect your floors from damage due to water heater leaks

To be used for inlet and outlet hook-ups and other uses where dissimilar metals occur in piping and plumbing systems. Thermoplastic lining prevents corrosion. 3/4 in. NPT x 3/4 in. NPT x 2.5 in. L. Can be used with electric or gas water heaters.

• For inlet and outlet hookups where dissimilar metals occur in piping and plumbing systems
• 2.5 in. L
• 3/4 in NPT x 3/4 in. NPT
• Plastic lining prevents corrosion
• Galvanized metal
• 2/card
• Use for water heater inlet and outlet connections
• Dielectric
• Silver
• Pair

This Therm-O-Disc Style Plumber's Pack Water Heater Repair Kit contains (2) 4500-Watt 240-Volt elements and one upper and one lower thermostat. The thermostats are Therm-O-Disc Style. The elements are high watt density zinc-plated copper. Installation instructions included.

• Easy to install
• Fits most water heater models
• High watt density elements
• Convenient repair pack
• CSA listed
• UL listed for USA and Canada
• Built in safety switch on upper thermostat to prevent overheating
• Zinc-plated copper elements
• Includes Therm-O-Disc thermostats
• Includes 2 elements and 2 thermostats

This thermostat is designed to replace Therm-O-Disc style 59T lower thermostats on residential water heaters. It has adjustable temperature settings, pre-set at 120 degree F by the manufacturer. This item is CSA and UL Listed from the USA and Canada. Meets specification lengths AO Smith, Bradford White, Craft master, GE, GSW, Kenmore, Maytag, Reliance, Richmond, Rheem, Russ, Sears, State and Whirlpool brand water heaters.

• UL and CSA listed
• 1-year limited warranty
• Energy efficient range setting
• Application voltage 240-Volt/208-Volt/277-Volt/120-Volt/480-Volt
• Comes from factory set at 120 degree
• Temperature settings can be adjusted from 90 degree to 150 degree
• Lower thermostat
• Wiring diagram included
• For electric water heaters
• Built in safety switch to prevent over heating

This thermostat is designed to replace Therm-O-Disc style 59T/66T thermostats on residential water heaters. It has adjustable temperature settings, pre-set at 120 degree F by the manufacturer. Meets specification lengths, AO Smith, Bradford White, Craft master, GE, GSW, Kenmore, Maytag, Reliance, Richmond, Rheem, Russ, Sears, State and Whirlpool brand water heaters.

• UL and CSA listed
• 1-year limited warranty
• Energy efficient temperature range setting
• Application voltage 240-Volt/208-Volt/277-Volt/120-Volt/480-Volt
• High limit control
• Temperature can be set from 90 degree to 150 degree
• Built-in safety switch to prevent overheating
• Wiring diagram included
• For electric water heaters
• Upper thermostat

The Camco Plastic Upper Thermostat is ideal for use with electric residential water heaters that have both an upper and lower heating element. There is a built-in safety switch to prevent over-heating. Instructions and wiring diagram are included.

• For use with residential electric water heaters
• Compatible with State, A.O. smith and other water heater brands
• CSA listed and UL Listed for USA and Canada
• Plastic construction
• Apcom style WH10A
• Upper thermostat
• Factory pre-set at 120 degree F (hot)
• Adjustable temperature
• Plastic terminal protector included
• Application voltage: 240-Volt/208-Volt/120-Volt
• High limit control

This 5 in. element wrench fits all standard screw-in elements and 1-1.5 in. nuts. Used to remove an element from an electric water heater. Works with a screwdriver. Goes into offsets where an adjustable wrench cannot.

• Zinc-plated metal
• 5 in. L
• Fits standard screw-in elements
• Easy to use
• USE with screwdriver
• Fits 1-1.5 in. nuts
• Fits into offsets that are not accessible with an adjustable wrench
• Element removal tool
• Great for DIY
• Lightweight

The Camco CPVC drain pan fitting is a replacement fitting for all Camco water heater drain pans, including tankless water heater pans. It comes with a lock nut and washer. Can also be used to replace the fitting on Camco washing machine drain pans.

• Made of CPVC material
• CPVC is required by code in some areas
• Includes drain fitting, locknut and washer
• Replacement for lost or damaged water heater drain pan fittings
• Connect to drain hole in pan, and to drain pipe, to direct leaking water away from finished areas
• Installing, position washer and lock nut on inside of pan
• Can be used for a bottom drain outlet or a side drain outlet (if sides are deep enough)
• Fitting goes into a 1-3/8 in. drain hole
• Cut drain hole in pan if hole is not pre-cut
• Instructions included

This drain pan is to be used under an electric water heater to prevent water damage to floors or other finished surfaces in the event of a water heater leak. It is made from durable polypropylene plastic. Product is non-toxic and recyclable. CPVC drain fitting is included.

• For electric water heaters
• Includes 1-1/2 in. CPVC fitting
• Pre-cut side opening for drain fitting
• 24 in. I.D.; 26 in. O.D.
• Can be recycled
• Recommend pan ID size should be 2 in. larger than water heater diameter
• Manufactured from durable and flexible polypropylene
• Black finish
• For use with tank water heaters
• Helps protect your floors from damage due to water heater leaks

This lower thermostat is to be used with an electric residential tank water heater that has both an upper and lower heating element. It has an adjustable heat setting. It is used in the lower thermostat position to control heat to the lower heating element.

• Application voltage is 240-Volt/208-Volt/120-Volt
• Apcom style WH9
• Terminal protector is included
• Temperature is factory pre-set at an optimal 120 degree F
• Temperature ranges are from 110 degree F to 160 degree F
• Use in lower position on a dual element electric tank water heater
• For use with electric water heaters only
• Plastic and metal construction
• UL Listed for USA and Canada
• Instructions and wiring diagram are included

This drain pan is to be used under an electric water heater to prevent water damage to floors or other finished surfaces in the event of a water heater leak. It is made from durable polypropylene plastic. Product is non-toxic and recyclable. CPVC drain fitting is included.

• For electric water heaters
• Includes one 1-1/2 in. CPVC fitting
• Pre-cut side opening for drain fitting
• 26 in. I.D.; 28 in. O.D.
• Can be recycled
• Recommend pan ID size should be 2 in. larger than water heater diameter
• Manufactured from durable and flexible polypropylene
• Black finish
• For tank water heaters
• Helps protect your floors from damage due to water heater leaks

This drain pan is to be used under gas or electric water heaters to prevent water damage to floors or other finished surfaces in the event of a water heater leak. It is made from aluminum which is recyclable and will not corrode. CPVC fitting is included.

• For gas or electric water heaters
• Includes one 1-1/2 in. CPVC fitting
• Pre-cut side opening for drain fitting
• 26 in. I.D.; 27 in. O.D.
• Can be recycled
• Recommend pan ID size should be 2 in. larger than water heater diameter
• Manufactured from aluminum
• Silver metallic finish
• For tank water heaters
• Helps protect your floors from damage due to water heater leaks

This thermostat is designed to replAce Therm-O-Disc style 59T/66T thermostats on residential water heaters that use just a single element and thermostat. It has adjustable temperature settings, pre-set at 120 by the manufacturer. This item is CSA and UL Listed for the USA and Canada. Meets specification lengths for most American, AO Smith, Bradford White, Craftmaster, GE, GSW, Kenmore, Maytag, Reliance, Richmond, Rheem, Russ, Sears, State and Whirlpool brand water heaters.

• UL and CSA listed
• I year limited warranty
• Energy efficient range setting
• Application voltage 240/208/277/120/480
• Factory pre-set at 120 degree F
• Adjustable temperature settings
• Therm-o-disc style
• Built-in safety switch to prevent overheating
• Bulk item - no packaging
• Not for use with water heaters that have both upper and lower thermostats/elements

This drain pan is to be used under a gas or electric water heater to prevent damage to floors or other finished surfaces in the event of a water heater leak. It is made from durable polypropylene plastic. Product is non-toxic and recyclable. CPVC drain fitting is included.

• For gas or electric water heaters
• Includes one 1-1/2 in. CPVC fitting
• Pre-cut side opening for drain fitting
• 22 in. I.D.; 23 in. O.D.
• Can be recycled
• Recommend pan size ID should be 2 in. larger than water heater diameter
• Manufactured from aluminum
• Silver finish
• For tank water heaters
• Helps protect your floors from damage due to water heater leaks

This Camco 20 in. I.D. water heater drain pan is designed to be installed underneath a water heater. It is used to protect floors in the event of a leak or drips from the runoff tube. It is made of aluminum and will not rust or crack. It can be used for gas or electric water heaters.

• For use with both electric and gas heaters
• Durable aluminum construction
• Prevents potentially-damaging water leaks or drips from the activation of a temperature and pressure relief valve on a water heater
• Pre-cut side opening accommodates the 1 in. to 1.5 in. drain fitting (included)
• Resists cracking and breaking
• Diameter of the pan should be at least 4 in. greater than the diameter of the water heater
• Included PVC drain fitting will fit 1 in. or 1.5 in. drain pipes
• 20 in. inside diameter
• 21 in. outside diameter
• Recyclable

This Center Top Mount Runoff Tube is connected to the water heater's T and P valve to route steam with after runoff into the water heater drain pan or outside of the structure via piping so that finished surfaces will not be damaged by the moisture. It is made of thermoplastic polypropylene. The tube has a 59 in. vertical height but can be cut to desired length, The horizontal arm is 12 in.

• Runoff tube
• Center top mount
• Thermoplastic polypropylene
• 12 in. horizontal
• 59 in. vertical
• Connects to T and P Valve
• Used to route steam with after runoff from the T and P valve into the drain pan or to the outside of the structure via pipe
• Can be cut to desired length
• Rigid surface can be gripped with standard wrenches

The Camco PVC drain pan fitting is a replacement fitting for all Camco water heater drain pans, including tankless water heater pans. It comes with a lock nut and washer. Can also be used to replace the fitting on Camco washing machine drain pans.

• Made of PVC material
• Check local codes to determine if PVC or CPVC fitting is required
• Includes drain fitting, locknut and washer
• Replacement for lost or damaged water heater drain pan fittings
• Connect to drain hole in pan, and to drain pipe, to direct leaking water away from finished areas
• Installing, position washer and lock nut on inside of pan
• Can be used for a bottom drain outlet or a side drain outlet (if sides are deep enough)
• Fitting goes into a 1-3/8 in. drain hole
• Cut drain hole in pan if hole is not pre-cut
• Instructions included