The Backer EHP Inc. copper based sheathed water heater available in both high and low watt densities provides a great solution for heating water with our completely tinned sheath and screw plug design to minimize galvanic action. Multiple water heater manufacturers now use this type of sheathed element as original equipment. Available replacements are the standard square flange and the straight thread screw plug.

• Sheath material platted copper sheath and platted steel screw plug
• Volt: 240-Volt
• Watt: 4500-Watt
• Design type high watt density fold back (4-passes)

Holdrite quick strap Water Heater Restraints are the most tested, approved and recognized water heater restraints in the market. The patented Quick Link system provides secure frontal attachment making quick strap a superior seismic mounting solution. Holdrite quick strap is preferred by DIY, DIFM and professional contractors because it provides the highest quality, safest and easiest installation.

• Water heater restraint to protect against natural disasters: earthquakes, tornadoes and hurricanes
• Easy to install for plumbers/homeowners
• Meets plumbing and real estate codes
• Patented quick link system provides secure frontal attachment
• 24 gauge galvanized steel
• California Division State Architect approval #98-018
• California Division State Architect approval #97-010
• UPC/IPC/IAPMO listed
• Up to 80 gallon water heater
• Hardware included

This Camco 30 in. I.D. water heater drain pan is designed to be installed underneath a water heater. It is used to protect floors in the event of a leak or drips from the runoff tube. It is made of aluminum and will not rust or crack. It can be used for gas or electric water heaters.

• Included PVC drain fitting will fit 1 in. or 1.5 in. drain pipes
• Pre-cut side opening for drain fitting
• Aluminum construction
• Electric or gas water heater use
• Rust, corrosion, and crack resistant
• 30 in. insideDia
• 31 in. Dia outside
• Recyclable
• Manufacturer recommends drain pan to be 4 in. Dia larger in than the diameter of the water heater
• Helps prevent damage from water leaks

This thermostat is designed to replAce Therm-O-Disc style 59T/66T thermostats on residential water heaters. It has adjustable temperature settings, pre-set at 120 degree by the manufacturer. This item is CSA and UL Listed for the USA and Canada. Meets specification lengths for most American, AO Smith, Bradford White, Craftmaster, GE, GSW, Kenmore, Maytag, Reliance, Richmond, Rheem, Russ, Sears, State and Whirlpool brand water heaters.

• UL and CSA listed
• I year limited warranty
• Energy efficient range setting
• Application voltage 240/208/277/120/480
• Factory pre-set at 120 degree F
• Adjustable temperature settings
• Therm-o-disc style
• Built-in safety switch to prevent overheating
• Bulk item - no packaging
• Universal replAcement part

This thermostat is designed to replAce Therm-O-Disc style 59T lower thermostats on residential water heaters. It has adjustable temperature settings, pre-set at 120 degree by the manufacturer. This item is CSA and Ul Listed from the USA and Canada. Meets specification lengths for most American, AO Smith, Bradford White, Craftmaster, GE, GSW, Kenmore, Maytag, Reliance, Richmond, Rheem, Russ, Sears, State and Whirlpool brand water heaters.

• UL and CSA listed
• I year limited warranty
• Energy efficient range setting
• Application voltage 240/208/277/120/480
• Factory pre-set at 120 degree F
• Adjustable temperature settings
• Therm-o-disc style
• Lower thermostat
• Wiring diagram included
• Universal replAcement part

The Backer EHP Inc. copper based sheathed water heater available in both high and low watt densities provides a great solution for heating water with our completely tinned sheath and screw plug design to minimize galvanic action. Multiple water heater manufacturers now use this type of sheathed element as original equipment. Available replacements are the standard square flange and the straight thread screw plug.

• Sheath material platted copper sheath and platted steel screw plug
• Volt: 240-Volt
• Watt: 4500-Watt
• Design type high watt density fold back (2 passes)

This Camco 24 in. ID water heater drain pan is designed to be installed underneath a water heater. It is used to protect floors in the even of a leak or drips from the runoff tube. It is made of aluminum and will not rust or crack. It can be used for gas or electric water heaters.

• Included PVC drain fitting will fit 1 in. or 1.5 in. drain pipes
• Pre-cut side opening for drain fitting
• Electric or gas water heater use
• 24 in. I.D.
• 25 in. outside diameter
• Recyclable
• Manufacturer recommends drain pan to be 4 in. larger in diameter than the diameter of the water heater
• Will not rust or crack
• Helps prevent damage from water leaks
• Made from aluminum

This thermostat is designed to replace Therm-O-Disc style 59T lower thermostats on residential water heaters. It has adjustable temperature settings, pre-set at 120 degree F by the manufacturer. This item is CSA and UL Listed from the USA and Canada. Meets specification lengths AO Smith, Bradford White, Craft master, GE, GSW, Kenmore, Maytag, Reliance, Richmond, Rheem, Russ, Sears, State and Whirlpool brand water heaters.

• UL and CSA listed
• 1-year limited warranty
• Energy efficient range setting
• Application voltage 240-Volt/208-Volt/277-Volt/120-Volt/480-Volt
• Comes from factory set at 120 degree
• Temperature settings can be adjusted from 90 degree to 150 degree
• Lower thermostat
• Wiring diagram included
• For electric water heaters
• Built in safety switch to prevent over heating

To be used for inlet and outlet hook-ups and other uses where dissimilar metals occur in piping and plumbing systems. Thermoplastic lining prevents corrosion. 3/4 in. NPT x 3/4 in. NPT x 2.5 in. L. Can be used with electric or gas water heaters.

• For electric or gas water heaters
• Length is 2.5 in.
• 3/4 in NPT x 3/4 in. NPT
• Plastic lining prevents corrosion
• Galvanized metal
• 2/card
• Use for water heater inlet and outlet connections
• Dielectric
• Silver
• Pair

The Home-Flex 3/4 in. FIP x 3/4 in. FIP x 24 in. L Stainless Steel Corrugated Water Connector is designed for use in residential and commercial applications for water heater hookups. It is more flexible when compared copper corrugated products, due to its kink-free installation. Engineered of flexible lead free stainless steel, attached end fittings and built-in dielectric sleeves, it is the ideal choice for both homeowners and contractors. Extremely durable corrugated stainless-steel construction Built in dielectric sleeves negates the need for a separate dielectric union Easily adapts to water heaters with standard male pipe threads IAPMO certified.

• Extremely durable corrugated stainless-steel construction
• Built in dielectric sleeves eliminates the need for a separate dielectric union
• Easily adapts to water heaters with standard male pipe threads
• IAPMO certified
• 3/4 in. size
• 24 in. L; Minimum recommended bend radius: 2.5 in.
• 3/4" FIP connections
• Chrome plated brass supply nuts.
• Soft, thick rubber washer to create a tight seal. Follow instructions carefully and do not over tighten.
• Designed for use in residential and commercial applications for water heater hookups
• Conforms to ASME A112.18.6/CSAB125.6

This lower thermostat is to be used with an electric residential tank water heater that has both an upper and lower heating element. It has an adjustable heat setting. It is used in the lower thermostat position to control heat to the lower heating element.

• Application voltage is 240-Volt/208-Volt/120-Volt
• Apcom style WH9
• Terminal protector is included
• Temperature is factory pre-set at an optimal 120 degree F
• Temperature ranges are from 110 degree F to 160 degree F
• Use in lower position on a dual element electric tank water heater
• For use with electric water heaters only
• Plastic and metal construction
• UL Listed for USA and Canada
• Instructions and wiring diagram are included

The 3/4 in. x 18 in. SharkBite Water Heater Connector with Integrated Ball Valve allows you to easily connect your Hot and Cold-Water Supply lines to your Water Heater. After applying pipe thread tape to the MIP nipples on your water heater, thread the FIP end of the Water Heater connector onto the tank and tighten with channel locks. Then simply push the SharkBite Push-Fit end onto Copper, PEX, or CPVC pipes and your Water Heater is connected. The Integrated Ball Valve on the SharkBite Water Heater Connector provides a quarter-turn, single handle shut-off to the water supply. The braided stainless-steel lines are available in different lengths from 12 in. - 24 in. (without Ball Valve) and are also available in Corrugated Stainless Steel. SharkBite Water Heater Connectors will decrease the amount of time and effort needed to install a Water Heater in your home and are the fastest way to complete your project.

• Lead free DZR brass fittings, braided stainless steel hose
• Use to connect to any combination of copper, PEX, CPVC, or PE-RT pipes
• Innovative push-to-connect design makes for quick and easy installation
• Push-to-connect fittings require no solder, glue, unions or tools
• Fitting can be rotated on pipe after installation making it easier to work in tight spaces
• Designed for potable water distribution as well as hydronic heating applications
• Corrosion resistant to improve longevity
• Listed by IAPMO and design certified and listed to ASSE 1061/NSF 61
• Meets IAPMO, UPC, IPC, and cUPC requirements
• Demount clip allows user to release the fitting from the pipe for convenient installation flexibility (sold separately)
• Rated to 200 degree F and 200 psi
• 3/4 in. pipe insertion depth = 1-1/8 in.

This Camco 26 in. ID water heater drain pan is designed to be installed underneath a water heater. It is used to protect floors in the even of a leak or drips from the runoff tube. It is made of aluminum and will not rust or crack. It can be used for gas or electric water heaters.

• Included PVC drain fitting will fit 1 in. or 1.5 in. drain pipes
• Pre-cut side opening for drain fitting
• Electric or gas water heater use
• 26 in. inside diameter
• 27 in. outside diameter
• Recyclable
• Manufacturer recommends drain pan to be 4 in. larger in diameter than the diameter of the water heater
• Will not rust or crack
• Helps prevent damage from water leaks
• Made from aluminum

HOME-FLEX 3/4 in. MIP x 3/4 in. FIP x 24 in. L Copper Corrugated Water Connector is designed for use in residential and commercial applications for water heater hookups. It is flexible, corrosion resistant and has attached end fittings with built-in dielectric collars. It is the ideal choice for homeowners and contractors alike.

• Extremely durable corrugated copper construction
• Built in dielectric sleeves negates the need for a separate dielectric union
• Easily adapts to water heaters with standard male pipe threads
• IAPMO certified
• 3/4 in. size; 24 in. length
• For water use only in accessible locations
• FIP connections; Minimum Bend Radius: 2.5 in.
• Zinc plated nuts
• Thick rubber washer to create a tight seal
• Designed for use in residential and commercial applications for water heater hookups

With the Water Heater Controls, only 4 models are needed to replace multiple AO Smith and Bradford White controls. You can consolidate your inventory while opening up more sales opportunities and capturing more business. Plus, with the affordable cost and easy installation, You will make more profits per job all while delivering great value and quality for your customers.

• Service AO Smith and Bradford white natural gas water heaters
• Status LED trims repair time by up to 30 minutes
• Resettable emergency temperature cutoff reduces cost and labor time by eliminating valve replacement
• Bigger pilot flame; reduces customer callbacks
• Accurate temperature sensing improves comfort and eliminates scalding risk
• Anti-scaling algorithms protect children and elderly from water exceeding the set point
• 2 insulation sizes
• Order products straight from Honeywell for quicker turnaround times
• Self-powered - no electricity required
• Modern design and intuitive controls for ease of use

Protection Plus is a 4-year warranty extension kit to be used for new Rheem water heater installations. This item is sold in package quantity of 1 and provides a label to be placed on the water heater. With just 2 water heaters, you have the option of selling 4 warranty periods which will effectively have 4 water heaters in little more space than 2.

• 6-year limited tank warranty becomes 10-year
• 8-year limited tank warranty becomes 12-year
• Provides up to 135% additional anodic protection
• For use on all Rheem residential models except manufactured housing, marathon, point-of-use, hybrid electric, table top, condensing gas models, tankless or thermal expansion tanks
• Great up-sale opportunity
• High quality magnesium anode rod with plastic lined nipple (hot side)
• Plastic lined nipple (cold side)
• Brass 3/4 in. to 1 in. adaptor
• Warranty certificate with instructions
• Protection Plus label to be placed on water heater

HOME-FLEX 3/4 in. MIP x 3/4 in. FIP x 18 in. L Copper Corrugated Water Connector is designed for use in residential and commercial applications for water heater hookups. It is flexible, corrosion resistant and has attached end fittings with built-in dielectric collars. It is the ideal choice for homeowners and contractors alike.

• Extremely durable corrugated copper construction
• Built in dielectric sleeves negates the need for a separate dielectric union
• Easily adapts to water heaters with standard male pipe threads
• IAPMO certified
• 3/4 in. size; 18 in. length; recommended minimum bend radius: 2.5 in.
• For use with water only in accessible locations
• MIP x FIP connections
• Zinc plated nuts
• Thick rubber washer to create a tight seal
• Designed for use in residential and commercial applications for water heater hookups

The Home-Flex 3/4 in. FIP x 3/4 in. FIP x 18 in. L Stainless Steel Corrugated Water Connector is designed for use in residential and commercial applications for water heater hookups. It is more flexible when compared copper corrugated products due to its kink-free installation. Engineered of flexible lead free stainless steel, attached end fittings and built-in dielectric sleeves. It is the ideal choice for both homeowners and contractors. Extremely durable corrugated stainless-steel construction. Built in dielectric sleeves negates the need for a separate dielectric union Easily adapts to water heaters with standard male pipe threads IAPMO certified.

• Extremely durable corrugated stainless-steel construction
• Built in dielectric sleeves eliminates the need for a separate dielectric union
• Easily adapts to water heaters with standard male pipe threads
• IAPMO certified
• Corrugated stainless steel tubing is .01 in. / 25mm thick
• 18 in. L; Minimum recommended bend radius: 2.5 in.
• 3/4 in. FIP connectors
• Chrome plated brass supply nuts
• Soft, thick EPDM rubber washers to create a tight seal. Follow installation instructions carefully and do not over tighten.
• Designed for use in residential and commercial applications for water heater hookups
• For use with water only in accessible locations
• Conforms to ASME A112.18.6/CSAB125.6

The Rheem PROTECH T-O-D Style Single-Pole Lower Thermostat is ideal for use in 2-element residential water heaters and can replace APCOM-style thermostats. These water heaters often have a "non-simultaneous" design, which means only one element is on at any given time. This thermostat has a temperature-sensitive bi-metal disc to deliver snap action to the contacts.

• Fits most brands: Rheem, Ruud, Richmond, GE, State, Kenmore, Bradford White, AO Smith, American, Craftmaster, Lochinvar, Reliance, GS Wood, Mor-Flo and Whirlpool
• Direct replacement for PROE30 T2 RH95, PROE40 M2 RH95, PROE50 T2 RH95, PROE28 S2 RH95, PROE30 S2 RH95 B, PROE36 S2 RH95, PROE38 S2 RH95 B
• For use in 2-element water heaters
• Replaces APCOM-style thermostats
• Temperature-sensitive bi-metal disc delivers snap action to the contacts
• Energy-efficient range setting from 90 degree F to 150 degree F
• Speed and force of contact separation provide a long-lasting, dependable performance at high electrical loads
• Durable metal and plastic construction
• Manual reset switch helps prevent overheating
• UL and CSA listed for safety
• 1 year limited warranty
• California residents see prop 65 warnings

• Recirculation Wireless Button 200 Series
• Rinnai Recirculation Wireless Button 200 Series
• Recirculation Wireless Button 200 Series
• MFG# RPB200

The Backer EHP Inc. copper based sheathed water heater available in both high and low watt densities provides a great solution for heating water with our completely tinned sheath and screw plug design to minimize galvanic action. Multiple water heater manufacturers now use this type of sheathed element as original equipment. Available replacements are the standard square flange and the straight thread screw plug.

• Sheath material platted copper sheath and platted steel screw plug
• Volt: 240-Volt
• Watt: 4500-Watt
• Storage tank type: storage tank is required to have a screw plug spud receptacle

The Camco Plastic Upper Thermostat is ideal for use with electric residential water heaters that have both an upper and lower heating element. There is a built-in safety switch to prevent over-heating. Instructions and wiring diagram are included.

• For use with residential electric water heaters
• Compatible with State, A.O. smith and other water heater brands
• CSA Listed and UL Listed for USA and Canada
• Plastic construction
• Apcom style WH10A
• Upper thermostat
• Factory pre-set at 120 degree F (hot)
• Adjustable temperature
• Plastic terminal protector included
• Application voltage: 240-Volt/208-Volt/120-Volt
• High limit control

The Backer EHP Inc. copper based sheathed water heater available in both high and low watt densities provides a great solution for heating water with our completely tinned sheath and screw plug design to minimize galvanic action. Multiple water heater manufacturers now use this type of sheathed element as original equipment. Available replacements are the standard square flange and the straight thread screw plug.

• Sheath material platted copper sheath and platted steel screw plug
• Volt: 240-Volt
• Watt: 4500-Watt
• Storage tank type: storage tank is required to have a recessed tank flange

The Backer EHP Inc. copper based sheathed water heater available in both high and low watt densities provides a great solution for heating water with our completely tinned sheath and screw plug design to minimize galvanic action. Multiple water heater manufacturers now use this type of sheathed element as original equipment. Available replacements are the standard square flange and the straight thread screw plug.

• Sheath material platted copper sheath and platted steel screw plug
• Volt: 240-Volt
• Watt: 4500-Watt
• Design type high watt density fold back (2-passes)

This thermostat is designed to replace Therm-O-Disc style 59T/66T thermostats on residential water heaters. It has adjustable temperature settings, pre-set at 120 degree F by the manufacturer. Meets specification lengths, AO Smith, Bradford White, Craft master, GE, GSW, Kenmore, Maytag, Reliance, Richmond, Rheem, Russ, Sears, State and Whirlpool brand water heaters.

• UL and CSA listed
• 1-year limited warranty
• Energy efficient temperature range setting
• Application voltage 240-Volt/208-Volt/277-Volt/120-Volt/480-Volt
• High limit control
• Temperature can be set from 90 degree to 150 degree
• Built-in safety switch to prevent overheating
• Wiring diagram included
• For electric water heaters
• Upper thermostat

This 3/4 inch temperature and pressure relief valve is used to provide automatic temperature and pressure protection to hot water supply tanks and hot water heaters up to 105,000 BTU/hr. This valve is ASME rated and CSA listed. Temperature relief is 210 degree F (99 degree C),emperature and pressure protection to hot water supply tanks and hot water heaters up to 105,000 BTU/hr. It features a brass body with NPT male inlet and NPT female outlet connections, unique thermostat with special thermo-bonded coating, and a test lever. Model 100XL-8 is also available with 8 inch (200mm) extension thermostat. Series 100XL is ASME rated and CSA listed. Temperature relief is 210 degree F (99 degree C), Pressure relief range is 75 to 150psi (5.2 to 10.3 bar). Standard pressure settings are 75, 100, 125, or 150psi (5.27, 7.03, 8.79, or 10.55 bar).

• Required safety device on all water heaters
• Prevents water heater from blowing up
• Brass body construction
• Temperature relief is 210 degree F (99 degree C)
• Used to provide automatic temperature and pressure protection to hot water supply tanks and hot water heaters up to 105,000 BTU/hr
• ASME rated, CSA Listed
• Features unique thermostat with special thermo-bonded coating
• Includes test lever and stainless steel spring
• ANSI Z21.22 certified

The 3/4 in. x 18 in. Tectite by Apollo Water Heater Connector with Factory Integrated Ball Valve was designed for the fast and simple installation of hot and cold water lines to water heaters. After applying pipe thread tape to the MNPT nipples on your water heater, thread the FNPT end of the Water Heater connector onto the tank and tighten with pliers. Then simply push the Tectite by Apollo Push-To-Connect end onto Copper, PEX, or CPVC pipes and your water heater is connected. The Integrated Ball Valve on the Tectite by Apollo Water Heater Connector provides a quarter-turn, single handle shut-off. The braided stainless steel lines are available in different lengths from 12 in. - 24 in. (without Ball Valve) and are also available in Corrugated Stainless Steel. Tectite by Apollo Water Heater Connectors dramatically reduce water heater installation times.

• Constructed of lead free dezincification resistant (DZR) brass and braided stainless steel for superior reliability and strength
• Push-to-connect joints require no heat, solder, solvents or tools
• Push-to-connect design allows for a simple and fast installation of water heaters to any combination of copper, PEX, CPVC or PE-RT pipe
• Fittings can be rotated after being installed for ease of use in tight spaces
• Ideal for potable water and hydronic heating applications
• Quarter turn lever handle for simple flow control
• Meets UPC, IPC, and cUPC standard requirements and listed by IAPMO and listed to ASSE 1061/NSF 58
• Demount clip allows for valve removal (included)
• Approved for behind-the-wall with no access and burial
• Corrosion resistant for greater longevity
• Maximum working pressure of 200 psi and maximum temperature of 250 degree F

The Rheem PROTECH T-O-D Style Upper-Element Thermostat is the most popular upper thermostat used in residential electric water heaters. These water heaters often have a "non-simultaneous" design, which means that only 1 heating element is on at any given time. This type of thermostat is for use in 2-element water heaters.

• Fits most brands: rheem, ruud, richmond, ge, state, kenmore, bradford white, ao smith, American, craft master, lochinvar, reliance, gs wood, mor-flo and whirlpool
• Direct replacement for PROE30 T2 RH95, PROE40 M2 RH95, PROE50 T2 RH95, PROE28 S2 RH95, PROE30 S2 RH95 B, PROE36 S2 RH95, PROE38 S2 RH95 B
• For use in 2-element water heaters
• Replaces APCOM-style thermostats
• Temperature-sensitive bi-metal disc delivers snap action to the contacts
• Energy-efficient range setting from 90° F to 150° F
• Speed and force of contact separation provide a long-lasting, dependable performance at high electrical loads
• Durable metal and plastic construction
• Manual reset switch helps prevent overheating
• UL and CSA Listed for safety
• 1-year limited warranty
• California residents see prop 65 warnings

The 3/4" DUXLC Dielectric Union is utilized on potable water applications for protection against piping system deterioration caused by galvanic and stray current corrosion. Required where dissimilar metals are used in piping systems, materials for the 3/4" DUXLC include a zinc-coated steel body, union nut, bolts, and nuts, as well as cast steel flanges, low lead brass tailpiece, nylon insulator, and EPDM gaskets. Its maximum working water pressure is 250 psi for threaded fittings and 175 psi for flanged fittings, with a 180 degree F maximum working water temperature. The 3/4" DUXLC comes standard with a female iron pipe x female copper sweat joint.

• Multiple size options for versatile installation
• Couples dissimilar piping materials for ultimate convenience and low installation costs
• High protection from piping deterioration
• Female iron pipe x female copper sweat connection comes standard
• Certified to NSF/ANSI 372 by IAPMO R&T
• Easy To Install
• Dielectric Union
• Commonly used on residential water heaters
• installed on potable water lines
• 175 maximum pressure

The Tough Water Heater pan is the toughest water heater drain pan you can buy. The Pro Series Pan is approved for use with either Electric or Gas Water Heaters. It's made from SecureFLX, which is the safest, strongest and most innovative polymer on the market. This pan line is extremely tough, extremely flexible, and is approved by the ICC to be in compliance with the IPC, UPC, IRC and NSPC.

• Approved for use with either gas or electric water heaters
• Virtually indestructible, flexible, self-extinguishing
• ICC-ES approved compliance with the IPC, UPC IRC, and NSPC
• Easy no lift tank installs
• Available in multiple sizes: 21 in., 23 in., 25 in., 27 in., 31 in.
• Made from SecureFLX, which is the safest, strongest and most innovative polymer on the market
• Extremely tough
• Extremely flexible
• Includes custom fitting
• Ideal for all applications

The 3/4 in. x 18 in. Tectite by Apollo Water Heater Connector was designed for the fast and simple installation of hot and cold water lines to water heaters. After applying pipe thread tape to the MNPT nipples on your water heater, thread the FNPT end of the Water Heater connector onto the tank and tighten with pliers. Then simply push the Tectite by Apollo Push-To-Connect end onto Copper, PEX, or CPVC pipes and your water heater is connected. The stainless steel braided connectors are available in different lengths from 12 in. - 24 in. (without Ball Valve) and are also available in Corrugated Stainless Steel.

• Constructed of lead free dezincification resistant (DZR) brass and braided stainless steel for superior reliability and strength
• Push-to-connect joints require no heat, solder, solvents or tools
• Push-to-connect design allows for a simple and fast installation of water heaters to any combination of copper, PEX, CPVC or PE-RT pipe
• Fittings can be rotated after being installed for ease of use in tight spaces
• Ideal for potable water and hydronic heating applications
• Meets UPC, IPC, and cUPC standard requirements and listed by IAPMO and listed to ASSE 1061/NSF 59
• Demount clip allows for valve removal (included)
• Corrosion resistant for greater longevity
• Maximum working pressure of 200 psi
• Maximum temperature of 250 degree F

With the Water Heater Controls, only 4 models are needed to replace multiple AO Smith and Bradford White controls. You can consolidate your inventory while opening up more sales opportunities and capturing more business. Plus, with the affordable cost and easy installation, You will make more profits per job all while delivering great value and quality for your customers.

• Service AO Smith and Bradford white natural gas water heaters
• Status LED trims repair time by up to 30 minutes
• Resettable emergency temperature cutoff reduces cost and labor time by eliminating valve replacement
• Bigger pilot flame; reduces customer callbacks
• Accurate temperature sensing improves comfort and eliminates scalding risk
• Anti-scaling algorithms protect children and elderly from water exceeding the set point
• 2 insulation sizes
• Order products straight from Honeywell for quicker turnaround times
• Self-powered - no electricity required
• Modern design and intuitive controls for ease of use

Sharkbite Max Ball Valve Slip 3/4" Model UR24736. Mfg #UR24736

• Can Be Installed On Wet Lines And Pressure Tested Immediately
• Stainless steel retainer adds strength and durability

• Superior full port potable water connectors for water heaters and water treatment. Connectors are more bendable and flexible than copper. They will not discolor corrode rust crimp or kink.
• 3/4 in. I.D. Stainless Steel Flex Connector with 1 in. FIP x 3/4 in. FIP x 18 in.
• Extremely Flexible
• Lifetime Warranty
• Flows Approximately 135% More Than Braided Type
• Perfect For Water Heaters, Both Tankless And Storage Type
• Kink And Crimp Free
• Chrome-Plated Brass Nuts
• Bright Annealed
• Will Not Corrode Or Rust
• No Dielectric Union Required
• Resists Work Hardening
• Working Pressure 200 Psi
• Burst Pressure Approximately 1850 Psi
• No Sweat Installation
• MFG# SWC134-18

The Home-Flex 3/4 in. FIP x 3/4 in. FIP x 15 in. L Stainless Steel Corrugated Water Connector is designed for use in residential and commercial applications for water heater hookups. It is more flexible when compared copper corrugated products due to its kink-free installation. Engineered of flexible lead free stainless steel, attached end fittings and built-in dielectric sleeves, it is the ideal choice for both homeowners and contractors. Extremely durable corrugated stainless-steel construction Built in dielectric sleeves negates the need for a separate dielectric union Easily adapts to water heaters with standard male pipe threads IAPMO certified.

• Extremely durable corrugated stainless-steel construction
• Built in dielectric sleeves eliminates the need for a separate dielectric union.
• Easily adapts to water heaters with standard male pipe threads
• IAPMO certified
• Corrugated stainless steel tubing is .01" / 25mm thick.
• 15 in. L; Minimum recommended bend radius: 2.5 in.
• FIP connections
• Chrome plated brass supply nuts.
• Soft, thick rubber washer to create a tight seal. Follow installation instructions carefully and do not over tighten.
• Designed for use in residential and commercial applications for water heater hookups
• Conforms to ASME A112.18.6/CSAB125.6

This is an Electric Water Heater Installation Kit by HOME-FLEX. It contains 2 flexible water connectors. This kit makes it easier to install your water heater.

• Kit contains two 3/4 in. FIP x 3/4 in. FIP x 18 in. long corrugated stainless steel water connectors that can be used for both hot and or cold water connections
• Includes 2 compression adapters for making connections to 3/4 in. copper water pipes
• White thread sealing tape included
• Bright stainless steel finish on water connectors
• For electric water heaters
• Durable construction
• Full kit
• Fittings included
• Easy to use
• Female threaded ends

Precisely engineered accessories can add even more reliability, convenience and flexibility to Rinnai Tankless Water Heaters. With Rinnai Common Venting, up to eight tankless water heater units share the same vent system. This allows for significantly fewer wall or roof cuts, less labor, and longer vent lengths than ever possible with single-unit tankless water heater venting.

• Concentric venting reduces install time and costs
• Engineered concentric venting especially for gas appliances
• Easy assembly/adjustment
• Concentric venting allows for secure connection
• 21 universal non-condensing horizontal termination kit
• HE universal recess box
• White finish
• Package quantity 1
• Plastic construction
• 1-year limited warranty
• *Note. Rinnai is changing the language in its warranty terms and conditions found in the current User Installation manuals. The existing statement will be replaced by the following: "This Limited Warranty applies only to products that are installed in the United States and Canada. Improper installation may void this Limited Warranty. It is recommended that a trained and qualified professional who has attended a Rinnai installation training class complete your installation." All warranties (old or new manual) will be honored as written above.

The Noritz tankless pipe cover covers piping underneath your tankless. This provides a cleaner finish for indoor and outdoor installations. It is weather resistant under all conditions. Compatible with NORITZ NRC98 and NRC111 models.

• Made of durable powder coated steel (or stainless-steel for select models)
• Conceals the piping underneath the water heater to provide a cleaner installation
• Compatible with all water heater models and requires light assembly
• Requires very light assembly
• Kit comes complete with all brackets, knobs, and screws necessary for installation
• Accessory will protect your piping from all environmental factors
• PC-3S is made of stainless steel material, which allows for extended product durability
• Do not connect electrical power to the unit until all electrical wiring has been completed
• An installation manual is including in this pipe cover kit
• Installation must comply with all electrical codes

Precisely engineered accessories can add even more reliability, convenience and flexibility to Rinnai Tankless Water Heaters. With Rinnai Common Venting, up to 8 tankless water heater units share the same vent system. This allows for significantly fewer wall or roof cuts, less labor, and longer vent lengths than ever possible with single-unit tankless water heater venting.

• Lead free
• Dimensions: 9.3 in. x 6.1 in. x 3 in.
• Water heater accessory
• Country of origin: Japan
• Tankless water heaters (condensing) and m-series boilers
• Brass finish
• Package quantity: 1
• Lead free brass construction
• 1-year limited warranty
• *Note. Rinnai is changing the language in its warranty terms and conditions found in the current User Installation manuals. The existing statement will be replaced by the following: "This Limited Warranty applies only to products that are installed in the United States and Canada. Improper installation may void this Limited Warranty. It is recommended that a trained and qualified professional who has attended a Rinnai installation training class complete your installation." All warranties (old or new manual) will be honored as written above.

Fluidmaster water heater supply connectors are built to last. Made of a tough core covered with braided stainless-steel wire. These connectors exceed code requirements for durability.

• Exceptional flexibility for fast, easy installation
• Won't kink or crease, even in the tightest of spaces
• Heavy-duty brass hex nuts are easy to grip and nickel plated for durability
• Exceeds all code requirements for flexible water connectors
• 18 in. L
• 3/4 in. FIP x 3/4 in. compression coupling
• Lead free
• 5-year warranty
• Highly flexible to resist kinks and creases in tight spaces
• Repair parts that are made to last

The TP1100AE-3C-150C Temperature and Pressure Relief Valve has a 3" probe and is set at 150 psi, and is utilized on water heating storage vessels for protection against over-temperature or excessive pressure, primarily on water heaters in residential applications. The copper thermal element is epoxy-coated for added theft protection. Materials include cast brass or bronze for the main valve body, stainless steel internals and springs, and epoxy-coated copper tube probes. The TP1100AE model includes an extended body (2.1 inch shank).

• Commonly used on residential water heaters
• Protection from excessive pressure reduces risk of damage in residential applications
• Thermal element protected with epoxy coating
• CSA Compliance to ANSI Z21.22/CSA 4.4
• Epoxy-coating effectively protects the thermal element
• Certified to ASME Section IV by National Board
• Available in 75, 100, 125, 150, and 175 psi setting
• Thermal element protected with epoxy coating

• Tune up kit includes: upper and lower thermostat, two 4500W elements
• Renews heater performance and efficiency
• Kit includes all new heating elements and thermostats
• OEM manufactured components
• Instructions included

The P1000AXL-150C Pressure Relief Valve is set at 150 psi and utilized on water heating storage vessels for protection against over-temperature or excessive pressure (not for steam service). Primarily used on storage tanks, P1000AXL materials include cast brass or bronze for the main valve body, quality stainless steel 300 series internals, stainless steel springs, and FDA approved, epoxy-coated copper tube probes. Multiple pressure relief settings and inlet/outlet connection options provide easy, ultra versatile installation capabilities, and the P1000AXL assembly shall be used where pressure only relief is required.

• Eliminates risk of over-pressure of storage tanks
• Epoxy-coating adds extra protection
• Pressure relief valve set at 150 psi
• CSA Compliance to ANSI Z21.22/CSA 4.4
• Certified to ASME Section IV by National Board
• Pressure relief valve settings of 30, 75, 125, and 150 psi offer versatility

Rectorseal 20" Aluminum Water Heater Pan With CPVC Adapter. Tank Type Water Heater Drain Pan. .024" thick 1050 aluminum. 1" CPVC fitting with rubber gasket. Can be installed under either gas or electric water heaters. Meets International Plumbing Code. Catches water from leaks, spills or drips and prevents costly floor water damage. Mfg #WHPA20C

• Tank Type Water Heater Drain Pan
• .024" thick 1050 aluminum
• 1" CPVC fitting with rubber gasket
• Can be installed under either gas or electric water heaters

For gas and electric tanks. ICC-ES approved compliance with the IPC, UPC and IRC Compliant with the NSPC. Eliminating the need to carry both metal and plastic pans. Less expensive alternative to metal. Virtually indestructible and up to 2X as thick as ICC minimum. Flexible Space saver pan design. Self-extinguishing. Easy no lift tank installs.

• Approved for use with either gas or electric water heaters
• Virtually indestructible, flexible, self-extinguishing
• ICC-ES approved compliance with the IPC, UPC IRC and NSPC
• Easy no lift tank installs
• Available in multiple sizes: 21 in., 23 in., 25 in., 27 in., 31 in.
• Made from SecureFLX, which is the safest, strongest and most innovative polymer on the market
• Extremely tough
• Extremely flexible
• Includes custom fitting
• Ideal for all applications

The Homewerks Dielectric Union prevents electrolysis or galvanic action when connecting dissimilar materials. Pressure rated at 150 psi at 180 degree F. Complies with 0.25% weighted average lead content on wet surfaces.

• 1-1/2 in. dielectric union
• Prevents electrolysis or galvanic action when connecting stainless steel and copper pipe
• Pressure rated at 150 psi at 180 degree F
• Complies with 0.25% weighted average lead content on wet surfaces
• Compatible with copper and steel
• Components of this union are not interchangeable with other manufacturer's unions
• Connection type: FIP x SWT

Black iron pipe construction for use with gas. Protects against destructive effect of galvanic and stray current corrosion; for residential, commercial and industrial applications; supplied with GA gaskets suitable for water, air, oil, natural gas, gasoline, propane, kerosene, mineral oil and alkalies; rated to 210 degree F at 250 psi conforming to ANSI B16.39. Pipe threads are in accordance with ANSI B2.1.

• Black iron pipe construction for use with gas
• Protects against destructive effect of galvanic and stray current corrosion
• for residential, commercial and industrial applications
• Supplied with GA gaskets suitable for water, air, oil, natural gas, gasoline, propane, kerosene, mineral oil and alkalies
• Rated to 210 degree F at 250 psi
• Pipe threads are in accordance with ANSI B2.1
• Conforming to ANSI B16.39
• 100% leak tested
• Buna seats
• Prop 65 available

Proper water heater repair and maintenance requires you to drain your water heater from time to time. The Rheem PROTECH Water Heater Drain Valves offers a durable, high quality replacement that will provide years of service. This valve has brass construction for durability and resists rust and corrosion. The tamper proof valve will help guard against opening the drain valve accidentally.

• Direct replacement for Rheem, Ruud and Richmond water heaters
• Fits most brands: Rheem, Ruud, Richmond, GE, State, Kenmore, Bradford White, AO Smith, American, Craftmaster, Lochinvar, Reliance, GS Wood, Mor-Flo and Whirlpool
• Direct replacement on models: PROE30 T2 RH95, PROE40 M2 RH95, PROE50 T2 RH95, PROE28 S2 RH95, PROE36 S2 RH95, PROG50-38U RH62 EC1
• 4 in. L
• Screw head operated valve helps guard against accidental discharge
• Long performance life
• Easy installation
• Durable construction
• 1 year limited warranty
• Resists corrosion
• Genuine OEM quality
• California residents see prop 65 warnings